[94195] users/dports/ports
dports at macports.org
dports at macports.org
Mon Jun 11 17:52:36 PDT 2012
Revision: 94195
https://trac.macports.org/changeset/94195
Author: dports at macports.org
Date: 2012-06-11 17:52:35 -0700 (Mon, 11 Jun 2012)
Log Message:
-----------
clean up my users directory
Removed Paths:
-------------
users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl
users/dports/ports/tex/
Deleted: users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl
===================================================================
--- users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl 2012-06-12 00:28:37 UTC (rev 94194)
+++ users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl 2012-06-12 00:52:35 UTC (rev 94195)
@@ -1,490 +0,0 @@
-# $Id$
-#
-# Copyright (c) 2010 Dan R. K. Ports <dports at macports.org>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. Neither the name of The MacPorts Project nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#
-# This portgroup contains common definitions for a MacPorts
-# installation of TeX Live. It can be used in one of two ways:
-#
-# 1. for installing "texmf ports". These contain tex files and are
-# installed from preprocessed distfiles made from TeXLive
-# packages. These ports should invoke texlive.texmfport to set up
-# the installation process.
-#
-# 2. other ports, like texlive-common or texlive-bin can include this
-# portgroup (but not call texlive.texmfport) to get texlive path
-# definitions and the like.
-
-#
-# texmf tree paths
-#
-
-# texmf files installed by texlive
-set texlive_texmfmain "${prefix}/share/texmf-texlive"
-
-# texmf files installed by texlive, but nominally distribution-independent
-# not clear it's really necessary to separate these from texmfmain,
-# but texlive goes to great effort to keep them separate, so we might as
-# well too
-set texlive_texmfdist "${prefix}/share/texmf-texlive-dist"
-
-# texmf files installed by ports other than texlive
-set texlive_texmfports "${prefix}/share/texmf"
-
-# optional tree for user-installed texmf files
-set texlive_texmflocal "${prefix}/share/texmf-local"
-
-# variable runtime data, e.g. formats
-set texlive_texmfsysvar "${prefix}/var/db/texmf"
-
-# configuration data from texconfig
-set texlive_texmfsysconfig "${prefix}/etc/texmf"
-
-# user's local texmf tree.
-# Note that this path is specified relative to the user's
-# home directory, i.e. it begins with an implicit ~/
-set texlive_texmfhome "Library/texmf"
-
-
-# location of binaries installed by texlive-bin
-#
-# All TeXLive binaries are built by texlive-bin, but most of them
-# aren't usable without the support files installed by other ports:
-# for example, xetex needs texlive-xetex, tex4ht needs
-# texlive-htmlxml, and just about everything needs texlive-basic. We
-# don't want to install useless files into $prefix/bin, so instead
-# texlive-bin installs its binaries into this "hidden" directory, and
-# other ports "activate" them when they are ready to be used by creating
-# symlinks into $prefix/bin.
-set texlive_bindir "${prefix}/libexec/texlive/binaries"
-
-# another directory containing symlinks to activated texlive binaries
-#
-# This is provided to support MacTeX's TeX Distribution preference
-# pane: it can select the active TeX distribution by pointing the
-# /usr/texbin symlink here
-#
-# It also seems like the prefpane wants architecture-specific links,
-# and may want version-specific ones in the future, so create those in
-# ${texlive_mactex_texdistdir}.
-set texlive_mactex_texbindir "${prefix}/libexec/texlive/texbin"
-set texlive_mactex_texdistdir "${prefix}/libexec/texlive/texdist"
-
-# update texmf file path databases (ls-R)
-#
-# This should be run in the post-activate/deactivate hooks of any port
-# that installs texmf files. It updates the kpathsea database using
-# mktexlsr (formerly texhash), as well as ConTeXt's cache.
-proc texlive.mktexlsr {} {
- global prefix
-
- # Run mktexlsr. If that's not available, something's wrong.
- system "${prefix}/bin/mktexlsr"
-
- # If mtxrun is available (i.e. ConTeXt is installed), update its
- # cache too. If it's not installed, that's OK.
- if [file exists "${prefix}/bin/mtxrun"] {
- system "${prefix}/bin/mtxrun --generate"
- }
-}
-
-# Remove dependencies on any texlive-documentation-* ports, for use by
-# -doc variants
-proc texlive.removedocdepends {} {
- global depends_lib
- foreach dep $depends_lib {
- if [regexp {^port:texlive-documentation-} $dep] {
- depends_lib-delete $dep
- }
- }
-}
-
-#
-# For installing texmf ports
-#
-
-# Files to skip installation of, specified in terms of their path in
-# the texmf tree, e.g. texmf-dist/foo/bar/
-options texlive.exclude
-default texlive.exclude {}
-
-options texlive.binaries texlive.formats texlive.languages texlive.maps
-default texlive.binaries {}
-default texlive.formats {}
-default texlive.languages {}
-default texlive.maps {}
-
-# Whether to regenerate all config files, maps, and formats after
-# activation regardless of whether any new ones are installed.
-options texlive.forceupdatecnf
-default texlive.forceupdatecnf no
-
-# Whether to run mktexlsr after activation. Usually required if
-# installing any texmf files.
-options texlive.use_mktexlsr
-default texlive.use_mktexlsr yes
-
-proc texlive.texmfport {} {
- homepage http://www.tug.org/texlive/
- platforms darwin
-
- supported_archs noarch
-
- master_sites http://flute.csail.mit.edu/texlive/
- use_xz yes
-
- global name master_sites distname extract.suffix
- livecheck.type regex
- livecheck.url ${master_sites}
- livecheck.regex ${name}-(\\d+)-run\\.tar
-
- depends_lib-append port:texlive-common port:texlive-bin
-
- # distfile is split into three parts, all of which extract into
- # $worksrcdir
- # - $distname-run contains the runtime files required to install the
- # package, as well as the "tlpkginfo" directory containing metadata
- # - $distname-doc contains optional documentation files
- # - $distname-src contains optional source code for installed files
- # The latter two are only downloaded if the corresponding variant
- # is enabled. Currently, each package must have all three distfiles
- # even if some are empty.
- distfiles ${distname}-run${extract.suffix}
-
- variant doc description "Install documentation" {
- distfiles-append ${distname}-doc${extract.suffix}
- }
- variant src description "Install TeX source" {
- distfiles-append ${distname}-src${extract.suffix}
- }
- default_variants +doc
-
- if {![variant_isset "doc"]} {
- # Skip any dependencies on texlive-documentation-* ports
- texlive.removedocdepends
- }
-
- use_configure no
-
- build { }
-
- destroot {
- xinstall -d ${destroot}${texlive_mactex_texbindir}
-
- set indexlist {"runfiles"}
- if {[variant_isset "doc"]} { lappend indexlist "docfiles" }
- if {[variant_isset "src"]} { lappend indexlist "srcfiles" }
-
- # copy files listed in tlpkginfo/$indexname into destroot
- foreach indexname $indexlist {
- set filelist [open ${worksrcpath}/tlpkginfo/${indexname}]
- while {[gets $filelist line] >= 0} {
- # Check if file is excluded
- set excluded false
- foreach excludeline ${texlive.exclude} {
- if {[string equal -nocase $line $excludeline]} {
- # file is specifically excluded
- set excluded true
- break
- }
- if {[string equal -nocase -length [expr [string length $excludeline] + 1] $line "$excludeline/"]} {
- # this is a file in an excluded directory
- set excluded true
- break;
- }
- }
- if {$excluded} {
- continue
- }
-
- set srcfile ${worksrcpath}/${indexname}/$line
-
- # check for manpages and treat specially
- if [regexp {^texmf/doc/man/man(\d)/([^/]+)} $line -> section filename] {
- if [string match "*.$section" $filename] {
- # actually a manpage; install it. If
- # texlive-bin installed a manpage with the
- # same name, use it instead to make sure the
- # documentation matches the binary.
- if [file exists ${texlive_bindir}/man${section}/$filename.gz] {
- ln -s ${texlive_bindir}/man${section}/$filename.gz \
- ${destroot}${prefix}/share/man/man$section/
- } else {
- copy $srcfile ${destroot}${prefix}/share/man/man$section/
- }
- } else {
- # not actually a manpage; do nothing
- # (e.g. don't install PDF manpages)
- }
- } else {
- # not a manpage; install into requested target dir
- # translate path in line to destination
- set splitline [split $line "/"]
- switch [lindex $splitline 0] {
- "texmf" {lset splitline 0 ${texlive_texmfmain}}
- "texmf-dist" {lset splitline 0 ${texlive_texmfdist}}
- default { ui_msg "warning: unknown file destination" }
- }
- set dstfile [join $splitline "/"]
-
- # create directory if necessary, and install file
- xinstall -d ${destroot}[file dirname $dstfile]
- copy ${srcfile} ${destroot}${dstfile}
- }
- }
- }
-
- # install a documentation file containing the list of TeX
- # packages installed. This also ensures that each port
- # provides at least one file, even if there's nothing to
- # install (e.g. documentation ports with -doc)
- xinstall -d ${destroot}${prefix}/share/doc/texlive
- set docfile [open ${destroot}${prefix}/share/doc/texlive/${name} "w"]
- puts $docfile "${name} version ${version} (MacPorts revision ${version}_${revision})"
- puts $docfile "\nTeX Live packages contained in this port:"
- set pkgfile [open ${worksrcpath}/tlpkginfo/pkgs]
- while {[gets $pkgfile line] >= 0} {
- set splitline [split $line]
- set pkg [lindex $splitline 0]
- set pkgdesc [join [lrange $splitline 1 end]]
- puts $docfile " $pkg: $pkgdesc"
- }
- close $pkgfile
- close $docfile
-
- # install fmtutil.cnf file
- if {${texlive.formats} != ""} {
- xinstall -d ${destroot}${texlive_texmfsysconfig}/fmtutil.d
- set fmtfilename \
- ${destroot}${texlive_texmfsysconfig}/fmtutil.d/10${name}.cnf
- set fmtfile [open $fmtfilename "w"]
- foreach x ${texlive.formats} {
- set fmtenabled [lindex $x 0]
- set fmtname [lindex $x 1]
- set fmtengine [lindex $x 2]
- set fmtpatterns [lindex $x 3]
- set fmtoptions [lindex $x 4]
- if {!$fmtenabled} {
- set fmtprefix "#! "
- } else {
- set fmtprefix ""
- }
-
- puts $fmtfile \
- "$fmtprefix$fmtname\t$fmtengine\t$fmtpatterns\t$fmtoptions"
-
- # Simulate texlinks
- if {[lsearch -exact ${texlive.binaries} $fmtname] != -1} {
- # Decide what to link. Use the specified engine
- # unless a binary with the same name as the
- # format exists (this can happen for metafont;
- # see #28890)
- #
- # It's OK if the binary named $fmtname is a broken
- # symlink, since we might be installing whatever
- # it's pointing to, hence the use of 'file lstat'.
- if {![catch {file lstat ${texlive_bindir}/$fmtname ignore}]} {
- set linksource ${texlive_bindir}/$fmtname
- } else {
- set linksource ${prefix}/bin/$fmtengine
- }
-
- ln -s $linksource \
- ${destroot}${prefix}/bin/$fmtname
- ln -s $linksource \
- ${destroot}${texlive_mactex_texbindir}/$fmtname
-
- # We've created the symlink for $fmtname; remove
- # it from texlive.binaries so we don't try to do
- # so again later.
- texlive.binaries-delete $fmtname
- }
- }
-
- close $fmtfile
- }
-
- # install updmap.cfg file
- if {${texlive.maps} != ""} {
- xinstall -d ${destroot}${texlive_texmfsysconfig}/updmap.d
- set mapfilename \
- ${destroot}${texlive_texmfsysconfig}/updmap.d/10${name}.cfg
- set mapfile [open $mapfilename "w"]
- foreach x ${texlive.maps} {
- puts $mapfile $x
- }
- close $mapfile
- }
-
- # install languages.dat and languages.def files
- if {${texlive.languages} != ""} {
- xinstall -d ${destroot}${texlive_texmfsysconfig}/language.d
- set langdatfilename \
- ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.dat
- set langdeffilename \
- ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.def
- set langluafilename \
- ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.dat.lua
- set langdatfile [open $langdatfilename "w"]
- set langdeffile [open $langdeffilename "w"]
- set langluafile [open $langluafilename "w"]
-
- foreach x ${texlive.languages} {
- set langname [lindex $x 0]
- set langfile [lindex $x 1]
- set langlhmin [lindex $x 2]
- set langrhmin [lindex $x 3]
- set langsyns [lindex $x 4]
- set langpatt [lindex $x 5]
- set langhyph [lindex $x 6]
- set langspecial [lindex $x 7]
-
- puts $langdatfile "$langname $langfile"
- foreach syn $langsyns {
- puts $langdatfile "=$syn"
- }
-
- foreach syn [concat $langname $langsyns] {
- puts $langdeffile "\\addlanguage{$syn}{$langfile}{}{$langlhmin}{$langrhmin}"
- }
-
- puts $langluafile "\t\['$langname'\] = {"
- puts $langluafile "\t\tloader = '$langfile',"
- puts $langluafile "\t\tlefthyphenmin = $langlhmin,"
- puts $langluafile "\t\trighthyphenmin = $langrhmin,"
- set qsyns {}
- foreach syn $langsyns {
- lappend qsyns "'$syn'"
- }
- set qsynlist [join $qsyns ", "]
- puts $langluafile "\t\tsynonyms = { $qsynlist },"
- if {$langpatt != ""} {
- puts $langluafile "\t\tpatterns = '$langpatt',"
- }
- if {$langhyph != ""} {
- puts $langluafile "\t\thyphenation = '$langhyph',"
- }
- if {$langspecial != ""} {
- puts $langluafile "\t\tpatterns = '$langspecial',"
- }
- puts $langluafile "\t},\n"
- }
-
- close $langdatfile
- close $langdeffile
- close $langluafile
- }
-
- # create symlinks for any binaries activated by the port
- foreach bin ${texlive.binaries} {
- ln -s ${texlive_bindir}/$bin ${destroot}${prefix}/bin
- ln -s ${texlive_bindir}/$bin ${destroot}${texlive_mactex_texbindir}
- }
- }
-
- post-activate {
- if {${texlive.use_mktexlsr}} {
- texlive.mktexlsr
- }
-
- if {${texlive.forceupdatecnf}} {
- # If force was specified, update all the config files, and
- # regenerate all maps and formats.
- system "${prefix}/libexec/texlive-update-cnf language.dat"
- system "${prefix}/libexec/texlive-update-cnf language.def"
- system "${prefix}/libexec/texlive-update-cnf language.dat.lua"
- system "${prefix}/libexec/texlive-update-cnf updmap.cfg"
- system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf"
- system "${prefix}/bin/updmap-sys"
- system "${prefix}/bin/fmtutil-sys --all"
- } else {
- # Otherwise, only update the config files that are
- # actually affected, and only generate the needed
- # formats.
- if {${texlive.languages} != ""} {
- system "${prefix}/libexec/texlive-update-cnf language.dat"
- system "${prefix}/libexec/texlive-update-cnf language.def"
- system "${prefix}/libexec/texlive-update-cnf language.dat.lua"
- }
- if {${texlive.maps} != ""} {
- system "${prefix}/libexec/texlive-update-cnf updmap.cfg"
- system "${prefix}/bin/updmap-sys"
- }
- if {${texlive.formats} != ""} {
- system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf"
- }
-
- # Regenerate formats. If we installed any hyphenation
- # patterns, then we need to regenerate all
- # formats. Otherwise, just generate the formats we just
- # installed.
- if {${texlive.languages} != ""} {
- system "${prefix}/bin/fmtutil-sys --all"
- } elseif {${texlive.formats} != ""} {
- foreach x ${texlive.formats} {
- set fmtname [lindex $x 1]
- system "${prefix}/bin/fmtutil-sys --byfmt $fmtname"
- }
- }
- }
- }
-
- post-deactivate {
- # Update ls-R and any config files to reflect that the package
- # is now gone
- texlive.mktexlsr
- if {${texlive.forceupdatecnf} || ${texlive.languages} != ""} {
- system "${prefix}/libexec/texlive-update-cnf language.dat"
- system "${prefix}/libexec/texlive-update-cnf language.def"
- system "${prefix}/libexec/texlive-update-cnf language.dat.lua"
- }
- if {${texlive.forceupdatecnf} || ${texlive.maps} != ""} {
- system "${prefix}/libexec/texlive-update-cnf updmap.cfg"
- }
- if {${texlive.forceupdatecnf} || ${texlive.formats} != ""} {
- system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf"
- }
-
- # Remove any generated format files
- foreach x ${texlive.formats} {
- set fmtname [lindex $x 1]
- set fmtengine [lindex $x 2]
- switch $fmtengine {
- "mf" -
- "mf-nowin" {set fmtengine "metafont"}
- "mpost" {set fmtengine "metapost"}
- }
-
- foreach filename [glob -nocomplain ${texlive_texmfsysvar}/web2c/$fmtengine/$fmtname.*] {
- delete $filename
- }
- }
- }
-}
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20120611/4b745503/attachment-0001.html>
More information about the macports-changes
mailing list