[109118] branches/subversion-subports/dports/devel
larryv at macports.org
larryv at macports.org
Wed Aug 7 22:32:17 PDT 2013
Revision: 109118
https://trac.macports.org/changeset/109118
Author: larryv at macports.org
Date: 2013-08-07 22:32:17 -0700 (Wed, 07 Aug 2013)
Log Message:
-----------
[subversion-subports] Retab and add modelines.
Modified Paths:
--------------
branches/subversion-subports/dports/devel/subversion/Portfile
branches/subversion-subports/dports/devel/subversion-javahlbindings/Portfile
branches/subversion-subports/dports/devel/subversion-perlbindings/Portfile
branches/subversion-subports/dports/devel/subversion-python24bindings/Portfile
branches/subversion-subports/dports/devel/subversion-python25bindings/Portfile
branches/subversion-subports/dports/devel/subversion-python26bindings/Portfile
branches/subversion-subports/dports/devel/subversion-python27bindings/Portfile
branches/subversion-subports/dports/devel/subversion-rubybindings/Portfile
Modified: branches/subversion-subports/dports/devel/subversion/Portfile
===================================================================
--- branches/subversion-subports/dports/devel/subversion/Portfile 2013-08-08 04:42:19 UTC (rev 109117)
+++ branches/subversion-subports/dports/devel/subversion/Portfile 2013-08-08 05:32:17 UTC (rev 109118)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
PortSystem 1.0
@@ -2,147 +3,147 @@
-name subversion
-version 1.8.1
-revision 1
-categories devel
-platforms darwin
-maintainers geeklair.net:dluke blair
-description subversion (svn) -- a version control system designed to be a better cvs
-license Apache-2
+name subversion
+version 1.8.1
+revision 1
+categories devel
+platforms darwin
+maintainers geeklair.net:dluke blair
+description subversion (svn) -- a version control system designed to be a better cvs
+license Apache-2
-long_description Subversion (svn) is a version control system designed to be \
- as similar to cvs(1) as possible, while fixing many \
- outstanding problems with cvs(1).
+long_description Subversion (svn) is a version control system designed to be \
+ as similar to cvs(1) as possible, while fixing many \
+ outstanding problems with cvs(1).
-homepage http://subversion.apache.org/
-master_sites apache:subversion
-use_bzip2 yes
-checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
- sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
- rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
+homepage http://subversion.apache.org/
+master_sites apache:subversion
+use_bzip2 yes
+checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
+ sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
+ rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
-depends_lib port:expat \
- port:apr port:apr-util \
- port:db46 port:sqlite3 \
- port:gettext port:libiconv \
- port:serf1 port:cyrus-sasl2 \
- port:file port:libcomerr
-depends_run port:curl-ca-bundle
+depends_lib port:expat \
+ port:apr port:apr-util \
+ port:db46 port:sqlite3 \
+ port:gettext port:libiconv \
+ port:serf1 port:cyrus-sasl2 \
+ port:file port:libcomerr
+depends_run port:curl-ca-bundle
-test.run yes
-test.target check
-test.env CLEANUP=true
+test.run yes
+test.target check
+test.env CLEANUP=true
-patchfiles config_impl.h.patch
+patchfiles config_impl.h.patch
-post-patch { reinplace "s|__PREFIX__|${prefix}|" ${worksrcpath}/subversion/libsvn_subr/config_impl.h
- }
+post-patch { reinplace "s|__PREFIX__|${prefix}|" ${worksrcpath}/subversion/libsvn_subr/config_impl.h
+ }
-configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
- --with-apr=${prefix}/bin/apr-1-config \
- --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
- --mandir=\\\${prefix}/share/man \
- --with-serf=${prefix} \
- --with-sasl=${prefix} \
- --with-libmagic=${prefix} \
- --without-gnome-keyring
+configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
+ --with-apr=${prefix}/bin/apr-1-config \
+ --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
+ --mandir=\\\${prefix}/share/man \
+ --with-serf=${prefix} \
+ --with-sasl=${prefix} \
+ --with-libmagic=${prefix} \
+ --without-gnome-keyring
-use_parallel_build yes
-build.target all tools
+use_parallel_build yes
+build.target all tools
destroot.target-append install-tools
-pre-test { set x {}
- fs-traverse dir ${worksrcpath}/subversion {
- if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
- lappend x ${dir}
- continue
- }
- }
+pre-test { set x {}
+ fs-traverse dir ${worksrcpath}/subversion {
+ if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
+ lappend x ${dir}
+ continue
+ }
+ }
- test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
- }
+ test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
+ }
-pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
- ${worksrcpath}/configure
- }
+pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
+ ${worksrcpath}/configure
+ }
-post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
- ${worksrcpath}/libtool
- }
+post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
+ ${worksrcpath}/libtool
+ }
-post-destroot { # install global config file so curl-ca-bundle certs are used
- xinstall -d ${destroot}${prefix}/etc/subversion
- xinstall -m 644 ${filespath}/servers.default ${destroot}${prefix}/etc/subversion
- # install bash completion file
- set completions_path ${destroot}${prefix}/share/bash-completion/completions
- xinstall -d ${completions_path}
- xinstall -m 644 ${worksrcpath}/tools/client-side/bash_completion ${completions_path}/subversion
- }
+post-destroot { # install global config file so curl-ca-bundle certs are used
+ xinstall -d ${destroot}${prefix}/etc/subversion
+ xinstall -m 644 ${filespath}/servers.default ${destroot}${prefix}/etc/subversion
+ # install bash completion file
+ set completions_path ${destroot}${prefix}/share/bash-completion/completions
+ xinstall -d ${completions_path}
+ xinstall -m 644 ${worksrcpath}/tools/client-side/bash_completion ${completions_path}/subversion
+ }
-post-activate { if {![file exists ${prefix}/etc/subversion/servers]} {
- copy ${prefix}/etc/subversion/servers.default ${prefix}/etc/subversion/servers
- }
- }
+post-activate { if {![file exists ${prefix}/etc/subversion/servers]} {
+ copy ${prefix}/etc/subversion/servers.default ${prefix}/etc/subversion/servers
+ }
+ }
-variant mod_dav_svn description {Install the subversion apache module (mod_dav_svn)} {
- depends_build path:apache2/bin/apxs:apache2
- configure.args-append \
- --with-apxs=${prefix}/apache2/bin/apxs \
- --disable-mod-activation
- configure.args-delete --without-apxs
+variant mod_dav_svn description {Install the subversion apache module (mod_dav_svn)} {
+ depends_build path:apache2/bin/apxs:apache2
+ configure.args-append \
+ --with-apxs=${prefix}/apache2/bin/apxs \
+ --disable-mod-activation
+ configure.args-delete --without-apxs
- destroot.violate_mtree yes
- }
+ destroot.violate_mtree yes
+ }
-variant no_bdb description {Build without support for BerkeleyDB repositories} {
- depends_lib-delete port:db46
- configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
- configure.args-append --without-berkeley-db
- }
+variant no_bdb description {Build without support for BerkeleyDB repositories} {
+ depends_lib-delete port:db46
+ configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
+ configure.args-append --without-berkeley-db
+ }
-variant mac_os_x_server_mod_dav_svn description {Unsupported - attempt to build the subversion apache module with apple supplied apache2} {
- configure.args-append \
- --with-apxs=/opt/apache2/bin/apxs \
- --disable-mod-activation
- configure.args-delete --without-apxs
+variant mac_os_x_server_mod_dav_svn description {Unsupported - attempt to build the subversion apache module with apple supplied apache2} {
+ configure.args-append \
+ --with-apxs=/opt/apache2/bin/apxs \
+ --disable-mod-activation
+ configure.args-delete --without-apxs
- destroot.violate_mtree yes
+ destroot.violate_mtree yes
- post-install {
- ui_warn "This variant (+mac_os_x_server_mod_dav_svn) builds against the Apple-supplied apache2 in /opt/apache2 and thus may have problems that the normal variant (+mod_dav_svn) which builds against the macports supplied apache2 will not have."
- }
- }
+ post-install {
+ ui_warn "This variant (+mac_os_x_server_mod_dav_svn) builds against the Apple-supplied apache2 in /opt/apache2 and thus may have problems that the normal variant (+mod_dav_svn) which builds against the macports supplied apache2 will not have."
+ }
+ }
-variant tools description {Install some optional extra subversion tools} {
- post-destroot {
- xinstall -d -m 755 ${destroot}${prefix}/share/${name}
- delete ${worksrcpath}/tools/diff/
- delete ${worksrcpath}/tools/server-side/mod_dontdothat
- eval delete [glob ${worksrcpath}/tools/server-side/*{.o,.lo,.c}]
- delete ${worksrcpath}/tools/server-side/fsfs-stats
- delete ${worksrcpath}/tools/server-side/svn-populate-node-origins-index
- delete ${worksrcpath}/tools/server-side/svn-rep-sharing-stats
- delete ${worksrcpath}/tools/server-side/svnauthz-validate
- copy ${worksrcpath}/tools ${destroot}${prefix}/share/${name}/tools
- }
- }
+variant tools description {Install some optional extra subversion tools} {
+ post-destroot {
+ xinstall -d -m 755 ${destroot}${prefix}/share/${name}
+ delete ${worksrcpath}/tools/diff/
+ delete ${worksrcpath}/tools/server-side/mod_dontdothat
+ eval delete [glob ${worksrcpath}/tools/server-side/*{.o,.lo,.c}]
+ delete ${worksrcpath}/tools/server-side/fsfs-stats
+ delete ${worksrcpath}/tools/server-side/svn-populate-node-origins-index
+ delete ${worksrcpath}/tools/server-side/svn-rep-sharing-stats
+ delete ${worksrcpath}/tools/server-side/svnauthz-validate
+ copy ${worksrcpath}/tools ${destroot}${prefix}/share/${name}/tools
+ }
+ }
# see http://subversion.tigris.org/issues/show_bug.cgi?id=2464
-variant unicode_path description {Installs a hack to workaround Mac OS X unicode path issues} {
- patchfiles-append patch-osx_unicode_precomp.diff
- post-install {
- ui_warn "This variant (+unicode_path) implements a hack to deal with composed/decomposed unicode handling on Mac OS X which is different from linux and windows. It is an implementation of solution 1 from http://svn.collab.net/repos/svn/trunk/notes/unicode-composition-for-filenames which _WILL_ break some setups. Please be sure you understand what you are asking for when you install this variant."
- }
- }
+variant unicode_path description {Installs a hack to workaround Mac OS X unicode path issues} {
+ patchfiles-append patch-osx_unicode_precomp.diff
+ post-install {
+ ui_warn "This variant (+unicode_path) implements a hack to deal with composed/decomposed unicode handling on Mac OS X which is different from linux and windows. It is an implementation of solution 1 from http://svn.collab.net/repos/svn/trunk/notes/unicode-composition-for-filenames which _WILL_ break some setups. Please be sure you understand what you are asking for when you install this variant."
+ }
+ }
-variant disable_keychain description {Disables support for the Mac OS X Keychain} {
- configure.args-append --disable-keychain
- }
+variant disable_keychain description {Disables support for the Mac OS X Keychain} {
+ configure.args-append --disable-keychain
+ }
# CarbonCore/MacTypes.h: No such file or directory
-platform puredarwin { configure.args-append \
- --disable-keychain
- }
+platform puredarwin { configure.args-append \
+ --disable-keychain
+ }
-livecheck.type regex
-livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
-livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
+livecheck.type regex
+livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
+livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
Modified: branches/subversion-subports/dports/devel/subversion-javahlbindings/Portfile
===================================================================
--- branches/subversion-subports/dports/devel/subversion-javahlbindings/Portfile 2013-08-08 04:42:19 UTC (rev 109117)
+++ branches/subversion-subports/dports/devel/subversion-javahlbindings/Portfile 2013-08-08 05:32:17 UTC (rev 109118)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
PortSystem 1.0
@@ -2,123 +3,123 @@
-name subversion-javahlbindings
-version 1.8.1
-revision 2
-categories devel java
-platforms darwin
-maintainers geeklair.net:dluke blair
-description Java (javahl) bindings for the subversion version control system (svn)
-license Apache-2
+name subversion-javahlbindings
+version 1.8.1
+revision 2
+categories devel java
+platforms darwin
+maintainers geeklair.net:dluke blair
+description Java (javahl) bindings for the subversion version control system (svn)
+license Apache-2
-long_description Subversion (svn) is a version control system designed to be \
- as similar to cvs(1) as possible, while fixing many \
- outstanding problems with cvs(1). The java bindings \
- provide access to subversion API from java.
+long_description Subversion (svn) is a version control system designed to be \
+ as similar to cvs(1) as possible, while fixing many \
+ outstanding problems with cvs(1). The java bindings \
+ provide access to subversion API from java.
-homepage http://subversion.apache.org/
-master_sites apache:subversion
-use_bzip2 yes
-checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
- sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
- rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
+homepage http://subversion.apache.org/
+master_sites apache:subversion
+use_bzip2 yes
+checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
+ sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
+ rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
-distname subversion-${version}
-dist_subdir subversion
+distname subversion-${version}
+dist_subdir subversion
-depends_build port:junit
+depends_build port:junit
-depends_lib port:expat \
- port:apr port:apr-util \
- port:db46 port:subversion \
- port:sqlite3 port:gettext \
- port:libiconv port:serf1 \
- port:cyrus-sasl2 \
- port:file port:libcomerr
+depends_lib port:expat \
+ port:apr port:apr-util \
+ port:db46 port:subversion \
+ port:sqlite3 port:gettext \
+ port:libiconv port:serf1 \
+ port:cyrus-sasl2 \
+ port:file port:libcomerr
-configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
- --with-apr=${prefix}/bin/apr-1-config \
- --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
- --mandir=\\\${prefix}/share/man \
- --with-serf=${prefix} \
- --with-sasl=${prefix} \
- --with-libmagic=${prefix} \
- --without-gnome-keyring \
- --enable-javahl --without-jikes \
- --with-junit=${prefix}/share/java/junit.jar
+configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
+ --with-apr=${prefix}/bin/apr-1-config \
+ --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
+ --mandir=\\\${prefix}/share/man \
+ --with-serf=${prefix} \
+ --with-sasl=${prefix} \
+ --with-libmagic=${prefix} \
+ --without-gnome-keyring \
+ --enable-javahl --without-jikes \
+ --with-junit=${prefix}/share/java/junit.jar
-build.target javahl
-destroot.target install-javahl
+build.target javahl
+destroot.target install-javahl
-use_parallel_build no
+use_parallel_build no
-test.run yes
-test.target check-javahl
+test.run yes
+test.target check-javahl
-destroot.violate_mtree yes
+destroot.violate_mtree yes
-patchfiles patch-configure.diff
+patchfiles patch-configure.diff
-pre-test { reinplace "s|-Djava.library.path=:\$(libdir)|-Djava.library.path=:${worksrcpath}/subversion/bindings/javahl/native/.libs|g" \
- ${worksrcpath}/Makefile
+pre-test { reinplace "s|-Djava.library.path=:\$(libdir)|-Djava.library.path=:${worksrcpath}/subversion/bindings/javahl/native/.libs|g" \
+ ${worksrcpath}/Makefile
- system "ln -sf ${worksrcpath}/subversion/bindings/javahl/native/.libs/libsvnjavahl-1.dylib ${worksrcpath}/subversion/bindings/javahl/native/.libs/libsvnjavahl.jnilib"
- }
+ system "ln -sf ${worksrcpath}/subversion/bindings/javahl/native/.libs/libsvnjavahl-1.dylib ${worksrcpath}/subversion/bindings/javahl/native/.libs/libsvnjavahl.jnilib"
+ }
-pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
- ${worksrcpath}/configure
- reinplace "s|\\(LINK_JAVAHL_CXX.*\\)-rpath|\\1-dynamiclib -rpath|g" \
- ${worksrcpath}/Makefile.in
- reinplace "s|@@DESTROOT@@|${destroot}|g" \
- ${worksrcpath}/configure
- }
+pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
+ ${worksrcpath}/configure
+ reinplace "s|\\(LINK_JAVAHL_CXX.*\\)-rpath|\\1-dynamiclib -rpath|g" \
+ ${worksrcpath}/Makefile.in
+ reinplace "s|@@DESTROOT@@|${destroot}|g" \
+ ${worksrcpath}/configure
+ }
-post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
- ${worksrcpath}/libtool
- }
+post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
+ ${worksrcpath}/libtool
+ }
-platform darwin 10 { pre-fetch {
- if {![file isfile "/System/Library/Frameworks/JavaVM.framework/Headers/jni.h"]} {
- return -code error "\n********************\n${name} requires the Java for Mac OS X Developer Package from Apple.\nPlease download and install this package:\nhttps://connect.apple.com/cgi-bin/WebObjects/MemberSite.woa/wa/getSoftware?bundleID=20719\n********************"
- }
- }
- }
+platform darwin 10 { pre-fetch {
+ if {![file isfile "/System/Library/Frameworks/JavaVM.framework/Headers/jni.h"]} {
+ return -code error "\n********************\n${name} requires the Java for Mac OS X Developer Package from Apple.\nPlease download and install this package:\nhttps://connect.apple.com/cgi-bin/WebObjects/MemberSite.woa/wa/getSoftware?bundleID=20719\n********************"
+ }
+ }
+ }
-platform darwin 9 { pre-fetch {
- if {![file isfile "/System/Library/Frameworks/JavaVM.framework/Headers/jni.h"]} {
+platform darwin 9 { pre-fetch {
+ if {![file isfile "/System/Library/Frameworks/JavaVM.framework/Headers/jni.h"]} {
return -code error "\n********************\n${name} requires the Java for Mac OS X Developer Package from Apple.\nPlease download and install this package:\nhttps://connect.apple.com/cgi-bin/WebObjects/MemberSite.woa/wa/getSoftware?bundleID=20720\n********************"
- }
- }
- }
+ }
+ }
+ }
variant no_bdb description {Build without support for BerkeleyDB repositories} {
- depends_lib-delete port:db46
- configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
- configure.args-append --without-berkeley-db
- }
+ depends_lib-delete port:db46
+ configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
+ configure.args-append --without-berkeley-db
+ }
post-destroot {
- file mkdir ${destroot}/Library/Java/Extensions
- system "ln -sf ${prefix}/lib/libsvnjavahl-1.dylib ${destroot}/Library/Java/Extensions/libsvnjavahl.jnilib"
- file mkdir ${destroot}${prefix}/share/java
- system "ln -sf ${prefix}/lib/svn-javahl/svn-javahl.jar ${destroot}${prefix}/share/java/svn-javahl.jar"
- }
+ file mkdir ${destroot}/Library/Java/Extensions
+ system "ln -sf ${prefix}/lib/libsvnjavahl-1.dylib ${destroot}/Library/Java/Extensions/libsvnjavahl.jnilib"
+ file mkdir ${destroot}${prefix}/share/java
+ system "ln -sf ${prefix}/lib/svn-javahl/svn-javahl.jar ${destroot}${prefix}/share/java/svn-javahl.jar"
+ }
# CarbonCore/MacTypes.h: No such file or directory
-platform puredarwin { configure.args-append \
- --disable-keychain
- }
+platform puredarwin { configure.args-append \
+ --disable-keychain
+ }
-pre-activate {
- #- this port used to create a symlink directly in ${prefix} which was fixed in 1.8.1_1
- #- we need to remove this symlink fromo ${prefix} though, so upgrades work
- #- this can eventually be removed, origionally added 2013-07-25
- set badfile ${prefix}/lib/libsvnjavahl-1.jnilib
- if {[file exists ${badfile}] && [registry_file_registered ${badfile}] == "0"} {
- if {[catch {delete ${badfile}}]} {
- ui_warn "Cannot delete ${badfile}; please remove it manually"
- }
- }
-
- }
+pre-activate {
+ #- this port used to create a symlink directly in ${prefix} which was fixed in 1.8.1_1
+ #- we need to remove this symlink fromo ${prefix} though, so upgrades work
+ #- this can eventually be removed, origionally added 2013-07-25
+ set badfile ${prefix}/lib/libsvnjavahl-1.jnilib
+ if {[file exists ${badfile}] && [registry_file_registered ${badfile}] == "0"} {
+ if {[catch {delete ${badfile}}]} {
+ ui_warn "Cannot delete ${badfile}; please remove it manually"
+ }
+ }
+
+ }
-livecheck.type regex
-livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
-livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
+livecheck.type regex
+livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
+livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
Modified: branches/subversion-subports/dports/devel/subversion-perlbindings/Portfile
===================================================================
--- branches/subversion-subports/dports/devel/subversion-perlbindings/Portfile 2013-08-08 04:42:19 UTC (rev 109117)
+++ branches/subversion-subports/dports/devel/subversion-perlbindings/Portfile 2013-08-08 05:32:17 UTC (rev 109118)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
PortSystem 1.0
@@ -2,17 +3,17 @@
-name subversion-perlbindings
-version 1.8.1
-revision 1
-categories devel perl
-platforms darwin
-maintainers geeklair.net:dluke blair
-description Perl bindings for the subversion version control system (svn)
-license Apache-2
+name subversion-perlbindings
+version 1.8.1
+revision 1
+categories devel perl
+platforms darwin
+maintainers geeklair.net:dluke blair
+description Perl bindings for the subversion version control system (svn)
+license Apache-2
-long_description Subversion (svn) is a version control system designed to be \
- as similar to cvs(1) as possible, while fixing many \
- outstanding problems with cvs(1). The perl bindings \
- provide access to subversion API from perl.
+long_description Subversion (svn) is a version control system designed to be \
+ as similar to cvs(1) as possible, while fixing many \
+ outstanding problems with cvs(1). The perl bindings \
+ provide access to subversion API from perl.
-homepage http://subversion.apache.org/
+homepage http://subversion.apache.org/
@@ -25,7 +26,7 @@
subport ${name}-${branch} {
set perl5.branch $branch
- foreach c_perl ${other_perls} {
+ foreach c_perl ${other_perls} {
conflicts-append ${name}-${c_perl}
}
}
@@ -41,67 +42,67 @@
use_configure no
build {}
destroot {
- xinstall -d ${destroot}${prefix}/share/doc/${name}
+ xinstall -d ${destroot}${prefix}/share/doc/${name}
system "echo $name is a stub port > ${destroot}${prefix}/share/doc/${name}/README"
}
- livecheck.type regex
- livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
- livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
+ livecheck.type regex
+ livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
+ livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
} else {
-master_sites apache:subversion
-use_bzip2 yes
-checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
- sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
- rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
+master_sites apache:subversion
+use_bzip2 yes
+checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
+ sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
+ rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
-distname subversion-${version}
-dist_subdir subversion
+distname subversion-${version}
+dist_subdir subversion
-test.run yes
-test.target check-swig-pl
+test.run yes
+test.target check-swig-pl
-use_parallel_build no
+use_parallel_build no
-depends_lib port:expat \
- port:apr port:apr-util \
- port:db46 port:subversion \
- port:perl${perl5.branch} \
- port:gettext port:libiconv \
- port:serf1 port:cyrus-sasl2 \
- port:sqlite3 port:file \
- port:libcomerr
+depends_lib port:expat \
+ port:apr port:apr-util \
+ port:db46 port:subversion \
+ port:perl${perl5.branch} \
+ port:gettext port:libiconv \
+ port:serf1 port:cyrus-sasl2 \
+ port:sqlite3 port:file \
+ port:libcomerr
-configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
- --with-apr=${prefix}/bin/apr-1-config \
- --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
- --mandir=\\\${prefix}/share/man \
- --with-serf=${prefix} \
- --with-sasl=${prefix} \
- --with-libmagic=${prefix} \
- --without-gnome-keyring
+configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
+ --with-apr=${prefix}/bin/apr-1-config \
+ --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
+ --mandir=\\\${prefix}/share/man \
+ --with-serf=${prefix} \
+ --with-sasl=${prefix} \
+ --with-libmagic=${prefix} \
+ --without-gnome-keyring
-configure.env ac_cv_path_PERL=${prefix}/bin/perl${perl5.branch}
+configure.env ac_cv_path_PERL=${prefix}/bin/perl${perl5.branch}
-patchfiles patch-swig-perl-native-core.c.diff
+patchfiles patch-swig-perl-native-core.c.diff
-build.target swig-pl
-destroot.target install-swig-pl-lib DESTDIR=${destroot} && \
- cd "${worksrcpath}/subversion/bindings/swig/perl/native" &&\
- make pure_install
+build.target swig-pl
+destroot.target install-swig-pl-lib DESTDIR=${destroot} && \
+ cd "${worksrcpath}/subversion/bindings/swig/perl/native" &&\
+ make pure_install
-destroot.args INSTALLDIRS=vendor
+destroot.args INSTALLDIRS=vendor
-pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
- ${worksrcpath}/configure
- }
+pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
+ ${worksrcpath}/configure
+ }
-post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
- ${worksrcpath}/libtool
- }
+post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
+ ${worksrcpath}/libtool
+ }
variant no_bdb description {Build without support for BerkeleyDB repositories} {
- depends_lib-delete port:db46
+ depends_lib-delete port:db46
configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
configure.args-append --without-berkeley-db
}
@@ -114,9 +115,9 @@
}
# CarbonCore/MacTypes.h: No such file or directory
-platform puredarwin { configure.args-append \
- --disable-keychain
- }
+platform puredarwin { configure.args-append \
+ --disable-keychain
+ }
livecheck.type none
}
Modified: branches/subversion-subports/dports/devel/subversion-python24bindings/Portfile
===================================================================
--- branches/subversion-subports/dports/devel/subversion-python24bindings/Portfile 2013-08-08 04:42:19 UTC (rev 109117)
+++ branches/subversion-subports/dports/devel/subversion-python24bindings/Portfile 2013-08-08 05:32:17 UTC (rev 109118)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
PortSystem 1.0
@@ -2,106 +3,106 @@
-name subversion-python24bindings
-version 1.8.1
-revision 1
-categories devel python
-platforms darwin
-maintainers openmaintainer blair
-description Python bindings for the subversion version control system (svn)
-license Apache-2
+name subversion-python24bindings
+version 1.8.1
+revision 1
+categories devel python
+platforms darwin
+maintainers openmaintainer blair
+description Python bindings for the subversion version control system (svn)
+license Apache-2
-long_description Subversion (svn) is a version control system designed to be \
- as similar to cvs(1) as possible, while fixing many \
- outstanding problems with cvs(1). The python bindings \
- provide access to subversion API from python.
+long_description Subversion (svn) is a version control system designed to be \
+ as similar to cvs(1) as possible, while fixing many \
+ outstanding problems with cvs(1). The python bindings \
+ provide access to subversion API from python.
-homepage http://subversion.apache.org/
-master_sites apache:subversion
-use_bzip2 yes
-checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
- sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
- rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
+homepage http://subversion.apache.org/
+master_sites apache:subversion
+use_bzip2 yes
+checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
+ sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
+ rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
-distname subversion-${version}
-dist_subdir subversion
+distname subversion-${version}
+dist_subdir subversion
-depends_lib port:expat \
- port:apr port:apr-util \
- port:db46 port:subversion \
- port:python24 \
- port:py24-bsddb port:sqlite3 \
- port:gettext port:libiconv \
- port:serf1 port:cyrus-sasl2 \
- port:file port:libcomerr
+depends_lib port:expat \
+ port:apr port:apr-util \
+ port:db46 port:subversion \
+ port:python24 \
+ port:py24-bsddb port:sqlite3 \
+ port:gettext port:libiconv \
+ port:serf1 port:cyrus-sasl2 \
+ port:file port:libcomerr
-patchfiles patch-swig-python-core.diff
+patchfiles patch-swig-python-core.diff
post-patch {
- system "cd ${worksrcpath}; find build* Makefile.in subversion/bindings/swig/python -type f -print0 | xargs -0 perl -w -p -i -e 's/libsvn_swig_py/libsvn_swig_py24/g'"
- file rename \
- ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py \
- ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py24
+ system "cd ${worksrcpath}; find build* Makefile.in subversion/bindings/swig/python -type f -print0 | xargs -0 perl -w -p -i -e 's/libsvn_swig_py/libsvn_swig_py24/g'"
+ file rename \
+ ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py \
+ ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py24
}
-configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
- --with-apr=${prefix}/bin/apr-1-config \
- --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
- --mandir=\\\${prefix}/share/man \
- --with-serf=${prefix} \
- --with-sasl=${prefix} \
- --with-libmagic=${prefix} \
- --without-gnome-keyring
+configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
+ --with-apr=${prefix}/bin/apr-1-config \
+ --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
+ --mandir=\\\${prefix}/share/man \
+ --with-serf=${prefix} \
+ --with-sasl=${prefix} \
+ --with-libmagic=${prefix} \
+ --without-gnome-keyring
-configure.env ac_cv_path_PYTHON=${prefix}/bin/python2.4 \
- ac_cv_python_includes=-I${prefix}/include/python2.4 \
- ac_cv_python_link="${configure.cc} -L${prefix}/lib -bundle -undefined dynamic_lookup" \
- ac_cv_python_libs="-L${prefix}/lib -bundle -undefined dynamic_lookup" \
- ac_cv_python_compile=${configure.cc}
+configure.env ac_cv_path_PYTHON=${prefix}/bin/python2.4 \
+ ac_cv_python_includes=-I${prefix}/include/python2.4 \
+ ac_cv_python_link="${configure.cc} -L${prefix}/lib -bundle -undefined dynamic_lookup" \
+ ac_cv_python_libs="-L${prefix}/lib -bundle -undefined dynamic_lookup" \
+ ac_cv_python_compile=${configure.cc}
use_parallel_build yes
-build.target swig-py
-destroot.target install-swig-py DESTDIR=${destroot}
+build.target swig-py
+destroot.target install-swig-py DESTDIR=${destroot}
-test.run yes
-test.target check-swig-py
+test.run yes
+test.target check-swig-py
pre-test {
- set x {}
- fs-traverse dir ${worksrcpath}/subversion {
- if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
- lappend x ${dir}
- continue
- }
- }
- test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
- }
+ set x {}
+ fs-traverse dir ${worksrcpath}/subversion {
+ if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
+ lappend x ${dir}
+ continue
+ }
+ }
+ test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
+ }
-pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
- ${worksrcpath}/configure
- }
+pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
+ ${worksrcpath}/configure
+ }
-post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
- ${worksrcpath}/libtool
- }
+post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
+ ${worksrcpath}/libtool
+ }
variant no_bdb description {Build without support for BerkeleyDB repositories} {
- depends_lib-delete port:db46 port:py-bsddb
- configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
- configure.args-append --without-berkeley-db
- }
+ depends_lib-delete port:db46 port:py-bsddb
+ configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
+ configure.args-append --without-berkeley-db
+ }
post-destroot {
- set PYTHON_PATH ${prefix}/lib/python2.4
+ set PYTHON_PATH ${prefix}/lib/python2.4
- xinstall -m 755 -d ${destroot}${PYTHON_PATH}/site-packages
- xinstall -m 755 ${portpath}/${filesdir}/svn-python.pth \
- ${destroot}${PYTHON_PATH}/site-packages
- reinplace "s|@PREFIX@|${prefix}|g" \
- ${destroot}${PYTHON_PATH}/site-packages/svn-python.pth
+ xinstall -m 755 -d ${destroot}${PYTHON_PATH}/site-packages
+ xinstall -m 755 ${portpath}/${filesdir}/svn-python.pth \
+ ${destroot}${PYTHON_PATH}/site-packages
+ reinplace "s|@PREFIX@|${prefix}|g" \
+ ${destroot}${PYTHON_PATH}/site-packages/svn-python.pth
- file rename "${destroot}${prefix}/lib/svn-python" \
- "${destroot}${prefix}/lib/svn-python2.4"
- }
+ file rename "${destroot}${prefix}/lib/svn-python" \
+ "${destroot}${prefix}/lib/svn-python2.4"
+ }
-livecheck.type regex
-livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
-livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
+livecheck.type regex
+livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
+livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
Modified: branches/subversion-subports/dports/devel/subversion-python25bindings/Portfile
===================================================================
--- branches/subversion-subports/dports/devel/subversion-python25bindings/Portfile 2013-08-08 04:42:19 UTC (rev 109117)
+++ branches/subversion-subports/dports/devel/subversion-python25bindings/Portfile 2013-08-08 05:32:17 UTC (rev 109118)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
PortSystem 1.0
@@ -2,106 +3,106 @@
-name subversion-python25bindings
-version 1.8.1
-revision 1
-categories devel python
-platforms darwin
-maintainers openmaintainer blair
-description Python bindings for the subversion version control system (svn)
-license Apache-2
+name subversion-python25bindings
+version 1.8.1
+revision 1
+categories devel python
+platforms darwin
+maintainers openmaintainer blair
+description Python bindings for the subversion version control system (svn)
+license Apache-2
-long_description Subversion (svn) is a version control system designed to be \
- as similar to cvs(1) as possible, while fixing many \
- outstanding problems with cvs(1). The python bindings \
- provide access to subversion API from python.
+long_description Subversion (svn) is a version control system designed to be \
+ as similar to cvs(1) as possible, while fixing many \
+ outstanding problems with cvs(1). The python bindings \
+ provide access to subversion API from python.
-homepage http://subversion.apache.org/
-master_sites apache:subversion
-use_bzip2 yes
-checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
- sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
- rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
+homepage http://subversion.apache.org/
+master_sites apache:subversion
+use_bzip2 yes
+checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
+ sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
+ rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
-distname subversion-${version}
-dist_subdir subversion
+distname subversion-${version}
+dist_subdir subversion
-depends_lib port:expat \
- port:apr port:apr-util \
- port:db46 port:subversion \
- port:python25 \
- port:sqlite3 \
- port:gettext port:libiconv \
- port:serf1 port:cyrus-sasl2 \
- port:file port:libcomerr
+depends_lib port:expat \
+ port:apr port:apr-util \
+ port:db46 port:subversion \
+ port:python25 \
+ port:sqlite3 \
+ port:gettext port:libiconv \
+ port:serf1 port:cyrus-sasl2 \
+ port:file port:libcomerr
-patchfiles patch-swig-python-core.diff
+patchfiles patch-swig-python-core.diff
post-patch {
- system "cd ${worksrcpath}; find build* Makefile.in subversion/bindings/swig/python -type f -print0 | xargs -0 perl -w -p -i -e 's/libsvn_swig_py/libsvn_swig_py25/g'"
- file rename \
- ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py \
- ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py25
+ system "cd ${worksrcpath}; find build* Makefile.in subversion/bindings/swig/python -type f -print0 | xargs -0 perl -w -p -i -e 's/libsvn_swig_py/libsvn_swig_py25/g'"
+ file rename \
+ ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py \
+ ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py25
}
-configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
- --with-apr=${prefix}/bin/apr-1-config \
- --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
- --mandir=\\\${prefix}/share/man \
- --with-serf=${prefix} \
- --with-sasl=${prefix} \
- --with-libmagic=${prefix} \
- --without-gnome-keyring
+configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
+ --with-apr=${prefix}/bin/apr-1-config \
+ --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
+ --mandir=\\\${prefix}/share/man \
+ --with-serf=${prefix} \
+ --with-sasl=${prefix} \
+ --with-libmagic=${prefix} \
+ --without-gnome-keyring
-configure.env ac_cv_path_PYTHON=${prefix}/bin/python2.5 \
- ac_cv_python_includes=-I${prefix}/include/python2.5 \
- ac_cv_python_link="${configure.cc} -L${prefix}/lib -bundle -undefined dynamic_lookup -lpython2.5" \
- ac_cv_python_libs="-L${prefix}/lib -bundle -undefined dynamic_lookup -lpython2.5" \
- ac_cv_python_compile=${configure.cc}
+configure.env ac_cv_path_PYTHON=${prefix}/bin/python2.5 \
+ ac_cv_python_includes=-I${prefix}/include/python2.5 \
+ ac_cv_python_link="${configure.cc} -L${prefix}/lib -bundle -undefined dynamic_lookup -lpython2.5" \
+ ac_cv_python_libs="-L${prefix}/lib -bundle -undefined dynamic_lookup -lpython2.5" \
+ ac_cv_python_compile=${configure.cc}
use_parallel_build yes
-build.target swig-py
-destroot.target install-swig-py DESTDIR=${destroot}
+build.target swig-py
+destroot.target install-swig-py DESTDIR=${destroot}
-test.run yes
-test.target check-swig-py
+test.run yes
+test.target check-swig-py
pre-test {
- set x {}
- fs-traverse dir ${worksrcpath}/subversion {
- if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
- lappend x ${dir}
- continue
- }
- }
- test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
- }
+ set x {}
+ fs-traverse dir ${worksrcpath}/subversion {
+ if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
+ lappend x ${dir}
+ continue
+ }
+ }
+ test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
+ }
-pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
- ${worksrcpath}/configure
- }
+pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
+ ${worksrcpath}/configure
+ }
-post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
- ${worksrcpath}/libtool
- }
+post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
+ ${worksrcpath}/libtool
+ }
variant no_bdb description {Build without support for BerkeleyDB repositories} {
- depends_lib-delete port:db46
- configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
- configure.args-append --without-berkeley-db
- }
+ depends_lib-delete port:db46
+ configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
+ configure.args-append --without-berkeley-db
+ }
post-destroot {
- set PYTHON_PATH ${prefix}/lib/python2.5
+ set PYTHON_PATH ${prefix}/lib/python2.5
- xinstall -m 755 -d ${destroot}${PYTHON_PATH}/site-packages
- xinstall -m 755 ${portpath}/${filesdir}/svn-python.pth \
- ${destroot}${PYTHON_PATH}/site-packages
- reinplace "s|@PREFIX@|${prefix}|g" \
- ${destroot}${PYTHON_PATH}/site-packages/svn-python.pth
+ xinstall -m 755 -d ${destroot}${PYTHON_PATH}/site-packages
+ xinstall -m 755 ${portpath}/${filesdir}/svn-python.pth \
+ ${destroot}${PYTHON_PATH}/site-packages
+ reinplace "s|@PREFIX@|${prefix}|g" \
+ ${destroot}${PYTHON_PATH}/site-packages/svn-python.pth
- file rename "${destroot}${prefix}/lib/svn-python" \
- "${destroot}${prefix}/lib/svn-python2.5"
- }
+ file rename "${destroot}${prefix}/lib/svn-python" \
+ "${destroot}${prefix}/lib/svn-python2.5"
+ }
-livecheck.type regex
-livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
-livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
+livecheck.type regex
+livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
+livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
Modified: branches/subversion-subports/dports/devel/subversion-python26bindings/Portfile
===================================================================
--- branches/subversion-subports/dports/devel/subversion-python26bindings/Portfile 2013-08-08 04:42:19 UTC (rev 109117)
+++ branches/subversion-subports/dports/devel/subversion-python26bindings/Portfile 2013-08-08 05:32:17 UTC (rev 109118)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
PortSystem 1.0
@@ -2,111 +3,111 @@
-name subversion-python26bindings
-version 1.8.1
-revision 1
-categories devel python
-platforms darwin
-maintainers geeklair.net:dluke blair
-description Python bindings for the subversion version control system (svn)
-license Apache-2
+name subversion-python26bindings
+version 1.8.1
+revision 1
+categories devel python
+platforms darwin
+maintainers geeklair.net:dluke blair
+description Python bindings for the subversion version control system (svn)
+license Apache-2
-long_description Subversion (svn) is a version control system designed to be \
- as similar to cvs(1) as possible, while fixing many \
- outstanding problems with cvs(1). The python bindings \
- provide access to subversion API from python.
+long_description Subversion (svn) is a version control system designed to be \
+ as similar to cvs(1) as possible, while fixing many \
+ outstanding problems with cvs(1). The python bindings \
+ provide access to subversion API from python.
-homepage http://subversion.apache.org/
-master_sites apache:subversion
-use_bzip2 yes
-checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
- sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
- rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
+homepage http://subversion.apache.org/
+master_sites apache:subversion
+use_bzip2 yes
+checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
+ sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
+ rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
-distname subversion-${version}
-dist_subdir subversion
+distname subversion-${version}
+dist_subdir subversion
-depends_lib port:expat \
- port:apr port:apr-util \
- port:db46 port:subversion \
- port:python26 \
- port:sqlite3 \
- port:gettext port:libiconv \
- port:serf1 port:cyrus-sasl2 \
- port:file port:libcomerr
+depends_lib port:expat \
+ port:apr port:apr-util \
+ port:db46 port:subversion \
+ port:python26 \
+ port:sqlite3 \
+ port:gettext port:libiconv \
+ port:serf1 port:cyrus-sasl2 \
+ port:file port:libcomerr
-patchfiles patch-swig-python-core.diff
+patchfiles patch-swig-python-core.diff
post-patch {
- system "cd ${worksrcpath}; find build* Makefile.in subversion/bindings/swig/python -type f -print0 | xargs -0 perl -w -p -i -e 's/libsvn_swig_py/libsvn_swig_py26/g'"
- file rename \
- ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py \
- ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py26
+ system "cd ${worksrcpath}; find build* Makefile.in subversion/bindings/swig/python -type f -print0 | xargs -0 perl -w -p -i -e 's/libsvn_swig_py/libsvn_swig_py26/g'"
+ file rename \
+ ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py \
+ ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py26
}
-configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
- --with-apr=${prefix}/bin/apr-1-config \
- --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
- --mandir=\\\${prefix}/share/man \
- --with-serf=${prefix} \
- --with-sasl=${prefix} \
- --with-libmagic=${prefix} \
- --without-gnome-keyring
+configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
+ --with-apr=${prefix}/bin/apr-1-config \
+ --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
+ --mandir=\\\${prefix}/share/man \
+ --with-serf=${prefix} \
+ --with-sasl=${prefix} \
+ --with-libmagic=${prefix} \
+ --without-gnome-keyring
-configure.env ac_cv_path_PYTHON=${prefix}/bin/python2.6 \
- ac_cv_python_includes=-I${frameworks_dir}/Python.framework/Versions/2.6/include/python2.6 \
- ac_cv_python_link="${configure.cc} -L${prefix}/lib -bundle -undefined dynamic_lookup ${frameworks_dir}/Python.framework/Versions/2.6/Python" \
- ac_cv_python_libs="-L${prefix}/lib -bundle -undefined dynamic_lookup ${frameworks_dir}/Python.framework/Versions/2.6/Python" \
- ac_cv_python_compile=${configure.cc}
+configure.env ac_cv_path_PYTHON=${prefix}/bin/python2.6 \
+ ac_cv_python_includes=-I${frameworks_dir}/Python.framework/Versions/2.6/include/python2.6 \
+ ac_cv_python_link="${configure.cc} -L${prefix}/lib -bundle -undefined dynamic_lookup ${frameworks_dir}/Python.framework/Versions/2.6/Python" \
+ ac_cv_python_libs="-L${prefix}/lib -bundle -undefined dynamic_lookup ${frameworks_dir}/Python.framework/Versions/2.6/Python" \
+ ac_cv_python_compile=${configure.cc}
use_parallel_build yes
-build.target swig-py
-destroot.target install-swig-py DESTDIR=${destroot}
+build.target swig-py
+destroot.target install-swig-py DESTDIR=${destroot}
-test.run yes
-test.target check-swig-py
+test.run yes
+test.target check-swig-py
pre-test {
- set x {}
- fs-traverse dir ${worksrcpath}/subversion {
- if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
- lappend x ${dir}
- continue
- }
- }
- test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
- }
+ set x {}
+ fs-traverse dir ${worksrcpath}/subversion {
+ if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
+ lappend x ${dir}
+ continue
+ }
+ }
+ test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
+ }
-pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
- ${worksrcpath}/configure
- }
+pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
+ ${worksrcpath}/configure
+ }
-post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
- ${worksrcpath}/libtool
- }
+post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
+ ${worksrcpath}/libtool
+ }
variant no_bdb description {Build without support for BerkeleyDB repositories} {
- depends_lib-delete port:db46
- configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
- configure.args-append --without-berkeley-db
- }
+ depends_lib-delete port:db46
+ configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
+ configure.args-append --without-berkeley-db
+ }
post-destroot {
- set PYTHON_PATH ${frameworks_dir}/Python.framework/Versions/2.6/lib/python2.6
+ set PYTHON_PATH ${frameworks_dir}/Python.framework/Versions/2.6/lib/python2.6
- xinstall -m 755 -d ${destroot}${PYTHON_PATH}/site-packages
- xinstall -m 755 ${portpath}/${filesdir}/svn-python.pth \
- ${destroot}${PYTHON_PATH}/site-packages
- reinplace "s|@PREFIX@|${prefix}|g" \
- ${destroot}${PYTHON_PATH}/site-packages/svn-python.pth
+ xinstall -m 755 -d ${destroot}${PYTHON_PATH}/site-packages
+ xinstall -m 755 ${portpath}/${filesdir}/svn-python.pth \
+ ${destroot}${PYTHON_PATH}/site-packages
+ reinplace "s|@PREFIX@|${prefix}|g" \
+ ${destroot}${PYTHON_PATH}/site-packages/svn-python.pth
- file rename "${destroot}${prefix}/lib/svn-python" \
- "${destroot}${prefix}/lib/svn-python2.6"
- }
+ file rename "${destroot}${prefix}/lib/svn-python" \
+ "${destroot}${prefix}/lib/svn-python2.6"
+ }
# CarbonCore/MacTypes.h: No such file or directory
-platform puredarwin { configure.args-append \
- --disable-keychain
- }
+platform puredarwin { configure.args-append \
+ --disable-keychain
+ }
-livecheck.type regex
-livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
-livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
+livecheck.type regex
+livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
+livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
Modified: branches/subversion-subports/dports/devel/subversion-python27bindings/Portfile
===================================================================
--- branches/subversion-subports/dports/devel/subversion-python27bindings/Portfile 2013-08-08 04:42:19 UTC (rev 109117)
+++ branches/subversion-subports/dports/devel/subversion-python27bindings/Portfile 2013-08-08 05:32:17 UTC (rev 109118)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
PortSystem 1.0
@@ -2,111 +3,111 @@
-name subversion-python27bindings
-version 1.8.1
-revision 1
-categories devel python
-platforms darwin
-maintainers geeklair.net:dluke blair
-description Python bindings for the subversion version control system (svn)
-license Apache-2
+name subversion-python27bindings
+version 1.8.1
+revision 1
+categories devel python
+platforms darwin
+maintainers geeklair.net:dluke blair
+description Python bindings for the subversion version control system (svn)
+license Apache-2
-long_description Subversion (svn) is a version control system designed to be \
- as similar to cvs(1) as possible, while fixing many \
- outstanding problems with cvs(1). The python bindings \
- provide access to subversion API from python.
+long_description Subversion (svn) is a version control system designed to be \
+ as similar to cvs(1) as possible, while fixing many \
+ outstanding problems with cvs(1). The python bindings \
+ provide access to subversion API from python.
-homepage http://subversion.apache.org/
-master_sites apache:subversion
-use_bzip2 yes
-checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
- sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
- rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
+homepage http://subversion.apache.org/
+master_sites apache:subversion
+use_bzip2 yes
+checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
+ sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
+ rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
-distname subversion-${version}
-dist_subdir subversion
+distname subversion-${version}
+dist_subdir subversion
-depends_lib port:expat \
- port:apr port:apr-util \
- port:db46 port:subversion \
- port:python27 \
- port:sqlite3 \
- port:gettext port:libiconv \
- port:serf1 port:cyrus-sasl2 \
- port:file port:libcomerr
+depends_lib port:expat \
+ port:apr port:apr-util \
+ port:db46 port:subversion \
+ port:python27 \
+ port:sqlite3 \
+ port:gettext port:libiconv \
+ port:serf1 port:cyrus-sasl2 \
+ port:file port:libcomerr
-patchfiles patch-swig-python-core.diff
+patchfiles patch-swig-python-core.diff
post-patch {
- system "cd ${worksrcpath}; find build* Makefile.in subversion/bindings/swig/python -type f -print0 | xargs -0 perl -w -p -i -e 's/libsvn_swig_py/libsvn_swig_py27/g'"
- file rename \
- ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py \
- ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py27
+ system "cd ${worksrcpath}; find build* Makefile.in subversion/bindings/swig/python -type f -print0 | xargs -0 perl -w -p -i -e 's/libsvn_swig_py/libsvn_swig_py27/g'"
+ file rename \
+ ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py \
+ ${worksrcpath}/subversion/bindings/swig/python/libsvn_swig_py27
}
-configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
- --with-apr=${prefix}/bin/apr-1-config \
- --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
- --mandir=\\\${prefix}/share/man \
- --with-serf=${prefix} \
- --with-sasl=${prefix} \
- --with-libmagic=${prefix} \
- --without-gnome-keyring
+configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
+ --with-apr=${prefix}/bin/apr-1-config \
+ --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
+ --mandir=\\\${prefix}/share/man \
+ --with-serf=${prefix} \
+ --with-sasl=${prefix} \
+ --with-libmagic=${prefix} \
+ --without-gnome-keyring
-configure.env ac_cv_path_PYTHON=${prefix}/bin/python2.7 \
- ac_cv_python_includes=-I${frameworks_dir}/Python.framework/Versions/2.7/include/python2.7 \
- ac_cv_python_link="${configure.cc} -L${prefix}/lib -bundle -undefined dynamic_lookup ${frameworks_dir}/Python.framework/Versions/2.7/Python" \
- ac_cv_python_libs="-L${prefix}/lib -bundle -undefined dynamic_lookup ${frameworks_dir}/Python.framework/Versions/2.7/Python" \
- ac_cv_python_compile=${configure.cc}
+configure.env ac_cv_path_PYTHON=${prefix}/bin/python2.7 \
+ ac_cv_python_includes=-I${frameworks_dir}/Python.framework/Versions/2.7/include/python2.7 \
+ ac_cv_python_link="${configure.cc} -L${prefix}/lib -bundle -undefined dynamic_lookup ${frameworks_dir}/Python.framework/Versions/2.7/Python" \
+ ac_cv_python_libs="-L${prefix}/lib -bundle -undefined dynamic_lookup ${frameworks_dir}/Python.framework/Versions/2.7/Python" \
+ ac_cv_python_compile=${configure.cc}
use_parallel_build yes
-build.target swig-py
-destroot.target install-swig-py DESTDIR=${destroot}
+build.target swig-py
+destroot.target install-swig-py DESTDIR=${destroot}
-test.run yes
-test.target check-swig-py
+test.run yes
+test.target check-swig-py
pre-test {
- set x {}
- fs-traverse dir ${worksrcpath}/subversion {
- if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
- lappend x ${dir}
- continue
- }
- }
- test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
- }
+ set x {}
+ fs-traverse dir ${worksrcpath}/subversion {
+ if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
+ lappend x ${dir}
+ continue
+ }
+ }
+ test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
+ }
-pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
- ${worksrcpath}/configure
- }
+pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
+ ${worksrcpath}/configure
+ }
-post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
- ${worksrcpath}/libtool
- }
+post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
+ ${worksrcpath}/libtool
+ }
variant no_bdb description {Build without support for BerkeleyDB repositories} {
- depends_lib-delete port:db46
- configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
- configure.args-append --without-berkeley-db
- }
+ depends_lib-delete port:db46
+ configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
+ configure.args-append --without-berkeley-db
+ }
post-destroot {
- set PYTHON_PATH ${frameworks_dir}/Python.framework/Versions/2.7/lib/python2.7
+ set PYTHON_PATH ${frameworks_dir}/Python.framework/Versions/2.7/lib/python2.7
- xinstall -m 755 -d ${destroot}${PYTHON_PATH}/site-packages
- xinstall -m 755 ${portpath}/${filesdir}/svn-python.pth \
- ${destroot}${PYTHON_PATH}/site-packages
- reinplace "s|@PREFIX@|${prefix}|g" \
- ${destroot}${PYTHON_PATH}/site-packages/svn-python.pth
+ xinstall -m 755 -d ${destroot}${PYTHON_PATH}/site-packages
+ xinstall -m 755 ${portpath}/${filesdir}/svn-python.pth \
+ ${destroot}${PYTHON_PATH}/site-packages
+ reinplace "s|@PREFIX@|${prefix}|g" \
+ ${destroot}${PYTHON_PATH}/site-packages/svn-python.pth
- file rename "${destroot}${prefix}/lib/svn-python" \
- "${destroot}${prefix}/lib/svn-python2.7"
- }
+ file rename "${destroot}${prefix}/lib/svn-python" \
+ "${destroot}${prefix}/lib/svn-python2.7"
+ }
# CarbonCore/MacTypes.h: No such file or directory
-platform puredarwin { configure.args-append \
- --disable-keychain
- }
+platform puredarwin { configure.args-append \
+ --disable-keychain
+ }
-livecheck.type regex
-livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
-livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
+livecheck.type regex
+livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
+livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
Modified: branches/subversion-subports/dports/devel/subversion-rubybindings/Portfile
===================================================================
--- branches/subversion-subports/dports/devel/subversion-rubybindings/Portfile 2013-08-08 04:42:19 UTC (rev 109117)
+++ branches/subversion-subports/dports/devel/subversion-rubybindings/Portfile 2013-08-08 05:32:17 UTC (rev 109118)
@@ -1,3 +1,4 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
PortSystem 1.0
@@ -2,74 +3,74 @@
-name subversion-rubybindings
-version 1.8.1
-revision 1
-categories devel ruby
-platforms darwin
-maintainers geeklair.net:dluke blair
-description Ruby bindings for the subversion version control system (svn)
-license Apache-2
+name subversion-rubybindings
+version 1.8.1
+revision 1
+categories devel ruby
+platforms darwin
+maintainers geeklair.net:dluke blair
+description Ruby bindings for the subversion version control system (svn)
+license Apache-2
-long_description Subversion (svn) is a version control system designed to be \
- as similar to cvs(1) as possible, while fixing many \
- outstanding problems with cvs(1). The ruby bindings \
- provide access to subversion API from ruby.
+long_description Subversion (svn) is a version control system designed to be \
+ as similar to cvs(1) as possible, while fixing many \
+ outstanding problems with cvs(1). The ruby bindings \
+ provide access to subversion API from ruby.
-homepage http://subversion.apache.org/
-master_sites apache:subversion
-use_bzip2 yes
-checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
- sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
- rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
+homepage http://subversion.apache.org/
+master_sites apache:subversion
+use_bzip2 yes
+checksums md5 f2ee0471b8a560f5efa0f2349d9c9ab9 \
+ sha1 7705819a0037c14fb32eef36f2e57a803217c689 \
+ rmd160 aaff1efd8e1b8112603eb7855cb546316fe88707
-distname subversion-${version}
-dist_subdir subversion
+distname subversion-${version}
+dist_subdir subversion
-test.run yes
-test.target check-swig-rb
+test.run yes
+test.target check-swig-rb
-depends_lib port:expat \
- port:apr port:apr-util \
- port:db46 port:subversion \
- port:ruby port:sqlite3 \
- port:gettext port:libiconv \
- port:serf1 port:cyrus-sasl2 \
- port:file port:libcomerr
+depends_lib port:expat \
+ port:apr port:apr-util \
+ port:db46 port:subversion \
+ port:ruby port:sqlite3 \
+ port:gettext port:libiconv \
+ port:serf1 port:cyrus-sasl2 \
+ port:file port:libcomerr
-configure.env RUBY=${prefix}/bin/ruby1.8
-configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
- --with-apr=${prefix}/bin/apr-1-config \
- --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
- --mandir=\\\${prefix}/share/man \
- --with-serf=${prefix} \
- --with-sasl=${prefix} \
- --with-libmagic=${prefix} \
- --without-gnome-keyring
+configure.env RUBY=${prefix}/bin/ruby1.8
+configure.args --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6 \
+ --with-apr=${prefix}/bin/apr-1-config \
+ --with-apr-util=${prefix}/bin/apu-1-config --without-apxs \
+ --mandir=\\\${prefix}/share/man \
+ --with-serf=${prefix} \
+ --with-sasl=${prefix} \
+ --with-libmagic=${prefix} \
+ --without-gnome-keyring
-build.target swig-rb
-destroot.target install-swig-rb
+build.target swig-rb
+destroot.target install-swig-rb
-patchfiles patch-swig-ruby-core.c.diff
+patchfiles patch-swig-ruby-core.c.diff
pre-test {
- set x {}
- fs-traverse dir ${worksrcpath}/subversion {
- if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
- lappend x ${dir}
- continue
- }
- }
+ set x {}
+ fs-traverse dir ${worksrcpath}/subversion {
+ if {[file tail ${dir}] == ".libs" && [file isdirectory ${dir}]} {
+ lappend x ${dir}
+ continue
+ }
+ }
- test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
- }
+ test.env-append DYLD_LIBRARY_PATH=[join ${x} ":"]
+ }
-pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
- ${worksrcpath}/configure
- }
+pre-configure { reinplace "s|hardcode_direct=yes|hardcode_direct=no|g" \
+ ${worksrcpath}/configure
+ }
-post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
- ${worksrcpath}/libtool
- }
+post-configure { reinplace "s|need_relink=yes|need_relink=no|g" \
+ ${worksrcpath}/libtool
+ }
variant no_bdb description {Build without support for BerkeleyDB repositories} {
- depends_lib-delete port:db46
+ depends_lib-delete port:db46
configure.args-delete --with-berkeley-db=:${prefix}/include/db46:${prefix}/lib/db46:db-4.6
@@ -79,10 +80,10 @@
}
# CarbonCore/MacTypes.h: No such file or directory
-platform puredarwin { configure.args-append \
- --disable-keychain
- }
+platform puredarwin { configure.args-append \
+ --disable-keychain
+ }
-livecheck.type regex
-livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
-livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
+livecheck.type regex
+livecheck.url http://svn.apache.org/repos/asf/subversion/tags/
+livecheck.regex "(\\d+\\.\\d+\\.\\d+)/"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20130807/bbe8e682/attachment-0001.html>
More information about the macports-changes
mailing list