[99832] branches/pixilla-mysqls-55/dports/databases

pixilla at macports.org pixilla at macports.org
Sun Nov 18 12:05:03 PST 2012


Revision: 99832
          https://trac.macports.org/changeset/99832
Author:   pixilla at macports.org
Date:     2012-11-18 12:05:03 -0800 (Sun, 18 Nov 2012)
Log Message:
-----------
databases/percona:
databases/percona55:
- Unify percona and percona55.
- Obsolete percona replaced by percona55.

Added Paths:
-----------
    branches/pixilla-mysqls-55/dports/databases/percona55/
    branches/pixilla-mysqls-55/dports/databases/percona55/Portfile
    branches/pixilla-mysqls-55/dports/databases/percona55/files/
    branches/pixilla-mysqls-55/dports/databases/percona55/files/macports-default.cnf
    branches/pixilla-mysqls-55/dports/databases/percona55/files/my.cnf
    branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-cmake-install_layout.cmake.diff
    branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-plugin-percona-pam-for-mysql-CMakeLists.txt.diff
    branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-plugin-percona-pam-for-mysql-src-auth_pam_common.h.diff
    branches/pixilla-mysqls-55/dports/databases/percona55/files/percona
    branches/pixilla-mysqls-55/dports/databases/percona55/files/percona55

Removed Paths:
-------------
    branches/pixilla-mysqls-55/dports/databases/percona/

Added: branches/pixilla-mysqls-55/dports/databases/percona55/Portfile
===================================================================
--- branches/pixilla-mysqls-55/dports/databases/percona55/Portfile	                        (rev 0)
+++ branches/pixilla-mysqls-55/dports/databases/percona55/Portfile	2012-11-18 20:05:03 UTC (rev 99832)
@@ -0,0 +1,311 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
+# $Id$
+
+PortSystem          1.0
+
+name                percona55
+set name_mysql      ${name}
+set version_mysql   5.5.28
+set release         29.1
+# Please set revision_client and revision_server to 0 if you bump version_mysql or release.
+set revision_client 0
+set revision_server 0
+version             ${version_mysql}-${release}
+categories          databases
+platforms           darwin
+license             GPL-2
+maintainers         mac.com:quest openmaintainer
+homepage            http://www.percona.com/
+
+if {$subport == $name} {
+
+    PortGroup           archcheck 1.0
+    PortGroup           cmake 1.0
+    PortGroup           select 1.0
+
+    set version_branch  [join [lrange [split ${version} .] 0 1] .]
+    set version_manual  [join [lrange [split ${version} .] 0 1] {}]
+
+    revision            ${revision_client}
+    license             GPL-2
+    description         Multithreaded SQL database server
+    long_description    MySQL is an open-source, multi-threaded SQL database with a command \
+                        syntax very similar to mSQL.
+
+    master_sites \
+    http://www.percona.com/redir/downloads/Percona-Server-${version_branch}/Percona-Server-${version}/source/:src \
+    http://form.percona.com/rs/percona/images/:pdf
+
+    distname            Percona-Server-${version_mysql}-rel${release}
+    distfiles           ${distname}${extract.suffix}:src
+    use_parallel_build  yes
+
+    patch.pre_args      -p1
+    patchfiles          patch-cmake-install_layout.cmake.diff
+    # https://code.launchpad.net/~stewart/percona-pam-for-mysql/bug1012488
+    patchfiles-append   patch-plugin-percona-pam-for-mysql-CMakeLists.txt.diff \
+                        patch-plugin-percona-pam-for-mysql-src-auth_pam_common.h.diff
+
+    checksums           ${distname}${extract.suffix} \
+                        rmd160  8c3eab08d021111f4720f9ce6c06bd2bb70c18bf \
+                        sha256  2cacf3bd0f059c7ae3cb391bf2e4a2bdcbf490ed3465bfd4db9a02f0944f2d51 \
+
+    set manual_distfile Percona_Server_${version_manual}_Operations_Manual.pdf
+    extract.only        ${distname}${extract.suffix}
+    distfiles-append    ${manual_distfile}:pdf
+    checksums-append    ${manual_distfile} \
+                        rmd160  80261ad2723cad4a02439175bd3120f9657ebecf \
+                        sha256  031176de33d1def1a55eae90ef34e867164386929eaaa3e565e8d677025f7329
+
+    depends_lib-append  port:zlib
+    depends_run-append  port:mysql_select
+
+    select.group        mysql
+    select.file         ${filespath}/${name_mysql}
+
+    archcheck.files     lib/libz.dylib
+
+    post-extract {
+        file mkdir ${worksrcpath}/build_macports/macports
+        copy ${filespath}/macports-default.cnf \
+            ${filespath}/my.cnf \
+            ${worksrcpath}/build_macports/macports/
+        copy ${distpath}/${manual_distfile} \
+            ${worksrcpath}/build_macports/macports/
+    }
+
+    post-patch {
+        reinplace "s|@NAME@|${name_mysql}|g" \
+            ${worksrcpath}/cmake/install_layout.cmake
+        reinplace "s|@NAME@|${name_mysql}|g" \
+            ${worksrcpath}/build_macports/macports/macports-default.cnf \
+            ${worksrcpath}/build_macports/macports/my.cnf
+        reinplace "s|@PREFIX@|${prefix}|g" \
+            ${worksrcpath}/build_macports/macports/macports-default.cnf \
+            ${worksrcpath}/build_macports/macports/my.cnf
+    }
+
+    configure.cmd       cmake ..
+    configure.dir       ${worksrcpath}/build_macports
+    build.dir           ${worksrcpath}/build_macports
+
+    configure.args-delete \
+                        -DCMAKE_INSTALL_NAME_DIR=${prefix}/lib
+    configure.args-append \
+                        -DCMAKE_INSTALL_NAME_DIR:STRING=${prefix}/lib/${name_mysql}/mysql \
+                        -DINSTALL_LAYOUT:STRING=MACPORTS \
+                        -DSYSCONFDIR:PATH=${prefix}/etc/${name_mysql} \
+                        -DMYSQL_UNIX_ADDR:PATH=${prefix}/var/run/${name_mysql}/mysqld.sock \
+                        -DMYSQL_DATADIR:PATH=${prefix}/var/db/${name_mysql} \
+                        -DDEFAULT_CHARSET:STRING=utf8 \
+                        -DDEFAULT_COLLATION:STRING=utf8_general_ci \
+                        -DWITH_EMBEDDED_SERVER:BOOL=OFF \
+                        -DWITH_ZLIB:STRING=system \
+                        -DWITH_UNIT_TESTS:BOOL=ON \
+                        -DENABLE_GCOV:BOOL=OFF \
+                        -DENABLE_DTRACE:BOOL=OFF \
+                        -DWITH_READLINE:BOOL=ON \
+                        -DWITH_LIBWRAP:BOOL=ON \
+                        -DWITH_SSL:STRING=no
+
+    post-build {
+        set dirs ${worksrcpath}/build_macports
+        foreach dir ${dirs} {
+            reinplace -E {s|-arch [a-z0-9_]+||g} \
+                ${dir}/scripts/mysql_config \
+                ${dir}/scripts/mysqlbug
+        }
+    }
+
+    post-destroot {
+        # proc portdestroot::destroot_finish fails to find and compress our man pages
+        # so borrow the compress command and run on our files now.
+        set manpath "${destroot}${prefix}/share/man"
+        set gzip [findBinary gzip ${portutil::autoconf::gzip_path}]
+        foreach manpage [glob -type f ${destroot}${prefix}/share/man/${name_mysql}/man\[1-9\]/*] {
+            # Fix paths in manpages
+            reinplace "s|/etc/|${prefix}/etc/${name_mysql}/|g" ${manpage}
+            # Compress all manpages with gzip
+            system "$gzip -9vf ${manpage}"
+        }
+        foreach samp_conffile [glob -type f ${destroot}${prefix}/share/${name_mysql}/support-files/my-*.cnf] {
+            # Fix paths in sample configuration files
+            reinplace "s|/etc/my.cnf|${prefix}/etc/${name_mysql}/my.cnf|g" ${samp_conffile}
+        }
+        xinstall -m 755 -o root -d \
+            ${destroot}${prefix}/etc/${name_mysql}
+        copy ${worksrcpath}/build_macports/macports/macports-default.cnf \
+            ${destroot}${prefix}/etc/${name_mysql}/
+        xinstall -m 755 -o root -d \
+            ${destroot}${prefix}/share/${name_mysql}/support-files/macports
+        copy ${worksrcpath}/build_macports/macports/my.cnf \
+            ${destroot}${prefix}/share/${name_mysql}/support-files/macports/
+        copy ${worksrcpath}/build_macports/macports/${manual_distfile} \
+            ${destroot}${prefix}/share/doc/${name_mysql}/
+    }
+
+    post-install {
+        if {![file exists ${prefix}/etc/LaunchDaemons/org.macports.${name_mysql}/org.macports.${name_mysql}-server.plist]} {
+            ui_msg "The ${name_mysql} client has been installed."
+            ui_msg "To install the ${name_mysql} server, install the ${name_mysql}-server port."
+        }
+    }
+
+    pre-activate {
+        # The macports-default.cnf is installed by ${name_mysql}.
+        # Early versions of ${name_mysql}-server installed macports-default.cnf so for a
+        # reasonable period we need to deactivate older versions of the ${name_mysql}-server.
+        if { [file exists ${prefix}/etc/${name_mysql}/macports-default.cnf]
+            && ![catch {set vers [lindex [registry_active ${name_mysql}-server] 0]}]
+            && [vercmp [lindex $vers 1] 5.5.24-26.0] < 0 } {
+        
+            set deactivate_proc registry_deactivate_composite
+            if {[info commands registry_deactivate_composite] == {}} {
+                set deactivate_proc registry_deactivate
+            }
+            $deactivate_proc ${name_mysql}-server "" [list ports_nodepcheck 1]
+        }
+    }
+
+    post-activate {
+        if {![file exists ${prefix}/etc/${name_mysql}/my.cnf]} {
+            copy ${prefix}/share/${name_mysql}/support-files/macports/my.cnf \
+                ${prefix}/etc/${name_mysql}/
+        }
+    }
+
+    variant openssl description {Enable OpenSSL support} {
+
+        depends_lib-append      port:openssl
+        configure.args-delete   -DWITH_SSL:STRING=no
+        configure.args-append   -DWITH_SSL:STRING=system
+        archcheck.files-append  lib/libssl.dylib
+    }
+
+    variant system_readline description {Use system readline instead of bundled readline} {
+    
+        # Add readline support.
+        # "-DWITH_READLINE:BOOL=OFF" has the peculiar meaning "do not use the bundled copy
+        # of readline but use the system's (i.e. MacPorts') copy of readline"
+        depends_lib-append      port:readline
+        configure.args-delete   -DWITH_READLINE:BOOL=ON
+        configure.args-append   -DWITH_READLINE:BOOL=OFF
+        archcheck.files-append  lib/libreadline.dylib
+    }
+
+    livecheck.type      regex
+    livecheck.url       http://www.percona.com/downloads/Percona-Server-${version_branch}/
+    livecheck.regex     "/downloads/Percona-Server-${version_branch}/Percona-Server-(\[^/\]+)/"
+}
+
+subport ${name_mysql}-server {
+
+    revision            ${revision_server}
+    license             BSD
+    description         Run ${name_mysql} as server
+    long_description    ${description}
+
+    supported_archs     noarch
+    distfiles
+
+    depends_run         port:${name_mysql}
+
+    if {"darwin" == ${os.platform} && ${os.major} > 8} {
+        set mysqluser       _mysql
+    } else {
+        set mysqluser       mysql
+    }
+    add_users ${mysqluser} group=${mysqluser} realname=MySQL\ Server
+
+    startupitem.create      yes
+    startupitem.executable  ${prefix}/lib/${name_mysql}/bin/mysqld --user=${mysqluser}
+
+    use_configure       no
+
+    build {}
+
+    destroot {
+        xinstall -m 755 -o root -d \
+            ${destroot}${prefix}/var/run
+        xinstall -m 755 -o ${mysqluser} -g ${mysqluser} -d \
+            ${destroot}${prefix}/etc/${name_mysql} \
+            ${destroot}${prefix}/var/db/${name_mysql} \
+            ${destroot}${prefix}/var/log/${name_mysql} \
+            ${destroot}${prefix}/var/run/${name_mysql}
+        destroot.keepdirs-append  \
+            ${destroot}${prefix}/var/db/${name_mysql} \
+            ${destroot}${prefix}/var/log/${name_mysql} \
+            ${destroot}${prefix}/var/run/${name_mysql}
+    }
+
+    notes "
+If this is a new install you might want to run:
+
+\$ sudo -u ${mysqluser} ${prefix}/lib/${name_mysql}/bin/mysql_install_db
+"
+
+    livecheck.type          none
+}
+
+set name_mysql_old  percona
+set ver_mysql_old   5.5.27-29.0
+set rev_mysql_old   1
+
+subport ${name_mysql_old} {
+
+notes "
+
+This port is in the process of being replaced by ${name_mysql}.
+Please install the ${name_mysql} instead.
+
+Steps to move from ${name_mysql_old} to ${name_mysql}:
+1. Unload ${name_mysql_old}-server:
+    \$ sudo port unload ${name_mysql_old}-server
+2. Uninstall ${name_mysql_old} and ${name_mysql_old}-server.
+    \$ sudo port uninstall ${name_mysql_old}-server ${name_mysql_old}
+3. Install ${name_mysql} and ${name_mysql}-server.
+    \$ sudo port install ${name_mysql} ${name_mysql}-server
+4. Move your db files from ${prefix}/var/db/${name_mysql_old} to ${prefix}/var/db/${name_mysql}.
+    \$ sudo mv ${prefix}/var/db/${name_mysql_old}/* ${prefix}/var/db/${name_mysql}/
+5. Load ${name_mysql}-server and verify your databases are available.
+    \$ sudo port load ${name_mysql}-server
+
+"
+
+    replaced_by         ${name_mysql}
+    set obsolete.action readme
+    PortGroup           obsolete 1.0
+
+    version             ${ver_mysql_old}
+    revision            ${rev_mysql_old}
+}
+
+subport ${name_mysql_old}-server {
+
+
+notes "
+
+This port is in the process of being replaced by ${name_mysql}.
+Please install the ${name_mysql} instead.
+
+Steps to move from ${name_mysql_old} to ${name_mysql}:
+1. Unload ${name_mysql_old}-server:
+    \$ sudo port unload ${name_mysql_old}-server
+2. Uninstall ${name_mysql_old} and ${name_mysql_old}-server.
+    \$ sudo port uninstall ${name_mysql_old}-server ${name_mysql_old}
+3. Install ${name_mysql} and ${name_mysql}-server.
+    \$ sudo port install ${name_mysql} ${name_mysql}-server
+4. Move your db files from ${prefix}/var/db/${name_mysql_old} to ${prefix}/var/db/${name_mysql}.
+    \$ sudo mv ${prefix}/var/db/${name_mysql_old}/* ${prefix}/var/db/${name_mysql}/
+5. Load ${name_mysql}-server and verify your databases are available.
+    \$ sudo port load ${name_mysql}-server
+
+"
+
+    replaced_by         ${name_mysql}-server
+    set obsolete.action readme
+    PortGroup           obsolete 1.0
+
+    version             ${ver_mysql_old}
+    revision            ${rev_mysql_old}
+}


Property changes on: branches/pixilla-mysqls-55/dports/databases/percona55/Portfile
___________________________________________________________________
Added: svn:keywords
   + Id
Added: svn:eol-style
   + native

Added: branches/pixilla-mysqls-55/dports/databases/percona55/files/macports-default.cnf
===================================================================
--- branches/pixilla-mysqls-55/dports/databases/percona55/files/macports-default.cnf	                        (rev 0)
+++ branches/pixilla-mysqls-55/dports/databases/percona55/files/macports-default.cnf	2012-11-18 20:05:03 UTC (rev 99832)
@@ -0,0 +1,9 @@
+# WARNING! ANY CHANGES TO THIS FILE WILL BE LOST ON UNINSTALL/UPGRADES!
+# Make your changes to @PREFIX@/etc/@NAME@/my.cnf
+# YOU HAVE BEEN WARNED!
+
+# MacPorts default options
+[mysqld]
+# skip-networking so multple mysql server ports can be loaded
+# without each competing for port 3306.
+skip-networking

Added: branches/pixilla-mysqls-55/dports/databases/percona55/files/my.cnf
===================================================================
--- branches/pixilla-mysqls-55/dports/databases/percona55/files/my.cnf	                        (rev 0)
+++ branches/pixilla-mysqls-55/dports/databases/percona55/files/my.cnf	2012-11-18 20:05:03 UTC (rev 99832)
@@ -0,0 +1,2 @@
+# Use default MacPorts settings
+!include @PREFIX@/etc/@NAME@/macports-default.cnf

Added: branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-cmake-install_layout.cmake.diff
===================================================================
--- branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-cmake-install_layout.cmake.diff	                        (rev 0)
+++ branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-cmake-install_layout.cmake.diff	2012-11-18 20:05:03 UTC (rev 99832)
@@ -0,0 +1,52 @@
+--- a/cmake/install_layout.cmake	2012-03-15 07:14:58.000000000 -0700
++++ b/cmake/install_layout.cmake	2012-03-17 08:44:13.000000000 -0700
+@@ -68,7 +68,7 @@
+ ENDIF()
+ 
+ SET(INSTALL_LAYOUT "${DEFAULT_INSTALL_LAYOUT}"
+-CACHE STRING "Installation directory layout. Options are: STANDALONE (as in zip or tar.gz installer), RPM, DEB, SVR4")
++CACHE STRING "Installation directory layout. Options are: STANDALONE (as in zip or tar.gz installer), RPM, DEB, SVR4, MACPORTS")
+ 
+ IF(UNIX)
+   IF(INSTALL_LAYOUT MATCHES "RPM")
+@@ -86,7 +86,7 @@
+     SET(CMAKE_INSTALL_PREFIX ${default_prefix}
+       CACHE PATH "install prefix" FORCE)
+   ENDIF()
+-  SET(VALID_INSTALL_LAYOUTS "RPM" "STANDALONE" "DEB" "SVR4")
++  SET(VALID_INSTALL_LAYOUTS "RPM" "STANDALONE" "DEB" "SVR4" "MACPORTS")
+   LIST(FIND VALID_INSTALL_LAYOUTS "${INSTALL_LAYOUT}" ind)
+   IF(ind EQUAL -1)
+     MESSAGE(FATAL_ERROR "Invalid INSTALL_LAYOUT parameter:${INSTALL_LAYOUT}."
+@@ -214,6 +214,31 @@
+ SET(INSTALL_MYSQLDATADIR_SVR4           "/var/lib/mysql")
+ SET(INSTALL_PLUGINTESTDIR_SVR4          ${plugin_tests})
+ 
++#
++# MACPORTS layout
++#
++SET(INSTALL_BINDIR_MACPORTS             "lib/@NAME@/bin")
++SET(INSTALL_SBINDIR_MACPORTS            "lib/@NAME@/bin")
++SET(INSTALL_SCRIPTDIR_MACPORTS          "lib/@NAME@/bin")
++#
++SET(INSTALL_LIBDIR_MACPORTS             "lib/@NAME@/mysql")
++SET(INSTALL_PLUGINDIR_MACPORTS          "lib/@NAME@/plugin")
++#
++SET(INSTALL_INCLUDEDIR_MACPORTS         "include/@NAME@/mysql")
++#
++SET(INSTALL_DOCDIR_MACPORTS             "share/doc/@NAME@")
++SET(INSTALL_DOCREADMEDIR_MACPORTS       "share/doc/@NAME@")
++SET(INSTALL_MANDIR_MACPORTS             "share/man/@NAME@")
++SET(INSTALL_INFODIR_MACPORTS            "share/doc/@NAME@")
++#
++SET(INSTALL_SHAREDIR_MACPORTS           "share/@NAME@")
++SET(INSTALL_MYSQLSHAREDIR_MACPORTS      "share/@NAME@")
++SET(INSTALL_MYSQLTESTDIR_MACPORTS       "share/@NAME@/mysql-test")
++SET(INSTALL_SQLBENCHDIR_MACPORTS        "share/@NAME@")
++SET(INSTALL_SUPPORTFILESDIR_MACPORTS    "share/@NAME@/support-files")
++#
++SET(INSTALL_MYSQLDATADIR_MACPORTS       "var/db/@NAME@")
++SET(INSTALL_PLUGINTESTDIR_MACPORTS      ${plugin_tests})
+ 
+ # Clear cached variables if install layout was changed
+ IF(OLD_INSTALL_LAYOUT)

Added: branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-plugin-percona-pam-for-mysql-CMakeLists.txt.diff
===================================================================
--- branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-plugin-percona-pam-for-mysql-CMakeLists.txt.diff	                        (rev 0)
+++ branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-plugin-percona-pam-for-mysql-CMakeLists.txt.diff	2012-11-18 20:05:03 UTC (rev 99832)
@@ -0,0 +1,11 @@
+--- a/plugin/percona-pam-for-mysql/CMakeLists.txt	2012-06-24 11:50:56.000000000 -0700
++++ b/plugin/percona-pam-for-mysql/CMakeLists.txt	2012-06-24 13:48:30.000000000 -0700
+@@ -17,6 +17,8 @@
+ CHECK_LIBRARY_EXISTS(pam pam_authenticate "" HAVE_PAM) 
+ CHECK_SYMBOL_EXISTS(getpwnam_r "pwd.h" HAVE_GETPWNAM_R)
+ CHECK_SYMBOL_EXISTS(getgrgid_r "grp.h" HAVE_GETGRGID_R)
++CHECK_INCLUDE_FILES (security/pam_misc.h HAVE_SECURITY_PAM_MISC_H)
++CHECK_INCLUDE_FILES (security/openpam.h HAVE_SECURITY_OPENPAM_H)
+ IF(HAVE_PAM AND HAVE_GETPWNAM_R AND HAVE_GETGRGID_R)
+   SET(AUTH_PAM_COMMON_SOURCES 
+     src/auth_pam_common.c src/lib_auth_pam_client.c src/lib_auth_pam_client.h

Added: branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-plugin-percona-pam-for-mysql-src-auth_pam_common.h.diff
===================================================================
--- branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-plugin-percona-pam-for-mysql-src-auth_pam_common.h.diff	                        (rev 0)
+++ branches/pixilla-mysqls-55/dports/databases/percona55/files/patch-plugin-percona-pam-for-mysql-src-auth_pam_common.h.diff	2012-11-18 20:05:03 UTC (rev 99832)
@@ -0,0 +1,14 @@
+--- a/plugin/percona-pam-for-mysql/src/auth_pam_common.h	2012-06-24 11:50:56.000000000 -0700
++++ b/plugin/percona-pam-for-mysql/src/auth_pam_common.h	2012-06-24 13:47:31.000000000 -0700
+@@ -31,7 +31,11 @@
+ 
+ #include <security/pam_appl.h>
+ #include <security/pam_modules.h>
++#if HAVE_SECURITY_PAM_MISC_H
+ #include <security/pam_misc.h>
++#elif HAVE_SECURITY_OPENPAM_H
++#include <security/openpam.h>
++#endif
+ 
+ #include <mysql/plugin.h>
+ #include <mysql/plugin_auth.h>

Added: branches/pixilla-mysqls-55/dports/databases/percona55/files/percona
===================================================================
Added: branches/pixilla-mysqls-55/dports/databases/percona55/files/percona55
===================================================================
--- branches/pixilla-mysqls-55/dports/databases/percona55/files/percona55	                        (rev 0)
+++ branches/pixilla-mysqls-55/dports/databases/percona55/files/percona55	2012-11-18 20:05:03 UTC (rev 99832)
@@ -0,0 +1,141 @@
+-
+-
+-
+-
+-
+lib/percona55/bin/innochecksum
+lib/percona55/bin/msql2mysql
+lib/percona55/bin/my_print_defaults
+lib/percona55/bin/myisam_ftdump
+lib/percona55/bin/myisamchk
+lib/percona55/bin/myisamlog
+lib/percona55/bin/myisampack
+lib/percona55/bin/mysql
+lib/percona55/bin/mysql_client_test
+-
+lib/percona55/bin/mysql_config
+lib/percona55/bin/mysql_convert_table_format
+lib/percona55/bin/mysql_find_rows
+lib/percona55/bin/mysql_fix_extensions
+-
+lib/percona55/bin/mysql_install_db
+lib/percona55/bin/mysql_plugin
+lib/percona55/bin/mysql_secure_installation
+lib/percona55/bin/mysql_setpermission
+lib/percona55/bin/mysql_tzinfo_to_sql
+lib/percona55/bin/mysql_upgrade
+lib/percona55/bin/mysql_waitpid
+lib/percona55/bin/mysql_zap
+lib/percona55/bin/mysqlaccess
+lib/percona55/bin/mysqlaccess.conf
+lib/percona55/bin/mysqladmin
+lib/percona55/bin/mysqlbinlog
+lib/percona55/bin/mysqlbug
+lib/percona55/bin/mysqlcheck
+lib/percona55/bin/mysqld
+lib/percona55/bin/mysqld_multi
+lib/percona55/bin/mysqld_safe
+lib/percona55/bin/mysqldump
+lib/percona55/bin/mysqldumpslow
+lib/percona55/bin/mysqlhotcopy
+lib/percona55/bin/mysqlimport
+-
+lib/percona55/bin/mysqlshow
+lib/percona55/bin/mysqlslap
+lib/percona55/bin/mysqltest
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+lib/percona55/bin/perror
+lib/percona55/bin/replace
+lib/percona55/bin/resolve_stack_dump
+lib/percona55/bin/resolveip
+-
+share/man/percona55/man1/comp_err.1.gz
+share/man/percona55/man1/innochecksum.1.gz
+share/man/percona55/man1/msql2mysql.1.gz
+share/man/percona55/man1/my_print_defaults.1.gz
+share/man/percona55/man1/myisam_ftdump.1.gz
+share/man/percona55/man1/myisamchk.1.gz
+share/man/percona55/man1/myisamlog.1.gz
+share/man/percona55/man1/myisampack.1.gz
+share/man/percona55/man1/mysql-stress-test.pl.1.gz
+share/man/percona55/man1/mysql-test-run.pl.1.gz
+share/man/percona55/man1/mysql.1.gz
+share/man/percona55/man1/mysql.server.1.gz
+share/man/percona55/man1/mysql_client_test.1.gz
+share/man/percona55/man1/mysql_client_test_embedded.1.gz
+share/man/percona55/man1/mysql_config.1.gz
+share/man/percona55/man1/mysql_convert_table_format.1.gz
+share/man/percona55/man1/mysql_find_rows.1.gz
+share/man/percona55/man1/mysql_fix_extensions.1.gz
+-
+share/man/percona55/man1/mysql_install_db.1.gz
+share/man/percona55/man1/mysql_plugin.1.gz
+share/man/percona55/man1/mysql_secure_installation.1.gz
+share/man/percona55/man1/mysql_setpermission.1.gz
+share/man/percona55/man1/mysql_tzinfo_to_sql.1.gz
+share/man/percona55/man1/mysql_upgrade.1.gz
+share/man/percona55/man1/mysql_waitpid.1.gz
+share/man/percona55/man1/mysql_zap.1.gz
+share/man/percona55/man1/mysqlaccess.1.gz
+share/man/percona55/man1/mysqladmin.1.gz
+share/man/percona55/man1/mysqlbinlog.1.gz
+share/man/percona55/man1/mysqlbug.1.gz
+share/man/percona55/man1/mysqlcheck.1.gz
+share/man/percona55/man1/mysqld_multi.1.gz
+share/man/percona55/man1/mysqld_safe.1.gz
+share/man/percona55/man1/mysqldump.1.gz
+share/man/percona55/man1/mysqldumpslow.1.gz
+share/man/percona55/man1/mysqlhotcopy.1.gz
+share/man/percona55/man1/mysqlimport.1.gz
+share/man/percona55/man1/mysqlman.1.gz
+share/man/percona55/man1/mysqlshow.1.gz
+share/man/percona55/man1/mysqlslap.1.gz
+share/man/percona55/man1/mysqltest.1.gz
+share/man/percona55/man1/mysqltest_embedded.1.gz
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+share/man/percona55/man1/perror.1.gz
+share/man/percona55/man1/replace.1.gz
+share/man/percona55/man1/resolve_stack_dump.1.gz
+share/man/percona55/man1/resolveip.1.gz
+share/man/percona55/man8/mysqld.8.gz
+-
+-
+-
+-
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20121118/2e4cc14d/attachment-0001.html>


More information about the macports-changes mailing list