[68774] trunk/dports/cross
jmr at macports.org
jmr at macports.org
Sun Jun 13 04:58:18 PDT 2010
Revision: 68774
http://trac.macports.org/changeset/68774
Author: jmr at macports.org
Date: 2010-06-13 04:58:13 -0700 (Sun, 13 Jun 2010)
Log Message:
-----------
New port: upslug2, NSLU2 firmware upload tool (#24900)
Added Paths:
-----------
trunk/dports/cross/upslug2/
trunk/dports/cross/upslug2/Portfile
trunk/dports/cross/upslug2/files/
trunk/dports/cross/upslug2/files/11-r41.diff
trunk/dports/cross/upslug2/files/patch-nslu2_protocol.h.diff
Added: trunk/dports/cross/upslug2/Portfile
===================================================================
--- trunk/dports/cross/upslug2/Portfile (rev 0)
+++ trunk/dports/cross/upslug2/Portfile 2010-06-13 11:58:13 UTC (rev 68774)
@@ -0,0 +1,41 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
+# $Id$
+
+PortSystem 1.0
+
+name upslug2
+version 12-r41
+categories cross devel
+license MIT
+maintainers gmail.com:ranauei
+description A tool to flash your NSLU2 from a computer on the same network
+long_description UpSlug2 is a completely rewritten version of the UpSlug tool \
+ which is more robust and flexible, though it still requires \
+ an ethernet connection to the NSLU2.
+homepage http://www.nslu2-linux.org/wiki/Main/UpSlug2
+platforms darwin
+master_sites sourceforge:nslu
+distname ${name}-11
+checksums md5 e135bc8a390b65573bbc8ff4628e490c \
+ sha1 cddfd7c4bc75fc59c5f8cf8c276741bfe3a87e7f \
+ rmd160 4c79044eaa81e00bde722dc1ec091a7103ca5ef1
+
+depends_lib port:libpcap
+
+# patch latest released version 11 to version 12 (svn revision 41)
+patchfiles 11-r41.diff
+
+use_autoreconf yes
+
+configure.args --with-libpcap
+
+variant flashmod16 description {Add support for modded NSLU2 with 16MByte of flash memory} {
+ patchfiles-append patch-nslu2_protocol.h.diff
+}
+
+post-destroot {
+ xinstall -m 644 ${worksrcpath}/${name}.8 ${destroot}${prefix}/share/man/man8
+ xinstall -m 755 -d ${destroot}${prefix}/share/doc/${name}
+ xinstall -m 644 -W ${worksrcpath} AUTHORS COPYING ChangeLog README \
+ README.macosx ${destroot}${prefix}/share/doc/${name}
+}
Property changes on: trunk/dports/cross/upslug2/Portfile
___________________________________________________________________
Added: svn:keywords
+ Id
Added: svn:eol-style
+ native
Added: trunk/dports/cross/upslug2/files/11-r41.diff
===================================================================
--- trunk/dports/cross/upslug2/files/11-r41.diff (rev 0)
+++ trunk/dports/cross/upslug2/files/11-r41.diff 2010-06-13 11:58:13 UTC (rev 68774)
@@ -0,0 +1,503 @@
+diff -Npru README.macosx.orig README.macosx
+--- README.macosx.orig 2005-11-11 17:34:41.000000000 +1100
++++ README.macosx 2006-09-12 02:36:11.000000000 +1000
+@@ -1,22 +1,65 @@
+-Starting with version 10 upslug2 is compatible with Mac OSX.
++Running upslug2 on Mac OSX
++==========================
++Starting with version 10 upslug2 is compatible with Mac OSX. Upslug2 is
++available both as a binary download and as a source package that you can
++compile yourself. Instructions for both methods are listed below.
++
++Background information
++======================
++Upslug2 requires libpcap to work on OSX. This library is included in OSX by
++default but that version does not support the functionality needed by upslug2.
++This is true for OSX 10.3 (Panther) and possibly also for 10.4 (Tiger) but
++that have not been checked. We need version 0.9.3 or greater of libpcap which
++can be found in DarwinPorts (http://www.darwinports.org) and also from Fink
++(http://fink.sourceforge.net) but that has not been tested. We will describe
++how to install libpcap from DarwinPorts.
++
++Darwinports
++===========
++To use upslug2 you need to have Darwinports installed on your Mac. Obtaining
++Darwinports and instructions for installing can be found here:
++http://darwinports.org/getdp/
++
++Note: There are separate downloads depending on which version of OS X you
++ are running. So make sure that you download the correct version.
++
++Installing libpcap
++==================
++When you have Darwinports installed you need to install 'libpcap' on your
++system. That is done by giving the following command on your terminal:
++
++sudo port install libpcap
++
++If you have downloaded the binary release of upslug2 you are now ready to
++start using upslug2 on your Mac so you can skip the instructions for
++compiling upslug2.
++
++Compile upslug2 on OSX
++======================
++If you want to compile upslug2 yourself you need to do like this.
++
++Note: These instructions are true for a normal installation of DarwinPorts.
++ If you have installed DarwinPorts in another location you need to
++ change the paths for CPPFLAGS and LDFLAGS.
+
+-Upslug2 requires libpcap version 0.9.3 or greater to work on OSX. By default,
+-libpcap is included in OSX but it doesn't support all needed functions. So you
+-will need to install a more recent version of libpcap. Fortunately the library
+-is available through DarwinPorts (http://www.darwinports.org). Maybe it is also
+-available from Fink (http://fink.sourceforge.net) but that has not been tested.
++CPPFLAGS=-I/opt/local/include LDFLAGS=-L/opt/local/lib ./configure --with-libpcap
++make
+
+-If you don't have DarwinPorts installed, go to the website and learn how to
+-use it. Just make sure you also install libpcap.
++If you want to install upslug2 permanently on your system:
++sudo make install
+
+-Now you are ready to build upslug2:
++If you want upslug2 to be installed to a specific location you need to
++add '--prefix=/<your path>' to the 'configure' command above.
+
+-By default, DarwinPorts will be installed in /opt. If you have it installed
+-in another location you have to adjust the path's below.
+-
+-CPPFLAGS=-I/opt/local/include LDFLAGS=-L/opt/local/lib ./configure --with-libpcap
+-make
+-make install
++If you do not want to install upslug2 you can either copy it manually to
++a suitable directory or just have upslug2 in the build directory.
+
++Using upslug2
++=============
+ Using upslug2 requires root access since the bpf-device(s) on OSX are
+ configured for read-only access for all other users.
++
++sudo upslug2 <options>
++
++If you are in the same directory as you built upslug2 and upslug2 is not in
++your PATH you need to invoke upslug2 with 'sudo ./upslug2 <options>'.
+diff -Npru configure.ac.orig configure.ac
+--- configure.ac.orig 2005-11-16 13:57:46.000000000 +1100
++++ configure.ac 2006-09-12 02:36:11.000000000 +1000
+@@ -2,7 +2,7 @@
+ # Process this file with autoconf to produce a configure script.
+
+ AC_PREREQ(2.59)
+-AC_INIT(upslug2, 11, http://sourceforge.net/projects/nslu/)
++AC_INIT(upslug2, 12, http://sourceforge.net/projects/nslu/)
+ AM_INIT_AUTOMAKE(1.9)
+ AC_CONFIG_SRCDIR([config.h.in])
+ AM_CONFIG_HEADER([config.h])
+@@ -12,6 +12,10 @@ AC_CANONICAL_HOST
+ case "$host" in
+ *-linux*)
+ AC_DEFINE(BROKEN_PCAP_TIMEOUT, 1, [Define if pcap_open_live timeout does not work])
++ AC_DEFINE(DEFAULT_ETHERNET_IF, "eth0", [Define default ethernet interface])
++ ;;
++ *-darwin*)
++ AC_DEFINE(DEFAULT_ETHERNET_IF, "en0", [Define default ethernet interface])
+ ;;
+ esac
+
+diff -Npru linux_wire.cc.orig linux_wire.cc
+--- linux_wire.cc.orig 2005-10-16 02:47:12.000000000 +1000
++++ linux_wire.cc 2006-09-12 02:36:11.000000000 +1000
+@@ -194,9 +194,9 @@ NSLU2Upgrade::Wire *NSLU2Upgrade::Wire::
+ if (packet_socket == (-1))
+ throw WireError(errno);
+
+- /* Check the device name. If not given use 'eth0'. */
++ /* Check the device name. If not given use 'DEFAULT_ETHERNET_IF'. */
+ if (device == NULL)
+- device = "eth0";
++ device = DEFAULT_ETHERNET_IF;
+
+ /* We are using a level which requires a hardware specific address,
+ * that's because the NSLU2 doesn't (for reasons which are far from
+diff -Npru nslu2_image.cc.orig nslu2_image.cc
+--- nslu2_image.cc.orig 2005-10-21 03:10:29.000000000 +1000
++++ nslu2_image.cc 2007-12-27 10:38:19.000000000 +1100
+@@ -5,6 +5,7 @@
+ */
+ #include <stdexcept>
+ #include <cstring>
++#include <iostream>
+ #include <fstream>
+ #include <cerrno>
+
+@@ -27,8 +28,8 @@ namespace NSLU2Image {
+ }
+ }
+
+- void SafeSeek(std::ifstream *stream, int offset, const char *name) {
+- stream->seekg(offset, std::ios::beg);
++ void SafeSeek(std::ifstream *stream, int offset, const char *name, std::ios::seekdir dir = std::ios::beg) {
++ stream->seekg(offset, dir);
+ if (!stream->good())
+ throw NSLU2Image::FileError(SizeError, name, errno);
+ }
+@@ -72,7 +73,7 @@ namespace NSLU2Image {
+ void Validate(const char *i) {
+ char signature[8];
+
+- SafeSeek(&image, NSLU2Protocol::FlashSize-8, i);
++ SafeSeek(&image, -8, i, std::ios::end);
+ SafeRead(&image, signature, 8, i);
+ if (memcmp(signature, "eRcOmM", 6) != 0)
+ throw NSLU2Image::FileError(DataError, i, 0);
+diff -Npru nslu2_upgrade.cc.orig nslu2_upgrade.cc
+--- nslu2_upgrade.cc.orig 2005-11-23 17:53:46.000000000 +1100
++++ nslu2_upgrade.cc 2007-12-27 10:38:19.000000000 +1100
+@@ -9,8 +9,10 @@
+
+ namespace NSLU2Upgrade {
+ /* Hardware ID field, add others as required. */
+- static const unsigned char NSLU2ID0[32] = {
+- 4, 112, 49, 149, 88, 16, /* remainder 0 */
++ static const unsigned char NSLU2ID0[][32] = {
++ {4, 112, 49, 149, 88, 16}, /* remainder 0 */
++ {0x44, 0x47, 0x38, 0x33, 0x34, 0x56, 0x33}, /* remainder 0 */
++ 0
+ };
+
+ /* Real implementations. */
+@@ -52,19 +54,26 @@ namespace NSLU2Upgrade {
+ */
+ if (receive.TypeOf() == NSLU2Protocol::HardwareInfo &&
+ receive.Sequence() == sequence &&
+- receive.DataLength() == NSLU2Protocol::HardwareInfoLength &&
++ receive.DataLength() == NSLU2Protocol::HardwareInfoLength
+ /* Validate the non-variable parts of the hardware
+ * info - this stuff is simply copied from the RedBoot
+ * part of the image, however the data in question is
+ * not actually from the RedBoot source/build - rather
+ * it is inserted when the flash image is built. This
+ * code checks the 32 byte 'hardware id' for a match.
+- */
+- memcmp(receive.Data()+4, NSLU2ID0, 32) == 0) {
++ */) {
++ /* try all IDs */
++ int found = 0, i;
++ const unsigned char *d = receive.Data()+4+32+2;
++ for(i = 0; NSLU2ID0[i][0]; i++)
++ if(memcmp(receive.Data()+4, NSLU2ID0[i], 32) == 0)
++ found = 1;
++ if(found == 0)
++ continue;
++
+ /* Copy out the ProductID, ProtocolID and
+ * FirmwareVersion fields.
+ */
+- const unsigned char *d = receive.Data()+4+32+2;
+ product_id = (d[0]<<8) + d[1], d += 4;
+ protocol_id = (d[0]<<8) + d[1], d += 4;
+ /* skip FunctionId */ d += 4;
+diff -Npru pcap_wire.cc.orig pcap_wire.cc
+--- pcap_wire.cc.orig 2005-11-23 18:13:51.000000000 +1100
++++ pcap_wire.cc 2006-09-12 02:36:11.000000000 +1000
+@@ -289,9 +289,9 @@ NSLU2Upgrade::Wire *NSLU2Upgrade::Wire::
+ /* This is used to store the error passed to throw. */
+ static char PCapErrbuf[PCAP_ERRBUF_SIZE];
+
+- /* Check the device name. If not given use 'eth0'. */
++ /* Check the device name. If not given use 'DEFAULT_ETHERNET_IF'. */
+ if (device == NULL)
+- device = "eth0";
++ device = DEFAULT_ETHERNET_IF;
+
+ pcap_t *pcap = NULL;
+ {
+diff -Npru upslug2.8.orig upslug2.8
+--- upslug2.8.orig 1970-01-01 10:00:00.000000000 +1000
++++ upslug2.8 2006-10-18 07:56:51.000000000 +1000
+@@ -0,0 +1,220 @@
++.\" $Id$
++.\"
++.\" Copyright (C) 2006 Martin Michlmayr <tbm at cyrius.com>
++.\"
++.\" Permission is hereby granted, free of charge, to any person
++.\" obtaining a copy of this software and associated documentation files
++.\" (the "Software"), to deal in the Software without restriction,
++.\" including without limitation the rights to use, copy, modify,
++.\" merge, publish, distribute, sublicense, and/or sell copies of the
++.\" Software, and to permit persons to whom the Software is furnished
++.\" to do so, subject to the following conditions:
++.\"
++.\" The above copyright notice and this permission notice shall be
++.\" included in all copies or substantial portions of the Software.
++.\"
++
++.TH UPSLUG2 8 "January 2006"
++.SH NAME
++upslug2 \- utility to upgrade the firmware of a NSLU2 via the network
++
++
++.SH SYNOPSIS
++.B upslug2
++[options]
++
++
++.SH DESCRIPTION
++
++.B upslug2
++is a command line program intended to allow the upgrade the firmware of a
++LinkSys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) to new or
++different versions. When a NSLU2 in the local network is put in upgrade
++mode,
++.B upslug2
++can connect to it and upload a new firmware.
++
++.B upslug2
++will accept a full firmware image but it can also upgrade the
++flash from individual files holding the kernel, ramdisk and root
++filesystem.
++.B upslug2
++provides status information during the upgrade process and verifies the
++written image after the upgrade.
++
++
++.SH OPTIONS
++
++.TP
++\fB\-C\fR, \fB\-\-Complete\-reprogram\fR
++Reprogram the complete flash, including the RedBoot boot loader and the
++SysConf partition holding configuration information. Using this option
++may result in the NSLU2 becoming permanently unusable! By default,
++.B upslug2
++will not touch these two partitions since this allows flashing a new
++firmware if an uploaded firmware does not work. This is not possible if
++RedBoot itself is damaged. Use with caution.
++
++.TP
++\fB\-d\fR, \fB\-\-device\fR
++The network device on the host machine connected to the network on which
++the NSLU2 is located. (Default: eth0).
++
++.TP
++\fB\-e\fR, \fB\-\-endian\fR
++The endianness of the files to be uploaded.
++.B upslug2
++will usually detected the endianness automatically but this option can be
++used to force byte swapping to occur. This option accepts three values,
++separated by comma: endianness of kernel, data and RedBoot FIS directory.
++Valid values are \fBl\fR (little endian), \fBp\fR (pdp endian) and \fBb\fR
++(big endian). (Default: ,b,b)
++
++.TP
++\fB\-f\fR, \fB\-\-from\fR
++The MAC address of the host system.
++
++.TP
++\fB\-h\fR, \fB\-\-help\fR
++Show summary of options.
++
++.TP
++\fB\-i\fR, \fB\-\-image\fR
++The flash image to use.
++
++.TP
++\fB\-j\fR, \fB\-\-rootfs\fR
++A root filesystem, usually of type jffs.
++
++.TP
++\fB\-k\fR, \fB\-\-kernel\fR
++A compressed kernel zImage image.
++
++.TP
++\fB\-n\fR, \fB\-\-no\-reboot\fR
++Do not reboot after upgrade
++
++.TP
++\fB\-p\fR, \fB\-\-payload\fR
++FIS directory payload. There are about 140 Kb in the last block (between
++the FIS dir and the trailer at the end) which can be used for data.
++
++.TP
++\fB\-r\fR, \fB\-\-ramdisk\fR
++A compressed ramdisk image.
++
++.TP
++\fB\-R\fR, \fB\-\-ram\-payload\fR
++A ram paylod (replaced ramdisk).
++(FIXME: if it replaced the ramdisk, why cannot you just use the -r option?
++What's the difference)
++
++.TP
++\fB\-t\fR, \fB\-\-target\fR
++The MAC address of the NSLU2 to upgrade. Without this option,
++.B upslug2
++will only perform an upgrade if there is just one NSLU2 in upgrade mode.
++
++.TP
++\fB\-U\fR, \fB\-\-no\-verify\fR
++Do not verify the image, only upgrade.
++
++.TP
++\fB\-v\fR, \fB\-\-verify\fR
++Do not write to flash, only verify the image.
++
++
++.SS Options to specify firmware information
++
++The following options should be used when individual kernel, ramdisk and
++root filesystem files are specified rather than a firmware image.
++
++.TP
++\fB\-E\fR, \fB\-\-extra\-version\fR
++Extra version information, a 2 byte value. (Default: 0x90f7)
++
++.TP
++\fB\-F\fR, \fB\-\-firmware\-version\fR
++The firmware version, a 2 byte value. (Default: 0x2329)
++
++.TP
++\fB\-P\fR, \fB\-\-product\-id\fR
++The product ID, a 2 byte value. (Default: 1)
++
++.TP
++\fB\-T\fR, \fB\-\-protocol\-id\fR
++The protocol ID, a 2 byte value. (Default: 0)
++
++
++.SH USING UPSLUG2
++
++In order to use
++.B upslug2
++the NSLU2 which is to be upgraded has to be put in upgrade mode:
++
++1. Disconnect any disks and/or devices from the USB ports.
++
++2. Power off the NSLU2
++
++3. Press and hold the reset button (accessible through the small hole on
++the back just above the power input).
++
++4. Press and release the power button to power on the NSLU2.
++
++5. Wait for 10 seconds watching the ready/status LED. After 10 seconds it
++will change from amber to red. Immediately release the reset button.
++
++6. The NSLU2 ready/status LED will flash alternately red/green (there is a
++1 second delay before the first green). The NSLU2 is now in upgrade mode.
++
++If you decide not to flash the image the NSLU2 can be rebooted by
++disconnecting the power. If the ready/status LED does not turn green after
++step four it will remain red for several seconds then flash amber. This
++happens if you do not release the reset button in time - pull the power,
++reconnect it and repeat from the second step.
++
++Once the NSLU2 is in upgrade mode it will remain in this state until either
++the power is connected or a new image has been flashed. If the flash fails
++the NSLU2 will (eventually) return to upgrade mode
++
++.SH EXAMPLES
++
++The most common use of
++.B upslug2
++is the following:
++.RS
++upslug2 \-\-image NSLU2_V23R63.bin
++.RE
++This specifies a firmware image which will be written to flash (with
++the exception of the RedBoot and SysConf partitions).
++
++Alternatively, kernel, ramdisk and root filesystem can be specified
++individually:
++.RS
++upslug2 \-k nslu2-zImage \-r ramdisk -\j root.jffs
++.RE
++In this case, the options \fB\-E\fR, \fB\-F\fR, \fB\-P\fR and \fB\-T\fR
++should typically be specified as well.
++
++By default,
++.B upslug2
++will search for the NSLU2 on the network on your eth0 network interface.
++If the network is on a different interface, you can easily specify it:
++.RS
++upslug2 \-d eth1 \-\-image NSLU2_V23R63.bin
++.RE
++
++If there are potentially more than one NSLU2 in your network which may be
++in upgrade mode, you can specify its MAC address:
++.RS
++upslug2 \-t 00:11:85:12:34:56 \-\-image NSLU2_V23R63.bin
++.RE
++
++.SH SEE ALSO
++.PP
++.BR slugimage (1)
++
++.SH AUTHOR
++.PP
++John Bowler <jbowler at acm.org>
++
+diff -Npru upslug2.cc.orig upslug2.cc
+--- upslug2.cc.orig 2005-11-23 17:54:08.000000000 +1100
++++ upslug2.cc 2006-09-12 02:36:11.000000000 +1000
+@@ -3,6 +3,8 @@
+ *
+ * The upslug2 main program for the command line implementation.
+ */
++#include "config.h"
++
+ #include <cstdio>
+ #include <cstring>
+ #include <cstdlib>
+@@ -38,7 +40,7 @@ public:
+ " Display:\n"
+ " <status> <address completed>+<bytes transmitted but not completed>\n"
+ " Status:\n"
+- " * timeout occured + sequence error detected\n\n",
++ " * timeout occurred + sequence error detected\n\n",
+ target[3], target[4], target[5],
+ target[0], target[1], target[2], target[3], target[4], target[5],
+ Indicator(UpSlug2::ProgressBar::Init),
+@@ -182,7 +184,7 @@ void Reboot(NSLU2Upgrade::DoUpgrade *upg
+ }
+
+ void help(struct option *options) {
+- std::fprintf(stderr, "upslug2: usage: upslug2 {options}\n options:\n");
++ std::fprintf(stderr, "Usage: upslug2 {options}\n options:\n");
+ while (options->name) {
+ std::fprintf(stderr, " -%c --%s\n", options->val, options->name);
+ ++options;
+@@ -190,13 +192,13 @@ void help(struct option *options) {
+ std::fprintf(stderr, "\n"
+ " Specify --target to upgrade an NSLU2 (or to verify a previous upgrade)\n"
+ " without no arguments upslug2 will list the NSLU2 machines which are currently\n"
+-" in upgrade mode (and do nothing else). Without --targeet upslug2 will only\n"
++" in upgrade mode (and do nothing else). Without --target upslug2 will only\n"
+ " perform an upgrade if there is just one NSLU2 in upgrade mode.\n"
+ "\n"
+ " Specify --image=<file> if a complete NSLU2 flash image is available, if\n"
+ " --Complete-reprogram is specified the whole flash image will be overwritten\n"
+ " (the NSLU2 may become permanently unuseable if this is done), otherwise the\n"
+-" RedBoot boot loader and currently 'SysConf' configuration is not changed.\n"
++" RedBoot boot loader and the current 'SysConf' configuration is not changed.\n"
+ "\n"
+ " Alternatively specify --kernel and --rootfs to build the image which will be\n"
+ " used to upgrade the NSLU2. In this case --product-id, --protocol-id and\n"
+@@ -369,7 +371,7 @@ int main(int argc, char **argv) {
+ char kernel_sex(0); /* Byte sex of kernel */
+ char data_sex('b'); /* Byte sex of data */
+ char directory_sex('b'); /* Byte sex of FIS directory entries */
+- const char* device = "eth0"; /* Hardware device to use */
++ const char* device = DEFAULT_ETHERNET_IF; /* Hardware device to use */
+ const char* target = "broadcast"; /* User specified target name */
+ const unsigned char*mac = 0; /* Ethernet address to upgrade. */
+ unsigned char macBuffer[6]; /* To store the command line address */
+@@ -396,7 +398,7 @@ int main(int argc, char **argv) {
+ /* The list of options, I combine the help text with the option name. */
+ struct option options[] = {
+ { "help: output this help message", no_argument, 0, 'h' },
+-{ "device[eth0]: local ethernet device to use", required_argument, 0, 'd' },
++{ "device[" DEFAULT_ETHERNET_IF "]: local ethernet device to use", required_argument, 0, 'd' },
+ { "target: NSLU2 to upgrade (MAC address)", required_argument, 0, 't' },
+ { "from: MAC of host (this machine)", required_argument, 0, 'f' },
+ { "verify: verify only (do not write flash)", no_argument, 0, 'v' },
Added: trunk/dports/cross/upslug2/files/patch-nslu2_protocol.h.diff
===================================================================
--- trunk/dports/cross/upslug2/files/patch-nslu2_protocol.h.diff (rev 0)
+++ trunk/dports/cross/upslug2/files/patch-nslu2_protocol.h.diff 2010-06-13 11:58:13 UTC (rev 68774)
@@ -0,0 +1,11 @@
+--- nslu2_protocol.h.orig 2010-05-16 01:15:04.000000000 +0200
++++ nslu2_protocol.h 2010-05-16 01:15:29.000000000 +0200
+@@ -183,7 +183,7 @@
+ MaxPacketLength = 1540-14, /* at least 600 from the RedBoot code */
+ BaseAddress = 0x60000, /* skip RedBoot and SysConf */
+ UpgradeProtocol = 0x8888, /* defined in the RedBoot code */
+- Ln2FlashSize = 23, /* 8MByte Flash memory */
++ Ln2FlashSize = 24, /* 16MByte Flash memory */
+ FlashSize = (1<<Ln2FlashSize),
+ /* The MaxPendingPackets figure is the number of packets which will
+ * be transmitted without receiving a response, this value should be
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20100613/e0267dc6/attachment-0001.html>
More information about the macports-changes
mailing list