[105625] users/dports/ports
dports at macports.org
dports at macports.org
Sun Apr 28 01:31:17 PDT 2013
Revision: 105625
https://trac.macports.org/changeset/105625
Author: dports at macports.org
Date: 2013-04-28 01:31:17 -0700 (Sun, 28 Apr 2013)
Log Message:
-----------
copy tex to /users/dports
Added Paths:
-----------
users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl
users/dports/ports/tex/
Copied: users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl (from rev 105622, trunk/dports/_resources/port1.0/group/texlive-1.0.tcl)
===================================================================
--- users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl (rev 0)
+++ users/dports/ports/_resources/port1.0/group/texlive-1.0.tcl 2013-04-28 08:31:17 UTC (rev 105625)
@@ -0,0 +1,517 @@
+# $Id$
+#
+# Copyright (c) 2010 Dan R. K. Ports <dports at macports.org>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. Neither the name of The MacPorts Project nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# This portgroup contains common definitions for a MacPorts
+# installation of TeX Live. It can be used in one of two ways:
+#
+# 1. for installing "texmf ports". These contain tex files and are
+# installed from preprocessed distfiles made from TeXLive
+# packages. These ports should invoke texlive.texmfport to set up
+# the installation process.
+#
+# 2. other ports, like texlive-common or texlive-bin can include this
+# portgroup (but not call texlive.texmfport) to get texlive path
+# definitions and the like.
+
+#
+# texmf tree paths
+#
+
+# texmf files installed by texlive
+set texlive_texmfmain "${prefix}/share/texmf-texlive"
+
+# texmf files installed by texlive, but nominally distribution-independent
+# not clear it's really necessary to separate these from texmfmain,
+# but texlive goes to great effort to keep them separate, so we might as
+# well too
+set texlive_texmfdist "${prefix}/share/texmf-texlive-dist"
+
+# texmf files installed by ports other than texlive
+set texlive_texmfports "${prefix}/share/texmf"
+
+# optional tree for user-installed texmf files
+set texlive_texmflocal "${prefix}/share/texmf-local"
+
+# variable runtime data, e.g. formats
+set texlive_texmfsysvar "${prefix}/var/db/texmf"
+
+# configuration data from texconfig
+set texlive_texmfsysconfig "${prefix}/etc/texmf"
+
+# user's local texmf tree.
+# Note that this path is specified relative to the user's
+# home directory, i.e. it begins with an implicit ~/
+set texlive_texmfhome "Library/texmf"
+
+
+# location of binaries installed by texlive-bin
+#
+# All TeXLive binaries are built by texlive-bin, but most of them
+# aren't usable without the support files installed by other ports:
+# for example, xetex needs texlive-xetex, tex4ht needs
+# texlive-htmlxml, and just about everything needs texlive-basic. We
+# don't want to install useless files into $prefix/bin, so instead
+# texlive-bin installs its binaries into this "hidden" directory, and
+# other ports "activate" them when they are ready to be used by creating
+# symlinks into $prefix/bin.
+set texlive_bindir "${prefix}/libexec/texlive/binaries"
+
+# another directory containing symlinks to activated texlive binaries
+#
+# This is provided to support MacTeX's TeX Distribution preference
+# pane: it can select the active TeX distribution by pointing the
+# /usr/texbin symlink here
+#
+# It also seems like the prefpane wants architecture-specific links,
+# and may want version-specific ones in the future, so create those in
+# ${texlive_mactex_texdistdir}.
+set texlive_mactex_texbindir "${prefix}/libexec/texlive/texbin"
+set texlive_mactex_texdistdir "${prefix}/libexec/texlive/texdist"
+
+# update texmf file path databases (ls-R)
+#
+# This should be run in the post-activate/deactivate hooks of any port
+# that installs texmf files. It updates the kpathsea database using
+# mktexlsr (formerly texhash), as well as ConTeXt's cache.
+proc texlive.mktexlsr {} {
+ global prefix
+
+ # Run mktexlsr. If that's not available, something's wrong.
+ system "${prefix}/bin/mktexlsr"
+
+ # If mtxrun is available (i.e. ConTeXt is installed), update its
+ # cache too. If it's not installed, that's OK.
+ if [file exists "${prefix}/bin/mtxrun"] {
+ system "${prefix}/bin/mtxrun --generate"
+ }
+}
+
+# Remove dependencies on any texlive-documentation-* ports, for use by
+# -doc variants
+proc texlive.removedocdepends {} {
+ global depends_lib
+ foreach dep $depends_lib {
+ if [regexp {^port:texlive-documentation-} $dep] {
+ depends_lib-delete $dep
+ }
+ }
+}
+
+#
+# For installing texmf ports
+#
+
+# Files to skip installation of, specified in terms of their path in
+# the texmf tree, e.g. texmf-dist/foo/bar/
+options texlive.exclude
+default texlive.exclude {}
+
+options texlive.binaries texlive.formats texlive.languages texlive.maps
+default texlive.binaries {}
+default texlive.formats {}
+default texlive.languages {}
+default texlive.maps {}
+
+# Whether to regenerate all config files, maps, and formats after
+# activation regardless of whether any new ones are installed.
+options texlive.forceupdatecnf
+default texlive.forceupdatecnf no
+
+# Whether to run mktexlsr after (de)activation. Usually required if
+# installing any texmf files.
+options texlive.use_mktexlsr
+default texlive.use_mktexlsr yes
+
+# Running mktexlsr after deactivation can be disabled separately. Note
+# that the value of this option is ignored if use_mktexlsr is disabled.
+options texlive.use_mktexlsr_on_deactivate
+default texlive.use_mktexlsr_on_deactivate yes
+
+proc texlive.texmfport {} {
+ homepage http://www.tug.org/texlive/
+ platforms darwin
+
+ supported_archs noarch
+ installs_libs no
+
+ master_sites http://flute.csail.mit.edu/texlive/
+ use_xz yes
+
+ global name master_sites distname extract.suffix
+ livecheck.type regex
+ livecheck.url ${master_sites}
+ livecheck.regex ${name}-(\\d+)-run\\.tar
+
+ depends_lib-append port:texlive-common port:texlive-bin
+
+ # distfile is split into three parts, all of which extract into
+ # $worksrcdir
+ # - $distname-run contains the runtime files required to install the
+ # package, as well as the "tlpkginfo" directory containing metadata
+ # - $distname-doc contains optional documentation files
+ # - $distname-src contains optional source code for installed files
+ # The latter two are only downloaded if the corresponding variant
+ # is enabled. Currently, each package must have all three distfiles
+ # even if some are empty.
+ distfiles ${distname}-run${extract.suffix}
+
+ variant doc description "Install documentation" {
+ distfiles-append ${distname}-doc${extract.suffix}
+ }
+ variant src description "Install TeX source" {
+ distfiles-append ${distname}-src${extract.suffix}
+ }
+ default_variants +doc
+
+ if {![variant_isset "doc"]} {
+ # Skip any dependencies on texlive-documentation-* ports
+ texlive.removedocdepends
+ }
+
+ use_configure no
+
+ build { }
+
+ destroot {
+ xinstall -d ${destroot}${texlive_mactex_texbindir}
+
+ set indexlist {"runfiles"}
+ if {[variant_isset "doc"]} { lappend indexlist "docfiles" }
+ if {[variant_isset "src"]} { lappend indexlist "srcfiles" }
+
+ # copy files listed in tlpkginfo/$indexname into destroot
+ foreach indexname $indexlist {
+ set filelist [open ${worksrcpath}/tlpkginfo/${indexname}]
+ while {[gets $filelist line] >= 0} {
+ # Check if file is excluded
+ set excluded false
+ foreach excludeline ${texlive.exclude} {
+ if {[string equal -nocase $line $excludeline]} {
+ # file is specifically excluded
+ set excluded true
+ break
+ }
+ if {[string equal -nocase -length [expr [string length $excludeline] + 1] $line "$excludeline/"]} {
+ # this is a file in an excluded directory
+ set excluded true
+ break;
+ }
+ }
+ if {$excluded} {
+ continue
+ }
+
+ set srcfile ${worksrcpath}/${indexname}/$line
+
+ # check for manpages and treat specially
+ if [regexp {^texmf/doc/man/man(\d)/([^/]+)} $line -> section filename] {
+ if [string match "*.$section" $filename] {
+ # actually a manpage; install it. If
+ # texlive-bin installed a manpage with the
+ # same name, use it instead to make sure the
+ # documentation matches the binary.
+ if [file exists ${texlive_bindir}/man${section}/$filename.gz] {
+ ln -s ${texlive_bindir}/man${section}/$filename.gz \
+ ${destroot}${prefix}/share/man/man$section/
+ } else {
+ copy $srcfile ${destroot}${prefix}/share/man/man$section/
+ }
+ } else {
+ # not actually a manpage; do nothing
+ # (e.g. don't install PDF manpages)
+ }
+ } else {
+ # not a manpage; install into requested target dir
+ # translate path in line to destination
+ set splitline [split $line "/"]
+ switch [lindex $splitline 0] {
+ "texmf" {lset splitline 0 ${texlive_texmfmain}}
+ "texmf-dist" {lset splitline 0 ${texlive_texmfdist}}
+ default { ui_msg "warning: unknown file destination" }
+ }
+ set dstfile [join $splitline "/"]
+
+ # create directory if necessary, and install file
+ xinstall -d ${destroot}[file dirname $dstfile]
+ copy ${srcfile} ${destroot}${dstfile}
+ }
+ }
+ }
+
+ # install a documentation file containing the list of TeX
+ # packages installed. This also ensures that each port
+ # provides at least one file, even if there's nothing to
+ # install (e.g. documentation ports with -doc)
+ xinstall -d ${destroot}${prefix}/share/doc/texlive
+ set docfile [open ${destroot}${prefix}/share/doc/texlive/${name} "w"]
+ puts $docfile "${name} version ${version} (MacPorts revision ${version}_${revision})"
+ puts $docfile "\nTeX Live packages contained in this port:"
+ set pkgfile [open ${worksrcpath}/tlpkginfo/pkgs]
+ while {[gets $pkgfile line] >= 0} {
+ set splitline [split $line]
+ set pkg [lindex $splitline 0]
+ set pkgdesc [join [lrange $splitline 1 end]]
+ puts $docfile " $pkg: $pkgdesc"
+ }
+ close $pkgfile
+ close $docfile
+
+ # install fmtutil.cnf file
+ if {${texlive.formats} != ""} {
+ xinstall -d ${destroot}${texlive_texmfsysconfig}/fmtutil.d
+ set fmtfilename \
+ ${destroot}${texlive_texmfsysconfig}/fmtutil.d/10${name}.cnf
+ set fmtfile [open $fmtfilename "w"]
+ foreach x ${texlive.formats} {
+ set fmtenabled [lindex $x 0]
+ set fmtname [lindex $x 1]
+ set fmtengine [lindex $x 2]
+ set fmtpatterns [lindex $x 3]
+ set fmtoptions [lindex $x 4]
+ if {!$fmtenabled} {
+ set fmtprefix "#! "
+ } else {
+ set fmtprefix ""
+ }
+
+ puts $fmtfile \
+ "$fmtprefix$fmtname\t$fmtengine\t$fmtpatterns\t$fmtoptions"
+
+ # Simulate texlinks
+ if {[lsearch -exact ${texlive.binaries} $fmtname] != -1} {
+ # Decide what to link. Use the specified engine
+ # unless a binary with the same name as the
+ # format exists (this can happen for metafont;
+ # see #28890)
+ #
+ # It's OK if the binary named $fmtname is a broken
+ # symlink, since we might be installing whatever
+ # it's pointing to, hence the use of 'file lstat'.
+ if {![catch {file lstat ${texlive_bindir}/$fmtname ignore}]} {
+ set linksource ${texlive_bindir}/$fmtname
+ } else {
+ set linksource ${prefix}/bin/$fmtengine
+ }
+
+ ln -s $linksource \
+ ${destroot}${prefix}/bin/$fmtname
+ ln -s $linksource \
+ ${destroot}${texlive_mactex_texbindir}/$fmtname
+
+ # We've created the symlink for $fmtname; remove
+ # it from texlive.binaries so we don't try to do
+ # so again later.
+ texlive.binaries-delete $fmtname
+ }
+ }
+
+ close $fmtfile
+ }
+
+ # install updmap.cfg file
+ if {${texlive.maps} != ""} {
+ xinstall -d ${destroot}${texlive_texmfsysconfig}/updmap.d
+ set mapfilename \
+ ${destroot}${texlive_texmfsysconfig}/updmap.d/10${name}.cfg
+ set mapfile [open $mapfilename "w"]
+ foreach x ${texlive.maps} {
+ puts $mapfile $x
+ }
+ close $mapfile
+ }
+
+ # install languages.dat and languages.def files
+ if {${texlive.languages} != ""} {
+ xinstall -d ${destroot}${texlive_texmfsysconfig}/language.d
+ set langdatfilename \
+ ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.dat
+ set langdeffilename \
+ ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.def
+ set langluafilename \
+ ${destroot}${texlive_texmfsysconfig}/language.d/10${name}.dat.lua
+ set langdatfile [open $langdatfilename "w"]
+ set langdeffile [open $langdeffilename "w"]
+ set langluafile [open $langluafilename "w"]
+
+ foreach x ${texlive.languages} {
+ set langname [lindex $x 0]
+ set langfile [lindex $x 1]
+ set langlhmin [lindex $x 2]
+ set langrhmin [lindex $x 3]
+ set langsyns [lindex $x 4]
+ set langpatt [lindex $x 5]
+ set langhyph [lindex $x 6]
+ set langspecial [lindex $x 7]
+
+ puts $langdatfile "$langname $langfile"
+ foreach syn $langsyns {
+ puts $langdatfile "=$syn"
+ }
+
+ foreach syn [concat $langname $langsyns] {
+ puts $langdeffile "\\addlanguage{$syn}{$langfile}{}{$langlhmin}{$langrhmin}"
+ }
+
+ puts $langluafile "\t\['$langname'\] = {"
+ puts $langluafile "\t\tloader = '$langfile',"
+ puts $langluafile "\t\tlefthyphenmin = $langlhmin,"
+ puts $langluafile "\t\trighthyphenmin = $langrhmin,"
+ set qsyns {}
+ foreach syn $langsyns {
+ lappend qsyns "'$syn'"
+ }
+ set qsynlist [join $qsyns ", "]
+ puts $langluafile "\t\tsynonyms = { $qsynlist },"
+ if {$langpatt != ""} {
+ puts $langluafile "\t\tpatterns = '$langpatt',"
+ }
+ if {$langhyph != ""} {
+ puts $langluafile "\t\thyphenation = '$langhyph',"
+ }
+ if {$langspecial != ""} {
+ puts $langluafile "\t\tpatterns = '$langspecial',"
+ }
+ puts $langluafile "\t},\n"
+ }
+
+ close $langdatfile
+ close $langdeffile
+ close $langluafile
+ }
+
+ # create symlinks for any binaries activated by the port
+ foreach bin ${texlive.binaries} {
+ ln -s ${texlive_bindir}/$bin ${destroot}${prefix}/bin
+ ln -s ${texlive_bindir}/$bin ${destroot}${texlive_mactex_texbindir}
+ }
+ }
+
+ post-activate {
+ # Disable mktexlsr if it's not installed and this is a
+ # texlive-documentation-* port. It's possible (if unlikely) to
+ # install them without texlive-basic, so mktexlsr might not
+ # exist, but if it does we do want to run it.
+ if {[regexp {^texlive-documentation-} $name] &&
+ ![file exists ${prefix}/bin/mktexlsr]} {
+ texlive.use_mktexlsr no
+ }
+
+ if {${texlive.use_mktexlsr}} {
+ texlive.mktexlsr
+ }
+
+ if {${texlive.forceupdatecnf}} {
+ # If force was specified, update all the config files, and
+ # regenerate all maps and formats.
+ system "${prefix}/libexec/texlive-update-cnf language.dat"
+ system "${prefix}/libexec/texlive-update-cnf language.def"
+ system "${prefix}/libexec/texlive-update-cnf language.dat.lua"
+ system "${prefix}/libexec/texlive-update-cnf updmap.cfg"
+ system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf"
+ system "${prefix}/bin/updmap-sys"
+ # format generation might fail if we are in the middle of
+ # a major upgrade and have not yet updated all texlive ports.
+ # Catch the error to prevent the upgrade from failing.
+ catch {system "${prefix}/bin/fmtutil-sys --all"}
+ } else {
+ # Otherwise, only update the config files that are
+ # actually affected, and only generate the needed
+ # formats.
+ if {${texlive.languages} != ""} {
+ system "${prefix}/libexec/texlive-update-cnf language.dat"
+ system "${prefix}/libexec/texlive-update-cnf language.def"
+ system "${prefix}/libexec/texlive-update-cnf language.dat.lua"
+ }
+ if {${texlive.maps} != ""} {
+ system "${prefix}/libexec/texlive-update-cnf updmap.cfg"
+ system "${prefix}/bin/updmap-sys"
+ }
+ if {${texlive.formats} != ""} {
+ system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf"
+ }
+
+ # Regenerate formats. If we installed any hyphenation
+ # patterns, then we need to regenerate all
+ # formats. Otherwise, just generate the formats we just
+ # installed.
+ if {${texlive.languages} != ""} {
+ catch {system "${prefix}/bin/fmtutil-sys --all"}
+ } elseif {${texlive.formats} != ""} {
+ foreach x ${texlive.formats} {
+ set fmtname [lindex $x 1]
+ catch {system "${prefix}/bin/fmtutil-sys --byfmt $fmtname"}
+ }
+ }
+ }
+ }
+
+ post-deactivate {
+ # Disable mktexlsr if it's not installed and this is a
+ # texlive-documentation-* port. See post-activate for why.
+ if {[regexp {^texlive-documentation-} $name] &&
+ ![file exists ${prefix}/bin/mktexlsr]} {
+ texlive.use_mktexlsr no
+ }
+
+ # Update ls-R and any config files to reflect that the package
+ # is now gone
+ if {${texlive.use_mktexlsr} && ${texlive.use_mktexlsr_on_deactivate}} {
+ texlive.mktexlsr
+ }
+ if {${texlive.forceupdatecnf} || ${texlive.languages} != ""} {
+ system "${prefix}/libexec/texlive-update-cnf language.dat"
+ system "${prefix}/libexec/texlive-update-cnf language.def"
+ system "${prefix}/libexec/texlive-update-cnf language.dat.lua"
+ }
+ if {${texlive.forceupdatecnf} || ${texlive.maps} != ""} {
+ system "${prefix}/libexec/texlive-update-cnf updmap.cfg"
+ }
+ if {${texlive.forceupdatecnf} || ${texlive.formats} != ""} {
+ system "${prefix}/libexec/texlive-update-cnf fmtutil.cnf"
+ }
+
+ # Remove any generated format files
+ foreach x ${texlive.formats} {
+ set fmtname [lindex $x 1]
+ set fmtengine [lindex $x 2]
+ switch $fmtengine {
+ "mf" -
+ "mf-nowin" {set fmtengine "metafont"}
+ "mpost" {set fmtengine "metapost"}
+ }
+
+ foreach filename [glob -nocomplain ${texlive_texmfsysvar}/web2c/$fmtengine/$fmtname.*] {
+ delete $filename
+ }
+ }
+ }
+}
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20130428/315c0037/attachment.html>
More information about the macports-changes
mailing list