[58878] users/dweber/textproc/doxygen

dweber at macports.org dweber at macports.org
Tue Oct 6 12:59:57 PDT 2009


Revision: 58878
          http://trac.macports.org/changeset/58878
Author:   dweber at macports.org
Date:     2009-10-06 12:59:56 -0700 (Tue, 06 Oct 2009)
Log Message:
-----------
Need the files too

Modified Paths:
--------------
    users/dweber/textproc/doxygen/Portfile

Added Paths:
-----------
    users/dweber/textproc/doxygen/files/

Modified: users/dweber/textproc/doxygen/Portfile
===================================================================
--- users/dweber/textproc/doxygen/Portfile	2009-10-06 19:53:53 UTC (rev 58877)
+++ users/dweber/textproc/doxygen/Portfile	2009-10-06 19:59:56 UTC (rev 58878)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
 # $Id$
 
 PortSystem 1.0
@@ -2,103 +3,105 @@
 
-name			doxygen
-version			1.6.1
-categories		textproc devel
-maintainers		css
-description		Documentation system for several programming languages
+name            doxygen
+version         1.6.1
+categories      textproc devel
+maintainers     css
+description     Documentation system for several programming languages
 long_description \
-	It can generate an on-line documentation browser (in HTML) and/or an \
-	off-line reference manual from a set of documented source files. \
-	There is also support for generating output in RTF (MS-Word), \
-	PostScript, hyperlinked PDF, compressed HTML, and Unix man pages. The \
-	documentation is extracted directly from the sources, which makes it \
-	much easier to keep the documentation consistent with the source code. \
-	You can configure doxygen to extract the code structure from \
-	undocumented source files. This is very useful to quickly find your \
-	way in large source distributions. You can also visualize the \
-	relations between the various elements by means of include dependency \
-	graphs, inheritance diagrams, and collaboration diagrams, which are \
-	all generated automatically.
+    It can generate an on-line documentation browser (in HTML) and/or an \
+    off-line reference manual from a set of documented source files. \
+    There is also support for generating output in RTF (MS-Word), \
+    PostScript, hyperlinked PDF, compressed HTML, and Unix man pages. The \
+    documentation is extracted directly from the sources, which makes it \
+    much easier to keep the documentation consistent with the source code. \
+    You can configure doxygen to extract the code structure from \
+    undocumented source files. This is very useful to quickly find your \
+    way in large source distributions. You can also visualize the \
+    relations between the various elements by means of include dependency \
+    graphs, inheritance diagrams, and collaboration diagrams, which are \
+    all generated automatically.
 
-platforms		darwin
+platforms       darwin
 
-homepage		http://www.doxygen.org/
-master_sites		ftp://ftp.stack.nl/pub/users/dimitri/
-distfiles		${distname}.src${extract.suffix}
+homepage        http://www.doxygen.org/
+master_sites    ftp://ftp.stack.nl/pub/users/dimitri/
+distfiles       ${distname}.src${extract.suffix}
 
-checksums		md5 2ec343643e134f0d3ce2069420bcb4f0 \
-			sha1 31f861841eba1ebdded1b4bf70bdecb42441dafd \
-			rmd160 0a9c5962dbd076bac418b85b72a4874576c9da4d
+checksums   md5 2ec343643e134f0d3ce2069420bcb4f0 \
+            sha1 31f861841eba1ebdded1b4bf70bdecb42441dafd \
+            rmd160 0a9c5962dbd076bac418b85b72a4874576c9da4d
 
-depends_build-append	bin:perl:perl5 bin:flex:flex bin:bison:bison bin:ginstall:coreutils
-depends_lib		port:libpng path:bin/dot:graphviz port:libiconv
+depends_build-append    bin:perl:perl5 \
+                        bin:flex:flex \
+                        bin:bison:bison \
+                        bin:ginstall:coreutils
+depends_lib             port:libpng \
+                        path:bin/dot:graphviz \
+                        port:libiconv
 
 universal_variant no
 
-configure.pre_args	--prefix ${prefix}
-configure.args		--docdir ${prefix}/share/doc --dot ${prefix}/bin/dot
+configure.pre_args  --prefix ${prefix}
+configure.args      --docdir ${prefix}/share/doc \
+                    --dot    ${prefix}/bin/dot
 
-post-patch {
-	# ensure correct compilers and compiler options are used
-	reinplace "/^TMAKE_CC\[\[:space:\]\]/s%=.*%= ${configure.cc} ${configure.cppflags}%" ${tmake_conf}
-	reinplace "/^TMAKE_CXX\[\[:space:\]\]/s%=.*%= ${configure.cxx} ${configure.cppflags}%" ${tmake_conf}
-	reinplace "/^TMAKE_LINK\[\[:space:\]\]/s%=.*%= ${configure.cxx} ${configure.ldflags}%" ${tmake_conf}
-	reinplace "/^TMAKE_LINK_SHLIB\[\[:space:\]\]/s%=.*%= ${configure.cxx}%" ${tmake_conf}
+#post-patch {
+#   # ensure correct compilers and compiler options are used
+#   reinplace "/^TMAKE_CC\[\[:space:\]\]/s%=.*%= ${configure.cc} ${configure.cppflags}%" ${tmake_conf}
+#   reinplace "/^TMAKE_CXX\[\[:space:\]\]/s%=.*%= ${configure.cxx} ${configure.cppflags}%" ${tmake_conf}
+#   reinplace "/^TMAKE_LINK\[\[:space:\]\]/s%=.*%= ${configure.cxx} ${configure.ldflags}%" ${tmake_conf}
+#   reinplace "/^TMAKE_LINK_SHLIB\[\[:space:\]\]/s%=.*%= ${configure.cxx}%" ${tmake_conf}
+#
+#   # may not be strictly necessary, but remove trailing '/' from DESTDIR
+#   reinplace "s|\$(DESTDIR)/|\$(DESTDIR)|g" ${worksrcpath}/Makefile.in
+#}
 
-	# may not be strictly necessary, but remove trailing '/' from DESTDIR
-	reinplace "s|\$(DESTDIR)/|\$(DESTDIR)|g" ${worksrcpath}/Makefile.in
-}
+build.target        all
 
-build.target		all
+destroot.target     install
+destroot.args       INSTALL=${prefix} \
+                    DOCDIR=${prefix}/share/doc/doxygen \
+                    MAN1DIR=share/man/man1
 
-destroot.target		install
-destroot.args		INSTALL=${prefix} \
-			DOCDIR=${prefix}/share/doc/doxygen \
-			MAN1DIR=share/man/man1
-
 variant docs description {Include the doxygen PDF documentation and LaTeX} {
-	build.target-append	pdf
-	destroot.target-append	install_docs
-	depends_build-append	bin:pdflatex:texlive \
-				bin:gs:ghostscript
+    build.target-append     pdf
+    destroot.target-append  install_docs
+    depends_build-append    bin:pdflatex:texlive \
+                            bin:gs:ghostscript
 }
 
 variant wizard description {Include the GUI wizard based on Qt} {
-	configure.env-append	QTDIR=${prefix}/libexec/qt4-mac
-	build.env-append	QTDIR=${prefix}/libexec/qt4-mac
-	depends_lib-append	port:qt4-mac
-	configure.args-append	--with-doxywizard
-
-	# on Macs, qmake builds .app directories
-	patchfiles-append	patch-Makfile.in.diff
-
-	post-patch {
-		# give doxywizard the more mac-like name of DoxyWizard
-		reinplace "/^TARGET\[\[:space:\]\]/s%=.*%= DoxyWizard%" ${worksrcpath}/addon/doxywizard/doxywizard.pro.in
-
-		reinplace "s|__APPLICATIONS_DIR__|${applications_dir}|" ${worksrcpath}/addon/doxywizard/Makefile.in
-		reinplace "s|\$(INSTALL)|\$(DESTDIR)\$(INSTALL)|g" ${worksrcpath}/addon/doxywizard/Makefile.in
-	}
-
-	post-destroot {
-		# allow doxywizard to be called from the command line
-		ln -s ${applications_dir}/DoxyWizard.app/Contents/MacOS/DoxyWizard ${destroot}${prefix}/bin/doxywizard
-	}
+    configure.env-append    QTDIR=${prefix}/libexec/qt4-mac
+    build.env-append        QTDIR=${prefix}/libexec/qt4-mac
+    depends_lib-append      port:qt4-mac
+    configure.args-append   --with-doxywizard
+    # on Macs, qmake builds .app directories
+    patchfiles-append   patch-Makfile.in.diff
+    post-patch {
+        # give doxywizard the more mac-like name of DoxyWizard
+        reinplace "/^TARGET\[\[:space:\]\]/s%=.*%= DoxyWizard%" ${worksrcpath}/addon/doxywizard/doxywizard.pro.in
+        reinplace "s|__APPLICATIONS_DIR__|${applications_dir}|" ${worksrcpath}/addon/doxywizard/Makefile.in
+        reinplace "s|\$(INSTALL)|\$(DESTDIR)\$(INSTALL)|g" ${worksrcpath}/addon/doxywizard/Makefile.in
+    }
+    post-destroot {
+        # allow doxywizard to be called from the command line
+        ln -s ${applications_dir}/DoxyWizard.app/Contents/MacOS/DoxyWizard ${destroot}${prefix}/bin/doxywizard
+    }
 }
 
 platform darwin {
-	# Specify the platform explicitly to avoid a universal build.
-	global tmake_conf
-
-	if { ![variant_isset universal] } {
-		set tmake_conf	${worksrcpath}/tmake/lib/macosx-c++/tmake.conf
-		configure.args-append	--platform macosx-c++
-	} else {
-		set tmake_conf	${worksrcpath}/tmake/lib/macosx-uni-c++/tmake.conf
-		configure.args-append	--platform macosx-uni-c++
-	}
+    # Specify the platform explicitly to avoid a universal build.
+    global tmake_conf
+    if { ![variant_isset universal] } {
+        set tmake_conf  ${worksrcpath}/tmake/lib/macosx-c++/tmake.conf
+        configure.args-append   --platform macosx-c++
+    } else {
+        set tmake_conf  ${worksrcpath}/tmake/lib/macosx-uni-c++/tmake.conf
+        configure.args-append   --platform macosx-uni-c++
+    }
 }
 
 platform darwin 10 {
-	# Disable invalid "Unsupported OS" error on Snow Leopard
-	patchfiles-append patch-qtools_qglobal.h.diff
+    # Disable invalid "Unsupported OS" error on Snow Leopard
+    patchfiles-append patch-qtools_qglobal.h.diff
 }
+
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20091006/7034b8ca/attachment.html>


More information about the macports-changes mailing list