[144686] trunk/dports/net/openssh/files
raimue at macports.org
raimue at macports.org
Fri Jan 15 02:05:27 PST 2016
Revision: 144686
https://trac.macports.org/changeset/144686
Author: raimue at macports.org
Date: 2016-01-15 02:05:27 -0800 (Fri, 15 Jan 2016)
Log Message:
-----------
net/openssh:
Rename +hpn patch for new version, closes #50336
Added Paths:
-----------
trunk/dports/net/openssh/files/openssh-7.1p2-hpnssh14v5.diff
Removed Paths:
-------------
trunk/dports/net/openssh/files/openssh-7.1p1-hpnssh14v5.diff
Deleted: trunk/dports/net/openssh/files/openssh-7.1p1-hpnssh14v5.diff
===================================================================
--- trunk/dports/net/openssh/files/openssh-7.1p1-hpnssh14v5.diff 2016-01-15 10:04:51 UTC (rev 144685)
+++ trunk/dports/net/openssh/files/openssh-7.1p1-hpnssh14v5.diff 2016-01-15 10:05:27 UTC (rev 144686)
@@ -1,1292 +0,0 @@
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ b/HPN-README 2015-10-24 07:22:39.000000000 +0200
-@@ -0,0 +1,129 @@
-+Notes:
-+
-+MULTI-THREADED CIPHER:
-+The AES cipher in CTR mode has been multithreaded (MTR-AES-CTR). This will allow ssh installations
-+on hosts with multiple cores to use more than one processing core during encryption.
-+Tests have show significant throughput performance increases when using MTR-AES-CTR up
-+to and including a full gigabit per second on quad core systems. It should be possible to
-+achieve full line rate on dual core systems but OS and data management overhead makes this
-+more difficult to achieve. The cipher stream from MTR-AES-CTR is entirely compatible with single
-+thread AES-CTR (ST-AES-CTR) implementations and should be 100% backward compatible. Optimal
-+performance requires the MTR-AES-CTR mode be enabled on both ends of the connection.
-+The MTR-AES-CTR replaces ST-AES-CTR and is used in exactly the same way with the same
-+nomenclature.
-+Use examples: ssh -caes128-ctr you at host.com
-+ scp -oCipher=aes256-ctr file you at host.com:~/file
-+
-+NONE CIPHER:
-+To use the NONE option you must have the NoneEnabled switch set on the server and
-+you *must* have *both* NoneEnabled and NoneSwitch set to yes on the client. The NONE
-+feature works with ALL ssh subsystems (as far as we can tell) *AS LONG AS* a tty is not
-+spawned. If a user uses the -T switch to prevent a tty being created the NONE cipher will
-+be disabled.
-+
-+The performance increase will only be as good as the network and TCP stack tuning
-+on the receiver side of the connection allows. As a rule of thumb a user will need
-+at least 10Mb/s connection with a 100ms RTT to see a doubling of performance. The
-+HPN-SSH home page describes this in greater detail.
-+
-+http://www.psc.edu/networking/projects/hpn-ssh
-+
-+BUFFER SIZES:
-+
-+If HPN is disabled the receive buffer size will be set to the
-+OpenSSH default of 64K.
-+
-+If an HPN system connects to a nonHPN system the receive buffer will
-+be set to the HPNBufferSize value. The default is 2MB but user adjustable.
-+
-+If an HPN to HPN connection is established a number of different things might
-+happen based on the user options and conditions.
-+
-+Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll enabled, TCPRcvBuf NOT Set
-+HPN Buffer Size = up to 64MB
-+This is the default state. The HPN buffer size will grow to a maximum of 64MB
-+as the TCP receive buffer grows. The maximum HPN Buffer size of 64MB is
-+geared towards 10GigE transcontinental connections.
-+
-+Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll disabled, TCPRcvBuf NOT Set
-+HPN Buffer Size = TCP receive buffer value.
-+Users on non-autotuning systesm should disable TCPRcvBufPoll in the
-+ssh_cofig and sshd_config
-+
-+Conditions: HPNBufferSize SET, TCPRcvBufPoll disabled, TCPRcvBuf NOT Set
-+HPN Buffer Size = minmum of TCP receive buffer and HPNBufferSize.
-+This would be the system defined TCP receive buffer (RWIN).
-+
-+Conditions: HPNBufferSize SET, TCPRcvBufPoll disabled, TCPRcvBuf SET
-+HPN Buffer Size = minmum of TCPRcvBuf and HPNBufferSize.
-+Generally there is no need to set both.
-+
-+Conditions: HPNBufferSize SET, TCPRcvBufPoll enabled, TCPRcvBuf NOT Set
-+HPN Buffer Size = grows to HPNBufferSize
-+The buffer will grow up to the maximum size specified here.
-+
-+Conditions: HPNBufferSize SET, TCPRcvBufPoll enabled, TCPRcvBuf SET
-+HPN Buffer Size = minmum of TCPRcvBuf and HPNBufferSize.
-+Generally there is no need to set both of these, especially on autotuning
-+systems. However, if the users wishes to override the autotuning this would be
-+one way to do it.
-+
-+Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll enabled, TCPRcvBuf SET
-+HPN Buffer Size = TCPRcvBuf.
-+This will override autotuning and set the TCP recieve buffer to the user defined
-+value.
-+
-+
-+HPN Specific Configuration options
-+
-+TcpRcvBuf=[int]KB client
-+ set the TCP socket receive buffer to n Kilobytes. It can be set up to the
-+maximum socket size allowed by the system. This is useful in situations where
-+the tcp receive window is set low but the maximum buffer size is set
-+higher (as is typical). This works on a per TCP connection basis. You can also
-+use this to artifically limit the transfer rate of the connection. In these
-+cases the throughput will be no more than n/RTT. The minimum buffer size is 1KB.
-+Default is the current system wide tcp receive buffer size.
-+
-+TcpRcvBufPoll=[yes/no] client/server
-+ enable of disable the polling of the tcp receive buffer through the life
-+of the connection. You would want to make sure that this option is enabled
-+for systems making use of autotuning kernels (linux 2.4.24+, 2.6, MS Vista)
-+default is yes.
-+
-+NoneEnabled=[yes/no] client/server
-+ enable or disable the use of the None cipher. Care must always be used
-+when enabling this as it will allow users to send data in the clear. However,
-+it is important to note that authentication information remains encrypted
-+even if this option is enabled. Set to no by default.
-+
-+NoneSwitch=[yes/no] client
-+ Switch the encryption cipher being used to the None cipher after
-+authentication takes place. NoneEnabled must be enabled on both the client
-+and server side of the connection. When the connection switches to the NONE
-+cipher a warning is sent to STDERR. The connection attempt will fail with an
-+error if a client requests a NoneSwitch from the server that does not explicitly
-+have NoneEnabled set to yes. Note: The NONE cipher cannot be used in
-+interactive (shell) sessions and it will fail silently. Set to no by default.
-+
-+HPNDisabled=[yes/no] client/server
-+ In some situations, such as transfers on a local area network, the impact
-+of the HPN code produces a net decrease in performance. In these cases it is
-+helpful to disable the HPN functionality. By default HPNDisabled is set to no.
-+
-+HPNBufferSize=[int]KB client/server
-+ This is the default buffer size the HPN functionality uses when interacting
-+with nonHPN SSH installations. Conceptually this is similar to the TcpRcvBuf
-+option as applied to the internal SSH flow control. This value can range from
-+1KB to 64MB (1-65536). Use of oversized or undersized buffers can cause performance
-+problems depending on the length of the network path. The default size of this buffer
-+is 2MB.
-+
-+
-+Credits: This patch was conceived, designed, and led by Chris Rapier (rapier at psc.edu)
-+ The majority of the actual coding for versions up to HPN12v1 was performed
-+ by Michael Stevens (mstevens at andrew.cmu.edu). The MT-AES-CTR cipher was
-+ implemented by Ben Bennet (ben at psc.edu) and improved by Mike Tasota
-+ (tasota at gmail.com) an NSF REU grant recipient for 2013.
-+ This work was financed, in part, by Cisco System, Inc., the National
-+ Library of Medicine, and the National Science Foundation.
---- a/channels.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/channels.c 2015-10-24 05:07:01.000000000 +0200
-@@ -186,6 +186,12 @@ static void port_open_helper(Channel *c,
- static int connect_next(struct channel_connect *);
- static void channel_connect_ctx_free(struct channel_connect *);
-
-+
-+#ifdef HPN_ENABLED
-+static int hpn_disabled = 0;
-+static int hpn_buffer_size = 2 * 1024 * 1024;
-+#endif
-+
- /* -- channel core */
-
- Channel *
-@@ -336,6 +342,9 @@ channel_new(char *ctype, int type, int r
- c->local_window_max = window;
- c->local_consumed = 0;
- c->local_maxpacket = maxpack;
-+#ifdef HPN_ENABLED
-+ c->dynamic_window = 0;
-+#endif
- c->remote_id = -1;
- c->remote_name = xstrdup(remote_name);
- c->remote_window = 0;
-@@ -840,11 +849,41 @@ channel_pre_open_13(Channel *c, fd_set *
- FD_SET(c->sock, writeset);
- }
-
-+#ifdef HPN_ENABLED
-+static u_int
-+channel_tcpwinsz(void)
-+{
-+ u_int32_t tcpwinsz = 0;
-+ socklen_t optsz = sizeof(tcpwinsz);
-+ int ret = -1;
-+
-+ /* if we aren't on a socket return 128KB */
-+ if (!packet_connection_is_on_socket())
-+ return (128*1024);
-+ ret = getsockopt(packet_get_connection_in(),
-+ SOL_SOCKET, SO_RCVBUF, &tcpwinsz, &optsz);
-+ /* return no more than SSHBUF_SIZE_MAX */
-+ if (ret == 0 && tcpwinsz > SSHBUF_SIZE_MAX)
-+ tcpwinsz = SSHBUF_SIZE_MAX;
-+ debug2("tcpwinsz: %d for connection: %d", tcpwinsz,
-+ packet_get_connection_in());
-+ return (tcpwinsz);
-+}
-+#endif
-+
- static void
- channel_pre_open(Channel *c, fd_set *readset, fd_set *writeset)
- {
- u_int limit = compat20 ? c->remote_window : packet_get_maxsize();
-
-+#ifdef HPN_ENABLED
-+ /* check buffer limits */
-+ if (!c->tcpwinsz || c->dynamic_window > 0)
-+ c->tcpwinsz = channel_tcpwinsz();
-+
-+ limit = MIN(limit, 2 * c->tcpwinsz);
-+#endif
-+
- if (c->istate == CHAN_INPUT_OPEN &&
- limit > 0 &&
- buffer_len(&c->input) < limit &&
-@@ -1862,6 +1901,20 @@ channel_check_window(Channel *c)
- c->local_maxpacket*3) ||
- c->local_window < c->local_window_max/2) &&
- c->local_consumed > 0) {
-+#ifdef HPN_ENABLED
-+ /* adjust max window size if we are in a dynamic environment */
-+ if (c->dynamic_window && (c->tcpwinsz > c->local_window_max)) {
-+ u_int addition = 0;
-+
-+ /*
-+ * grow the window somewhat aggressively to maintain
-+ * pressure
-+ */
-+ addition = 1.5*(c->tcpwinsz - c->local_window_max);
-+ c->local_window_max += addition;
-+ c->local_consumed += addition;
-+ }
-+#endif
- packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
- packet_put_int(c->remote_id);
- packet_put_int(c->local_consumed);
-@@ -2813,6 +2866,17 @@ channel_fwd_bind_addr(const char *listen
- return addr;
- }
-
-+#ifdef HPN_ENABLED
-+void
-+channel_set_hpn(int external_hpn_disabled, int external_hpn_buffer_size)
-+{
-+ hpn_disabled = external_hpn_disabled;
-+ hpn_buffer_size = external_hpn_buffer_size;
-+ debug("HPN Disabled: %d, HPN Buffer Size: %d", hpn_disabled,
-+ hpn_buffer_size);
-+}
-+#endif
-+
- static int
- channel_setup_fwd_listener_tcpip(int type, struct Forward *fwd,
- int *allocated_listen_port, struct ForwardOptions *fwd_opts)
-@@ -2941,6 +3005,17 @@ channel_setup_fwd_listener_tcpip(int typ
- }
-
- /* Allocate a channel number for the socket. */
-+#ifdef HPN_ENABLED
-+ /*
-+ * explicitly test for hpn disabled option. if true use smaller
-+ * window size.
-+ */
-+ if (!hpn_disabled)
-+ c = channel_new("port listener", type, sock, sock, -1,
-+ hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT,
-+ 0, "port listener", 1);
-+ else
-+#endif
- c = channel_new("port listener", type, sock, sock, -1,
- CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT,
- 0, "port listener", 1);
-@@ -3975,6 +4050,14 @@ x11_create_display_inet(int x11_display_
- *chanids = xcalloc(num_socks + 1, sizeof(**chanids));
- for (n = 0; n < num_socks; n++) {
- sock = socks[n];
-+#ifdef HPN_ENABLED
-+ if (!hpn_disabled)
-+ nc = channel_new("x11 listener",
-+ SSH_CHANNEL_X11_LISTENER, sock, sock, -1,
-+ hpn_buffer_size, CHAN_X11_PACKET_DEFAULT,
-+ 0, "X11 inet listener", 1);
-+ else
-+#endif
- nc = channel_new("x11 listener",
- SSH_CHANNEL_X11_LISTENER, sock, sock, -1,
- CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT,
---- a/channels.h 2015-10-24 04:53:18.000000000 +0200
-+++ b/channels.h 2015-10-24 05:07:01.000000000 +0200
-@@ -136,6 +136,10 @@ struct Channel {
- u_int local_maxpacket;
- int extended_usage;
- int single_connection;
-+#ifdef HPN_ENABLED
-+ int dynamic_window;
-+ u_int tcpwinsz;
-+#endif
-
- char *ctype; /* type */
-
-@@ -312,4 +316,9 @@ void chan_rcvd_ieof(Channel *);
- void chan_write_failed(Channel *);
- void chan_obuf_empty(Channel *);
-
-+#ifdef HPN_ENABLED
-+/* hpn handler */
-+void channel_set_hpn(int, int);
-+#endif
-+
- #endif
---- a/cipher.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/cipher.c 2015-10-24 05:07:01.000000000 +0200
-@@ -244,7 +244,13 @@ ciphers_valid(const char *names)
- for ((p = strsep(&cp, CIPHER_SEP)); p && *p != '\0';
- (p = strsep(&cp, CIPHER_SEP))) {
- c = cipher_by_name(p);
-- if (c == NULL || c->number != SSH_CIPHER_SSH2) {
-+ if (c == NULL || (c->number != SSH_CIPHER_SSH2 &&
-+#ifdef NONE_CIPHER_ENABLED
-+ c->number != SSH_CIPHER_NONE
-+#else
-+ 1
-+#endif
-+ )) {
- free(cipher_list);
- return 0;
- }
-@@ -545,6 +551,9 @@ cipher_get_keyiv(struct sshcipher_ctx *c
-
- switch (c->number) {
- #ifdef WITH_OPENSSL
-+#ifdef NONE_CIPHER_ENABLED
-+ case SSH_CIPHER_NONE:
-+#endif
- case SSH_CIPHER_SSH2:
- case SSH_CIPHER_DES:
- case SSH_CIPHER_BLOWFISH:
-@@ -593,6 +602,9 @@ cipher_set_keyiv(struct sshcipher_ctx *c
-
- switch (c->number) {
- #ifdef WITH_OPENSSL
-+#ifdef NONE_CIPHER_ENABLED
-+ case SSH_CIPHER_NONE:
-+#endif
- case SSH_CIPHER_SSH2:
- case SSH_CIPHER_DES:
- case SSH_CIPHER_BLOWFISH:
---- a/clientloop.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/clientloop.c 2015-10-24 05:07:01.000000000 +0200
-@@ -1957,6 +1957,15 @@ client_request_x11(const char *request_t
- sock = x11_connect_display();
- if (sock < 0)
- return NULL;
-+#ifdef HPN_ENABLED
-+ /* again is this really necessary for X11? */
-+ if (!options.hpn_disabled)
-+ c = channel_new("x11",
-+ SSH_CHANNEL_X11_OPEN, sock, sock, -1,
-+ options.hpn_buffer_size,
-+ CHAN_X11_PACKET_DEFAULT, 0, "x11", 1);
-+ else
-+#endif
- c = channel_new("x11",
- SSH_CHANNEL_X11_OPEN, sock, sock, -1,
- CHAN_TCP_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 0, "x11", 1);
-@@ -1982,6 +1991,14 @@ client_request_agent(const char *request
- __func__, ssh_err(r));
- return NULL;
- }
-+#ifdef HPN_ENABLED
-+ if (!options.hpn_disabled)
-+ c = channel_new("authentication agent connection",
-+ SSH_CHANNEL_OPEN, sock, sock, -1,
-+ options.hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT, 0,
-+ "authentication agent connection", 1);
-+ else
-+#endif
- c = channel_new("authentication agent connection",
- SSH_CHANNEL_OPEN, sock, sock, -1,
- CHAN_X11_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0,
-@@ -2012,6 +2029,12 @@ client_request_tun_fwd(int tun_mode, int
- return -1;
- }
-
-+#ifdef HPN_ENABLED
-+ if (!options.hpn_disabled)
-+ c = channel_new("tun", SSH_CHANNEL_OPENING, fd, fd, -1,
-+ options.hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
-+ else
-+#endif
- c = channel_new("tun", SSH_CHANNEL_OPENING, fd, fd, -1,
- CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
- c->datagram = 1;
---- a/compat.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/compat.c 2015-10-24 05:07:02.000000000 +0200
-@@ -210,6 +210,14 @@ compat_datafellows(const char *version)
- debug("match: %s pat %s compat 0x%08x",
- version, check[i].pat, check[i].bugs);
- datafellows = check[i].bugs; /* XXX for now */
-+#ifdef HPN_ENABLED
-+ /* Check to see if the remote side is OpenSSH and not HPN */
-+ if (strstr(version,"OpenSSH") != NULL &&
-+ strstr(version,"hpn") == NULL) {
-+ datafellows |= SSH_BUG_LARGEWINDOW;
-+ debug("Remote is NON-HPN aware");
-+ }
-+#endif
- return check[i].bugs;
- }
- }
---- a/compat.h 2015-10-24 04:53:18.000000000 +0200
-+++ b/compat.h 2015-10-24 06:01:31.000000000 +0200
-@@ -62,6 +62,9 @@
- #define SSH_BUG_CURVE25519PAD 0x10000000
- #define SSH_BUG_HOSTKEYS 0x20000000
- #define SSH_BUG_DHGEX_LARGE 0x40000000
-+#ifdef HPN_ENABLED
-+#define SSH_BUG_LARGEWINDOW 0x80000000
-+#endif
-
- void enable_compat13(void);
- void enable_compat20(void);
---- a/configure.ac 2015-10-24 04:53:18.000000000 +0200
-+++ b/configure.ac 2015-10-24 05:07:02.000000000 +0200
-@@ -4271,6 +4271,25 @@ AC_ARG_WITH([maildir],
- ]
- ) # maildir
-
-+#check whether user wants HPN support
-+HPN_MSG="no"
-+AC_ARG_WITH(hpn,
-+ [ --with-hpn Enable HPN support],
-+ [ if test "x$withval" != "xno" ; then
-+ AC_DEFINE(HPN_ENABLED,1,[Define if you want HPN support.])
-+ HPN_MSG="yes"
-+ fi ]
-+)
-+#check whether user wants NONECIPHER support
-+NONECIPHER_MSG="no"
-+AC_ARG_WITH(nonecipher,
-+ [ --with-nonecipher Enable NONECIPHER support],
-+ [ if test "x$withval" != "xno" ; then
-+ AC_DEFINE(NONE_CIPHER_ENABLED,1,[Define if you want NONECIPHER support.])
-+ NONECIPHER_MSG="yes"
-+ fi ]
-+)
-+
- if test ! -z "$cross_compiling" && test "x$cross_compiling" = "xyes"; then
- AC_MSG_WARN([cross compiling: Disabling /dev/ptmx test])
- disable_ptmx_check=yes
-@@ -4938,6 +4957,8 @@ echo " Translate v4 in v6 hack
- echo " BSD Auth support: $BSD_AUTH_MSG"
- echo " Random number source: $RAND_MSG"
- echo " Privsep sandbox style: $SANDBOX_STYLE"
-+echo " HPN support: $HPN_MSG"
-+echo " NONECIPHER support: $NONECIPHER_MSG"
-
- echo ""
-
---- a/kex.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/kex.c 2015-10-24 05:19:11.000000000 +0200
-@@ -652,6 +652,13 @@ kex_choose_conf(struct ssh *ssh)
- int nenc, nmac, ncomp;
- u_int mode, ctos, need, dh_need, authlen;
- int r, first_kex_follows;
-+#ifdef NONE_CIPHER_ENABLED
-+ /* XXX: Could this move into the lower block? */
-+ int auth_flag;
-+
-+ auth_flag = ssh_packet_authentication_state(ssh);
-+ debug ("AUTH STATE IS %d", auth_flag);
-+#endif
-
- if ((r = kex_buf2prop(kex->my, NULL, &my)) != 0 ||
- (r = kex_buf2prop(kex->peer, &first_kex_follows, &peer)) != 0)
-@@ -709,6 +716,17 @@ kex_choose_conf(struct ssh *ssh)
- peer[ncomp] = NULL;
- goto out;
- }
-+#ifdef NONE_CIPHER_ENABLED
-+ debug("REQUESTED ENC.NAME is '%s'", newkeys->enc.name);
-+ if (strcmp(newkeys->enc.name, "none") == 0) {
-+ debug("Requesting NONE. Authflag is %d", auth_flag);
-+ if (auth_flag == 1) {
-+ debug("None requested post authentication.");
-+ } else {
-+ fatal("Pre-authentication none cipher requests are not allowed.");
-+ }
-+ }
-+#endif
- debug("kex: %s %s %s %s",
- ctos ? "client->server" : "server->client",
- newkeys->enc.name,
---- a/myproposal.h 2015-10-24 04:53:18.000000000 +0200
-+++ b/myproposal.h 2015-10-24 05:07:02.000000000 +0200
-@@ -169,6 +169,10 @@
- #define KEX_DEFAULT_COMP "none,zlib at openssh.com,zlib"
- #define KEX_DEFAULT_LANG ""
-
-+#ifdef NONE_CIPHER_ENABLED
-+#define KEX_ENCRYPT_INCLUDE_NONE KEX_SERVER_ENCRYPT ",none"
-+#endif
-+
- #define KEX_CLIENT \
- KEX_CLIENT_KEX, \
- KEX_DEFAULT_PK_ALG, \
---- a/packet.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/packet.c 2015-10-24 05:07:02.000000000 +0200
-@@ -2228,6 +2228,24 @@ ssh_packet_send_ignore(struct ssh *ssh,
- }
- }
-
-+#ifdef NONE_CIPHER_ENABLED
-+/* this supports the forced rekeying required for the NONE cipher */
-+int rekey_requested = 0;
-+void
-+packet_request_rekeying(void)
-+{
-+ rekey_requested = 1;
-+}
-+
-+int
-+ssh_packet_authentication_state(struct ssh *ssh)
-+{
-+ struct session_state *state = ssh->state;
-+
-+ return(state->after_authentication);
-+}
-+#endif
-+
- #define MAX_PACKETS (1U<<31)
- int
- ssh_packet_need_rekeying(struct ssh *ssh)
-@@ -2236,6 +2254,12 @@ ssh_packet_need_rekeying(struct ssh *ssh
-
- if (ssh->compat & SSH_BUG_NOREKEY)
- return 0;
-+#ifdef NONE_CIPHER_ENABLED
-+ if (rekey_requested == 1) {
-+ rekey_requested = 0;
-+ return 1;
-+ }
-+#endif
- return
- (state->p_send.packets > MAX_PACKETS) ||
- (state->p_read.packets > MAX_PACKETS) ||
---- a/packet.h 2015-10-24 04:53:18.000000000 +0200
-+++ b/packet.h 2015-10-24 05:07:02.000000000 +0200
-@@ -188,6 +188,11 @@ int sshpkt_get_bignum2(struct ssh *ssh,
- int sshpkt_get_end(struct ssh *ssh);
- const u_char *sshpkt_ptr(struct ssh *, size_t *lenp);
-
-+#ifdef NONE_CIPHER_ENABLED
-+void packet_request_rekeying(void);
-+int ssh_packet_authentication_state(struct ssh *ssh);
-+#endif
-+
- /* OLD API */
- extern struct ssh *active_state;
- #include "opacket.h"
---- a/readconf.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/readconf.c 2015-10-24 06:10:34.000000000 +0200
-@@ -153,6 +153,12 @@ typedef enum {
- oTunnel, oTunnelDevice, oLocalCommand, oPermitLocalCommand,
- oVisualHostKey, oUseRoaming,
- oKexAlgorithms, oIPQoS, oRequestTTY, oIgnoreUnknown, oProxyUseFdpass,
-+#ifdef HPN_ENABLED
-+ oHPNDisabled, oHPNBufferSize, oTcpRcvBufPoll, oTcpRcvBuf,
-+#endif
-+#ifdef NONE_CIPHER_ENABLED
-+ oNoneSwitch, oNoneEnabled,
-+#endif
- oCanonicalDomains, oCanonicalizeHostname, oCanonicalizeMaxDots,
- oCanonicalizeFallbackLocal, oCanonicalizePermittedCNAMEs,
- oStreamLocalBindMask, oStreamLocalBindUnlink, oRevokedHostKeys,
-@@ -277,6 +283,16 @@ static struct {
- { "updatehostkeys", oUpdateHostkeys },
- { "hostbasedkeytypes", oHostbasedKeyTypes },
- { "pubkeyacceptedkeytypes", oPubkeyAcceptedKeyTypes },
-+#ifdef NONE_CIPHER_ENABLED
-+ { "noneenabled", oNoneEnabled },
-+ { "noneswitch", oNoneSwitch },
-+#endif
-+#ifdef HPN_ENABLED
-+ { "tcprcvbufpoll", oTcpRcvBufPoll },
-+ { "tcprcvbuf", oTcpRcvBuf },
-+ { "hpndisabled", oHPNDisabled },
-+ { "hpnbuffersize", oHPNBufferSize },
-+#endif
- { "ignoreunknown", oIgnoreUnknown },
-
- { NULL, oBadOption }
-@@ -906,6 +922,44 @@ parse_time:
- intptr = &options->check_host_ip;
- goto parse_flag;
-
-+#ifdef HPN_ENABLED
-+ case oHPNDisabled:
-+ intptr = &options->hpn_disabled;
-+ goto parse_flag;
-+
-+ case oHPNBufferSize:
-+ intptr = &options->hpn_buffer_size;
-+ goto parse_int;
-+
-+ case oTcpRcvBufPoll:
-+ intptr = &options->tcp_rcv_buf_poll;
-+ goto parse_flag;
-+
-+ case oTcpRcvBuf:
-+ intptr = &options->tcp_rcv_buf;
-+ goto parse_int;
-+#endif
-+
-+#ifdef NONE_CIPHER_ENABLED
-+ case oNoneEnabled:
-+ intptr = &options->none_enabled;
-+ goto parse_flag;
-+
-+ /* we check to see if the command comes from the */
-+ /* command line or not. If it does then enable it */
-+ /* otherwise fail. NONE should never be a default configuration */
-+ case oNoneSwitch:
-+ if(strcmp(filename,"command-line") == 0) {
-+ intptr = &options->none_switch;
-+ goto parse_flag;
-+ } else {
-+ error("NoneSwitch is found in %.200s.\nYou may only use this configuration option from the command line", filename);
-+ error("Continuing...");
-+ debug("NoneSwitch directive found in %.200s.", filename);
-+ return 0;
-+ }
-+#endif
-+
- case oVerifyHostKeyDNS:
- intptr = &options->verify_host_key_dns;
- multistate_ptr = multistate_yesnoask;
-@@ -1665,6 +1719,16 @@ initialize_options(Options * options)
- options->ip_qos_interactive = -1;
- options->ip_qos_bulk = -1;
- options->request_tty = -1;
-+#ifdef NONE_CIPHER_ENABLED
-+ options->none_switch = -1;
-+ options->none_enabled = -1;
-+#endif
-+#ifdef HPN_ENABLED
-+ options->hpn_disabled = -1;
-+ options->hpn_buffer_size = -1;
-+ options->tcp_rcv_buf_poll = -1;
-+ options->tcp_rcv_buf = -1;
-+#endif
- options->proxy_use_fdpass = -1;
- options->ignored_unknown = NULL;
- options->num_canonical_domains = 0;
-@@ -1817,6 +1881,35 @@ fill_default_options(Options * options)
- options->server_alive_interval = 0;
- if (options->server_alive_count_max == -1)
- options->server_alive_count_max = 3;
-+#ifdef NONE_CIPHER_ENABLED
-+ if (options->none_switch == -1)
-+ options->none_switch = 0;
-+ if (options->none_enabled == -1)
-+ options->none_enabled = 0;
-+#endif
-+#ifdef HPN_ENABLED
-+ if (options->hpn_disabled == -1)
-+ options->hpn_disabled = 0;
-+ if (options->hpn_buffer_size > -1) {
-+ /* if a user tries to set the size to 0 set it to 1KB */
-+ if (options->hpn_buffer_size == 0)
-+ options->hpn_buffer_size = 1;
-+ /* limit the buffer to 64MB */
-+ if (options->hpn_buffer_size > 64*1024) {
-+ options->hpn_buffer_size = 64*1024*1024;
-+ debug("User requested buffer larger than 64MB. Request"
-+ " reverted to 64MB");
-+ } else
-+ options->hpn_buffer_size *= 1024;
-+ debug("hpn_buffer_size set to %d", options->hpn_buffer_size);
-+ }
-+ if (options->tcp_rcv_buf == 0)
-+ options->tcp_rcv_buf = 1;
-+ if (options->tcp_rcv_buf > -1)
-+ options->tcp_rcv_buf *=1024;
-+ if (options->tcp_rcv_buf_poll == -1)
-+ options->tcp_rcv_buf_poll = 1;
-+#endif
- if (options->control_master == -1)
- options->control_master = 0;
- if (options->control_persist == -1) {
---- a/readconf.h 2015-10-24 04:53:18.000000000 +0200
-+++ b/readconf.h 2015-10-24 06:17:07.000000000 +0200
-@@ -105,6 +105,16 @@ typedef struct {
- int clear_forwardings;
-
- int enable_ssh_keysign;
-+#ifdef NONE_CIPHER_ENABLED
-+ int none_switch; /* Use none cipher */
-+ int none_enabled; /* Allow none to be used */
-+#endif
-+#ifdef HPN_ENABLED
-+ int tcp_rcv_buf; /* user switch to set tcp recv buffer */
-+ int tcp_rcv_buf_poll; /* Option to poll recv buf every window transfer */
-+ int hpn_disabled; /* Switch to disable HPN buffer management */
-+ int hpn_buffer_size; /* User definable size for HPN buffer window */
-+#endif
- int64_t rekey_limit;
- int rekey_interval;
- int no_host_authentication_for_localhost;
---- a/scp.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/scp.c 2015-10-24 05:07:02.000000000 +0200
-@@ -750,7 +750,7 @@ source(int argc, char **argv)
- off_t i, statbytes;
- size_t amt, nr;
- int fd = -1, haderr, indx;
-- char *last, *name, buf[2048], encname[PATH_MAX];
-+ char *last, *name, buf[16384], encname[PATH_MAX];
- int len;
-
- for (indx = 0; indx < argc; ++indx) {
-@@ -919,7 +919,7 @@ sink(int argc, char **argv)
- off_t size, statbytes;
- unsigned long long ull;
- int setimes, targisdir, wrerrno = 0;
-- char ch, *cp, *np, *targ, *why, *vect[1], buf[2048];
-+ char ch, *cp, *np, *targ, *why, *vect[1], buf[16384];
- struct timeval tv[2];
-
- #define atime tv[0]
---- a/servconf.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/servconf.c 2015-10-24 06:21:38.000000000 +0200
-@@ -165,6 +165,14 @@ initialize_server_options(ServerOptions
- options->authorized_principals_file = NULL;
- options->authorized_principals_command = NULL;
- options->authorized_principals_command_user = NULL;
-+#ifdef NONE_CIPHER_ENABLED
-+ options->none_enabled = -1;
-+#endif
-+#ifdef HPN_ENABLED
-+ options->tcp_rcv_buf_poll = -1;
-+ options->hpn_disabled = -1;
-+ options->hpn_buffer_size = -1;
-+#endif
- options->ip_qos_interactive = -1;
- options->ip_qos_bulk = -1;
- options->version_addendum = NULL;
-@@ -329,6 +337,57 @@ fill_default_server_options(ServerOption
- }
- if (options->permit_tun == -1)
- options->permit_tun = SSH_TUNMODE_NO;
-+#ifdef NONE_CIPHER_ENABLED
-+ if (options->none_enabled == -1)
-+ options->none_enabled = 0;
-+#endif
-+#ifdef HPN_ENABLED
-+ if (options->hpn_disabled == -1)
-+ options->hpn_disabled = 0;
-+
-+ if (options->hpn_buffer_size == -1) {
-+ /*
-+ * option not explicitly set. Now we have to figure out
-+ * what value to use.
-+ */
-+ if (options->hpn_disabled == 1) {
-+ options->hpn_buffer_size = CHAN_SES_WINDOW_DEFAULT;
-+ } else {
-+ int sock, socksize;
-+ socklen_t socksizelen = sizeof(socksize);
-+
-+ /*
-+ * get the current RCV size and set it to that
-+ * create a socket but don't connect it
-+ * we use that the get the rcv socket size
-+ */
-+ sock = socket(AF_INET, SOCK_STREAM, 0);
-+ getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
-+ &socksize, &socksizelen);
-+ close(sock);
-+ options->hpn_buffer_size = socksize;
-+ debug ("HPN Buffer Size: %d", options->hpn_buffer_size);
-+ }
-+ } else {
-+ /*
-+ * we have to do this incase the user sets both values in a
-+ * contradictory manner. hpn_disabled overrrides
-+ * hpn_buffer_size
-+ */
-+ if (options->hpn_disabled <= 0) {
-+ if (options->hpn_buffer_size == 0)
-+ options->hpn_buffer_size = 1;
-+ /* limit the maximum buffer to 64MB */
-+ if (options->hpn_buffer_size > 64*1024) {
-+ options->hpn_buffer_size = 64*1024*1024;
-+ } else {
-+ options->hpn_buffer_size *= 1024;
-+ }
-+ } else
-+ options->hpn_buffer_size = CHAN_TCP_WINDOW_DEFAULT;
-+ }
-+#endif
-+
- if (options->ip_qos_interactive == -1)
- options->ip_qos_interactive = IPTOS_LOWDELAY;
- if (options->ip_qos_bulk == -1)
-@@ -418,6 +477,12 @@ typedef enum {
- sHostCertificate,
- sRevokedKeys, sTrustedUserCAKeys, sAuthorizedPrincipalsFile,
- sAuthorizedPrincipalsCommand, sAuthorizedPrincipalsCommandUser,
-+#ifdef NONE_CIPHER_ENABLED
-+ sNoneEnabled,
-+#endif
-+#ifdef HPN_ENABLED
-+ sTcpRcvBufPoll, sHPNDisabled, sHPNBufferSize,
-+#endif
- sKexAlgorithms, sIPQoS, sVersionAddendum,
- sAuthorizedKeysCommand, sAuthorizedKeysCommandUser,
- sAuthenticationMethods, sHostKeyAgent, sPermitUserRC,
-@@ -549,6 +614,14 @@ static struct {
- { "revokedkeys", sRevokedKeys, SSHCFG_ALL },
- { "trustedusercakeys", sTrustedUserCAKeys, SSHCFG_ALL },
- { "authorizedprincipalsfile", sAuthorizedPrincipalsFile, SSHCFG_ALL },
-+#ifdef NONE_CIPHER_ENABLED
-+ { "noneenabled", sNoneEnabled, SSHCFG_ALL },
-+#endif
-+#ifdef HPN_ENABLED
-+ { "hpndisabled", sHPNDisabled, SSHCFG_ALL },
-+ { "hpnbuffersize", sHPNBufferSize, SSHCFG_ALL },
-+ { "tcprcvbufpoll", sTcpRcvBufPoll, SSHCFG_ALL },
-+#endif
- { "kexalgorithms", sKexAlgorithms, SSHCFG_GLOBAL },
- { "ipqos", sIPQoS, SSHCFG_ALL },
- { "authorizedkeyscommand", sAuthorizedKeysCommand, SSHCFG_ALL },
-@@ -1169,6 +1242,25 @@ process_server_config_line(ServerOptions
- intptr = &options->ignore_user_known_hosts;
- goto parse_flag;
-
-+#ifdef NONE_CIPHER_ENABLED
-+ case sNoneEnabled:
-+ intptr = &options->none_enabled;
-+ goto parse_flag;
-+#endif
-+#ifdef HPN_ENABLED
-+ case sTcpRcvBufPoll:
-+ intptr = &options->tcp_rcv_buf_poll;
-+ goto parse_flag;
-+
-+ case sHPNDisabled:
-+ intptr = &options->hpn_disabled;
-+ goto parse_flag;
-+
-+ case sHPNBufferSize:
-+ intptr = &options->hpn_buffer_size;
-+ goto parse_int;
-+#endif
-+
- case sRhostsRSAAuthentication:
- intptr = &options->rhosts_rsa_authentication;
- goto parse_flag;
---- a/servconf.h 2015-10-24 04:53:18.000000000 +0200
-+++ b/servconf.h 2015-10-24 07:22:48.000000000 +0200
-@@ -173,6 +173,15 @@ typedef struct {
-
- int use_pam; /* Enable auth via PAM */
-
-+#ifdef NONE_CIPHER_ENABLED
-+ int none_enabled; /* enable NONE cipher switch */
-+#endif
-+#ifdef HPN_ENABLED
-+ int tcp_rcv_buf_poll; /* poll tcp rcv window in autotuning kernels*/
-+ int hpn_disabled; /* disable hpn functionality. false by default */
-+ int hpn_buffer_size; /* set the hpn buffer size - default 3MB */
-+#endif
-+
- int permit_tun;
-
- int num_permitted_opens;
---- a/serverloop.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/serverloop.c 2015-10-24 05:07:02.000000000 +0200
-@@ -1051,6 +1051,12 @@ server_request_tun(void)
- sock = tun_open(tun, mode);
- if (sock < 0)
- goto done;
-+#ifdef HPN_ENABLED
-+ if (!options.hpn_disabled)
-+ c = channel_new("tun", SSH_CHANNEL_OPEN, sock, sock, -1,
-+ options.hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
-+ else
-+#endif
- c = channel_new("tun", SSH_CHANNEL_OPEN, sock, sock, -1,
- CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
- c->datagram = 1;
-@@ -1088,6 +1094,10 @@ server_request_session(void)
- c = channel_new("session", SSH_CHANNEL_LARVAL,
- -1, -1, -1, /*window size*/0, CHAN_SES_PACKET_DEFAULT,
- 0, "server-session", 1);
-+#ifdef HPN_ENABLED
-+ if (options.tcp_rcv_buf_poll && !options.hpn_disabled)
-+ c->dynamic_window = 1;
-+#endif
- if (session_open(the_authctxt, c->self) != 1) {
- debug("session open failed, free channel %d", c->self);
- channel_free(c);
---- a/session.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/session.c 2015-10-24 05:07:02.000000000 +0200
-@@ -2329,6 +2329,14 @@ session_set_fds(Session *s, int fdin, in
- */
- if (s->chanid == -1)
- fatal("no channel for session %d", s->self);
-+#ifdef HPN_ENABLED
-+ if (!options.hpn_disabled)
-+ channel_set_fds(s->chanid,
-+ fdout, fdin, fderr,
-+ ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
-+ 1, is_tty, options.hpn_buffer_size);
-+ else
-+#endif
- channel_set_fds(s->chanid,
- fdout, fdin, fderr,
- ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
---- a/sftp.1 2015-10-24 04:53:18.000000000 +0200
-+++ b/sftp.1 2015-10-24 05:07:02.000000000 +0200
-@@ -263,7 +263,8 @@ diagnostic messages from
- Specify how many requests may be outstanding at any one time.
- Increasing this may slightly improve file transfer speed
- but will increase memory usage.
--The default is 64 outstanding requests.
-+The default is 256 outstanding requests providing for 8MB
-+of outstanding data with a 32KB buffer.
- .It Fl r
- Recursively copy entire directories when uploading and downloading.
- Note that
---- a/sftp.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/sftp.c 2015-10-24 05:07:02.000000000 +0200
-@@ -71,7 +71,11 @@ typedef void EditLine;
- #include "sftp-client.h"
-
- #define DEFAULT_COPY_BUFLEN 32768 /* Size of buffer for up/download */
-+#ifdef HPN_ENABLED
-+#define DEFAULT_NUM_REQUESTS 256 /* # concurrent outstanding requests */
-+#else
- #define DEFAULT_NUM_REQUESTS 64 /* # concurrent outstanding requests */
-+#endif
-
- /* File to read commands from */
- FILE* infile;
---- a/ssh.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/ssh.c 2015-10-24 05:07:02.000000000 +0200
-@@ -884,6 +884,14 @@ main(int ac, char **av)
- break;
- case 'T':
- options.request_tty = REQUEST_TTY_NO;
-+#ifdef NONE_CIPHER_ENABLED
-+ /*
-+ * ensure that the user doesn't try to backdoor a
-+ * null cipher switch on an interactive session
-+ * so explicitly disable it no matter what.
-+ */
-+ options.none_switch = 0;
-+#endif
- break;
- case 'o':
- line = xstrdup(optarg);
-@@ -1834,9 +1842,85 @@ ssh_session2_open(void)
- if (!isatty(err))
- set_nonblock(err);
-
-+#ifdef HPN_ENABLED
-+ /*
-+ * we need to check to see if what they want to do about buffer
-+ * sizes here. In a hpn to nonhpn connection we want to limit
-+ * the window size to something reasonable in case the far side
-+ * has the large window bug. In hpn to hpn connection we want to
-+ * use the max window size but allow the user to override it
-+ * lastly if they disabled hpn then use the ssh std window size
-+
-+ * so why don't we just do a getsockopt() here and set the
-+ * ssh window to that? In the case of a autotuning receive
-+ * window the window would get stuck at the initial buffer
-+ * size generally less than 96k. Therefore we need to set the
-+ * maximum ssh window size to the maximum hpn buffer size
-+ * unless the user has specifically set the tcprcvbufpoll
-+ * to no. In which case we *can* just set the window to the
-+ * minimum of the hpn buffer size and tcp receive buffer size
-+ */
-+
-+ if (tty_flag)
-+ options.hpn_buffer_size = CHAN_SES_WINDOW_DEFAULT;
-+ else
-+ options.hpn_buffer_size = 2*1024*1024;
-+
-+ if (datafellows & SSH_BUG_LARGEWINDOW) {
-+ debug("HPN to Non-HPN Connection");
-+ } else {
-+ int sock, socksize;
-+ socklen_t socksizelen = sizeof(socksize);
-+
-+ if (options.tcp_rcv_buf_poll <= 0) {
-+ sock = socket(AF_INET, SOCK_STREAM, 0);
-+ getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
-+ &socksize, &socksizelen);
-+ close(sock);
-+ debug("socksize %d", socksize);
-+ options.hpn_buffer_size = socksize;
-+ debug ("HPNBufferSize set to TCP RWIN: %d",
-+ options.hpn_buffer_size);
-+ } else {
-+ if (options.tcp_rcv_buf > 0) {
-+ /*
-+ * create a socket but don't connect it.
-+ * we use that the get the rcv socket size
-+ */
-+ sock = socket(AF_INET, SOCK_STREAM, 0);
-+ /*
-+ * if they are using the tcp_rcv_buf option
-+ * attempt to set the buffer size to that
-+ */
-+ if (options.tcp_rcv_buf)
-+ setsockopt(sock, SOL_SOCKET, SO_RCVBUF,
-+ (void *)&options.tcp_rcv_buf,
-+ sizeof(options.tcp_rcv_buf));
-+ getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
-+ &socksize, &socksizelen);
-+ close(sock);
-+ debug("socksize %d", socksize);
-+ options.hpn_buffer_size = socksize;
-+ debug ("HPNBufferSize set to user TCPRcvBuf: "
-+ "%d", options.hpn_buffer_size);
-+ }
-+ }
-+ }
-+
-+ debug("Final hpn_buffer_size = %d", options.hpn_buffer_size);
-+
-+ window = options.hpn_buffer_size;
-+
-+ channel_set_hpn(options.hpn_disabled, options.hpn_buffer_size);
-+#else
- window = CHAN_SES_WINDOW_DEFAULT;
-+#endif
-+
- packetmax = CHAN_SES_PACKET_DEFAULT;
- if (tty_flag) {
-+#ifdef HPN_ENABLED
-+ window = CHAN_SES_WINDOW_DEFAULT;
-+#endif
- window >>= 1;
- packetmax >>= 1;
- }
-@@ -1845,6 +1929,12 @@ ssh_session2_open(void)
- window, packetmax, CHAN_EXTENDED_WRITE,
- "client-session", /*nonblock*/0);
-
-+#ifdef HPN_ENABLED
-+ if (options.tcp_rcv_buf_poll > 0 && !options.hpn_disabled) {
-+ c->dynamic_window = 1;
-+ debug ("Enabled Dynamic Window Scaling");
-+ }
-+#endif
- debug3("ssh_session2_open: channel_new: %d", c->self);
-
- channel_send_open(c->self);
---- a/sshconnect.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/sshconnect.c 2015-10-24 05:07:02.000000000 +0200
-@@ -266,6 +266,31 @@ ssh_kill_proxy_command(void)
- kill(proxy_command_pid, SIGHUP);
- }
-
-+#ifdef HPN_ENABLED
-+/*
-+ * Set TCP receive buffer if requested.
-+ * Note: tuning needs to happen after the socket is
-+ * created but before the connection happens
-+ * so winscale is negotiated properly -cjr
-+ */
-+static void
-+ssh_set_socket_recvbuf(int sock)
-+{
-+ void *buf = (void *)&options.tcp_rcv_buf;
-+ int sz = sizeof(options.tcp_rcv_buf);
-+ int socksize;
-+ socklen_t socksizelen = sizeof(socksize);
-+
-+ debug("setsockopt Attempting to set SO_RCVBUF to %d", options.tcp_rcv_buf);
-+ if (setsockopt(sock, SOL_SOCKET, SO_RCVBUF, buf, sz) >= 0) {
-+ getsockopt(sock, SOL_SOCKET, SO_RCVBUF, &socksize, &socksizelen);
-+ debug("setsockopt SO_RCVBUF: %.100s %d", strerror(errno), socksize);
-+ } else
-+ error("Couldn't set socket receive buffer to %d: %.100s",
-+ options.tcp_rcv_buf, strerror(errno));
-+}
-+#endif
-+
- /*
- * Creates a (possibly privileged) socket for use as the ssh connection.
- */
-@@ -282,6 +307,11 @@ ssh_create_socket(int privileged, struct
- }
- fcntl(sock, F_SETFD, FD_CLOEXEC);
-
-+#ifdef HPN_ENABLED
-+ if (options.tcp_rcv_buf > 0)
-+ ssh_set_socket_recvbuf(sock);
-+#endif
-+
- /* Bind the socket to an alternative local IP address */
- if (options.bind_address == NULL && !privileged)
- return sock;
-@@ -523,11 +553,23 @@ send_client_banner(int connection_out, i
- {
- /* Send our own protocol version identification. */
- if (compat20) {
-- xasprintf(&client_version_string, "SSH-%d.%d-%.100s\r\n",
-- PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2, SSH_VERSION);
-+ xasprintf(&client_version_string, "SSH-%d.%d-%.100s%s\r\n",
-+ PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2, SSH_VERSION,
-+#ifdef HPN_ENABLED
-+ options.hpn_disabled ? "" : SSH_HPN
-+#else
-+ ""
-+#endif
-+ );
- } else {
-- xasprintf(&client_version_string, "SSH-%d.%d-%.100s\n",
-- PROTOCOL_MAJOR_1, minor1, SSH_VERSION);
-+ xasprintf(&client_version_string, "SSH-%d.%d-%.100s%s\n",
-+ PROTOCOL_MAJOR_1, minor1, SSH_VERSION,
-+#ifdef HPN_ENABLED
-+ options.hpn_disabled ? "" : SSH_HPN
-+#else
-+ ""
-+#endif
-+ );
- }
- if (roaming_atomicio(vwrite, connection_out, client_version_string,
- strlen(client_version_string)) != strlen(client_version_string))
---- a/sshconnect2.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/sshconnect2.c 2015-10-24 05:07:02.000000000 +0200
-@@ -80,6 +80,14 @@
- extern char *client_version_string;
- extern char *server_version_string;
- extern Options options;
-+#ifdef NONE_CIPHER_ENABLED
-+struct kex *xxx_kex;
-+
-+/* tty_flag is set in ssh.c. use this in ssh_userauth2 */
-+/* if it is set then prevent the switch to the null cipher */
-+
-+extern int tty_flag;
-+#endif
-
- /*
- * SSH2 key exchange
-@@ -153,13 +161,16 @@ order_hostkeyalgs(char *host, struct soc
- return ret;
- }
-
-+static char *myproposal[PROPOSAL_MAX];
-+static const char *myproposal_default[PROPOSAL_MAX] = { KEX_CLIENT };
- void
- ssh_kex2(char *host, struct sockaddr *hostaddr, u_short port)
- {
-- char *myproposal[PROPOSAL_MAX] = { KEX_CLIENT };
- struct kex *kex;
- int r;
-
-+ memcpy(&myproposal, &myproposal_default, sizeof(myproposal));
-+
- xxx_host = host;
- xxx_hostaddr = hostaddr;
-
-@@ -215,6 +226,10 @@ ssh_kex2(char *host, struct sockaddr *ho
- kex->server_version_string=server_version_string;
- kex->verify_host_key=&verify_host_key_callback;
-
-+#ifdef NONE_CIPHER_ENABLED
-+ xxx_kex = kex;
-+#endif
-+
- dispatch_run(DISPATCH_BLOCK, &kex->done, active_state);
-
- if (options.use_roaming && !kex->roaming) {
-@@ -416,6 +431,29 @@ ssh_userauth2(const char *local_user, co
- pubkey_cleanup(&authctxt);
- dispatch_range(SSH2_MSG_USERAUTH_MIN, SSH2_MSG_USERAUTH_MAX, NULL);
-
-+#ifdef NONE_CIPHER_ENABLED
-+ /*
-+ * if the user wants to use the none cipher do it
-+ * post authentication and only if the right conditions are met
-+ * both of the NONE commands must be true and there must be no
-+ * tty allocated.
-+ */
-+ if ((options.none_switch == 1) && (options.none_enabled == 1)) {
-+ if (!tty_flag) { /* no null on tty sessions */
-+ debug("Requesting none rekeying...");
-+ myproposal[PROPOSAL_ENC_ALGS_STOC] = "none";
-+ myproposal[PROPOSAL_ENC_ALGS_CTOS] = "none";
-+ kex_prop2buf(xxx_kex->my, myproposal);
-+ packet_request_rekeying();
-+ fprintf(stderr, "WARNING: ENABLED NONE CIPHER\n");
-+ } else {
-+ /* requested NONE cipher when in a tty */
-+ debug("Cannot switch to NONE cipher with tty allocated");
-+ fprintf(stderr, "NONE cipher switch disabled when a TTY is allocated\n");
-+ }
-+ }
-+#endif
-+
- debug("Authentication succeeded (%s).", authctxt.method->name);
- }
-
---- a/sshd.c 2015-10-24 04:53:18.000000000 +0200
-+++ b/sshd.c 2015-10-24 05:36:38.000000000 +0200
-@@ -431,8 +431,11 @@ sshd_exchange_identification(int sock_in
- minor = PROTOCOL_MINOR_1;
- }
-
-- xasprintf(&server_version_string, "SSH-%d.%d-%.100s%s%s%s",
-+ xasprintf(&server_version_string, "SSH-%d.%d-%.100s%s%s%s%s",
- major, minor, SSH_VERSION,
-+#ifdef HPN_ENABLED
-+ options.hpn_disabled ? "" : SSH_HPN,
-+#endif
- *options.version_addendum == '\0' ? "" : " ",
- options.version_addendum, newline);
-
-@@ -1162,6 +1165,10 @@ server_listen(void)
- int ret, listen_sock, on = 1;
- struct addrinfo *ai;
- char ntop[NI_MAXHOST], strport[NI_MAXSERV];
-+#ifdef HPN_ENABLED
-+ int socksize;
-+ socklen_t socksizelen = sizeof(socksize);
-+#endif
-
- for (ai = options.listen_addrs; ai; ai = ai->ai_next) {
- if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6)
-@@ -1202,6 +1209,13 @@ server_listen(void)
-
- debug("Bind to port %s on %s.", strport, ntop);
-
-+#ifdef HPN_ENABLED
-+ getsockopt(listen_sock, SOL_SOCKET, SO_RCVBUF,
-+ &socksize, &socksizelen);
-+ debug("Server TCP RWIN socket size: %d", socksize);
-+ debug("HPN Buffer Size: %d", options.hpn_buffer_size);
-+#endif
-+
- /* Bind the socket to the desired port. */
- if (bind(listen_sock, ai->ai_addr, ai->ai_addrlen) < 0) {
- error("Bind to port %s on %s failed: %.200s.",
-@@ -2152,6 +2166,11 @@ main(int ac, char **av)
- remote_ip, remote_port, laddr, get_local_port());
- free(laddr);
-
-+#ifdef HPN_ENABLED
-+ /* set the HPN options for the child */
-+ channel_set_hpn(options.hpn_disabled, options.hpn_buffer_size);
-+#endif
-+
- /*
- * We don't want to listen forever unless the other side
- * successfully authenticates itself. So we set up an alarm which is
-@@ -2555,6 +2574,14 @@ do_ssh2_kex(void)
- myproposal[PROPOSAL_MAC_ALGS_CTOS] =
- myproposal[PROPOSAL_MAC_ALGS_STOC] = options.macs;
-
-+#ifdef NONE_CIPHER_ENABLED
-+ if (options.none_enabled == 1) {
-+ debug ("WARNING: None cipher enabled");
-+ myproposal[PROPOSAL_ENC_ALGS_CTOS] =
-+ myproposal[PROPOSAL_ENC_ALGS_STOC] = compat_cipher_proposal(KEX_ENCRYPT_INCLUDE_NONE);
-+ }
-+#endif
-+
- if (options.compression == COMP_NONE) {
- myproposal[PROPOSAL_COMP_ALGS_CTOS] =
- myproposal[PROPOSAL_COMP_ALGS_STOC] = "none";
---- a/sshd_config 2015-10-24 04:53:18.000000000 +0200
-+++ b/sshd_config 2015-10-24 07:19:47.000000000 +0200
-@@ -125,6 +125,20 @@ UsePrivilegeSeparation sandbox # Defaul
- # override default of no subsystems
- Subsystem sftp /usr/libexec/sftp-server
-
-+# the following are HPN related configuration options
-+# tcp receive buffer polling. disable in non autotuning kernels
-+#TcpRcvBufPoll yes
-+
-+# disable hpn performance boosts
-+#HPNDisabled no
-+
-+# buffer size for hpn to non-hpn connections
-+#HPNBufferSize 2048
-+
-+
-+# allow the use of the none cipher
-+#NoneEnabled no
-+
- # Example of overriding settings on a per-user basis
- #Match User anoncvs
- # X11Forwarding no
---- a/version.h 2015-10-24 04:53:19.000000000 +0200
-+++ b/version.h 2015-10-24 05:07:02.000000000 +0200
-@@ -4,3 +4,4 @@
-
- #define SSH_PORTABLE "p1"
- #define SSH_RELEASE SSH_VERSION SSH_PORTABLE
-+#define SSH_HPN "-hpn14v5"
Copied: trunk/dports/net/openssh/files/openssh-7.1p2-hpnssh14v5.diff (from rev 144685, trunk/dports/net/openssh/files/openssh-7.1p1-hpnssh14v5.diff)
===================================================================
--- trunk/dports/net/openssh/files/openssh-7.1p2-hpnssh14v5.diff (rev 0)
+++ trunk/dports/net/openssh/files/openssh-7.1p2-hpnssh14v5.diff 2016-01-15 10:05:27 UTC (rev 144686)
@@ -0,0 +1,1292 @@
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ b/HPN-README 2015-10-24 07:22:39.000000000 +0200
+@@ -0,0 +1,129 @@
++Notes:
++
++MULTI-THREADED CIPHER:
++The AES cipher in CTR mode has been multithreaded (MTR-AES-CTR). This will allow ssh installations
++on hosts with multiple cores to use more than one processing core during encryption.
++Tests have show significant throughput performance increases when using MTR-AES-CTR up
++to and including a full gigabit per second on quad core systems. It should be possible to
++achieve full line rate on dual core systems but OS and data management overhead makes this
++more difficult to achieve. The cipher stream from MTR-AES-CTR is entirely compatible with single
++thread AES-CTR (ST-AES-CTR) implementations and should be 100% backward compatible. Optimal
++performance requires the MTR-AES-CTR mode be enabled on both ends of the connection.
++The MTR-AES-CTR replaces ST-AES-CTR and is used in exactly the same way with the same
++nomenclature.
++Use examples: ssh -caes128-ctr you at host.com
++ scp -oCipher=aes256-ctr file you at host.com:~/file
++
++NONE CIPHER:
++To use the NONE option you must have the NoneEnabled switch set on the server and
++you *must* have *both* NoneEnabled and NoneSwitch set to yes on the client. The NONE
++feature works with ALL ssh subsystems (as far as we can tell) *AS LONG AS* a tty is not
++spawned. If a user uses the -T switch to prevent a tty being created the NONE cipher will
++be disabled.
++
++The performance increase will only be as good as the network and TCP stack tuning
++on the receiver side of the connection allows. As a rule of thumb a user will need
++at least 10Mb/s connection with a 100ms RTT to see a doubling of performance. The
++HPN-SSH home page describes this in greater detail.
++
++http://www.psc.edu/networking/projects/hpn-ssh
++
++BUFFER SIZES:
++
++If HPN is disabled the receive buffer size will be set to the
++OpenSSH default of 64K.
++
++If an HPN system connects to a nonHPN system the receive buffer will
++be set to the HPNBufferSize value. The default is 2MB but user adjustable.
++
++If an HPN to HPN connection is established a number of different things might
++happen based on the user options and conditions.
++
++Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll enabled, TCPRcvBuf NOT Set
++HPN Buffer Size = up to 64MB
++This is the default state. The HPN buffer size will grow to a maximum of 64MB
++as the TCP receive buffer grows. The maximum HPN Buffer size of 64MB is
++geared towards 10GigE transcontinental connections.
++
++Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll disabled, TCPRcvBuf NOT Set
++HPN Buffer Size = TCP receive buffer value.
++Users on non-autotuning systesm should disable TCPRcvBufPoll in the
++ssh_cofig and sshd_config
++
++Conditions: HPNBufferSize SET, TCPRcvBufPoll disabled, TCPRcvBuf NOT Set
++HPN Buffer Size = minmum of TCP receive buffer and HPNBufferSize.
++This would be the system defined TCP receive buffer (RWIN).
++
++Conditions: HPNBufferSize SET, TCPRcvBufPoll disabled, TCPRcvBuf SET
++HPN Buffer Size = minmum of TCPRcvBuf and HPNBufferSize.
++Generally there is no need to set both.
++
++Conditions: HPNBufferSize SET, TCPRcvBufPoll enabled, TCPRcvBuf NOT Set
++HPN Buffer Size = grows to HPNBufferSize
++The buffer will grow up to the maximum size specified here.
++
++Conditions: HPNBufferSize SET, TCPRcvBufPoll enabled, TCPRcvBuf SET
++HPN Buffer Size = minmum of TCPRcvBuf and HPNBufferSize.
++Generally there is no need to set both of these, especially on autotuning
++systems. However, if the users wishes to override the autotuning this would be
++one way to do it.
++
++Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll enabled, TCPRcvBuf SET
++HPN Buffer Size = TCPRcvBuf.
++This will override autotuning and set the TCP recieve buffer to the user defined
++value.
++
++
++HPN Specific Configuration options
++
++TcpRcvBuf=[int]KB client
++ set the TCP socket receive buffer to n Kilobytes. It can be set up to the
++maximum socket size allowed by the system. This is useful in situations where
++the tcp receive window is set low but the maximum buffer size is set
++higher (as is typical). This works on a per TCP connection basis. You can also
++use this to artifically limit the transfer rate of the connection. In these
++cases the throughput will be no more than n/RTT. The minimum buffer size is 1KB.
++Default is the current system wide tcp receive buffer size.
++
++TcpRcvBufPoll=[yes/no] client/server
++ enable of disable the polling of the tcp receive buffer through the life
++of the connection. You would want to make sure that this option is enabled
++for systems making use of autotuning kernels (linux 2.4.24+, 2.6, MS Vista)
++default is yes.
++
++NoneEnabled=[yes/no] client/server
++ enable or disable the use of the None cipher. Care must always be used
++when enabling this as it will allow users to send data in the clear. However,
++it is important to note that authentication information remains encrypted
++even if this option is enabled. Set to no by default.
++
++NoneSwitch=[yes/no] client
++ Switch the encryption cipher being used to the None cipher after
++authentication takes place. NoneEnabled must be enabled on both the client
++and server side of the connection. When the connection switches to the NONE
++cipher a warning is sent to STDERR. The connection attempt will fail with an
++error if a client requests a NoneSwitch from the server that does not explicitly
++have NoneEnabled set to yes. Note: The NONE cipher cannot be used in
++interactive (shell) sessions and it will fail silently. Set to no by default.
++
++HPNDisabled=[yes/no] client/server
++ In some situations, such as transfers on a local area network, the impact
++of the HPN code produces a net decrease in performance. In these cases it is
++helpful to disable the HPN functionality. By default HPNDisabled is set to no.
++
++HPNBufferSize=[int]KB client/server
++ This is the default buffer size the HPN functionality uses when interacting
++with nonHPN SSH installations. Conceptually this is similar to the TcpRcvBuf
++option as applied to the internal SSH flow control. This value can range from
++1KB to 64MB (1-65536). Use of oversized or undersized buffers can cause performance
++problems depending on the length of the network path. The default size of this buffer
++is 2MB.
++
++
++Credits: This patch was conceived, designed, and led by Chris Rapier (rapier at psc.edu)
++ The majority of the actual coding for versions up to HPN12v1 was performed
++ by Michael Stevens (mstevens at andrew.cmu.edu). The MT-AES-CTR cipher was
++ implemented by Ben Bennet (ben at psc.edu) and improved by Mike Tasota
++ (tasota at gmail.com) an NSF REU grant recipient for 2013.
++ This work was financed, in part, by Cisco System, Inc., the National
++ Library of Medicine, and the National Science Foundation.
+--- a/channels.c 2015-10-24 04:53:18.000000000 +0200
++++ b/channels.c 2015-10-24 05:07:01.000000000 +0200
+@@ -186,6 +186,12 @@ static void port_open_helper(Channel *c,
+ static int connect_next(struct channel_connect *);
+ static void channel_connect_ctx_free(struct channel_connect *);
+
++
++#ifdef HPN_ENABLED
++static int hpn_disabled = 0;
++static int hpn_buffer_size = 2 * 1024 * 1024;
++#endif
++
+ /* -- channel core */
+
+ Channel *
+@@ -336,6 +342,9 @@ channel_new(char *ctype, int type, int r
+ c->local_window_max = window;
+ c->local_consumed = 0;
+ c->local_maxpacket = maxpack;
++#ifdef HPN_ENABLED
++ c->dynamic_window = 0;
++#endif
+ c->remote_id = -1;
+ c->remote_name = xstrdup(remote_name);
+ c->remote_window = 0;
+@@ -840,11 +849,41 @@ channel_pre_open_13(Channel *c, fd_set *
+ FD_SET(c->sock, writeset);
+ }
+
++#ifdef HPN_ENABLED
++static u_int
++channel_tcpwinsz(void)
++{
++ u_int32_t tcpwinsz = 0;
++ socklen_t optsz = sizeof(tcpwinsz);
++ int ret = -1;
++
++ /* if we aren't on a socket return 128KB */
++ if (!packet_connection_is_on_socket())
++ return (128*1024);
++ ret = getsockopt(packet_get_connection_in(),
++ SOL_SOCKET, SO_RCVBUF, &tcpwinsz, &optsz);
++ /* return no more than SSHBUF_SIZE_MAX */
++ if (ret == 0 && tcpwinsz > SSHBUF_SIZE_MAX)
++ tcpwinsz = SSHBUF_SIZE_MAX;
++ debug2("tcpwinsz: %d for connection: %d", tcpwinsz,
++ packet_get_connection_in());
++ return (tcpwinsz);
++}
++#endif
++
+ static void
+ channel_pre_open(Channel *c, fd_set *readset, fd_set *writeset)
+ {
+ u_int limit = compat20 ? c->remote_window : packet_get_maxsize();
+
++#ifdef HPN_ENABLED
++ /* check buffer limits */
++ if (!c->tcpwinsz || c->dynamic_window > 0)
++ c->tcpwinsz = channel_tcpwinsz();
++
++ limit = MIN(limit, 2 * c->tcpwinsz);
++#endif
++
+ if (c->istate == CHAN_INPUT_OPEN &&
+ limit > 0 &&
+ buffer_len(&c->input) < limit &&
+@@ -1862,6 +1901,20 @@ channel_check_window(Channel *c)
+ c->local_maxpacket*3) ||
+ c->local_window < c->local_window_max/2) &&
+ c->local_consumed > 0) {
++#ifdef HPN_ENABLED
++ /* adjust max window size if we are in a dynamic environment */
++ if (c->dynamic_window && (c->tcpwinsz > c->local_window_max)) {
++ u_int addition = 0;
++
++ /*
++ * grow the window somewhat aggressively to maintain
++ * pressure
++ */
++ addition = 1.5*(c->tcpwinsz - c->local_window_max);
++ c->local_window_max += addition;
++ c->local_consumed += addition;
++ }
++#endif
+ packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
+ packet_put_int(c->remote_id);
+ packet_put_int(c->local_consumed);
+@@ -2813,6 +2866,17 @@ channel_fwd_bind_addr(const char *listen
+ return addr;
+ }
+
++#ifdef HPN_ENABLED
++void
++channel_set_hpn(int external_hpn_disabled, int external_hpn_buffer_size)
++{
++ hpn_disabled = external_hpn_disabled;
++ hpn_buffer_size = external_hpn_buffer_size;
++ debug("HPN Disabled: %d, HPN Buffer Size: %d", hpn_disabled,
++ hpn_buffer_size);
++}
++#endif
++
+ static int
+ channel_setup_fwd_listener_tcpip(int type, struct Forward *fwd,
+ int *allocated_listen_port, struct ForwardOptions *fwd_opts)
+@@ -2941,6 +3005,17 @@ channel_setup_fwd_listener_tcpip(int typ
+ }
+
+ /* Allocate a channel number for the socket. */
++#ifdef HPN_ENABLED
++ /*
++ * explicitly test for hpn disabled option. if true use smaller
++ * window size.
++ */
++ if (!hpn_disabled)
++ c = channel_new("port listener", type, sock, sock, -1,
++ hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT,
++ 0, "port listener", 1);
++ else
++#endif
+ c = channel_new("port listener", type, sock, sock, -1,
+ CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT,
+ 0, "port listener", 1);
+@@ -3975,6 +4050,14 @@ x11_create_display_inet(int x11_display_
+ *chanids = xcalloc(num_socks + 1, sizeof(**chanids));
+ for (n = 0; n < num_socks; n++) {
+ sock = socks[n];
++#ifdef HPN_ENABLED
++ if (!hpn_disabled)
++ nc = channel_new("x11 listener",
++ SSH_CHANNEL_X11_LISTENER, sock, sock, -1,
++ hpn_buffer_size, CHAN_X11_PACKET_DEFAULT,
++ 0, "X11 inet listener", 1);
++ else
++#endif
+ nc = channel_new("x11 listener",
+ SSH_CHANNEL_X11_LISTENER, sock, sock, -1,
+ CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT,
+--- a/channels.h 2015-10-24 04:53:18.000000000 +0200
++++ b/channels.h 2015-10-24 05:07:01.000000000 +0200
+@@ -136,6 +136,10 @@ struct Channel {
+ u_int local_maxpacket;
+ int extended_usage;
+ int single_connection;
++#ifdef HPN_ENABLED
++ int dynamic_window;
++ u_int tcpwinsz;
++#endif
+
+ char *ctype; /* type */
+
+@@ -312,4 +316,9 @@ void chan_rcvd_ieof(Channel *);
+ void chan_write_failed(Channel *);
+ void chan_obuf_empty(Channel *);
+
++#ifdef HPN_ENABLED
++/* hpn handler */
++void channel_set_hpn(int, int);
++#endif
++
+ #endif
+--- a/cipher.c 2015-10-24 04:53:18.000000000 +0200
++++ b/cipher.c 2015-10-24 05:07:01.000000000 +0200
+@@ -244,7 +244,13 @@ ciphers_valid(const char *names)
+ for ((p = strsep(&cp, CIPHER_SEP)); p && *p != '\0';
+ (p = strsep(&cp, CIPHER_SEP))) {
+ c = cipher_by_name(p);
+- if (c == NULL || c->number != SSH_CIPHER_SSH2) {
++ if (c == NULL || (c->number != SSH_CIPHER_SSH2 &&
++#ifdef NONE_CIPHER_ENABLED
++ c->number != SSH_CIPHER_NONE
++#else
++ 1
++#endif
++ )) {
+ free(cipher_list);
+ return 0;
+ }
+@@ -545,6 +551,9 @@ cipher_get_keyiv(struct sshcipher_ctx *c
+
+ switch (c->number) {
+ #ifdef WITH_OPENSSL
++#ifdef NONE_CIPHER_ENABLED
++ case SSH_CIPHER_NONE:
++#endif
+ case SSH_CIPHER_SSH2:
+ case SSH_CIPHER_DES:
+ case SSH_CIPHER_BLOWFISH:
+@@ -593,6 +602,9 @@ cipher_set_keyiv(struct sshcipher_ctx *c
+
+ switch (c->number) {
+ #ifdef WITH_OPENSSL
++#ifdef NONE_CIPHER_ENABLED
++ case SSH_CIPHER_NONE:
++#endif
+ case SSH_CIPHER_SSH2:
+ case SSH_CIPHER_DES:
+ case SSH_CIPHER_BLOWFISH:
+--- a/clientloop.c 2015-10-24 04:53:18.000000000 +0200
++++ b/clientloop.c 2015-10-24 05:07:01.000000000 +0200
+@@ -1957,6 +1957,15 @@ client_request_x11(const char *request_t
+ sock = x11_connect_display();
+ if (sock < 0)
+ return NULL;
++#ifdef HPN_ENABLED
++ /* again is this really necessary for X11? */
++ if (!options.hpn_disabled)
++ c = channel_new("x11",
++ SSH_CHANNEL_X11_OPEN, sock, sock, -1,
++ options.hpn_buffer_size,
++ CHAN_X11_PACKET_DEFAULT, 0, "x11", 1);
++ else
++#endif
+ c = channel_new("x11",
+ SSH_CHANNEL_X11_OPEN, sock, sock, -1,
+ CHAN_TCP_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 0, "x11", 1);
+@@ -1982,6 +1991,14 @@ client_request_agent(const char *request
+ __func__, ssh_err(r));
+ return NULL;
+ }
++#ifdef HPN_ENABLED
++ if (!options.hpn_disabled)
++ c = channel_new("authentication agent connection",
++ SSH_CHANNEL_OPEN, sock, sock, -1,
++ options.hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT, 0,
++ "authentication agent connection", 1);
++ else
++#endif
+ c = channel_new("authentication agent connection",
+ SSH_CHANNEL_OPEN, sock, sock, -1,
+ CHAN_X11_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0,
+@@ -2012,6 +2029,12 @@ client_request_tun_fwd(int tun_mode, int
+ return -1;
+ }
+
++#ifdef HPN_ENABLED
++ if (!options.hpn_disabled)
++ c = channel_new("tun", SSH_CHANNEL_OPENING, fd, fd, -1,
++ options.hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
++ else
++#endif
+ c = channel_new("tun", SSH_CHANNEL_OPENING, fd, fd, -1,
+ CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
+ c->datagram = 1;
+--- a/compat.c 2015-10-24 04:53:18.000000000 +0200
++++ b/compat.c 2015-10-24 05:07:02.000000000 +0200
+@@ -210,6 +210,14 @@ compat_datafellows(const char *version)
+ debug("match: %s pat %s compat 0x%08x",
+ version, check[i].pat, check[i].bugs);
+ datafellows = check[i].bugs; /* XXX for now */
++#ifdef HPN_ENABLED
++ /* Check to see if the remote side is OpenSSH and not HPN */
++ if (strstr(version,"OpenSSH") != NULL &&
++ strstr(version,"hpn") == NULL) {
++ datafellows |= SSH_BUG_LARGEWINDOW;
++ debug("Remote is NON-HPN aware");
++ }
++#endif
+ return check[i].bugs;
+ }
+ }
+--- a/compat.h 2015-10-24 04:53:18.000000000 +0200
++++ b/compat.h 2015-10-24 06:01:31.000000000 +0200
+@@ -62,6 +62,9 @@
+ #define SSH_BUG_CURVE25519PAD 0x10000000
+ #define SSH_BUG_HOSTKEYS 0x20000000
+ #define SSH_BUG_DHGEX_LARGE 0x40000000
++#ifdef HPN_ENABLED
++#define SSH_BUG_LARGEWINDOW 0x80000000
++#endif
+
+ void enable_compat13(void);
+ void enable_compat20(void);
+--- a/configure.ac 2015-10-24 04:53:18.000000000 +0200
++++ b/configure.ac 2015-10-24 05:07:02.000000000 +0200
+@@ -4271,6 +4271,25 @@ AC_ARG_WITH([maildir],
+ ]
+ ) # maildir
+
++#check whether user wants HPN support
++HPN_MSG="no"
++AC_ARG_WITH(hpn,
++ [ --with-hpn Enable HPN support],
++ [ if test "x$withval" != "xno" ; then
++ AC_DEFINE(HPN_ENABLED,1,[Define if you want HPN support.])
++ HPN_MSG="yes"
++ fi ]
++)
++#check whether user wants NONECIPHER support
++NONECIPHER_MSG="no"
++AC_ARG_WITH(nonecipher,
++ [ --with-nonecipher Enable NONECIPHER support],
++ [ if test "x$withval" != "xno" ; then
++ AC_DEFINE(NONE_CIPHER_ENABLED,1,[Define if you want NONECIPHER support.])
++ NONECIPHER_MSG="yes"
++ fi ]
++)
++
+ if test ! -z "$cross_compiling" && test "x$cross_compiling" = "xyes"; then
+ AC_MSG_WARN([cross compiling: Disabling /dev/ptmx test])
+ disable_ptmx_check=yes
+@@ -4938,6 +4957,8 @@ echo " Translate v4 in v6 hack
+ echo " BSD Auth support: $BSD_AUTH_MSG"
+ echo " Random number source: $RAND_MSG"
+ echo " Privsep sandbox style: $SANDBOX_STYLE"
++echo " HPN support: $HPN_MSG"
++echo " NONECIPHER support: $NONECIPHER_MSG"
+
+ echo ""
+
+--- a/kex.c 2015-10-24 04:53:18.000000000 +0200
++++ b/kex.c 2015-10-24 05:19:11.000000000 +0200
+@@ -652,6 +652,13 @@ kex_choose_conf(struct ssh *ssh)
+ int nenc, nmac, ncomp;
+ u_int mode, ctos, need, dh_need, authlen;
+ int r, first_kex_follows;
++#ifdef NONE_CIPHER_ENABLED
++ /* XXX: Could this move into the lower block? */
++ int auth_flag;
++
++ auth_flag = ssh_packet_authentication_state(ssh);
++ debug ("AUTH STATE IS %d", auth_flag);
++#endif
+
+ if ((r = kex_buf2prop(kex->my, NULL, &my)) != 0 ||
+ (r = kex_buf2prop(kex->peer, &first_kex_follows, &peer)) != 0)
+@@ -709,6 +716,17 @@ kex_choose_conf(struct ssh *ssh)
+ peer[ncomp] = NULL;
+ goto out;
+ }
++#ifdef NONE_CIPHER_ENABLED
++ debug("REQUESTED ENC.NAME is '%s'", newkeys->enc.name);
++ if (strcmp(newkeys->enc.name, "none") == 0) {
++ debug("Requesting NONE. Authflag is %d", auth_flag);
++ if (auth_flag == 1) {
++ debug("None requested post authentication.");
++ } else {
++ fatal("Pre-authentication none cipher requests are not allowed.");
++ }
++ }
++#endif
+ debug("kex: %s %s %s %s",
+ ctos ? "client->server" : "server->client",
+ newkeys->enc.name,
+--- a/myproposal.h 2015-10-24 04:53:18.000000000 +0200
++++ b/myproposal.h 2015-10-24 05:07:02.000000000 +0200
+@@ -169,6 +169,10 @@
+ #define KEX_DEFAULT_COMP "none,zlib at openssh.com,zlib"
+ #define KEX_DEFAULT_LANG ""
+
++#ifdef NONE_CIPHER_ENABLED
++#define KEX_ENCRYPT_INCLUDE_NONE KEX_SERVER_ENCRYPT ",none"
++#endif
++
+ #define KEX_CLIENT \
+ KEX_CLIENT_KEX, \
+ KEX_DEFAULT_PK_ALG, \
+--- a/packet.c 2015-10-24 04:53:18.000000000 +0200
++++ b/packet.c 2015-10-24 05:07:02.000000000 +0200
+@@ -2228,6 +2228,24 @@ ssh_packet_send_ignore(struct ssh *ssh,
+ }
+ }
+
++#ifdef NONE_CIPHER_ENABLED
++/* this supports the forced rekeying required for the NONE cipher */
++int rekey_requested = 0;
++void
++packet_request_rekeying(void)
++{
++ rekey_requested = 1;
++}
++
++int
++ssh_packet_authentication_state(struct ssh *ssh)
++{
++ struct session_state *state = ssh->state;
++
++ return(state->after_authentication);
++}
++#endif
++
+ #define MAX_PACKETS (1U<<31)
+ int
+ ssh_packet_need_rekeying(struct ssh *ssh)
+@@ -2236,6 +2254,12 @@ ssh_packet_need_rekeying(struct ssh *ssh
+
+ if (ssh->compat & SSH_BUG_NOREKEY)
+ return 0;
++#ifdef NONE_CIPHER_ENABLED
++ if (rekey_requested == 1) {
++ rekey_requested = 0;
++ return 1;
++ }
++#endif
+ return
+ (state->p_send.packets > MAX_PACKETS) ||
+ (state->p_read.packets > MAX_PACKETS) ||
+--- a/packet.h 2015-10-24 04:53:18.000000000 +0200
++++ b/packet.h 2015-10-24 05:07:02.000000000 +0200
+@@ -188,6 +188,11 @@ int sshpkt_get_bignum2(struct ssh *ssh,
+ int sshpkt_get_end(struct ssh *ssh);
+ const u_char *sshpkt_ptr(struct ssh *, size_t *lenp);
+
++#ifdef NONE_CIPHER_ENABLED
++void packet_request_rekeying(void);
++int ssh_packet_authentication_state(struct ssh *ssh);
++#endif
++
+ /* OLD API */
+ extern struct ssh *active_state;
+ #include "opacket.h"
+--- a/readconf.c 2015-10-24 04:53:18.000000000 +0200
++++ b/readconf.c 2015-10-24 06:10:34.000000000 +0200
+@@ -153,6 +153,12 @@ typedef enum {
+ oTunnel, oTunnelDevice, oLocalCommand, oPermitLocalCommand,
+ oVisualHostKey, oUseRoaming,
+ oKexAlgorithms, oIPQoS, oRequestTTY, oIgnoreUnknown, oProxyUseFdpass,
++#ifdef HPN_ENABLED
++ oHPNDisabled, oHPNBufferSize, oTcpRcvBufPoll, oTcpRcvBuf,
++#endif
++#ifdef NONE_CIPHER_ENABLED
++ oNoneSwitch, oNoneEnabled,
++#endif
+ oCanonicalDomains, oCanonicalizeHostname, oCanonicalizeMaxDots,
+ oCanonicalizeFallbackLocal, oCanonicalizePermittedCNAMEs,
+ oStreamLocalBindMask, oStreamLocalBindUnlink, oRevokedHostKeys,
+@@ -277,6 +283,16 @@ static struct {
+ { "updatehostkeys", oUpdateHostkeys },
+ { "hostbasedkeytypes", oHostbasedKeyTypes },
+ { "pubkeyacceptedkeytypes", oPubkeyAcceptedKeyTypes },
++#ifdef NONE_CIPHER_ENABLED
++ { "noneenabled", oNoneEnabled },
++ { "noneswitch", oNoneSwitch },
++#endif
++#ifdef HPN_ENABLED
++ { "tcprcvbufpoll", oTcpRcvBufPoll },
++ { "tcprcvbuf", oTcpRcvBuf },
++ { "hpndisabled", oHPNDisabled },
++ { "hpnbuffersize", oHPNBufferSize },
++#endif
+ { "ignoreunknown", oIgnoreUnknown },
+
+ { NULL, oBadOption }
+@@ -906,6 +922,44 @@ parse_time:
+ intptr = &options->check_host_ip;
+ goto parse_flag;
+
++#ifdef HPN_ENABLED
++ case oHPNDisabled:
++ intptr = &options->hpn_disabled;
++ goto parse_flag;
++
++ case oHPNBufferSize:
++ intptr = &options->hpn_buffer_size;
++ goto parse_int;
++
++ case oTcpRcvBufPoll:
++ intptr = &options->tcp_rcv_buf_poll;
++ goto parse_flag;
++
++ case oTcpRcvBuf:
++ intptr = &options->tcp_rcv_buf;
++ goto parse_int;
++#endif
++
++#ifdef NONE_CIPHER_ENABLED
++ case oNoneEnabled:
++ intptr = &options->none_enabled;
++ goto parse_flag;
++
++ /* we check to see if the command comes from the */
++ /* command line or not. If it does then enable it */
++ /* otherwise fail. NONE should never be a default configuration */
++ case oNoneSwitch:
++ if(strcmp(filename,"command-line") == 0) {
++ intptr = &options->none_switch;
++ goto parse_flag;
++ } else {
++ error("NoneSwitch is found in %.200s.\nYou may only use this configuration option from the command line", filename);
++ error("Continuing...");
++ debug("NoneSwitch directive found in %.200s.", filename);
++ return 0;
++ }
++#endif
++
+ case oVerifyHostKeyDNS:
+ intptr = &options->verify_host_key_dns;
+ multistate_ptr = multistate_yesnoask;
+@@ -1665,6 +1719,16 @@ initialize_options(Options * options)
+ options->ip_qos_interactive = -1;
+ options->ip_qos_bulk = -1;
+ options->request_tty = -1;
++#ifdef NONE_CIPHER_ENABLED
++ options->none_switch = -1;
++ options->none_enabled = -1;
++#endif
++#ifdef HPN_ENABLED
++ options->hpn_disabled = -1;
++ options->hpn_buffer_size = -1;
++ options->tcp_rcv_buf_poll = -1;
++ options->tcp_rcv_buf = -1;
++#endif
+ options->proxy_use_fdpass = -1;
+ options->ignored_unknown = NULL;
+ options->num_canonical_domains = 0;
+@@ -1817,6 +1881,35 @@ fill_default_options(Options * options)
+ options->server_alive_interval = 0;
+ if (options->server_alive_count_max == -1)
+ options->server_alive_count_max = 3;
++#ifdef NONE_CIPHER_ENABLED
++ if (options->none_switch == -1)
++ options->none_switch = 0;
++ if (options->none_enabled == -1)
++ options->none_enabled = 0;
++#endif
++#ifdef HPN_ENABLED
++ if (options->hpn_disabled == -1)
++ options->hpn_disabled = 0;
++ if (options->hpn_buffer_size > -1) {
++ /* if a user tries to set the size to 0 set it to 1KB */
++ if (options->hpn_buffer_size == 0)
++ options->hpn_buffer_size = 1;
++ /* limit the buffer to 64MB */
++ if (options->hpn_buffer_size > 64*1024) {
++ options->hpn_buffer_size = 64*1024*1024;
++ debug("User requested buffer larger than 64MB. Request"
++ " reverted to 64MB");
++ } else
++ options->hpn_buffer_size *= 1024;
++ debug("hpn_buffer_size set to %d", options->hpn_buffer_size);
++ }
++ if (options->tcp_rcv_buf == 0)
++ options->tcp_rcv_buf = 1;
++ if (options->tcp_rcv_buf > -1)
++ options->tcp_rcv_buf *=1024;
++ if (options->tcp_rcv_buf_poll == -1)
++ options->tcp_rcv_buf_poll = 1;
++#endif
+ if (options->control_master == -1)
+ options->control_master = 0;
+ if (options->control_persist == -1) {
+--- a/readconf.h 2015-10-24 04:53:18.000000000 +0200
++++ b/readconf.h 2015-10-24 06:17:07.000000000 +0200
+@@ -105,6 +105,16 @@ typedef struct {
+ int clear_forwardings;
+
+ int enable_ssh_keysign;
++#ifdef NONE_CIPHER_ENABLED
++ int none_switch; /* Use none cipher */
++ int none_enabled; /* Allow none to be used */
++#endif
++#ifdef HPN_ENABLED
++ int tcp_rcv_buf; /* user switch to set tcp recv buffer */
++ int tcp_rcv_buf_poll; /* Option to poll recv buf every window transfer */
++ int hpn_disabled; /* Switch to disable HPN buffer management */
++ int hpn_buffer_size; /* User definable size for HPN buffer window */
++#endif
+ int64_t rekey_limit;
+ int rekey_interval;
+ int no_host_authentication_for_localhost;
+--- a/scp.c 2015-10-24 04:53:18.000000000 +0200
++++ b/scp.c 2015-10-24 05:07:02.000000000 +0200
+@@ -750,7 +750,7 @@ source(int argc, char **argv)
+ off_t i, statbytes;
+ size_t amt, nr;
+ int fd = -1, haderr, indx;
+- char *last, *name, buf[2048], encname[PATH_MAX];
++ char *last, *name, buf[16384], encname[PATH_MAX];
+ int len;
+
+ for (indx = 0; indx < argc; ++indx) {
+@@ -919,7 +919,7 @@ sink(int argc, char **argv)
+ off_t size, statbytes;
+ unsigned long long ull;
+ int setimes, targisdir, wrerrno = 0;
+- char ch, *cp, *np, *targ, *why, *vect[1], buf[2048];
++ char ch, *cp, *np, *targ, *why, *vect[1], buf[16384];
+ struct timeval tv[2];
+
+ #define atime tv[0]
+--- a/servconf.c 2015-10-24 04:53:18.000000000 +0200
++++ b/servconf.c 2015-10-24 06:21:38.000000000 +0200
+@@ -165,6 +165,14 @@ initialize_server_options(ServerOptions
+ options->authorized_principals_file = NULL;
+ options->authorized_principals_command = NULL;
+ options->authorized_principals_command_user = NULL;
++#ifdef NONE_CIPHER_ENABLED
++ options->none_enabled = -1;
++#endif
++#ifdef HPN_ENABLED
++ options->tcp_rcv_buf_poll = -1;
++ options->hpn_disabled = -1;
++ options->hpn_buffer_size = -1;
++#endif
+ options->ip_qos_interactive = -1;
+ options->ip_qos_bulk = -1;
+ options->version_addendum = NULL;
+@@ -329,6 +337,57 @@ fill_default_server_options(ServerOption
+ }
+ if (options->permit_tun == -1)
+ options->permit_tun = SSH_TUNMODE_NO;
++#ifdef NONE_CIPHER_ENABLED
++ if (options->none_enabled == -1)
++ options->none_enabled = 0;
++#endif
++#ifdef HPN_ENABLED
++ if (options->hpn_disabled == -1)
++ options->hpn_disabled = 0;
++
++ if (options->hpn_buffer_size == -1) {
++ /*
++ * option not explicitly set. Now we have to figure out
++ * what value to use.
++ */
++ if (options->hpn_disabled == 1) {
++ options->hpn_buffer_size = CHAN_SES_WINDOW_DEFAULT;
++ } else {
++ int sock, socksize;
++ socklen_t socksizelen = sizeof(socksize);
++
++ /*
++ * get the current RCV size and set it to that
++ * create a socket but don't connect it
++ * we use that the get the rcv socket size
++ */
++ sock = socket(AF_INET, SOCK_STREAM, 0);
++ getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
++ &socksize, &socksizelen);
++ close(sock);
++ options->hpn_buffer_size = socksize;
++ debug ("HPN Buffer Size: %d", options->hpn_buffer_size);
++ }
++ } else {
++ /*
++ * we have to do this incase the user sets both values in a
++ * contradictory manner. hpn_disabled overrrides
++ * hpn_buffer_size
++ */
++ if (options->hpn_disabled <= 0) {
++ if (options->hpn_buffer_size == 0)
++ options->hpn_buffer_size = 1;
++ /* limit the maximum buffer to 64MB */
++ if (options->hpn_buffer_size > 64*1024) {
++ options->hpn_buffer_size = 64*1024*1024;
++ } else {
++ options->hpn_buffer_size *= 1024;
++ }
++ } else
++ options->hpn_buffer_size = CHAN_TCP_WINDOW_DEFAULT;
++ }
++#endif
++
+ if (options->ip_qos_interactive == -1)
+ options->ip_qos_interactive = IPTOS_LOWDELAY;
+ if (options->ip_qos_bulk == -1)
+@@ -418,6 +477,12 @@ typedef enum {
+ sHostCertificate,
+ sRevokedKeys, sTrustedUserCAKeys, sAuthorizedPrincipalsFile,
+ sAuthorizedPrincipalsCommand, sAuthorizedPrincipalsCommandUser,
++#ifdef NONE_CIPHER_ENABLED
++ sNoneEnabled,
++#endif
++#ifdef HPN_ENABLED
++ sTcpRcvBufPoll, sHPNDisabled, sHPNBufferSize,
++#endif
+ sKexAlgorithms, sIPQoS, sVersionAddendum,
+ sAuthorizedKeysCommand, sAuthorizedKeysCommandUser,
+ sAuthenticationMethods, sHostKeyAgent, sPermitUserRC,
+@@ -549,6 +614,14 @@ static struct {
+ { "revokedkeys", sRevokedKeys, SSHCFG_ALL },
+ { "trustedusercakeys", sTrustedUserCAKeys, SSHCFG_ALL },
+ { "authorizedprincipalsfile", sAuthorizedPrincipalsFile, SSHCFG_ALL },
++#ifdef NONE_CIPHER_ENABLED
++ { "noneenabled", sNoneEnabled, SSHCFG_ALL },
++#endif
++#ifdef HPN_ENABLED
++ { "hpndisabled", sHPNDisabled, SSHCFG_ALL },
++ { "hpnbuffersize", sHPNBufferSize, SSHCFG_ALL },
++ { "tcprcvbufpoll", sTcpRcvBufPoll, SSHCFG_ALL },
++#endif
+ { "kexalgorithms", sKexAlgorithms, SSHCFG_GLOBAL },
+ { "ipqos", sIPQoS, SSHCFG_ALL },
+ { "authorizedkeyscommand", sAuthorizedKeysCommand, SSHCFG_ALL },
+@@ -1169,6 +1242,25 @@ process_server_config_line(ServerOptions
+ intptr = &options->ignore_user_known_hosts;
+ goto parse_flag;
+
++#ifdef NONE_CIPHER_ENABLED
++ case sNoneEnabled:
++ intptr = &options->none_enabled;
++ goto parse_flag;
++#endif
++#ifdef HPN_ENABLED
++ case sTcpRcvBufPoll:
++ intptr = &options->tcp_rcv_buf_poll;
++ goto parse_flag;
++
++ case sHPNDisabled:
++ intptr = &options->hpn_disabled;
++ goto parse_flag;
++
++ case sHPNBufferSize:
++ intptr = &options->hpn_buffer_size;
++ goto parse_int;
++#endif
++
+ case sRhostsRSAAuthentication:
+ intptr = &options->rhosts_rsa_authentication;
+ goto parse_flag;
+--- a/servconf.h 2015-10-24 04:53:18.000000000 +0200
++++ b/servconf.h 2015-10-24 07:22:48.000000000 +0200
+@@ -173,6 +173,15 @@ typedef struct {
+
+ int use_pam; /* Enable auth via PAM */
+
++#ifdef NONE_CIPHER_ENABLED
++ int none_enabled; /* enable NONE cipher switch */
++#endif
++#ifdef HPN_ENABLED
++ int tcp_rcv_buf_poll; /* poll tcp rcv window in autotuning kernels*/
++ int hpn_disabled; /* disable hpn functionality. false by default */
++ int hpn_buffer_size; /* set the hpn buffer size - default 3MB */
++#endif
++
+ int permit_tun;
+
+ int num_permitted_opens;
+--- a/serverloop.c 2015-10-24 04:53:18.000000000 +0200
++++ b/serverloop.c 2015-10-24 05:07:02.000000000 +0200
+@@ -1051,6 +1051,12 @@ server_request_tun(void)
+ sock = tun_open(tun, mode);
+ if (sock < 0)
+ goto done;
++#ifdef HPN_ENABLED
++ if (!options.hpn_disabled)
++ c = channel_new("tun", SSH_CHANNEL_OPEN, sock, sock, -1,
++ options.hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
++ else
++#endif
+ c = channel_new("tun", SSH_CHANNEL_OPEN, sock, sock, -1,
+ CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
+ c->datagram = 1;
+@@ -1088,6 +1094,10 @@ server_request_session(void)
+ c = channel_new("session", SSH_CHANNEL_LARVAL,
+ -1, -1, -1, /*window size*/0, CHAN_SES_PACKET_DEFAULT,
+ 0, "server-session", 1);
++#ifdef HPN_ENABLED
++ if (options.tcp_rcv_buf_poll && !options.hpn_disabled)
++ c->dynamic_window = 1;
++#endif
+ if (session_open(the_authctxt, c->self) != 1) {
+ debug("session open failed, free channel %d", c->self);
+ channel_free(c);
+--- a/session.c 2015-10-24 04:53:18.000000000 +0200
++++ b/session.c 2015-10-24 05:07:02.000000000 +0200
+@@ -2329,6 +2329,14 @@ session_set_fds(Session *s, int fdin, in
+ */
+ if (s->chanid == -1)
+ fatal("no channel for session %d", s->self);
++#ifdef HPN_ENABLED
++ if (!options.hpn_disabled)
++ channel_set_fds(s->chanid,
++ fdout, fdin, fderr,
++ ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
++ 1, is_tty, options.hpn_buffer_size);
++ else
++#endif
+ channel_set_fds(s->chanid,
+ fdout, fdin, fderr,
+ ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
+--- a/sftp.1 2015-10-24 04:53:18.000000000 +0200
++++ b/sftp.1 2015-10-24 05:07:02.000000000 +0200
+@@ -263,7 +263,8 @@ diagnostic messages from
+ Specify how many requests may be outstanding at any one time.
+ Increasing this may slightly improve file transfer speed
+ but will increase memory usage.
+-The default is 64 outstanding requests.
++The default is 256 outstanding requests providing for 8MB
++of outstanding data with a 32KB buffer.
+ .It Fl r
+ Recursively copy entire directories when uploading and downloading.
+ Note that
+--- a/sftp.c 2015-10-24 04:53:18.000000000 +0200
++++ b/sftp.c 2015-10-24 05:07:02.000000000 +0200
+@@ -71,7 +71,11 @@ typedef void EditLine;
+ #include "sftp-client.h"
+
+ #define DEFAULT_COPY_BUFLEN 32768 /* Size of buffer for up/download */
++#ifdef HPN_ENABLED
++#define DEFAULT_NUM_REQUESTS 256 /* # concurrent outstanding requests */
++#else
+ #define DEFAULT_NUM_REQUESTS 64 /* # concurrent outstanding requests */
++#endif
+
+ /* File to read commands from */
+ FILE* infile;
+--- a/ssh.c 2015-10-24 04:53:18.000000000 +0200
++++ b/ssh.c 2015-10-24 05:07:02.000000000 +0200
+@@ -884,6 +884,14 @@ main(int ac, char **av)
+ break;
+ case 'T':
+ options.request_tty = REQUEST_TTY_NO;
++#ifdef NONE_CIPHER_ENABLED
++ /*
++ * ensure that the user doesn't try to backdoor a
++ * null cipher switch on an interactive session
++ * so explicitly disable it no matter what.
++ */
++ options.none_switch = 0;
++#endif
+ break;
+ case 'o':
+ line = xstrdup(optarg);
+@@ -1834,9 +1842,85 @@ ssh_session2_open(void)
+ if (!isatty(err))
+ set_nonblock(err);
+
++#ifdef HPN_ENABLED
++ /*
++ * we need to check to see if what they want to do about buffer
++ * sizes here. In a hpn to nonhpn connection we want to limit
++ * the window size to something reasonable in case the far side
++ * has the large window bug. In hpn to hpn connection we want to
++ * use the max window size but allow the user to override it
++ * lastly if they disabled hpn then use the ssh std window size
++
++ * so why don't we just do a getsockopt() here and set the
++ * ssh window to that? In the case of a autotuning receive
++ * window the window would get stuck at the initial buffer
++ * size generally less than 96k. Therefore we need to set the
++ * maximum ssh window size to the maximum hpn buffer size
++ * unless the user has specifically set the tcprcvbufpoll
++ * to no. In which case we *can* just set the window to the
++ * minimum of the hpn buffer size and tcp receive buffer size
++ */
++
++ if (tty_flag)
++ options.hpn_buffer_size = CHAN_SES_WINDOW_DEFAULT;
++ else
++ options.hpn_buffer_size = 2*1024*1024;
++
++ if (datafellows & SSH_BUG_LARGEWINDOW) {
++ debug("HPN to Non-HPN Connection");
++ } else {
++ int sock, socksize;
++ socklen_t socksizelen = sizeof(socksize);
++
++ if (options.tcp_rcv_buf_poll <= 0) {
++ sock = socket(AF_INET, SOCK_STREAM, 0);
++ getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
++ &socksize, &socksizelen);
++ close(sock);
++ debug("socksize %d", socksize);
++ options.hpn_buffer_size = socksize;
++ debug ("HPNBufferSize set to TCP RWIN: %d",
++ options.hpn_buffer_size);
++ } else {
++ if (options.tcp_rcv_buf > 0) {
++ /*
++ * create a socket but don't connect it.
++ * we use that the get the rcv socket size
++ */
++ sock = socket(AF_INET, SOCK_STREAM, 0);
++ /*
++ * if they are using the tcp_rcv_buf option
++ * attempt to set the buffer size to that
++ */
++ if (options.tcp_rcv_buf)
++ setsockopt(sock, SOL_SOCKET, SO_RCVBUF,
++ (void *)&options.tcp_rcv_buf,
++ sizeof(options.tcp_rcv_buf));
++ getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
++ &socksize, &socksizelen);
++ close(sock);
++ debug("socksize %d", socksize);
++ options.hpn_buffer_size = socksize;
++ debug ("HPNBufferSize set to user TCPRcvBuf: "
++ "%d", options.hpn_buffer_size);
++ }
++ }
++ }
++
++ debug("Final hpn_buffer_size = %d", options.hpn_buffer_size);
++
++ window = options.hpn_buffer_size;
++
++ channel_set_hpn(options.hpn_disabled, options.hpn_buffer_size);
++#else
+ window = CHAN_SES_WINDOW_DEFAULT;
++#endif
++
+ packetmax = CHAN_SES_PACKET_DEFAULT;
+ if (tty_flag) {
++#ifdef HPN_ENABLED
++ window = CHAN_SES_WINDOW_DEFAULT;
++#endif
+ window >>= 1;
+ packetmax >>= 1;
+ }
+@@ -1845,6 +1929,12 @@ ssh_session2_open(void)
+ window, packetmax, CHAN_EXTENDED_WRITE,
+ "client-session", /*nonblock*/0);
+
++#ifdef HPN_ENABLED
++ if (options.tcp_rcv_buf_poll > 0 && !options.hpn_disabled) {
++ c->dynamic_window = 1;
++ debug ("Enabled Dynamic Window Scaling");
++ }
++#endif
+ debug3("ssh_session2_open: channel_new: %d", c->self);
+
+ channel_send_open(c->self);
+--- a/sshconnect.c 2015-10-24 04:53:18.000000000 +0200
++++ b/sshconnect.c 2015-10-24 05:07:02.000000000 +0200
+@@ -266,6 +266,31 @@ ssh_kill_proxy_command(void)
+ kill(proxy_command_pid, SIGHUP);
+ }
+
++#ifdef HPN_ENABLED
++/*
++ * Set TCP receive buffer if requested.
++ * Note: tuning needs to happen after the socket is
++ * created but before the connection happens
++ * so winscale is negotiated properly -cjr
++ */
++static void
++ssh_set_socket_recvbuf(int sock)
++{
++ void *buf = (void *)&options.tcp_rcv_buf;
++ int sz = sizeof(options.tcp_rcv_buf);
++ int socksize;
++ socklen_t socksizelen = sizeof(socksize);
++
++ debug("setsockopt Attempting to set SO_RCVBUF to %d", options.tcp_rcv_buf);
++ if (setsockopt(sock, SOL_SOCKET, SO_RCVBUF, buf, sz) >= 0) {
++ getsockopt(sock, SOL_SOCKET, SO_RCVBUF, &socksize, &socksizelen);
++ debug("setsockopt SO_RCVBUF: %.100s %d", strerror(errno), socksize);
++ } else
++ error("Couldn't set socket receive buffer to %d: %.100s",
++ options.tcp_rcv_buf, strerror(errno));
++}
++#endif
++
+ /*
+ * Creates a (possibly privileged) socket for use as the ssh connection.
+ */
+@@ -282,6 +307,11 @@ ssh_create_socket(int privileged, struct
+ }
+ fcntl(sock, F_SETFD, FD_CLOEXEC);
+
++#ifdef HPN_ENABLED
++ if (options.tcp_rcv_buf > 0)
++ ssh_set_socket_recvbuf(sock);
++#endif
++
+ /* Bind the socket to an alternative local IP address */
+ if (options.bind_address == NULL && !privileged)
+ return sock;
+@@ -523,11 +553,23 @@ send_client_banner(int connection_out, i
+ {
+ /* Send our own protocol version identification. */
+ if (compat20) {
+- xasprintf(&client_version_string, "SSH-%d.%d-%.100s\r\n",
+- PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2, SSH_VERSION);
++ xasprintf(&client_version_string, "SSH-%d.%d-%.100s%s\r\n",
++ PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2, SSH_VERSION,
++#ifdef HPN_ENABLED
++ options.hpn_disabled ? "" : SSH_HPN
++#else
++ ""
++#endif
++ );
+ } else {
+- xasprintf(&client_version_string, "SSH-%d.%d-%.100s\n",
+- PROTOCOL_MAJOR_1, minor1, SSH_VERSION);
++ xasprintf(&client_version_string, "SSH-%d.%d-%.100s%s\n",
++ PROTOCOL_MAJOR_1, minor1, SSH_VERSION,
++#ifdef HPN_ENABLED
++ options.hpn_disabled ? "" : SSH_HPN
++#else
++ ""
++#endif
++ );
+ }
+ if (roaming_atomicio(vwrite, connection_out, client_version_string,
+ strlen(client_version_string)) != strlen(client_version_string))
+--- a/sshconnect2.c 2015-10-24 04:53:18.000000000 +0200
++++ b/sshconnect2.c 2015-10-24 05:07:02.000000000 +0200
+@@ -80,6 +80,14 @@
+ extern char *client_version_string;
+ extern char *server_version_string;
+ extern Options options;
++#ifdef NONE_CIPHER_ENABLED
++struct kex *xxx_kex;
++
++/* tty_flag is set in ssh.c. use this in ssh_userauth2 */
++/* if it is set then prevent the switch to the null cipher */
++
++extern int tty_flag;
++#endif
+
+ /*
+ * SSH2 key exchange
+@@ -153,13 +161,16 @@ order_hostkeyalgs(char *host, struct soc
+ return ret;
+ }
+
++static char *myproposal[PROPOSAL_MAX];
++static const char *myproposal_default[PROPOSAL_MAX] = { KEX_CLIENT };
+ void
+ ssh_kex2(char *host, struct sockaddr *hostaddr, u_short port)
+ {
+- char *myproposal[PROPOSAL_MAX] = { KEX_CLIENT };
+ struct kex *kex;
+ int r;
+
++ memcpy(&myproposal, &myproposal_default, sizeof(myproposal));
++
+ xxx_host = host;
+ xxx_hostaddr = hostaddr;
+
+@@ -215,6 +226,10 @@ ssh_kex2(char *host, struct sockaddr *ho
+ kex->server_version_string=server_version_string;
+ kex->verify_host_key=&verify_host_key_callback;
+
++#ifdef NONE_CIPHER_ENABLED
++ xxx_kex = kex;
++#endif
++
+ dispatch_run(DISPATCH_BLOCK, &kex->done, active_state);
+
+ if (options.use_roaming && !kex->roaming) {
+@@ -416,6 +431,29 @@ ssh_userauth2(const char *local_user, co
+ pubkey_cleanup(&authctxt);
+ dispatch_range(SSH2_MSG_USERAUTH_MIN, SSH2_MSG_USERAUTH_MAX, NULL);
+
++#ifdef NONE_CIPHER_ENABLED
++ /*
++ * if the user wants to use the none cipher do it
++ * post authentication and only if the right conditions are met
++ * both of the NONE commands must be true and there must be no
++ * tty allocated.
++ */
++ if ((options.none_switch == 1) && (options.none_enabled == 1)) {
++ if (!tty_flag) { /* no null on tty sessions */
++ debug("Requesting none rekeying...");
++ myproposal[PROPOSAL_ENC_ALGS_STOC] = "none";
++ myproposal[PROPOSAL_ENC_ALGS_CTOS] = "none";
++ kex_prop2buf(xxx_kex->my, myproposal);
++ packet_request_rekeying();
++ fprintf(stderr, "WARNING: ENABLED NONE CIPHER\n");
++ } else {
++ /* requested NONE cipher when in a tty */
++ debug("Cannot switch to NONE cipher with tty allocated");
++ fprintf(stderr, "NONE cipher switch disabled when a TTY is allocated\n");
++ }
++ }
++#endif
++
+ debug("Authentication succeeded (%s).", authctxt.method->name);
+ }
+
+--- a/sshd.c 2015-10-24 04:53:18.000000000 +0200
++++ b/sshd.c 2015-10-24 05:36:38.000000000 +0200
+@@ -431,8 +431,11 @@ sshd_exchange_identification(int sock_in
+ minor = PROTOCOL_MINOR_1;
+ }
+
+- xasprintf(&server_version_string, "SSH-%d.%d-%.100s%s%s%s",
++ xasprintf(&server_version_string, "SSH-%d.%d-%.100s%s%s%s%s",
+ major, minor, SSH_VERSION,
++#ifdef HPN_ENABLED
++ options.hpn_disabled ? "" : SSH_HPN,
++#endif
+ *options.version_addendum == '\0' ? "" : " ",
+ options.version_addendum, newline);
+
+@@ -1162,6 +1165,10 @@ server_listen(void)
+ int ret, listen_sock, on = 1;
+ struct addrinfo *ai;
+ char ntop[NI_MAXHOST], strport[NI_MAXSERV];
++#ifdef HPN_ENABLED
++ int socksize;
++ socklen_t socksizelen = sizeof(socksize);
++#endif
+
+ for (ai = options.listen_addrs; ai; ai = ai->ai_next) {
+ if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6)
+@@ -1202,6 +1209,13 @@ server_listen(void)
+
+ debug("Bind to port %s on %s.", strport, ntop);
+
++#ifdef HPN_ENABLED
++ getsockopt(listen_sock, SOL_SOCKET, SO_RCVBUF,
++ &socksize, &socksizelen);
++ debug("Server TCP RWIN socket size: %d", socksize);
++ debug("HPN Buffer Size: %d", options.hpn_buffer_size);
++#endif
++
+ /* Bind the socket to the desired port. */
+ if (bind(listen_sock, ai->ai_addr, ai->ai_addrlen) < 0) {
+ error("Bind to port %s on %s failed: %.200s.",
+@@ -2152,6 +2166,11 @@ main(int ac, char **av)
+ remote_ip, remote_port, laddr, get_local_port());
+ free(laddr);
+
++#ifdef HPN_ENABLED
++ /* set the HPN options for the child */
++ channel_set_hpn(options.hpn_disabled, options.hpn_buffer_size);
++#endif
++
+ /*
+ * We don't want to listen forever unless the other side
+ * successfully authenticates itself. So we set up an alarm which is
+@@ -2555,6 +2574,14 @@ do_ssh2_kex(void)
+ myproposal[PROPOSAL_MAC_ALGS_CTOS] =
+ myproposal[PROPOSAL_MAC_ALGS_STOC] = options.macs;
+
++#ifdef NONE_CIPHER_ENABLED
++ if (options.none_enabled == 1) {
++ debug ("WARNING: None cipher enabled");
++ myproposal[PROPOSAL_ENC_ALGS_CTOS] =
++ myproposal[PROPOSAL_ENC_ALGS_STOC] = compat_cipher_proposal(KEX_ENCRYPT_INCLUDE_NONE);
++ }
++#endif
++
+ if (options.compression == COMP_NONE) {
+ myproposal[PROPOSAL_COMP_ALGS_CTOS] =
+ myproposal[PROPOSAL_COMP_ALGS_STOC] = "none";
+--- a/sshd_config 2015-10-24 04:53:18.000000000 +0200
++++ b/sshd_config 2015-10-24 07:19:47.000000000 +0200
+@@ -125,6 +125,20 @@ UsePrivilegeSeparation sandbox # Defaul
+ # override default of no subsystems
+ Subsystem sftp /usr/libexec/sftp-server
+
++# the following are HPN related configuration options
++# tcp receive buffer polling. disable in non autotuning kernels
++#TcpRcvBufPoll yes
++
++# disable hpn performance boosts
++#HPNDisabled no
++
++# buffer size for hpn to non-hpn connections
++#HPNBufferSize 2048
++
++
++# allow the use of the none cipher
++#NoneEnabled no
++
+ # Example of overriding settings on a per-user basis
+ #Match User anoncvs
+ # X11Forwarding no
+--- a/version.h 2015-10-24 04:53:19.000000000 +0200
++++ b/version.h 2015-10-24 05:07:02.000000000 +0200
+@@ -4,3 +4,4 @@
+
+ #define SSH_PORTABLE "p1"
+ #define SSH_RELEASE SSH_VERSION SSH_PORTABLE
++#define SSH_HPN "-hpn14v5"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.macosforge.org/pipermail/macports-changes/attachments/20160115/a98ec73a/attachment-0001.html>
More information about the macports-changes
mailing list