[92862] trunk/dports/net/openssh/Portfile

ryandesign at macports.org ryandesign at macports.org
Wed May 9 00:01:52 PDT 2012


Revision: 92862
          https://trac.macports.org/changeset/92862
Author:   ryandesign at macports.org
Date:     2012-05-09 00:01:50 -0700 (Wed, 09 May 2012)
Log Message:
-----------
openssh: whitespace changes to conform to modeline

Modified Paths:
--------------
    trunk/dports/net/openssh/Portfile

Modified: trunk/dports/net/openssh/Portfile
===================================================================
--- trunk/dports/net/openssh/Portfile	2012-05-09 06:37:15 UTC (rev 92861)
+++ trunk/dports/net/openssh/Portfile	2012-05-09 07:01:50 UTC (rev 92862)
@@ -1,117 +1,136 @@
 # -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
 # $Id$
 
-PortSystem 1.0
+PortSystem          1.0
 
-name            openssh
-version         5.9p1
-revision        3
+name                openssh
+version             5.9p1
+revision            3
+categories          net
+platforms           darwin
+maintainers         jwa openmaintainer
+license             BSD
+installs_libs       no
 
-categories      net
-maintainers     jwa openmaintainer
-description     OpenSSH secure login server
-long_description  OpenSSH is a FREE version of the SSH protocol suite of \
-          network connectivity tools that increasing numbers of people on the \
-          Internet are coming to rely on. Many users of telnet, rlogin, ftp, \
-          and other such programs might not realize that their password is \
-          transmitted across the Internet unencrypted, but it is. OpenSSH \
-          encrypts all traffic (including passwords) to effectively eliminate \
-          eavesdropping, connection hijacking, and other network-level \
-          attacks. Additionally, OpenSSH provides a myriad of secure \
-          tunneling capabilities, as well as a variety of authentication \
-          methods.
-homepage        http://www.openbsd.org/openssh/
-platforms       darwin
-license         BSD
-installs_libs   no
-checksums       ${distfiles} \
+description         OpenSSH secure login server
+
+long_description    OpenSSH is a FREE version of the SSH protocol suite of \
+                    network connectivity tools that increasing numbers of people on the \
+                    Internet are coming to rely on. Many users of telnet, rlogin, ftp, \
+                    and other such programs might not realize that their password is \
+                    transmitted across the Internet unencrypted, but it is. OpenSSH \
+                    encrypts all traffic (including passwords) to effectively eliminate \
+                    eavesdropping, connection hijacking, and other network-level \
+                    attacks. Additionally, OpenSSH provides a myriad of secure \
+                    tunneling capabilities, as well as a variety of authentication \
+                    methods.
+
+homepage            http://www.openbsd.org/openssh/
+
+checksums           ${distfiles} \
                     rmd160  12d92321a2b9f404641a9cdada738784eb30e1cd \
                     sha256  8d3e8b6b6ff04b525a6dfa6fdeb6a99043ccf6c3310cc32eba84c939b07777d5
 
-master_sites    openbsd:OpenSSH/portable \
-    http://mirror.mcs.anl.gov/openssh/portable/ \
-    ftp://ftp.cise.ufl.edu/pub/mirrors/openssh/portable/ \
-    ftp://reflection.ncsa.uiuc.edu/pub/OpenBSD/OpenSSH/portable/ \
-    ftp://mirror.mcs.anl.gov/pub/openssh/portable/ \
-    ftp://ftp.cse.buffalo.edu/pub/OpenBSD/OpenSSH/portable/ \
-    ftp://openbsd.mirrors.pair.com/ftp/OpenSSH/portable \
-    ftp://openbsd.secsup.org/pub/openbsd/OpenSSH/portable/
-depends_lib     port:openssl port:zlib port:kerberos5
-depends_run     port:xauth
+master_sites        openbsd:OpenSSH/portable \
+                    http://mirror.mcs.anl.gov/openssh/portable/ \
+                    ftp://ftp.cise.ufl.edu/pub/mirrors/openssh/portable/ \
+                    ftp://reflection.ncsa.uiuc.edu/pub/OpenBSD/OpenSSH/portable/ \
+                    ftp://mirror.mcs.anl.gov/pub/openssh/portable/ \
+                    ftp://ftp.cse.buffalo.edu/pub/OpenBSD/OpenSSH/portable/ \
+                    ftp://openbsd.mirrors.pair.com/ftp/OpenSSH/portable \
+                    ftp://openbsd.secsup.org/pub/openbsd/OpenSSH/portable/
 
-patchfiles \
-    launchd.patch
+depends_lib         port:openssl \
+                    port:zlib \
+                    port:kerberos5
 
+depends_run         port:xauth
+
+patchfiles          launchd.patch
+
 # Specified -fno-builtin because GCC 3.3 has log() as a builtin
 # (from math.h) while OpenSSH has its own log() function
 # -- from fink.
-configure.cppflags-append "-fno-builtin"
-configure.args --with-ssl-dir=${prefix} --sysconfdir=${prefix}/etc/ssh \
-    --with-privsep-path=${prefix}/var/empty --with-md5-passwords \
-    --with-pid-dir=${prefix}/var/run --with-tcp-wrappers \
-    --with-pam --disable-suid-ssh --with-random=/dev/urandom \
-    --mandir=${prefix}/share/man --with-zlib=${prefix} \
-    --with-kerberos5=${prefix} --with-xauth=${prefix}/bin/xauth \
-    --with-libedit
+configure.cppflags-append -fno-builtin
+configure.args      --with-ssl-dir=${prefix} \
+                    --sysconfdir=${prefix}/etc/ssh \
+                    --with-privsep-path=${prefix}/var/empty \
+                    --with-md5-passwords \
+                    --with-pid-dir=${prefix}/var/run \
+                    --with-tcp-wrappers \
+                    --with-pam \
+                    --disable-suid-ssh \
+                    --with-random=/dev/urandom \
+                    --mandir=${prefix}/share/man \
+                    --with-zlib=${prefix} \
+                    --with-kerberos5=${prefix} \
+                    --with-xauth=${prefix}/bin/xauth \
+                    --with-libedit
 
-use_parallel_build      yes
+use_parallel_build  yes
 
-destroot.target install-nokeys
+destroot.target     install-nokeys
 
 post-destroot {
-  destroot.keepdirs ${destroot}${prefix}/var/run ${destroot}${prefix}/var/empty
-  reinplace "s|#Port 22|Port 2222|g" ${destroot}${prefix}/etc/ssh/sshd_config
-  xinstall -m 755 ${worksrcpath}/contrib/ssh-copy-id ${destroot}${prefix}/bin
-  xinstall -m 644 ${worksrcpath}/contrib/ssh-copy-id.1 ${destroot}${prefix}/share/man/man1
+    destroot.keepdirs ${destroot}${prefix}/var/run ${destroot}${prefix}/var/empty
+    reinplace "s|#Port 22|Port 2222|g" ${destroot}${prefix}/etc/ssh/sshd_config
+    xinstall -m 755 ${worksrcpath}/contrib/ssh-copy-id ${destroot}${prefix}/bin
+    xinstall -m 644 ${worksrcpath}/contrib/ssh-copy-id.1 ${destroot}${prefix}/share/man/man1
 }
 
 variant no_x11 description "do not include xauth" {
-  configure.args-delete --with-xauth=${prefix}/bin/xauth
-  depends_run-delete    port:xauth
+    configure.args-delete   --with-xauth=${prefix}/bin/xauth
+    depends_run-delete      port:xauth
 }
 
 # For high-performance patch
 # re-enable when patch for current version is available
 variant hpn description "apply high performance patch" {
-  patch_sites-append    http://www.psc.edu/networking/projects/hpn-ssh/:hpn
-  patchfiles-append     ${distname}-hpn13v12.diff.gz:hpn
-  checksums-append      ${distname}-hpn13v12.diff.gz \
-                    rmd160  7ca2c431904b184072302cb3e9ab055ffb0f4024 \
-                    sha256  74499c3487a53eaaeaad79d89d8260c23f9a416173d7c256d1f3131677213040 \
+    patch_sites-append      http://www.psc.edu/networking/projects/hpn-ssh/:hpn
+    patchfiles-append       ${distname}-hpn13v12.diff.gz:hpn
+    checksums-append        ${distname}-hpn13v12.diff.gz \
+                            rmd160  7ca2c431904b184072302cb3e9ab055ffb0f4024 \
+                            sha256  74499c3487a53eaaeaad79d89d8260c23f9a416173d7c256d1f3131677213040 \
 
-  patch.pre_args
-  post-patch {
-    reinplace "s|TMP_SSH_VERSION SSH_PORTABLE|TMP_SSH_VERSION SSH_PORTABLE SSH_HPN|" ${worksrcpath}/version.h
-  }
+    patch.pre_args
+    post-patch {
+        reinplace "s|TMP_SSH_VERSION SSH_PORTABLE|TMP_SSH_VERSION SSH_PORTABLE SSH_HPN|" ${worksrcpath}/version.h
+    }
 }
 
 variant gss_api_trust_dns description "Enable GSSAPITrustDNS SSH configuration keyword" {
-  patchfiles-append GSSAPITrustDNS.patch
+    patchfiles-append       GSSAPITrustDNS.patch
 }
- 
-variant gsskex description "Add OpenSSH GSSAPI key exchange patch" { 
+
+variant gsskex description "Add OpenSSH GSSAPI key exchange patch" {
     set extra_cppflags [concat \
                             "-F/System/Library/Frameworks/OpenDirectory.framework" \
                             "-F/System/Library/Frameworks/CoreFoundation.framework" \
                             "-D_UTMPX_COMPAT -D__APPLE_LAUNCHD__ -D__APPLE_MEMBERSHIP__" \
-                            "-D__APPLE_XSAN__"] 
-    use_autoreconf yes 
-    patch.pre_args -p1 
-    patchfiles-append openssh-5.9p1-gsskex-all-20110920.patch apple-keychain.patch 
-    configure.args-append --with-4in6 --with-audit=bsm --with-keychain=apple \
-        --disable-utmp --disable-wtmp --with-privsep-user=_sshd \
-        CFLAGS="-fPIE -O2" CPPFLAGS="$extra_cppflags" \
-        LDFLAGS="-Wl,-pie -framework CoreFoundation -framework OpenDirectory" 
-} 
+                            "-D__APPLE_XSAN__"]
+    use_autoreconf          yes
+    patch.pre_args          -p1
+    patchfiles-append       openssh-5.9p1-gsskex-all-20110920.patch \
+                            apple-keychain.patch
+    configure.args-append   --with-4in6 \
+                            --with-audit=bsm \
+                            --with-keychain=apple \
+                            --disable-utmp \
+                            --disable-wtmp \
+                            --with-privsep-user=_sshd \
+                            CFLAGS="-fPIE -O2" \
+                            CPPFLAGS="$extra_cppflags" \
+                            LDFLAGS="-Wl,-pie -framework CoreFoundation -framework OpenDirectory"
+}
 
 platform darwin {
-  # create link to /usr/include/pam because 'security' was renamed to 'pam'
-  # in OS X.
-  pre-configure {
-    xinstall -d ${workpath}/include
-    file delete ${workpath}/include/security
-    ln -s /usr/include/pam ${workpath}/include/security
-  }
+    # create link to /usr/include/pam because 'security' was renamed to 'pam'
+    # in OS X.
+    pre-configure {
+        xinstall -d ${workpath}/include
+        file delete ${workpath}/include/security
+        ln -s /usr/include/pam ${workpath}/include/security
+    }
 }
 
 startupitem.create  yes
@@ -138,6 +157,6 @@
         fi"
 
 
-livecheck.type  regex
-livecheck.url   ${homepage}
-livecheck.regex (5.\[0-9\]p\[0-9\])
+livecheck.type      regex
+livecheck.url       ${homepage}
+livecheck.regex     (5.\[0-9\]p\[0-9\])
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20120509/56620875/attachment.html>


More information about the macports-changes mailing list