[94190] trunk/dports/_resources/port1.0/group/pear-1.0.tcl
pixilla at macports.org
pixilla at macports.org
Mon Jun 11 15:21:37 PDT 2012
Revision: 94190
https://trac.macports.org/changeset/94190
Author: pixilla at macports.org
Date: 2012-06-11 15:21:37 -0700 (Mon, 11 Jun 2012)
Log Message:
-----------
pear-1.0.tcl: new portgroup, based on php5pear.tcl.
Added Paths:
-----------
trunk/dports/_resources/port1.0/group/pear-1.0.tcl
Added: trunk/dports/_resources/port1.0/group/pear-1.0.tcl
===================================================================
--- trunk/dports/_resources/port1.0/group/pear-1.0.tcl (rev 0)
+++ trunk/dports/_resources/port1.0/group/pear-1.0.tcl 2012-06-11 22:21:37 UTC (rev 94190)
@@ -0,0 +1,244 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
+# $Id: pear-1.0.tcl 89609 2012-02-03 23:25:15Z pixilla at macports.org $
+#
+# Copyright (c) 2011 The MacPorts Project
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. Neither the name of The MacPorts Project nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#
+# This PortGroup automatically sets up the standard environment for installing
+# a PHP PEAR class.
+#
+# Usage:
+#
+# PortGroup pear 1.0
+# pear.setup package version channel
+#
+# where package is the name of the PEAR package (e.g. AUTH), version is its
+# version, and channel is the channel hosting the package (default: pear.php.net).
+#
+
+# Args placed before the php or pear commands.
+options pear.env
+default pear.env {
+ "TZ=UTC \
+ HOME=${pear.installer} \
+ PHP_PEAR_INSTALL_DIR=${pear.installer}/pear \
+ PHP_PEAR_BIN_DIR=${pear.installer}/bin \
+ PHP_PEAR_PHP_BIN=${pear.cmd-php} \
+ PHP_PEAR_CFG_DIR=${pear.installer}/pear/cfg \
+ PHP_PEAR_DOC_DIR=${pear.installer}/pear/docs \
+ PHP_PEAR_DATA_DIR=${pear.installer}/pear/data \
+ PHP_PEAR_WWW_DIR=${pear.installer}/pear/www \
+ PHP_PEAR_TEST_DIR=${pear.installer}/pear/tests \
+ PHP_PEAR_SYSCONF_DIR=${pear.installer}"
+}
+
+# Args placed after php or pear commands.
+options pear.configure.pre_args
+default pear.configure.pre_args {
+ "-c ${pear.installer}/pear.conf \
+ -C ${pear.installer}/pear.conf"
+}
+
+# Where we instruct pear to install our package.
+options pear.destroot
+default pear.destroot {${worksrcpath}/packagingroot}
+
+# Where the pear installer is installed for each port.
+options pear.installer
+default pear.installer {${worksrcpath}/installer}
+
+# Where we expand our source files.
+options pear.sourceroot
+default pear.sourceroot {${worksrcpath}/packagesource}
+
+# The base paths for our pear.conf.
+options pear.instpath
+default pear.instpath {${prefix}/lib/php}
+options pear.pearpath
+default pear.pearpath {${pear.instpath}/pear}
+
+# The pear command we will use.
+options pear.cmd-pear
+default pear.cmd-pear {${pear.installer}/bin/pear}
+
+# The phar file that contains our pear installer.
+options pear.cmd-phar
+default pear.cmd-phar {${prefix}/lib/php/pear/install-pear-nozlib.phar}
+
+# The php binary we will use.
+options pear.cmd-php
+default pear.cmd-php {/usr/bin/php}
+
+# The pear channel for our package.
+options pear.channel
+
+# The name of the package xml file inside the pear package archive.
+options pear.packagexml
+default pear.packagexml {[lindex [exec tar -tzf ${pear.packagefile} | grep package.*\.xml] 0]}
+
+# Package name.
+options pear.package
+
+# Package file.
+options pear.packagefile
+default pear.packagefile {"${distpath}/[lindex $distfiles 0]"}
+
+proc pear.setup {package_name package_version {package_channel "pear.php.net"}} {
+ global name extract.suffix version
+ global pear.env pear.cmd-pear pear.destroot pear.sourceroot
+ global pear.channel pear.package pear.packagexml
+
+ # The pear name for the package.
+ pear.package ${package_name}
+ # The pear channel for the package.
+ pear.channel ${package_channel}
+
+ name pear-${pear.package}
+ version ${package_version}
+ categories php
+ distname ${pear.package}-${version}
+ extract.suffix .tgz
+ homepage http://${pear.channel}/package/${pear.package}
+ master_sites http://${pear.channel}/get
+ dist_subdir pear
+ supported_archs noarch
+ use_parallel_build yes
+ depends_lib port:pear-install-phar
+
+ # List of ports that pear-PEAR depends on.
+ # Add some pear-PEAR deps to make programmatic creation of pear Portfiles easier.
+ if {
+ ${name} != "pear-Archive_Tar" &&
+ ${name} != "pear-Console_Getopt" &&
+ ${name} != "pear-Structures_Graph" &&
+ ${name} != "pear-XML_Util" &&
+ ${name} != "pear-PEAR"
+ } {
+ depends_lib-append port:pear-PEAR
+ } elseif {
+ ${name} == "pear-PEAR"
+ } {
+ depends_lib-append port:pear-Archive_Tar \
+ port:pear-Console_Getopt \
+ port:pear-Structures_Graph \
+ port:pear-XML_Util
+
+ }
+
+ fetch.ignore_sslcert yes
+
+ extract.post_args-append -C '${pear.sourceroot}' --strip-components 1
+
+ pre-extract {
+ xinstall -d "${pear.sourceroot}"
+ }
+
+ post-extract {
+ # The "--strip-components 1" causes the loss of our package file so we will extract it now.
+ extract.post_args-delete --strip-components 1
+ extract.post_args-append ${pear.packagexml}
+ command_exec extract
+ }
+
+ post-patch {
+ # Some ports use a "." baseinstalldir which can cause issues creating pears packagingroot directory.
+ reinplace "s|baseinstalldir=\"\.\"|baseinstalldir=\"/\"|g" \
+ ${pear.sourceroot}/${pear.packagexml}
+ }
+
+ configure.env ${pear.env}
+ configure.dir ${pear.sourceroot}
+ configure {
+ # Install the pear command using the phar file.
+ configure.cmd ${pear.cmd-php}
+ configure.pre_args ${pear.cmd-phar}
+ command_exec configure
+ configure.cmd ${pear.cmd-pear}
+ configure.pre_args -c ${pear.installer}/pear.conf \
+ -C ${pear.installer}/pear.conf
+ # Set up pear's conf file.
+ # The order appears to be important; we get errors if we set php_dir before adding channels
+ # and the directory is not writable.
+ xinstall -d "${pear.installer}/pear/php"
+ set pear_config [list]
+ lappend pear_config "config-set auto_discover 1"
+ if { "${pear.channel}" != "pear.php.net" } {
+ lappend pear_config "channel-discover ${pear.channel}"
+ lappend pear_config "config-set default_channel ${pear.channel}"
+ }
+ # Change the install directories to the final destinations
+ lappend pear_config "config-set php_dir ${pear.pearpath}"
+ lappend pear_config "config-set bin_dir ${pear.pearpath}/bin"
+ lappend pear_config "config-set cfg_dir ${pear.pearpath}/cfg"
+ lappend pear_config "config-set doc_dir ${pear.pearpath}/docs"
+ lappend pear_config "config-set data_dir ${pear.pearpath}/data"
+ lappend pear_config "config-set www_dir ${pear.pearpath}/www"
+ lappend pear_config "config-set test_dir ${pear.pearpath}/tests"
+ lappend pear_config "config-show"
+ foreach pear_args $pear_config {
+ configure.args "${pear_args}"
+ command_exec configure
+ }
+ }
+
+ build {
+ build.env ${pear.env}
+ build.dir ${pear.sourceroot}
+ build.cmd ${pear.cmd-pear}
+ build.target install
+ build.args "-n -f -P '${pear.destroot}' ${pear.packagexml}"
+ command_exec build
+ }
+
+ destroot {
+ copy ${pear.destroot}${pear.instpath} ${destroot}${prefix}/lib
+ # Remove all invisible "dot" files.
+ fs-traverse -ignoreErrors item "${destroot}${pear.instpath}" {
+ if {[string first . [file tail ${item}] 0] == 0} {
+ if {[file tail ${item}] != "." && [file tail ${item}] != ".."} {
+ puts "Removing dot file ${item}"
+ delete ${item}
+ }
+ }
+ }
+ if { [file exists "${destroot}${pear.pearpath}/generate_package_xml.php"] } {
+ # Some pear packages contain package creation files so we remove them.
+ delete "${destroot}${pear.pearpath}/generate_package_xml.php"
+ }
+ if { [file exists "${destroot}${pear.pearpath}/package.php"] } {
+ # Some pear packages contain package creation files so we remove them.
+ delete "${destroot}${pear.pearpath}/package.php"
+ }
+ }
+
+ livecheck.type regex
+ livecheck.url http://${pear.channel}/package/${pear.package}/download
+ livecheck.regex http://download.${pear.channel}/package/
+ livecheck.regex-append "${pear.package}-((?!\\${extract.suffix}).*)\\${extract.suffix}"
+}
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20120611/1b501f77/attachment.html>
More information about the macports-changes
mailing list