[50573] trunk/base
jeremyhu at macports.org
jeremyhu at macports.org
Mon May 4 12:31:06 PDT 2009
Revision: 50573
http://trac.macports.org/changeset/50573
Author: jeremyhu at macports.org
Date: 2009-05-04 12:31:06 -0700 (Mon, 04 May 2009)
Log Message:
-----------
base: No longer search for X11 SDK and remove reference to x11prefix
Modified Paths:
--------------
trunk/base/aclocal.m4
trunk/base/configure
trunk/base/configure.ac
trunk/base/doc/macports.conf.in
trunk/base/doc/portfile.7
trunk/base/src/config.h.in
trunk/base/src/macports1.0/macports.tcl
trunk/base/src/port1.0/port_autoconf.tcl.in
trunk/base/src/port1.0/portmain.tcl
trunk/base/tests/test-macports.conf
Modified: trunk/base/aclocal.m4
===================================================================
--- trunk/base/aclocal.m4 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/aclocal.m4 2009-05-04 19:31:06 UTC (rev 50573)
@@ -572,111 +572,6 @@
AC_SUBST([MD5_LIBS])
])
-dnl This macro checks for X11 presence. If the libraries are
-dnl present, so must the headers be. If nothing is present,
-dnl print a warning
-
-# MP_CHECK_X11
-# ---------------------
-AC_DEFUN([MP_CHECK_X11], [
-
- # work around symbolic X11 link in /usr/include by providing explicit defaults
- case "$host" in
- *-*-darwin9*)
- if test "x$x_includes" = xNONE && test "x$x_libraries" = xNONE; then
- x_includes="/usr/X11/include"
- x_libraries="/usr/X11/lib"
- fi
- ;;
- *-*-darwin*)
- if test "x$x_includes" = xNONE && test "x$x_libraries" = xNONE; then
- x_includes="/usr/X11R6/include"
- x_libraries="/usr/X11R6/lib"
- fi
- ;;
- esac
-
- AC_PATH_X
- AC_PATH_XTRA
-
- # Check for libX11
- AC_CHECK_LIB([X11], [XOpenDisplay],[
- has_x_runtime=yes
- ], [ has_x_runtime=no ], [$X_LIBS])
-
-# echo "------done---------"
-# echo "x_includes=${x_includes}"
-# echo "x_libraries=${x_libraries}"
-# echo "no_x=${no_x}"
-# echo "X_CFLAGS=${X_CFLAGS}"
-# echo "X_LIBS=${X_LIBS}"
-# echo "X_DISPLAY_MISSING=${X_DISPLAY_MISSING}"
-# echo "has_x_runtime=${has_x_runtime}"
-# echo "host_os=${host_os}"
-# echo "------done---------"
-
- state=
-
- case "__${has_x_runtime}__${no_x}__" in
- "__no__yes__")
- # either the user said --without-x, or it was not found
- # at all (runtime or headers)
- AC_MSG_WARN([X11 not available. You will not be able to use ports that use X11])
- state=0
- ;;
- "__yes__yes__")
- state=1
- ;;
- "__yes____")
- state=2
- ;;
- *)
- state=3
- ;;
- esac
-
- case $host_os in
- darwin*)
- case $state in
- 1)
- cat <<EOF;
-Please install the X11 SDK packages from the
-Xcode Developer Tools CD
-EOF
- AC_MSG_ERROR([Broken X11 install. No X11 headers])
-
- ;;
- 3)
- cat <<EOF;
-Unknown configuration problem. Please install the X11 runtime
-and/or X11 SDK packages from the Xcode Developer Tools CD
-EOF
- AC_MSG_ERROR([Broken X11 install])
- ;;
- esac
- ;;
- *)
- case $state in
- 1)
- cat <<EOF;
-Please install the X11 developer headers for your platform
-EOF
- AC_MSG_ERROR([Broken X11 install. No X11 headers])
-
- ;;
- 3)
- cat <<EOF;
-Unknown configuration problem. Please install the X11
-implementation for your platform
-EOF
- AC_MSG_ERROR([Broken X11 install])
- ;;
- esac
- ;;
- esac
-
-])
-
# MP_PROG_XAR
#---------------------------------------
AC_DEFUN([MP_PROG_XAR],[
Modified: trunk/base/configure
===================================================================
--- trunk/base/configure 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/configure 2009-05-04 19:31:06 UTC (rev 50573)
@@ -673,12 +673,6 @@
TCL_BIN_DIR
TCL_VERSION
READLINE_LIBS
-x11prefix
-X_EXTRA_LIBS
-X_LIBS
-X_PRE_LIBS
-X_CFLAGS
-XMKMF
MD5_LIBS
READLINK_IS_NOT_P1003_1A
CPP
@@ -819,8 +813,6 @@
with_universal_target
with_universal_sysroot
with_universal_archs
-with_x11_prefix
-with_x
enable_readline
with_tcl
with_tclinclude
@@ -855,8 +847,7 @@
XAR
OPEN
OBJCPP
-CPP
-XMKMF'
+CPP'
ac_subdirs_all='src/thread2.6
src/sqlite-3.1.3'
@@ -1467,10 +1458,6 @@
cat <<\_ACEOF
-X features:
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
@@ -1520,9 +1507,6 @@
Universal SDK sysroot (with complete path)
--with-universal-archs="CPU"
Universal CPU architectures (space separated)
- --with-x11-prefix=PREFIX
- use PREFIX as the X11 base dir (default autodetect)
- --with-x use the X Window System
--with-tcl directory containing tcl configuration (tclConfig.sh)
--with-tclinclude directory containing the public Tcl header files.
--with-tclpackage Tcl package installation directory.
@@ -1558,7 +1542,6 @@
OPEN path to open command
OBJCPP Objective C preprocessor
CPP C preprocessor
- XMKMF Path to xmkmf, Makefile generator for X Window System
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
@@ -9402,23 +9385,6 @@
-
-# Check whether --with-x11-prefix was given.
-if test "${with_x11_prefix+set}" = set; then
- withval=$with_x11_prefix; x11prefix="$withval"
-fi
-
-case "$x11prefix" in
- "")
- # default to traditional value
- x11prefix=/usr/X11R6
- ;;
- *)
- x_includes=$x11prefix/include
- x_libraries=$x11prefix/lib
- ;;
-esac
-
# Check for md5 implementation
@@ -9925,1573 +9891,7 @@
fi
-# Check for X11 and paraphernalia
-
- # work around symbolic X11 link in /usr/include by providing explicit defaults
- case "$host" in
- *-*-darwin9*)
- if test "x$x_includes" = xNONE && test "x$x_libraries" = xNONE; then
- x_includes="/usr/X11/include"
- x_libraries="/usr/X11/lib"
- fi
- ;;
- *-*-darwin*)
- if test "x$x_includes" = xNONE && test "x$x_libraries" = xNONE; then
- x_includes="/usr/X11R6/include"
- x_libraries="/usr/X11R6/lib"
- fi
- ;;
- esac
-
- { $as_echo "$as_me:$LINENO: checking for X" >&5
-$as_echo_n "checking for X... " >&6; }
-
-
-# Check whether --with-x was given.
-if test "${with_x+set}" = set; then
- withval=$with_x;
-fi
-
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
-else
- case $x_includes,$x_libraries in #(
- *\'*) { { $as_echo "$as_me:$LINENO: error: cannot use X directory names containing '" >&5
-$as_echo "$as_me: error: cannot use X directory names containing '" >&2;}
- { (exit 1); exit 1; }; };; #(
- *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- # One or both of the vars are not set, and there is no cached value.
-ac_x_includes=no ac_x_libraries=no
-rm -f -r conftest.dir
-if mkdir conftest.dir; then
- cd conftest.dir
- cat >Imakefile <<'_ACEOF'
-incroot:
- @echo incroot='${INCROOT}'
-usrlibdir:
- @echo usrlibdir='${USRLIBDIR}'
-libdir:
- @echo libdir='${LIBDIR}'
-_ACEOF
- if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- for ac_var in incroot usrlibdir libdir; do
- eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
- done
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl dylib la dll; do
- if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" &&
- test -f "$ac_im_libdir/libX11.$ac_extension"; then
- ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case $ac_im_incroot in
- /usr/include) ac_x_includes= ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
- esac
- case $ac_im_usrlibdir in
- /usr/lib | /usr/lib64 | /lib | /lib64) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
- esac
- fi
- cd ..
- rm -f -r conftest.dir
-fi
-
-# Standard set of common directories for X headers.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-ac_x_header_dirs='
-/usr/X11/include
-/usr/X11R6/include
-/usr/X11R5/include
-/usr/X11R4/include
-
-/usr/include/X11
-/usr/include/X11R6
-/usr/include/X11R5
-/usr/include/X11R4
-
-/usr/local/X11/include
-/usr/local/X11R6/include
-/usr/local/X11R5/include
-/usr/local/X11R4/include
-
-/usr/local/include/X11
-/usr/local/include/X11R6
-/usr/local/include/X11R5
-/usr/local/include/X11R4
-
-/usr/X386/include
-/usr/x386/include
-/usr/XFree86/include/X11
-
-/usr/include
-/usr/local/include
-/usr/unsupported/include
-/usr/athena/include
-/usr/local/x11r5/include
-/usr/lpp/Xamples/include
-
-/usr/openwin/include
-/usr/openwin/share/include'
-
-if test "$ac_x_includes" = no; then
- # Guess where to find include files, by looking for Xlib.h.
- # First, try using that file with no special directory specified.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <X11/Xlib.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # We can compile using X headers with no special include directory.
-ac_x_includes=
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- for ac_dir in $ac_x_header_dirs; do
- if test -r "$ac_dir/X11/Xlib.h"; then
- ac_x_includes=$ac_dir
- break
- fi
-done
-fi
-
-rm -f conftest.err conftest.$ac_ext
-fi # $ac_x_includes = no
-
-if test "$ac_x_libraries" = no; then
- # Check for the libraries.
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS=$LIBS
- LIBS="-lX11 $LIBS"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <X11/Xlib.h>
-int
-main ()
-{
-XrmInitialize ()
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- LIBS=$ac_save_LIBS
-# We can link X programs with no special library path.
-ac_x_libraries=
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- LIBS=$ac_save_LIBS
-for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
-do
- # Don't even attempt the hair of trying to link an X program!
- for ac_extension in a so sl dylib la dll; do
- if test -r "$ac_dir/libX11.$ac_extension"; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
-done
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi # $ac_x_libraries = no
-
-case $ac_x_includes,$ac_x_libraries in #(
- no,* | *,no | *\'*)
- # Didn't find X, or a directory has "'" in its name.
- ac_cv_have_x="have_x=no";; #(
- *)
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes\
- ac_x_includes='$ac_x_includes'\
- ac_x_libraries='$ac_x_libraries'"
-esac
-fi
-;; #(
- *) have_x=yes;;
- esac
- eval "$ac_cv_have_x"
-fi # $with_x != no
-
-if test "$have_x" != yes; then
- { $as_echo "$as_me:$LINENO: result: $have_x" >&5
-$as_echo "$have_x" >&6; }
- no_x=yes
-else
- # If each of the values was on the command line, it overrides each guess.
- test "x$x_includes" = xNONE && x_includes=$ac_x_includes
- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes\
- ac_x_includes='$x_includes'\
- ac_x_libraries='$x_libraries'"
- { $as_echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
-$as_echo "libraries $x_libraries, headers $x_includes" >&6; }
-fi
-
- if test "$no_x" = yes; then
- # Not all programs may use this symbol, but it does not hurt to define it.
-
-cat >>confdefs.h <<\_ACEOF
-#define X_DISPLAY_MISSING 1
-_ACEOF
-
- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
-else
- if test -n "$x_includes"; then
- X_CFLAGS="$X_CFLAGS -I$x_includes"
- fi
-
- # It would also be nice to do this for all -L options, not just this one.
- if test -n "$x_libraries"; then
- X_LIBS="$X_LIBS -L$x_libraries"
- # For Solaris; some versions of Sun CC require a space after -R and
- # others require no space. Words are not sufficient . . . .
- { $as_echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5
-$as_echo_n "checking whether -R must be followed by a space... " >&6; }
- ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
- ac_xsave_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
- X_LIBS="$X_LIBS -R$x_libraries"
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
- X_LIBS="$X_LIBS -R $x_libraries"
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { $as_echo "$as_me:$LINENO: result: neither works" >&5
-$as_echo "neither works" >&6; }
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- ac_c_werror_flag=$ac_xsave_c_werror_flag
- LIBS=$ac_xsave_LIBS
- fi
-
- # Check for system-dependent libraries X programs must link with.
- # Do this before checking for the system-independent R6 libraries
- # (-lICE), since we may need -lsocket or whatever for X linking.
-
- if test "$ISC" = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
- else
- # Martyn Johnson says this is needed for Ultrix, if the X
- # libraries were built with DECnet support. And Karl Berry says
- # the Alpha needs dnet_stub (dnet does not exist).
- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char XOpenDisplay ();
-int
-main ()
-{
-return XOpenDisplay ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5
-$as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; }
-if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldnet $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dnet_ntoa ();
-int
-main ()
-{
-return dnet_ntoa ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_dnet_dnet_ntoa=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dnet_dnet_ntoa=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
-$as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; }
-if test "x$ac_cv_lib_dnet_dnet_ntoa" = x""yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
-fi
-
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5
-$as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; }
-if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldnet_stub $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dnet_ntoa ();
-int
-main ()
-{
-return dnet_ntoa ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_dnet_stub_dnet_ntoa=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dnet_stub_dnet_ntoa=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
-$as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; }
-if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = x""yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
-fi
-
- fi
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$ac_xsave_LIBS"
-
- # msh at cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
- # to get the SysV transport functions.
- # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4)
- # needs -lnsl.
- # The nsl library prevents programs from opening the X display
- # on Irix 5.2, according to T.E. Dickey.
- # The functions gethostbyname, getservbyname, and inet_addr are
- # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking.
- { $as_echo "$as_me:$LINENO: checking for gethostbyname" >&5
-$as_echo_n "checking for gethostbyname... " >&6; }
-if test "${ac_cv_func_gethostbyname+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define gethostbyname to an innocuous variant, in case <limits.h> declares gethostbyname.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define gethostbyname innocuous_gethostbyname
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char gethostbyname (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef gethostbyname
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_gethostbyname || defined __stub___gethostbyname
-choke me
-#endif
-
-int
-main ()
-{
-return gethostbyname ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_func_gethostbyname=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_gethostbyname=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
-$as_echo "$ac_cv_func_gethostbyname" >&6; }
-
- if test $ac_cv_func_gethostbyname = no; then
- { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
-$as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
-if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lnsl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-int
-main ()
-{
-return gethostbyname ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_nsl_gethostbyname=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_nsl_gethostbyname=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
-$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
-if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
-fi
-
- if test $ac_cv_lib_nsl_gethostbyname = no; then
- { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5
-$as_echo_n "checking for gethostbyname in -lbsd... " >&6; }
-if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lbsd $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-int
-main ()
-{
-return gethostbyname ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_bsd_gethostbyname=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_bsd_gethostbyname=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5
-$as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; }
-if test "x$ac_cv_lib_bsd_gethostbyname" = x""yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
-fi
-
- fi
- fi
-
- # lieder at skyler.mavd.honeywell.com says without -lsocket,
- # socket/setsockopt and other routines are undefined under SCO ODT
- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
- # on later versions), says Simon Leinen: it contains gethostby*
- # variants that don't use the name server (or something). -lsocket
- # must be given before -lnsl if both are needed. We assume that
- # if connect needs -lnsl, so does gethostbyname.
- { $as_echo "$as_me:$LINENO: checking for connect" >&5
-$as_echo_n "checking for connect... " >&6; }
-if test "${ac_cv_func_connect+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define connect to an innocuous variant, in case <limits.h> declares connect.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define connect innocuous_connect
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char connect (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef connect
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char connect ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_connect || defined __stub___connect
-choke me
-#endif
-
-int
-main ()
-{
-return connect ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_func_connect=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_connect=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5
-$as_echo "$ac_cv_func_connect" >&6; }
-
- if test $ac_cv_func_connect = no; then
- { $as_echo "$as_me:$LINENO: checking for connect in -lsocket" >&5
-$as_echo_n "checking for connect in -lsocket... " >&6; }
-if test "${ac_cv_lib_socket_connect+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char connect ();
-int
-main ()
-{
-return connect ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_socket_connect=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_socket_connect=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5
-$as_echo "$ac_cv_lib_socket_connect" >&6; }
-if test "x$ac_cv_lib_socket_connect" = x""yes; then
- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
-fi
-
- fi
-
- # Guillermo Gomez says -lposix is necessary on A/UX.
- { $as_echo "$as_me:$LINENO: checking for remove" >&5
-$as_echo_n "checking for remove... " >&6; }
-if test "${ac_cv_func_remove+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define remove to an innocuous variant, in case <limits.h> declares remove.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define remove innocuous_remove
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char remove (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef remove
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char remove ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_remove || defined __stub___remove
-choke me
-#endif
-
-int
-main ()
-{
-return remove ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_func_remove=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_remove=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5
-$as_echo "$ac_cv_func_remove" >&6; }
-
- if test $ac_cv_func_remove = no; then
- { $as_echo "$as_me:$LINENO: checking for remove in -lposix" >&5
-$as_echo_n "checking for remove in -lposix... " >&6; }
-if test "${ac_cv_lib_posix_remove+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lposix $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char remove ();
-int
-main ()
-{
-return remove ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_posix_remove=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_posix_remove=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5
-$as_echo "$ac_cv_lib_posix_remove" >&6; }
-if test "x$ac_cv_lib_posix_remove" = x""yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
-fi
-
- fi
-
- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- { $as_echo "$as_me:$LINENO: checking for shmat" >&5
-$as_echo_n "checking for shmat... " >&6; }
-if test "${ac_cv_func_shmat+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define shmat to an innocuous variant, in case <limits.h> declares shmat.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define shmat innocuous_shmat
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shmat (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shmat
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shmat ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_shmat || defined __stub___shmat
-choke me
-#endif
-
-int
-main ()
-{
-return shmat ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_func_shmat=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_shmat=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5
-$as_echo "$ac_cv_func_shmat" >&6; }
-
- if test $ac_cv_func_shmat = no; then
- { $as_echo "$as_me:$LINENO: checking for shmat in -lipc" >&5
-$as_echo_n "checking for shmat in -lipc... " >&6; }
-if test "${ac_cv_lib_ipc_shmat+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lipc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shmat ();
-int
-main ()
-{
-return shmat ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_ipc_shmat=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_ipc_shmat=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5
-$as_echo "$ac_cv_lib_ipc_shmat" >&6; }
-if test "x$ac_cv_lib_ipc_shmat" = x""yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
-fi
-
- fi
- fi
-
- # Check for libraries that X11R6 Xt/Xaw programs need.
- ac_save_LDFLAGS=$LDFLAGS
- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
- # check for ICE first), but we must link in the order -lSM -lICE or
- # we get undefined symbols. So assume we have SM if we have ICE.
- # These have to be linked with before -lX11, unlike the other
- # libraries we check for below, so use a different variable.
- # John Interrante, Karl Berry
- { $as_echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5
-$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; }
-if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lICE $X_EXTRA_LIBS $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char IceConnectionNumber ();
-int
-main ()
-{
-return IceConnectionNumber ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_ICE_IceConnectionNumber=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_ICE_IceConnectionNumber=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
-$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; }
-if test "x$ac_cv_lib_ICE_IceConnectionNumber" = x""yes; then
- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
-fi
-
- LDFLAGS=$ac_save_LDFLAGS
-
-fi
-
-
- # Check for libX11
- { $as_echo "$as_me:$LINENO: checking for XOpenDisplay in -lX11" >&5
-$as_echo_n "checking for XOpenDisplay in -lX11... " >&6; }
-if test "${ac_cv_lib_X11_XOpenDisplay+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lX11 $X_LIBS $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char XOpenDisplay ();
-int
-main ()
-{
-return XOpenDisplay ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_X11_XOpenDisplay=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_X11_XOpenDisplay=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XOpenDisplay" >&5
-$as_echo "$ac_cv_lib_X11_XOpenDisplay" >&6; }
-if test "x$ac_cv_lib_X11_XOpenDisplay" = x""yes; then
-
- has_x_runtime=yes
-
-else
- has_x_runtime=no
-fi
-
-
-# echo "------done---------"
-# echo "x_includes=${x_includes}"
-# echo "x_libraries=${x_libraries}"
-# echo "no_x=${no_x}"
-# echo "X_CFLAGS=${X_CFLAGS}"
-# echo "X_LIBS=${X_LIBS}"
-# echo "X_DISPLAY_MISSING=${X_DISPLAY_MISSING}"
-# echo "has_x_runtime=${has_x_runtime}"
-# echo "host_os=${host_os}"
-# echo "------done---------"
-
- state=
-
- case "__${has_x_runtime}__${no_x}__" in
- "__no__yes__")
- # either the user said --without-x, or it was not found
- # at all (runtime or headers)
- { $as_echo "$as_me:$LINENO: WARNING: X11 not available. You will not be able to use ports that use X11" >&5
-$as_echo "$as_me: WARNING: X11 not available. You will not be able to use ports that use X11" >&2;}
- state=0
- ;;
- "__yes__yes__")
- state=1
- ;;
- "__yes____")
- state=2
- ;;
- *)
- state=3
- ;;
- esac
-
- case $host_os in
- darwin*)
- case $state in
- 1)
- cat <<EOF;
-Please install the X11 SDK packages from the
-Xcode Developer Tools CD
-EOF
- { { $as_echo "$as_me:$LINENO: error: Broken X11 install. No X11 headers" >&5
-$as_echo "$as_me: error: Broken X11 install. No X11 headers" >&2;}
- { (exit 1); exit 1; }; }
-
- ;;
- 3)
- cat <<EOF;
-Unknown configuration problem. Please install the X11 runtime
-and/or X11 SDK packages from the Xcode Developer Tools CD
-EOF
- { { $as_echo "$as_me:$LINENO: error: Broken X11 install" >&5
-$as_echo "$as_me: error: Broken X11 install" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
- ;;
- *)
- case $state in
- 1)
- cat <<EOF;
-Please install the X11 developer headers for your platform
-EOF
- { { $as_echo "$as_me:$LINENO: error: Broken X11 install. No X11 headers" >&5
-$as_echo "$as_me: error: Broken X11 install. No X11 headers" >&2;}
- { (exit 1); exit 1; }; }
-
- ;;
- 3)
- cat <<EOF;
-Unknown configuration problem. Please install the X11
-implementation for your platform
-EOF
- { { $as_echo "$as_me:$LINENO: error: Broken X11 install" >&5
-$as_echo "$as_me: error: Broken X11 install" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
- ;;
- esac
-
-
-
-{ $as_echo "$as_me:$LINENO: checking for X11 prefix" >&5
-$as_echo_n "checking for X11 prefix... " >&6; }
-X_INCLUDES_PREFIX=`echo "$x_includes" | sed "s,/include,,"`
-X_LIBRARIES_PREFIX=`echo "$x_libraries" | sed "s,/lib,,"`
-if test "x$have_x" = "xyes" -a "x$X_INCLUDES_PREFIX" = "x$X_LIBRARIES_PREFIX" -a "x$X_LIBRARIES_PREFIX" != x; then
- x11prefix=$X_LIBRARIES_PREFIX
-fi
-{ $as_echo "$as_me:$LINENO: result: $x11prefix" >&5
-$as_echo "$x11prefix" >&6; }
-
-
# Check for readline
# Check whether --enable-readline was given.
if test "${enable_readline+set}" = set; then
Modified: trunk/base/configure.ac
===================================================================
--- trunk/base/configure.ac 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/configure.ac 2009-05-04 19:31:06 UTC (rev 50573)
@@ -173,32 +173,9 @@
AC_CHECK_FUNCS([bzero memset dup2 regcomp strdup strerror strtol fgetln lockf flock setmode strcasecmp strncasecmp strlcpy copyfile clearenv])
MP_CHECK_READLINK_IS_P1003_1A
-AC_ARG_WITH(x11-prefix, [AC_HELP_STRING([--with-x11-prefix=PREFIX], [use PREFIX as the X11 base dir (default autodetect)])], [ x11prefix="$withval" ] )
-case "$x11prefix" in
- "")
- # default to traditional value
- x11prefix=/usr/X11R6
- ;;
- *)
- x_includes=$x11prefix/include
- x_libraries=$x11prefix/lib
- ;;
-esac
-
# Check for md5 implementation
MP_LIB_MD5
-# Check for X11 and paraphernalia
-MP_CHECK_X11
-AC_MSG_CHECKING(for X11 prefix)
-X_INCLUDES_PREFIX=`echo "$x_includes" | sed "s,/include,,"`
-X_LIBRARIES_PREFIX=`echo "$x_libraries" | sed "s,/lib,,"`
-if test "x$have_x" = "xyes" -a "x$X_INCLUDES_PREFIX" = "x$X_LIBRARIES_PREFIX" -a "x$X_LIBRARIES_PREFIX" != x; then
- x11prefix=$X_LIBRARIES_PREFIX
-fi
-AC_MSG_RESULT([$x11prefix])
-AC_SUBST(x11prefix)
-
# Check for readline
AC_ARG_ENABLE(readline, AC_HELP_STRING([--enable-readline], [Enable addition of readline support, if readline present.]),
[
Modified: trunk/base/doc/macports.conf.in
===================================================================
--- trunk/base/doc/macports.conf.in 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/doc/macports.conf.in 2009-05-04 19:31:06 UTC (rev 50573)
@@ -19,11 +19,8 @@
# PATH settings that are used for external tools (configure, make, etc.) while installing ports. The default
# paths are given in the example; it need not be uncommented. Customizing binpath is intended for advanced users only.
-#binpath @prefix_expanded@/bin:@prefix_expanded@/sbin:/bin:/sbin:/usr/bin:/usr/sbin:@x11prefix@/bin
+#binpath @prefix_expanded@/bin:@prefix_expanded@/sbin:/bin:/sbin:/usr/bin:/usr/sbin
-# Directory containing the X11 installation.
-x11prefix @x11prefix@
-
# Directory containing Applications from ports.
applications_dir @MPAPPLICATIONSDIR@
Modified: trunk/base/doc/portfile.7
===================================================================
--- trunk/base/doc/portfile.7 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/doc/portfile.7 2009-05-04 19:31:06 UTC (rev 50573)
@@ -479,12 +479,6 @@
.br
.Sy Default:
.Em ${prefix}/Library/Frameworks
-.It Ic x11prefix
-Absolute path to X11 (eg
-.Pa /usr/X11R6 )
-.br
-.Sy Type:
-.Em read-only
.El
.Sh DEPENDENCY OPTIONS
Port dependencies should refer to other MacPort ports
Modified: trunk/base/src/config.h.in
===================================================================
--- trunk/base/src/config.h.in 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/src/config.h.in 2009-05-04 19:31:06 UTC (rev 50573)
@@ -286,9 +286,6 @@
/* Attribute to mark unused variables */
#undef UNUSED
-/* Define to 1 if the X Window System is missing or not being used. */
-#undef X_DISPLAY_MISSING
-
/* Define to `int' if <sys/types.h> does not define. */
#undef pid_t
Modified: trunk/base/src/macports1.0/macports.tcl
===================================================================
--- trunk/base/src/macports1.0/macports.tcl 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/src/macports1.0/macports.tcl 2009-05-04 19:31:06 UTC (rev 50573)
@@ -40,7 +40,7 @@
namespace eval macports {
namespace export bootstrap_options user_options portinterp_options open_mports ui_priorities
variable bootstrap_options "\
- portdbpath libpath binpath auto_path extra_env sources_conf prefix x11prefix portdbformat \
+ portdbpath libpath binpath auto_path extra_env sources_conf prefix portdbformat \
portinstalltype portarchivemode portarchivepath portarchivetype portautoclean \
porttrace portverbose destroot_umask variants_conf rsync_server rsync_options \
rsync_dir startupitem_type place_worksymlink xcodeversion xcodebuildcmd \
@@ -49,7 +49,7 @@
macportsuser proxy_override_env proxy_http proxy_https proxy_ftp proxy_rsync proxy_skip"
variable user_options "submitter_name submitter_email submitter_key"
variable portinterp_options "\
- portdbpath porturl portpath portbuildpath auto_path prefix prefix_frozen x11prefix portsharepath \
+ portdbpath porturl portpath portbuildpath auto_path prefix prefix_frozen portsharepath \
registry.path registry.format registry.installtype portarchivemode portarchivepath \
portarchivetype portautoclean porttrace portverbose destroot_umask rsync_server \
rsync_options rsync_dir startupitem_type place_worksymlink \
@@ -338,7 +338,6 @@
global macports::prefix
global macports::macportsuser
global macports::prefix_frozen
- global macports::x11prefix
global macports::registry.installtype
global macports::rsync_dir
global macports::rsync_options
@@ -604,7 +603,7 @@
}
if {![info exists binpath]} {
- set env(PATH) "${prefix}/bin:${prefix}/sbin:/bin:/sbin:/usr/bin:/usr/sbin:${x11prefix}/bin"
+ set env(PATH) "${prefix}/bin:${prefix}/sbin:/bin:/sbin:/usr/bin:/usr/sbin"
} else {
set env(PATH) "$binpath"
}
@@ -1191,7 +1190,6 @@
set depline [lindex [split $depspec :] 1]
set prefix [_mportkey $mport prefix]
set frameworks_dir [_mportkey $mport frameworks_dir]
- set x11prefix [_mportkey $mport x11prefix]
if {[info exists env(DYLD_FRAMEWORK_PATH)]} {
lappend search_path $env(DYLD_FRAMEWORK_PATH)
@@ -1204,7 +1202,7 @@
if {[info exists env(DYLD_LIBRARY_PATH)]} {
lappend search_path $env(DYLD_LIBRARY_PATH)
}
- lappend search_path /lib /usr/lib ${x11prefix}/lib ${prefix}/lib
+ lappend search_path /lib /usr/lib ${prefix}/lib
if {[info exists env(DYLD_FALLBACK_LIBRARY_PATH)]} {
lappend search_path $env(DYLD_FALLBACK_LIBRARY_PATH)
}
Modified: trunk/base/src/port1.0/port_autoconf.tcl.in
===================================================================
--- trunk/base/src/port1.0/port_autoconf.tcl.in 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/src/port1.0/port_autoconf.tcl.in 2009-05-04 19:31:06 UTC (rev 50573)
@@ -47,5 +47,4 @@
variable install_group "@DSTGRP@"
variable prefix "@prefix_expanded@"
variable macportsuser "@RUNUSR@"
- variable x11prefix "@x11prefix@"
}
Modified: trunk/base/src/port1.0/portmain.tcl
===================================================================
--- trunk/base/src/port1.0/portmain.tcl 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/src/port1.0/portmain.tcl 2009-05-04 19:31:06 UTC (rev 50573)
@@ -59,7 +59,6 @@
default workpath {[getportworkpath_from_buildpath $portbuildpath]}
default worksymlink {[file join $portpath work]}
default prefix /opt/local
-default x11prefix /usr/X11R6
default applications_dir /Applications/MacPorts
default frameworks_dir {${prefix}/Library/Frameworks}
default destdir destroot
Modified: trunk/base/tests/test-macports.conf
===================================================================
--- trunk/base/tests/test-macports.conf 2009-05-04 19:19:09 UTC (rev 50572)
+++ trunk/base/tests/test-macports.conf 2009-05-04 19:31:06 UTC (rev 50573)
@@ -14,9 +14,6 @@
# Type of installation to do for ports, "direct" or "image". See macports.conf(5) and online documentation.
portinstalltype image
-# Directory containing the X11 installation.
-x11prefix /tmp/macports-tests/usr/X11R6
-
# Where to find the sources list.
sources_conf /tmp/macports-tests/opt/local/etc/macports/sources.conf
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20090504/c2b64a8b/attachment-0001.html>
More information about the macports-changes
mailing list