[34829] trunk/dports/PortIndex

Fri Mar 7 12:44:30 PST 2008

Revision: 34829
          http://trac.macosforge.org/projects/macports/changeset/34829
Author:   dluke at macports.org
Date:     2008-03-07 12:44:28 -0800 (Fri, 07 Mar 2008)

Log Message:
-----------

Total number of ports parsed:	4546 
Ports successfully parsed:	4546	 
Ports failed:			0

Modified Paths:
--------------
    trunk/dports/PortIndex

Modified: trunk/dports/PortIndex
===================================================================

--- trunk/dports/PortIndex	2008-03-07 19:43:33 UTC (rev 34828)
+++ trunk/dports/PortIndex	2008-03-07 20:44:28 UTC (rev 34829)
@@ -455,7 +455,7 @@
 gerbv 533
 variants universal portdir cad/gerbv description {Gerber Viewer (gerbv) is a viewer for Gerber files} homepage http://gerbv.sourceforge.net/ epoch 0 platforms darwin name gerbv depends_lib {lib:libgtk2:gtk2 lib:libpng:libpng} maintainers darwinports at zonque.org long_description {Gerber Viewer (gerbv) is a viewer for Gerber files. Gerber files are generated from PCB CAD system and sent to PCB manufacturers as basis for the manufacturing process. The standard supported by gerbv is RS-274X.} version 1.0.1 categories cad revision 0
 gtkwave 476
-variants universal portdir cad/gtkwave description {A viewer for common electronic CAD waveform files.} homepage http://home.nc.rr.com/gtkwave epoch 0 platforms darwin name gtkwave depends_lib port:gtk2 maintainers gwright at macports.org long_description {GTKWave is a fully featured GTK+ based wave viewer for Unix and Win32 which reads LXT, LXT2, VZT, and GHW files as well as standard Verilog VCD/EVCD files and allows their viewing.} version 3.1.4 categories cad revision 0
+variants universal portdir cad/gtkwave description {A viewer for common electronic CAD waveform files.} homepage http://home.nc.rr.com/gtkwave epoch 0 platforms darwin name gtkwave depends_lib port:gtk2 maintainers gwright at macports.org long_description {GTKWave is a fully featured GTK+ based wave viewer for Unix and Win32 which reads LXT, LXT2, VZT, and GHW files as well as standard Verilog VCD/EVCD files and allows their viewing.} version 3.1.6 categories cad revision 0
 dgpsip 1614
 variants universal description {Differential GPS over IP communication device} portdir comms/dgpsip homepage http://www.wsrcc.com/wolfgang/gps/dgps-ip.html epoch 0 platforms {darwin freebsd} name dgpsip long_description {On a stationary GPS without a differential correction signal, you should see a 20 m average radius {drunken walk} pattern. On the same receiver with DGPS corrections and a good view of the sky, the error the same receiver with DGPS corrections and a good view of the sky, the error should be reduced to approximately 2 m average radius. If you've always wanted to know exactly where your house is located without that annoying GPS wander, but didn't want to spend the money for a DGPS radio, here is your big chance! I'd like to announce a fun DGPS hack. I've written a small Un*x server and client for redistributing DGPS correction signals over the Net. Basically the server grabs the serial byte stream from my DGPS radio and sends it off over a TCP connection. The
  client does the same thing but in reverse. The result is that you can receive the local DGPS corrections from absolutely anywhere by using the Internet as the world's largest extension cord. You'll still need to be within 1000 miles or so of San Francisco, California, USA for best results. However chances are better error will still be reduced if you are 2000 to 3000 miles away. Several respondents from 2000 miles away have noted that the remote differential signals have diminished the SA-induced position and velocity errors by approximately 3 times.} maintainers nomaintainer categories comms version 1.32 revision 0
 gnokii 650
@@ -756,6 +756,8 @@
 variants universal portdir devel/autobuild description {processes output from building software} homepage http://josefsson.org/autobuild/ epoch 0 platforms darwin name autobuild depends_lib bin:perl:perl5.8 maintainers nomaintainer long_description {Autobuild is a package that process output from building software, primarily focused on packages using autoconf and automake, and then generate a HTML summary file, containing links to each build log. The output include project name, version, build host types (cross compile aware), compiler host name, date of build, and indication of success or failure. The output is indexed in many ways to simplify browsing.} version 3.3 categories devel revision 0
 autoconf 766
 variants universal portdir devel/autoconf description {Automatically configures software for compilation} homepage http://www.gnu.org/software/autoconf/ depends_run port:libtool epoch 0 platforms darwin name autoconf depends_lib {bin:perl:perl5.8 port:m4 port:help2man} maintainers nomaintainer long_description {Autoconf is an extensible package of m4 macros that produce shell scripts to automatically configure software source code packages. These scripts can adapt the packages to many kinds of UNIX-like systems without manual user intervention. Autoconf creates a configuration script for a package from a template file that lists the operating system features that the package can use, in the form of m4 macro calls.} version 2.61 categories devel revision 1
+autoconf-archive 823
+variants universal portdir devel/autoconf-archive description {A collection of over 500 reusable Autoconf macros} homepage http://www.gnu.org/software/ac-archive/ epoch 0 platforms darwin name autoconf-archive depends_lib {port:autoconf port:automake} maintainers fernandes.org:andrew long_description {The Autoconf Macro Archive aims to provide a collection of reusable Autoconf macros as free software. The archive currently features more than 500 macros which perform portability tests ranging from compiler support for weird language extensions to automatic generation of sophisticated Automake rules. All these macros have been contributed by friendly supporters of the cause from all over the Internet - this archive is merely a distribution of other people's efforts.} version 2008-02-21 categories devel revision 0
 autoconf213 694
 variants universal description {Automatically configures software for compilation} portdir devel/autoconf213 homepage http://www.gnu.org/software/autoconf/ epoch 0 platforms darwin name autoconf213 long_description {Autoconf is an extensible package of m4 macros that produce shell scripts to automatically configure software source code packages. These scripts can adapt the packages to many kinds of UNIX-like systems without manual user intervention. Autoconf creates a configuration script for a package from a template file that lists the operating system features that the package can use, in the form of m4 macro calls.} maintainers nomaintainer categories devel version 2.13 revision 0
 autogen 597
@@ -786,8 +788,8 @@
 variants {universal redirect darwin_9} description {Boehm-Demers-Weiser conservative garbage collector} portdir devel/boehmgc homepage http://www.hpl.hp.com/personal/Hans_Boehm/gc/ epoch 0 platforms darwin name boehmgc long_description {The Boehm-Demers-Weiser conservative garbage collector can be used as a garbage collecting replacement for C malloc or C++ new. It is also used by a number of programming language implementations that use C as intermediate code.} maintainers waqar at macports.org categories devel version 7.0 revision 0
 boehmgc-devel 557
 variants {universal redirect} description {Boehm-Demers-Weiser conservative garbage collector (devel version)} portdir devel/boehmgc-devel homepage http://www.hpl.hp.com/personal/Hans_Boehm/gc/ epoch 0 platforms darwin name boehmgc-devel long_description {The Boehm-Demers-Weiser conservative garbage collector can be used as a garbage collecting replacement for C malloc or C++ new. It is also used by a number of programming language implementations that use C as intermediate code.} maintainers nomaintainer categories devel version 6.3alpha6 revision 0
-boost 484
-variants {universal darwin_9 darwin python24 python25 icu} depends_build {bin:bjam:boost-jam port:gmake} portdir devel/boost description {Collection of portable C++ source libraries} homepage http://www.boost.org epoch 0 platforms darwin name boost maintainers sanchom at gmail.com long_description {Boost provides free portable peer-reviewed C++ libraries. The emphasis is on portable libraries which work well with the C++ Standard Library.} version 1.34.1 categories devel revision 2
+boost 519
+variants {universal darwin_9 darwin python24 python25 icu} depends_build {bin:bjam:boost-jam port:gmake} portdir devel/boost description {Collection of portable C++ source libraries} homepage http://www.boost.org epoch 0 platforms darwin depends_lib {port:zlib port:bzip2} name boost maintainers sanchom at gmail.com long_description {Boost provides free portable peer-reviewed C++ libraries. The emphasis is on portable libraries which work well with the C++ Standard Library.} version 1.34.1 categories devel revision 2
 boost-build 510
 variants universal portdir devel/boost-build description {Build system for large project software construction} homepage http://www.boost.org epoch 0 depends_run port:boost-jam platforms darwin name boost-build maintainers nomaintainer long_description {Boost.Build is a system for large project software construction, which is simple to use and powerfull. Boost.Build V2 is an onging project to rewrite Boost.Build, improving design and making it more extensible.} version 2.0-m12 categories devel revision 1
 boost-jam 503
@@ -3353,7 +3355,7 @@
 eiffelstudio 723
 variants {universal i386 powerpc} depends_build bin:bzip2:bzip2 portdir lang/eiffelstudio description {The ISE Eiffel Compiler and IDE} homepage http://www.eiffel.com epoch 0 platforms darwin name eiffelstudio depends_lib port:gtk2 maintainers roederja at student.ethz.ch long_description {EiffelStudio is a development environment for the Eiffel programming language developed by Eiffel Software. EiffelStudio includes a combination of tools integrated under a single user interface: compiler, interpreter, debugger, browser, metrics tool, profiler, diagram tool. The user interface rests on a number of specific UI paradigms, in particular pick-and-drop for effective browsing.} version 6.1.71477 categories lang revision 1
 eiffelstudio-devel 735
-variants {universal i386 powerpc} depends_build bin:bzip2:bzip2 portdir lang/eiffelstudio-devel description {The ISE Eiffel Compiler and IDE} homepage http://www.eiffel.com epoch 0 platforms darwin name eiffelstudio-devel depends_lib port:gtk2 maintainers roederja at student.ethz.ch long_description {EiffelStudio is a development environment for the Eiffel programming language developed by Eiffel Software. EiffelStudio includes a combination of tools integrated under a single user interface: compiler, interpreter, debugger, browser, metrics tool, profiler, diagram tool. The user interface rests on a number of specific UI paradigms, in particular pick-and-drop for effective browsing.} version 6.2.72277 categories lang revision 0
+variants {universal i386 powerpc} depends_build bin:bzip2:bzip2 portdir lang/eiffelstudio-devel description {The ISE Eiffel Compiler and IDE} homepage http://www.eiffel.com epoch 0 platforms darwin name eiffelstudio-devel depends_lib port:gtk2 maintainers roederja at student.ethz.ch long_description {EiffelStudio is a development environment for the Eiffel programming language developed by Eiffel Software. EiffelStudio includes a combination of tools integrated under a single user interface: compiler, interpreter, debugger, browser, metrics tool, profiler, diagram tool. The user interface rests on a number of specific UI paradigms, in particular pick-and-drop for effective browsing.} version 6.2.72567 categories lang revision 0
 elk 509
 variants {universal x11} description {Scheme Extension Language Kit} portdir lang/elk homepage http://sam.zoy.org/elk epoch 0 platforms darwin name elk long_description {Elk (the Extension Language Kit) is an implementation of the Scheme programming language. It can be used as a standalone Scheme interpreter, or as an embeddable, reusable extension language subsystem for applications written in C or C++ through the libelk library.} maintainers waqar at macports.org categories lang version 3.99.7 revision 0
 erlang 818
@@ -3393,7 +3395,7 @@
 gcc42 390
 variants {universal odcctools} portdir lang/gcc42 description {The GNU compiler collection} homepage http://gcc.gnu.org/ epoch 0 platforms darwin name gcc42 depends_lib {port:gmp port:mpfr port:libiconv} maintainers mww long_description {The GNU compiler collection, including front ends for C, C++, Objective-C, Objective-C++, Java and Fortran95.} version 4.2.3 categories lang revision 0
 gcc43 743
-variants {universal powerpc odcctools gfortran} variant_desc {odcctools {Use the odcctools instead of the system provided ones - does not work for x64 currently!} gfortran {Enables fortran; this language will be enabled in the final version - this variant is completely untested!}} portdir lang/gcc43 description {The GNU compiler collection, prerelease BETA} homepage http://gcc.gnu.org/ epoch 0 platforms darwin name gcc43 depends_lib {port:gmp port:mpfr port:libiconv} maintainers mww long_description {The GNU compiler collection, including front ends for C, C++, Objective-C and Objective-C++. This is a prerelease BETA version and does not have all available language front ends enabled.} version 4.3-20080228 categories lang revision 0
+variants {universal powerpc odcctools gfortran} variant_desc {odcctools {Use the odcctools instead of the system provided ones - does not work for x64 currently!} gfortran {Enables fortran; this language will be enabled in the final version - this variant is completely untested!}} portdir lang/gcc43 description {The GNU compiler collection, prerelease BETA} homepage http://gcc.gnu.org/ epoch 0 platforms darwin name gcc43 depends_lib {port:gmp port:mpfr port:libiconv} maintainers mww long_description {The GNU compiler collection, including front ends for C, C++, Objective-C and Objective-C++. This is a prerelease BETA version and does not have all available language front ends enabled.} version 4.3-20080306 categories lang revision 0
 gcc44 743
 variants {universal powerpc odcctools gfortran} variant_desc {odcctools {Use the odcctools instead of the system provided ones - does not work for x64 currently!} gfortran {Enables fortran; this language will be enabled in the final version - this variant is completely untested!}} portdir lang/gcc44 description {The GNU compiler collection, prerelease BETA} homepage http://gcc.gnu.org/ epoch 0 platforms darwin name gcc44 depends_lib {port:gmp port:mpfr port:libiconv} maintainers mww long_description {The GNU compiler collection, including front ends for C, C++, Objective-C and Objective-C++. This is a prerelease BETA version and does not have all available language front ends enabled.} version 4.4-20080229 categories lang revision 0
 gccxml 351

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.macosforge.org/pipermail/macports-changes/attachments/20080307/3ca8efe5/attachment-0001.html 
