[22301] trunk/dports/PortIndex

Sun Feb 25 12:38:29 PST 2007

Revision: 22301
          http://trac.macosforge.org/projects/macports/changeset/22301
Author:   dluke at macports.org
Date:     2007-02-25 12:38:29 -0800 (Sun, 25 Feb 2007)

Log Message:
-----------

Total number of ports parsed:	3785 
Ports successfully parsed:	3785	 
Ports failed:			0

Modified Paths:
--------------
    trunk/dports/PortIndex

Modified: trunk/dports/PortIndex
===================================================================

--- trunk/dports/PortIndex	2007-02-25 20:09:19 UTC (rev 22300)
+++ trunk/dports/PortIndex	2007-02-25 20:38:29 UTC (rev 22301)
@@ -431,7 +431,7 @@
 gerbv 514
 description {Gerber Viewer (gerbv) is a viewer for Gerber files} portdir cad/gerbv homepage http://gerbv.sourceforge.net/ epoch 0 platforms darwin depends_lib {lib:libgtk2:gtk2 lib:libpng:libpng} name gerbv long_description {Gerber Viewer (gerbv) is a viewer for Gerber files. Gerber files are generated from PCB CAD system and sent to PCB manufacturers as basis for the manufacturing process. The standard supported by gerbv is RS-274X.} maintainers darwinports at zonque.org categories cad version 1.0.1 revision 0
 gtkwave 458
-description {A viewer for common electronic CAD waveform files.} portdir cad/gtkwave homepage http://home.nc.rr.com/gtkwave epoch 0 platforms darwin depends_lib port:gtk2 name gtkwave long_description {GTKWave is a fully featured GTK+ based wave viewer for Unix and Win32 which reads LXT, LXT2, VZT, and GHW files as well as standard Verilog VCD/EVCD files and allows their viewing.} maintainers gwright at macports.org categories cad version 3.0.14 revision 0
+description {A viewer for common electronic CAD waveform files.} portdir cad/gtkwave homepage http://home.nc.rr.com/gtkwave epoch 0 platforms darwin depends_lib port:gtk2 name gtkwave long_description {GTKWave is a fully featured GTK+ based wave viewer for Unix and Win32 which reads LXT, LXT2, VZT, and GHW files as well as standard Verilog VCD/EVCD files and allows their viewing.} maintainers gwright at macports.org categories cad version 3.0.22 revision 0
 dgpsip 1608
 portdir comms/dgpsip description {Differential GPS over IP communication device} platforms {darwin freebsd} name dgpsip version 1.32 categories comms homepage http://www.wsrcc.com/wolfgang/gps/dgps-ip.html revision 0 epoch 0 maintainers nomaintainer at macports.org long_description {On a stationary GPS without a differential correction signal, you should see a 20 m average radius {drunken walk} pattern. On the same receiver with DGPS corrections and a good view of the sky, the error the same receiver with DGPS corrections and a good view of the sky, the error should be reduced to approximately 2 m average radius. If you've always wanted to know exactly where your house is located without that annoying GPS wander, but didn't want to spend the money for a DGPS radio, here is your big chance! I'd like to announce a fun DGPS hack. I've written a small Un*x server and client for redistributing DGPS correction signals over the Net. Basically the server grabs the serial byte stream fr
 om my DGPS radio and sends it off over a TCP connection. The client does the same thing but in reverse. The result is that you can receive the local DGPS corrections from absolutely anywhere by using the Internet as the world's largest extension cord. You'll still need to be within 1000 miles or so of San Francisco, California, USA for best results. However chances are better error will still be reduced if you are 2000 to 3000 miles away. Several respondents from 2000 miles away have noted that the remote differential signals have diminished the SA-induced position and velocity errors by approximately 3 times.}
 gnokii 639
@@ -1180,8 +1180,8 @@
 portdir devel/macstl description {C++ header library} platforms darwin name macstl version 0.2.2 categories devel homepage http://www.pixelglow.com/macstl/ revision 0 epoch 0 maintainers toby at opendarwin.org long_description {The C++ header library designed to bring the Macintosh into the world of modern generic programming.}
 mercurial 957
 portdir devel/mercurial description {A fast, lightweight, distributed SCM system written in Python.} depends_lib {{path:${prefix}/bin/python2.4:python24}} name mercurial categories {devel python} version 0.9.3 homepage http://www.selenic.com/mercurial/ revision 0 epoch 0 maintainers deric at macports.org long_description {Mercurial is a fast, lightweight Source Control Management system designed for efficient handling of very large distributed projects. A distributed SCM tool is designed to support a model in which each Repository is loosely coupled to many others. Each Repository contains a complete set of metadata describing one or more projects. These repositories may be located almost anywhere. Individual developers only need access to their own repositories, not to a central one, in order to commit changes. Changes can be share via the builtin webserver, CGI, SSH or a stream of patch emails. Mercurial supports Apples' FileMerge for merges.}
-mhash 399
-variants darwin_8 description {provides easy access strong hashes} portdir devel/mhash homepage http://mhash.sourceforge.net/ epoch 0 platforms {darwin freebsd} name mhash long_description {Libmhash is a library which implements some hash algorithms like crc32, md5 and sha-1.} maintainers {ryandesign at macports.org openmaintainer at macports.org} categories {devel security} version 0.9.7.1 revision 0
+mhash 411
+variants {darwin_8 universal} description {provides easy access strong hashes} portdir devel/mhash homepage http://mhash.sourceforge.net/ epoch 0 platforms {darwin freebsd} name mhash long_description {Libmhash is a library which implements some hash algorithms like crc32, md5 and sha-1.} maintainers {ryandesign at macports.org openmaintainer at macports.org} categories {devel security} version 0.9.8.1 revision 0
 mico 421
 variants powerpc portdir devel/mico description {Fully compliant CORBA implementation} homepage http://www.mico.org/ epoch 0 platforms darwin name mico depends_lib {port:openssl lib:libncurses:ncurses} long_description {MICO is a mature, secure, robust, fully standards-compliant implementation of the CORBA standard.} maintainers {roederja at student.ethz.ch darrell at schiebel.us} version 2.3.12 categories devel revision 0
 missingh 379
@@ -2308,8 +2308,8 @@
 description {Library for read MNG, an extension to PNG.} portdir graphics/libmng homepage http://libmng.sourceforge.net/ epoch 0 platforms darwin depends_lib {lib:libjpeg:jpeg lib:liblcms:lcms} name libmng long_description {This library extends PNG supportto include Multiple Network Graphics this adds animation capabilitys to PNG.} maintainers lomion at opendarwin.org categories graphics version 1.0.8 revision 0
 libpixman 379
 portdir graphics/libpixman description {Pixel region Library} platforms darwin name libpixman version 0.1.6 categories graphics homepage http://cairographics.org/ revision 0 epoch 0 maintainers nomaintainer at macports.org long_description {libpixman is a generic library for manipulating pixel regions. A PixRegion is a set of Y-X banded rectangles that cover the desired region.}
-libpng 852
-variants darwin_8 portdir graphics/libpng description {Library for manipulating PNG images} homepage http://www.libpng.org/pub/png/ epoch 0 platforms {darwin openbsd freebsd sunos linux} name libpng depends_lib port:zlib maintainers {ryandesign at macports.org waqar at macports.org} long_description {Libpng was written as a companion to the PNG specification, as a way to reduce the amount of time and effort it takes to support the PNG file format in application programs. Most users will not have to modify the library significantly, advanced users may want to modify it more. The library was coded for both users. All attempts were made to make it as complete as possible, while keeping the code easy to understand. Currently, this library only supports C. Support for other languages is being considered.} version 1.2.16 categories graphics revision 0
+libpng 864
+variants {darwin_8 universal} portdir graphics/libpng description {Library for manipulating PNG images} homepage http://www.libpng.org/pub/png/ epoch 0 platforms {darwin openbsd freebsd sunos linux} name libpng depends_lib port:zlib maintainers {ryandesign at macports.org waqar at macports.org} long_description {Libpng was written as a companion to the PNG specification, as a way to reduce the amount of time and effort it takes to support the PNG file format in application programs. Most users will not have to modify the library significantly, advanced users may want to modify it more. The library was coded for both users. All attempts were made to make it as complete as possible, while keeping the code easy to understand. Currently, this library only supports C. Support for other languages is being considered.} version 1.2.16 categories graphics revision 0
 libungif 399
 portdir graphics/libungif description {Tools and library routines for working with GIF images} platforms darwin name libungif version 4.1.4 categories graphics homepage http://sourceforge.net/projects/libungif/ revision 0 epoch 0 maintainers toby at opendarwin.org long_description {GIF loading and saving shared library. (Saving uses an uncompressed gif algorithm that does not use LZW compression.)}
 libwmf 617
@@ -3665,7 +3665,7 @@
 driftnet 527
 description {Watch the pictures go by on your net} portdir net/driftnet homepage http://www.ex-parrot.com/~chris/driftnet epoch 0 platforms darwin depends_lib {lib:libjpeg:jpeg lib:libpcap:libpcap lib:libungif:libungif lib:libgtk.1:gtk1} name driftnet long_description {Inspired by EtherPEG, Driftnet is a program which listens to network traffic and picks out images from TCP streams it observes. Fun to run on a host which sees lots of web traffic.} maintainers gwright at opendarwin.org categories net version 0.1.6 revision 1
 drill 431
-description {A dig style dnssec aware dns debugging tool} portdir net/drill homepage http://www.nlnetlabs.nl/dnssec/drill.html epoch 0 platforms darwin depends_lib {port:openssl port:ldns} name drill long_description {Drill is a tool ala dig from BIND. It was designed with DNSSEC in mind and should be a useful debugging/query tool for DNSSEC.} maintainers roederja at student.ethz.ch categories {net devel} version 1.1.0 revision 0
+description {A dig-style dnssec-aware dns debugging tool} portdir net/drill homepage http://www.nlnetlabs.nl/dnssec/drill.html epoch 0 platforms darwin depends_lib {port:openssl port:ldns} name drill long_description {Drill is a tool ala dig from BIND. It was designed with DNSSEC in mind and should be a useful debugging/query tool for DNSSEC.} maintainers roederja at student.ethz.ch categories {net devel} version 1.1.0 revision 0
 dsniff 871
 variants {darwin_7 darwin_8} depends_build {port:libnet lib:libnids:libnids} portdir net/dsniff description {network auditing and penetration testing tools} homepage http://monkey.org/~dugsong/dsniff/ epoch 0 platforms darwin name dsniff depends_lib port:libpcap maintainers toby at opendarwin.org long_description {dsniff is a collection of tools for network auditing and penetration testing. dsniff, filesnarf, mailsnarf, msgsnarf, urlsnarf, and webspy passively monitor a network for interesting data (passwords, e-mail, files, etc.). arpspoof, dnsspoof, and macof facilitate the interception of network traffic normally unavailable to an attacker (e.g, due to layer-2 switching). sshmitm and webmitm implement active monkey-in-the-middle attacks against redirected SSH and HTTPS sessions by exploiting weak bindings in ad-hoc PKI.} version 2.3 categories net revision 2
 dsniff-devel 885
@@ -5143,7 +5143,7 @@
 py-cherrypy 566
 portdir python/py-cherrypy description {Object-oriented web development framework} depends_lib {{path:${prefix}/bin/python2.4:python24}} name py-cherrypy categories {python www} version 2.2.1 homepage http://www.cherrypy.org/ revision 0 epoch 0 maintainers yuhei at pop21.odn.ne.jp long_description {CherryPy is a pythonic, object-oriented web development framework. CherryPy allows developers to build web applications in much the same way they would build any other object-oriented Python program. This usually results in smaller source code developed in less time.}
 py-chm 409
-description {PyCHM is a set of Python bindings for Jed Wing's chmlib.} portdir python/py-chm homepage http://gnochm.sourceforge.net/pychm.html epoch 0 platforms darwin name py-chm depends_lib {{path:${prefix}/bin/python2.4:python24} port:chmlib} long_description {{PyCHM is a set of Python bindings for Jed Wing's chmlib.}} maintainers mww at opendarwin.org version 0.8.3 categories {python textproc} revision 0
+description {PyCHM is a set of Python bindings for Jed Wing's chmlib.} portdir python/py-chm homepage http://gnochm.sourceforge.net/pychm.html epoch 0 platforms darwin name py-chm depends_lib {{path:${prefix}/bin/python2.4:python24} port:chmlib} long_description {{PyCHM is a set of Python bindings for Jed Wing's chmlib.}} maintainers mww at opendarwin.org version 0.8.4 categories {python textproc} revision 0
 py-clamav 377
 description {python interface to the clamav antivirus} portdir python/py-clamav homepage http://norman.free.fr/norman/python/pyclamav/ epoch 0 platforms darwin name py-clamav depends_lib {{path:${prefix}/bin/python2.4:python24} port:clamav} long_description {{python interface to the clamav antivirus}} maintainers mww at opendarwin.org version 0.3.2 categories python revision 0
 py-clientcookie 519
@@ -6696,6 +6696,8 @@
 portdir textproc/dumpasn1 description {an ASN.1 decoder and pretty-printer} platforms darwin name dumpasn1 version 20060622 categories {textproc security} homepage http://www.cs.auckland.ac.nz/~pgut001/ revision 0 epoch 0 maintainers cjr at macports.org long_description {The dumpasn1 program decodes BER and DER-encoded ASN.1 data, and is configured with knowledge of many security-related objects.}
 enca 406
 description {character set analyser} portdir textproc/enca homepage http://trific.ath.cx/software/enca/ epoch 0 platforms darwin depends_lib bin:iconv:libiconv name enca long_description {Enca is an Extremely Naive Charset Analyser. It detects character set and encoding of text files and can also convert them to other encodings.} maintainers mww at opendarwin.org categories textproc version 1.4 revision 0
+enchant 657
+depends_build {bin:glibtoolize:libtool port:pkgconfig} portdir textproc/enchant description {Spellchecker wrapping library} homepage http://www.abisource.com/enchant/ epoch 0 platforms darwin name enchant depends_lib port:glib2 maintainers anant at kix.in long_description {On the surface, Enchant appears to be a generic spell checking library. You can request dictionaries from it, ask if a word is correctly spelled, get corrections for a misspelled word, etc. but all it really does is to provide a uniform wrapper over several popular spell checking libraries including aspell, ispell and AppleSpell.} version 1.3.0 categories {textproc devel} revision 0
 expat 482
 variants {no_static universal} description {XML 1.0 parser written in C} portdir textproc/expat homepage http://expat.sourceforge.net/ epoch 0 platforms {darwin freebsd} name expat long_description {Expat is an XML parser library written in C. It is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags).} maintainers nomaintainer at macports.org categories {textproc devel} version 2.0.0 revision 1
 figlet 261

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.macosforge.org/pipermail/macports-changes/attachments/20070225/8b7072d6/attachment.html
