[MacPorts] #23312: Unable to detect PHP version
John Korchok
jkorchok at hotmail.com
Tue Feb 2 18:54:50 PST 2010
> -----Original Message-----
> From: MacPorts [mailto:noreply at macports.org]
> Sent: Saturday, January 16, 2010 6:25 PM
> To: jkorchok at hotmail.com; macports-tickets at lists.macosforge.org
> Cc: ryandesign at macports.org
> Subject: Re: [MacPorts] #23312: Unable to detect PHP version
>
> #23312: Unable to detect PHP version
> -----------------------------------+--------------------------
> --------------
> Reporter: jkorchok at . | Owner:
> macports-tickets at .
> Type: defect | Status: closed
>
> Priority: Normal | Milestone:
>
> Component: ports | Version: 1.8.2
>
> Resolution: invalid | Keywords:
>
> Port: php5-oracle |
> -----------------------------------+--------------------------
> --------------
> Changes (by ryandesign at .):
>
> * status: new => closed
> * resolution: => invalid
>
>
> Old description:
>
> > I am getting the following when attempting to upgrade php5-oracle:
> >
> > sudo port upgrade php5-oracle
> > Password:
> > ---> Computing dependencies for php5-oracle
> > ---> Configuring php5-oracle
> > Error: Target org.macports.configure returned: configure
> failure: shell
> > command " cd
> >
> "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_php_php5-> oracle/work/php-5.3.1/ext/oci8"
> > && ./configure --prefix=/opt/local --with-
> > oci8=instantclient,/opt/local/lib/oracle --with-pdo-
> > oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
> > Command output: checking for re2c... no
> > configure: WARNING: You will need re2c 0.13.4 or later if
> you want to
> > regenerate PHP parsers.
> > checking for gawk... gawk
> > checking for Oracle (OCI8) support... yes, shared
> > checking PHP version... Unknown option: n
> > Usage: head [-options] <url>...
> > -m <method> use method for the request (default is 'HEAD')
> > -f make request even if head believes method
> is illegal
> > -b <base> Use the specified URL as base
> > -t <timeout> Set timeout value
> > -i <time> Set the If-Modified-Since header on the request
> > -c <conttype> use this content-type for POST, PUT, CHECKIN
> > -a Use text mode for content I/O
> > -p <proxyurl> use this as a proxy
> > -P don't load proxy settings from environment
> > -H <header> send this HTTP header (you can specify several)
> >
> > -u Display method and URL before any response
> > -U Display request headers (implies -u)
> > -s Display response status code
> > -S Display response status chain
> > -e Display response headers
> > -d Do not display content
> > -o <format> Process HTML content in various ways
> >
> > -v Show program version
> > -h Print this message
> >
> > -x Extra debugging output
> > configure: error: failed to detect PHP version, please report
> >
> > Error: Unable to upgrade port: 1
> > Before reporting a bug, first run the command again with
> the -d flag to
> > get complete output.
> >
> > I previously ran
> > port clean php5-oracle
> > but it didn't help.
> >
> > I ran
> > sudo port uninstall php5-oracle
> > then
> > sudo port install php5-oracle
> > and got the same error message.
> >
> > When I run
> > sudo port -d install php5-oracle
> > I get the following:
> >
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/php/php5-oracle
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/php/php5-oracle
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/php5extension-1.0.tcl
> > DEBUG: Re-registering default for build.dir
> > DEBUG: Re-registering default for configure.dir
> > DEBUG: Re-registering default for destroot.dir
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port
> php5-oracle.
> > DEBUG: Requested variant darwin is not provided by port php5-oracle.
> > DEBUG: Requested variant macosx is not provided by port php5-oracle.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/lang/php5
> > DEBUG: epoch: in tree: 1 installed: 1
> > DEBUG: php5 5.3.1_1 exists in the ports tree
> > DEBUG: php5 5.3.1_1 +apache2+macosx+mysql5+oracle is the
> latest installed
> > DEBUG: php5 5.3.1_1 +apache2+macosx+mysql5+oracle is active
> > DEBUG: Merging existing variants apache2 macosx mysql5 oracle into
> > variants
> > DEBUG: new fully merged portvariants: apache2 + oracle + mysql5 +
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/lang/php5
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: adding the default universal variant
> > DEBUG: Requested variant powerpc is not provided by port php5.
> > DEBUG: Requested variant darwin is not provided by port php5.
> > DEBUG: Executing variant macosx provides macosx
> > DEBUG: Executing variant apache2 provides apache2
> > DEBUG: Executing variant mysql5 provides mysql5
> > DEBUG: Executing variant oracle provides oracle
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/pkgconfig
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: pkgconfig 0.23_1 exists in the ports tree
> > DEBUG: pkgconfig 0.23_1 is the latest installed
> > DEBUG: pkgconfig 0.23_1 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/pkgconfig
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port pkgconfig.
> > DEBUG: Requested variant darwin is not provided by port pkgconfig.
> > DEBUG: Requested variant macosx is not provided by port pkgconfig.
> > DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/autoconf213
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: autoconf213 2.13_1 exists in the ports tree
> > DEBUG: autoconf213 2.13_1 is the latest installed
> > DEBUG: autoconf213 2.13_1 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/autoconf213
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: 'universal_variant no' specified, so not adding the default
> > universal variant
> > DEBUG: Requested variant powerpc is not provided by port
> autoconf213.
> > DEBUG: Requested variant darwin is not provided by port autoconf213.
> > DEBUG: Requested variant macosx is not provided by port autoconf213.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/lang/perl5
> > DEBUG: perl5 is *not* installed by MacPorts
> > DEBUG: Searching for dependency: perl5
> > DEBUG: Didn't find receipt, going to depspec regex for: perl5
> > DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex:
> > ^perl$
> > DEBUG: perl5 not installed, soft dependency satisfied
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/m4
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: m4 1.4.13_0 exists in the ports tree
> > DEBUG: m4 1.4.13_0 is the latest installed
> > DEBUG: m4 1.4.13_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/m4
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port m4.
> > DEBUG: Requested variant darwin is not provided by port m4.
> > DEBUG: Requested variant macosx is not provided by port m4.
> > DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/lang/gawk
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: gawk 3.1.7_0 exists in the ports tree
> > DEBUG: gawk 3.1.7_0 is the latest installed
> > DEBUG: gawk 3.1.7_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/lang/gawk
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port gawk.
> > DEBUG: Requested variant darwin is not provided by port gawk.
> > DEBUG: Requested variant macosx is not provided by port gawk.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/libiconv
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: libiconv 1.13_0 exists in the ports tree
> > DEBUG: libiconv 1.13_0 is the latest installed
> > DEBUG: libiconv 1.13_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/libiconv
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port libiconv.
> > DEBUG: Requested variant darwin is not provided by port libiconv.
> > DEBUG: Requested variant macosx is not provided by port libiconv.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/gperf
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: gperf 3.0.4_0 exists in the ports tree
> > DEBUG: gperf 3.0.4_0 is the latest installed
> > DEBUG: gperf 3.0.4_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/gperf
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port gperf.
> > DEBUG: Requested variant darwin is not provided by port gperf.
> > DEBUG: Requested variant macosx is not provided by port gperf.
> > DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> > DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/gettext
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: gettext 0.17_4 exists in the ports tree
> > DEBUG: gettext 0.17_4 is the latest installed
> > DEBUG: gettext 0.17_4 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/gettext
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/archcheck-1.0.tcl
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port gettext.
> > DEBUG: Requested variant darwin is not provided by port gettext.
> > DEBUG: Requested variant macosx is not provided by port gettext.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/ncurses
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: ncurses 5.7_0 exists in the ports tree
> > DEBUG: ncurses 5.7_0 is the latest installed
> > DEBUG: ncurses 5.7_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/ncurses
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port ncurses.
> > DEBUG: Requested variant darwin is not provided by port ncurses.
> > DEBUG: Requested variant macosx is not provided by port ncurses.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/ncursesw
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: ncursesw 5.7_0 exists in the ports tree
> > DEBUG: ncursesw 5.7_0 is the latest installed
> > DEBUG: ncursesw 5.7_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/ncursesw
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port ncursesw.
> > DEBUG: Requested variant darwin is not provided by port ncursesw.
> > DEBUG: Requested variant macosx is not provided by port ncursesw.
> > DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> > DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/expat
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: expat 2.0.1_0 exists in the ports tree
> > DEBUG: expat 2.0.1_0 is the latest installed
> > DEBUG: expat 2.0.1_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/expat
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port expat.
> > DEBUG: Requested variant darwin is not provided by port expat.
> > DEBUG: Requested variant macosx is not provided by port expat.
> > DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> > DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> > DEBUG: No need to upgrade! gawk 3.1.7_0 >= gawk 3.1.7_0
> > DEBUG: No need to upgrade! autoconf213 2.13_1 >= autoconf213 2.13_1
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/gsed
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: gsed 4.2.1_0 exists in the ports tree
> > DEBUG: gsed 4.2.1_0 +darwin_8 is the latest installed
> > DEBUG: gsed 4.2.1_0 +darwin_8 is active
> > DEBUG: Merging existing variants darwin_8 into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/gsed
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port gsed.
> > DEBUG: Requested variant darwin is not provided by port gsed.
> > DEBUG: Requested variant macosx is not provided by port gsed.
> > DEBUG: Executing variant darwin_8 provides darwin_8
> > DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/libtool
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: libtool 2.2.6b_0 exists in the ports tree
> > DEBUG: libtool 2.2.6b_0 is the latest installed
> > DEBUG: libtool 2.2.6b_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/libtool
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port libtool.
> > DEBUG: Requested variant darwin is not provided by port libtool.
> > DEBUG: Requested variant macosx is not provided by port libtool.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/automake
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: automake 1.11.1_0 exists in the ports tree
> > DEBUG: automake 1.11.1_0 is the latest installed
> > DEBUG: automake 1.11.1_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/automake
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port automake.
> > DEBUG: Requested variant darwin is not provided by port automake.
> > DEBUG: Requested variant macosx is not provided by port automake.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/autoconf
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: autoconf 2.65_0 exists in the ports tree
> > DEBUG: autoconf 2.65_0 is the latest installed
> > DEBUG: autoconf 2.65_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/autoconf
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: 'universal_variant no' specified, so not adding the default
> > universal variant
> > DEBUG: Requested variant powerpc is not provided by port autoconf.
> > DEBUG: Requested variant darwin is not provided by port autoconf.
> > DEBUG: Requested variant macosx is not provided by port autoconf.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/help2man
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: help2man 1.37.1_1 exists in the ports tree
> > DEBUG: help2man 1.37.1_1 is the latest installed
> > DEBUG: help2man 1.37.1_1 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/help2man
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port help2man.
> > DEBUG: Requested variant darwin is not provided by port help2man.
> > DEBUG: Requested variant macosx is not provided by port help2man.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/perl/p5
> > -locale-gettext
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
> > DEBUG: p5-locale-gettext 1.05_2 is the latest installed
> > DEBUG: p5-locale-gettext 1.05_2 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/perl/p5
> > -locale-gettext
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/perl5-1.0.tcl
> > DEBUG: 'universal_variant no' specified, so not adding the default
> > universal variant
> > DEBUG: Requested variant powerpc is not provided by port p5-locale-
> > gettext.
> > DEBUG: Requested variant darwin is not provided by port p5-locale-
> > gettext.
> > DEBUG: Requested variant macosx is not provided by port p5-locale-
> > gettext.
> > DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >=
> p5-locale-gettext
> > 1.05_2
> > DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
> > DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0
> > DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> > DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/libxml2
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: libxml2 2.7.6_0 exists in the ports tree
> > DEBUG: libxml2 2.7.6_0 is the latest installed
> > DEBUG: libxml2 2.7.6_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/libxml2
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/archcheck-1.0.tcl
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port libxml2.
> > DEBUG: Requested variant darwin is not provided by port libxml2.
> > DEBUG: Requested variant macosx is not provided by port libxml2.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/archivers/zlib
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: zlib 1.2.3_4 exists in the ports tree
> > DEBUG: zlib 1.2.3_4 is the latest installed
> > DEBUG: zlib 1.2.3_4 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/archivers/zlib
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port zlib.
> > DEBUG: Requested variant darwin is not provided by port zlib.
> > DEBUG: Requested variant macosx is not provided by port zlib.
> > DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
> > DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/archivers/bzip2
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: bzip2 1.0.5_3 exists in the ports tree
> > DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
> > DEBUG: bzip2 1.0.5_3 +darwin is active
> > DEBUG: Merging existing variants darwin into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/archivers/bzip2
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port bzip2.
> > DEBUG: Requested variant macosx is not provided by port bzip2.
> > DEBUG: Executing variant darwin provides darwin
> > DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/mhash
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: mhash 0.9.9.9_0 exists in the ports tree
> > DEBUG: mhash 0.9.9.9_0 is the latest installed
> > DEBUG: mhash 0.9.9.9_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/mhash
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port mhash.
> > DEBUG: Requested variant darwin is not provided by port mhash.
> > DEBUG: Requested variant macosx is not provided by port mhash.
> > DEBUG: No need to upgrade! mhash 0.9.9.9_0 >= mhash 0.9.9.9_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/pcre
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: pcre 7.9_0 exists in the ports tree
> > DEBUG: pcre 7.9_0 is the latest installed
> > DEBUG: pcre 7.9_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/pcre
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port pcre.
> > DEBUG: Requested variant darwin is not provided by port pcre.
> > DEBUG: Requested variant macosx is not provided by port pcre.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/readline
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: readline 6.1.000_1 exists in the ports tree
> > DEBUG: readline 6.1.000_1 +darwin is the latest installed
> > DEBUG: readline 6.1.000_1 +darwin is active
> > DEBUG: Merging existing variants darwin into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/readline
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port readline.
> > DEBUG: Requested variant macosx is not provided by port readline.
> > DEBUG: Executing variant darwin provides darwin
> > DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
> > DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/www/apache2
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: apache2 2.2.14_0 exists in the ports tree
> > DEBUG: apache2 2.2.14_0 +darwin+preforkmpm is the latest installed
> > DEBUG: apache2 2.2.14_0 +darwin+preforkmpm is active
> > DEBUG: Merging existing variants darwin preforkmpm into variants
> > DEBUG: new fully merged portvariants: preforkmpm +
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/www/apache2
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: adding the default universal variant
> > DEBUG: Requested variant powerpc is not provided by port apache2.
> > DEBUG: Requested variant macosx is not provided by port apache2.
> > DEBUG: Executing variant darwin provides darwin
> > DEBUG: Executing variant preforkmpm provides preforkmpm
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/apr
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: apr 1.3.9_1 exists in the ports tree
> > DEBUG: apr 1.3.9_1 is the latest installed
> > DEBUG: apr 1.3.9_1 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/apr
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port apr.
> > DEBUG: Requested variant darwin is not provided by port apr.
> > DEBUG: Requested variant macosx is not provided by port apr.
> > DEBUG: No need to upgrade! apr 1.3.9_1 >= apr 1.3.9_1
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel
> > /apr-util
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: apr-util 1.3.9_0 exists in the ports tree
> > DEBUG: apr-util 1.3.9_0 is the latest installed
> > DEBUG: apr-util 1.3.9_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> > /apr-util
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port apr-util.
> > DEBUG: Requested variant darwin is not provided by port apr-util.
> > DEBUG: Requested variant macosx is not provided by port apr-util.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/databases/db46
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: db46 4.6.21_6 exists in the ports tree
> > DEBUG: db46 4.6.21_6 is the latest installed
> > DEBUG: db46 4.6.21_6 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/databases/db46
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port db46.
> > DEBUG: Requested variant darwin is not provided by port db46.
> > DEBUG: Requested variant macosx is not provided by port db46.
> > DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/databases/sqlite3
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: sqlite3 3.6.22_0 exists in the ports tree
> > DEBUG: sqlite3 3.6.22_0 is the latest installed
> > DEBUG: sqlite3 3.6.22_0 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/databases/sqlite3
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: adding the default universal variant
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: Requested variant powerpc is not provided by port sqlite3.
> > DEBUG: Requested variant darwin is not provided by port sqlite3.
> > DEBUG: Requested variant macosx is not provided by port sqlite3.
> > DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0
> > DEBUG: No need to upgrade! apr-util 1.3.9_0 >= apr-util 1.3.9_0
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/openssl
> > DEBUG: epoch: in tree: 1 installed: 1
> > DEBUG: openssl 0.9.8l_0 exists in the ports tree
> > DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
> > DEBUG: openssl 0.9.8l_0 +darwin is active
> > DEBUG: Merging existing variants darwin into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/openssl
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: Using group file
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> > DEBUG: Reading variant descriptions from
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> > DEBUG: universal variant already exists, so not adding the
> default one
> > DEBUG: Requested variant powerpc is not provided by port openssl.
> > DEBUG: Requested variant macosx is not provided by port openssl.
> > DEBUG: Executing variant darwin provides darwin
> > DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
> > DEBUG: No need to upgrade! apache2 2.2.14_0 >= apache2 2.2.14_0
> > DEBUG: No need to upgrade! php5 5.3.1_1 >= php5 5.3.1_1
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/databases
> > /oracle-instantclient
> > DEBUG: epoch: in tree: 0 installed: 0
> > DEBUG: oracle-instantclient 10.2.0.4.0_4 exists in the ports tree
> > DEBUG: oracle-instantclient 10.2.0.4.0_4 is the latest installed
> > DEBUG: oracle-instantclient 10.2.0.4.0_4 is active
> > DEBUG: Merging existing variants into variants
> > DEBUG: new fully merged portvariants:
> > DEBUG: Changing to port directory:
> >
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/databases
> > /oracle-instantclient
> > DEBUG: OS Platform: darwin
> > DEBUG: OS Version: 8.11.0
> > DEBUG: Mac OS X Version: 10.4
> > DEBUG: System Arch: powerpc
> > DEBUG: setting option os.universal_supported to yes
> > DEBUG: org.macports.load registered provides 'load', a pre-existing
> > procedure. Target override will not be provided
> > DEBUG: org.macports.distfiles registered provides
> 'distfiles', a pre-
> > existing procedure. Target override will not be provided
> > DEBUG: 'universal_variant no' specified, so not adding the default
> > universal variant
> > DEBUG: Requested variant powerpc is not provided by port oracle-
> > instantclient.
> > DEBUG: Requested variant darwin is not provided by port oracle-
> > instantclient.
> > DEBUG: Requested variant macosx is not provided by port oracle-
> > instantclient.
> > DEBUG: Found port in
> >
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/archivers/unzip
> > DEBUG: unzip is *not* installed by MacPorts
> > DEBUG: Searching for dependency: unzip
> > DEBUG: Didn't find receipt, going to depspec regex for: unzip
> > DEBUG: Found Dependency: path: /usr/bin filename: unzip
> regex: ^unzip$
> > DEBUG: unzip not installed, soft dependency satisfied
> > DEBUG: No need to upgrade! oracle-instantclient
> 10.2.0.4.0_4 >= oracle-
> > instantclient 10.2.0.4.0_4
> > ---> Computing dependencies for php5-oracle
> > DEBUG: Searching for dependency: php5
> > DEBUG: Found Dependency: receipt exists for php5
> > DEBUG: Searching for dependency: oracle-instantclient
> > DEBUG: Found Dependency: receipt exists for oracle-instantclient
> > DEBUG: Executing org.macports.main (php5-oracle)
> > DEBUG: Skipping completed org.macports.fetch (php5-oracle)
> > DEBUG: Skipping completed org.macports.checksum (php5-oracle)
> > DEBUG: setting option extract.cmd to /usr/bin/bzip2
> > DEBUG: Skipping completed org.macports.extract (php5-oracle)
> > DEBUG: Skipping completed org.macports.patch (php5-oracle)
> > ---> Configuring php5-oracle
> > DEBUG: Using compiler 'Mac OS X gcc 4.0'
> > DEBUG: Executing proc-pre-org.macports.configure-configure-0
> > DEBUG: Generating configure script in oci8
> > Configuring for:
> > PHP Api Version: 20090626
> > Zend Module Api No: 20090626
> > Zend Extension Api No: 220090626
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_static_works,
> > ...): suspicious cache-id, must contain _cv_ to be cached
> > ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
> > ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is
> expanded from...
> > aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
> > aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
> > aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
> > aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
> > aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
> > aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
> > configure.in:150: the top level
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works, ...):
> > suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
> > aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX,
> > ...): suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
> > aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
> > aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_static_works,
> > ...): suspicious cache-id, must contain _cv_ to be cached
> > ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
> > ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is
> expanded from...
> > aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
> > aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
> > aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
> > aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
> > aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
> > aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
> > configure.in:150: the top level
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works, ...):
> > suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
> > aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX,
> > ...): suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
> > aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
> > aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
> > DEBUG: Generating configure script in pdo_oci
> > Configuring for:
> > PHP Api Version: 20090626
> > Zend Module Api No: 20090626
> > Zend Extension Api No: 220090626
> > config.m4:196: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious
> > cache-id, must contain _cv_ to be cached
> > ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
> > ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is
> expanded from...
> > aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from...
> > config.m4:196: the top level
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_static_works,
> > ...): suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
> > aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
> > aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
> > aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
> > aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
> > aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
> > configure.in:150: the top level
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works, ...):
> > suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
> > aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX,
> > ...): suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
> > aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
> > aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
> > config.m4:196: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious
> > cache-id, must contain _cv_ to be cached
> > ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
> > ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is
> expanded from...
> > aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from...
> > config.m4:196: the top level
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_static_works,
> > ...): suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
> > aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
> > aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
> > aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
> > aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
> > aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
> > configure.in:150: the top level
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works, ...):
> > suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
> > aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
> > configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX,
> > ...): suspicious cache-id, must contain _cv_ to be cached
> > aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
> > aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
> > aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
> > DEBUG: Executing proc-pre-org.macports.configure-configure-1
> > DEBUG: Executing org.macports.configure (php5-oracle)
> > DEBUG: Configuring in oci8
> > DEBUG: Environment: CFLAGS='-O2 -arch ppc'
> > CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch ppc'
> > MACOSX_DEPLOYMENT_TARGET='10.4' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2
> > -m32' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.0'
> FCFLAGS='-O2
> > -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch
> ppc' FFLAGS='-O2
> > -m32' CC='/usr/bin/gcc-4.0'
> > DEBUG: Assembled command: 'cd
> >
> "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_php_php5-> oracle/work/php-5.3.1/ext/oci8"
> > && ./configure --prefix=/opt/local --with-
> > oci8=instantclient,/opt/local/lib/oracle --with-pdo-
> > oci=instantclient,/opt/local/lib/oracle,10.1'
> > configure: WARNING: unrecognized options: --with-pdo-oci
> > checking for grep that handles long lines and -e... /usr/bin/grep
> > checking for egrep... /usr/bin/grep -E
> > checking for a sed that does not truncate output...
> /opt/local/bin/gsed
> > checking whether the C compiler works... yes
> > checking for C compiler default output file name... a.out
> > checking for suffix of executables...
> > checking whether we are cross compiling... no
> > checking for suffix of object files... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether /usr/bin/gcc-4.0 accepts -g... yes
> > checking for /usr/bin/gcc-4.0 option to accept ISO C89...
> none needed
> > checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
> > checking for icc... no
> > checking for suncc... no
> > checking whether /usr/bin/gcc-4.0 and cc understand -c and
> -o together...
> > yes
> > checking for system library directory... lib
> > checking if compiler supports -R... no
> > checking if compiler supports -Wl,-rpath,... no
> > checking build system type... powerpc-apple-darwin8.11.0
> > checking host system type... powerpc-apple-darwin8.11.0
> > checking target system type... powerpc-apple-darwin8.11.0
> > checking for PHP prefix... /opt/local
> > checking for PHP includes... -I/opt/local/include/php
> > -I/opt/local/include/php/main -I/opt/local/include/php/TSRM
> > -I/opt/local/include/php/Zend -I/opt/local/include/php/ext
> > -I/opt/local/include/php/ext/date/lib -I/opt/local/include
> > checking for PHP extension directory...
> /opt/local/lib/php/extensions/no-
> > debug-non-zts-20090626
> > checking for PHP installed headers prefix... /opt/local/include/php
> > checking if debug is enabled... no
> > checking if zts is enabled... no
> > checking for re2c... no
> > configure: WARNING: You will need re2c 0.13.4 or later if
> you want to
> > regenerate PHP parsers.
> > checking for gawk... gawk
> > checking for Oracle (OCI8) support... yes, shared
> > checking PHP version... Unknown option: n
> > Usage: head [-options] <url>...
> > -m <method> use method for the request (default is 'HEAD')
> > -f make request even if head believes method
> is illegal
> > -b <base> Use the specified URL as base
> > -t <timeout> Set timeout value
> > -i <time> Set the If-Modified-Since header on the request
> > -c <conttype> use this content-type for POST, PUT, CHECKIN
> > -a Use text mode for content I/O
> > -p <proxyurl> use this as a proxy
> > -P don't load proxy settings from environment
> > -H <header> send this HTTP header (you can specify several)
> >
> > -u Display method and URL before any response
> > -U Display request headers (implies -u)
> > -s Display response status code
> > -S Display response status chain
> > -e Display response headers
> > -d Do not display content
> > -o <format> Process HTML content in various ways
> >
> > -v Show program version
> > -h Print this message
> >
> > -x Extra debugging output
> > configure: error: failed to detect PHP version, please report
> > Error: Target org.macports.configure returned: configure
> failure: shell
> > command " cd
> >
> "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_php_php5-> oracle/work/php-5.3.1/ext/oci8"
> > && ./configure --prefix=/opt/local --with-
> > oci8=instantclient,/opt/local/lib/oracle --with-pdo-
> > oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
> > DEBUG: Backtrace: configure failure: shell command " cd
> >
> "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_php_php5-> oracle/work/php-5.3.1/ext/oci8"
> > && ./configure --prefix=/opt/local --with-
> > oci8=instantclient,/opt/local/lib/oracle --with-pdo-
> > oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
> > while executing
> > "$procedure $targetname"
> > Warning: the following items did not execute (for php5-oracle):
> > org.macports.activate org.macports.configure org.macports.build
> > org.macports.destroot org.macports.install
> > Error: Status 1 encountered during processing.
> > To report a bug, see <http://guide.macports.org/#project.tickets>
>
> New description:
>
> I am getting the following when attempting to upgrade php5-oracle:
>
> {{{
> sudo port upgrade php5-oracle
> Password:
> ---> Computing dependencies for php5-oracle
> ---> Configuring php5-oracle
> Error: Target org.macports.configure returned: configure
> failure: shell
> command " cd
>
> "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_php_php5-> oracle/work/php-5.3.1/ext/oci8"
> && ./configure --prefix=/opt/local --with-
> oci8=instantclient,/opt/local/lib/oracle --with-pdo-
> oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
> Command output: checking for re2c... no
> configure: WARNING: You will need re2c 0.13.4 or later if you want to
> regenerate PHP parsers.
> checking for gawk... gawk
> checking for Oracle (OCI8) support... yes, shared
> checking PHP version... Unknown option: n
> Usage: head [-options] <url>...
> -m <method> use method for the request (default is 'HEAD')
> -f make request even if head believes method
> is illegal
> -b <base> Use the specified URL as base
> -t <timeout> Set timeout value
> -i <time> Set the If-Modified-Since header on the request
> -c <conttype> use this content-type for POST, PUT, CHECKIN
> -a Use text mode for content I/O
> -p <proxyurl> use this as a proxy
> -P don't load proxy settings from environment
> -H <header> send this HTTP header (you can specify several)
>
> -u Display method and URL before any response
> -U Display request headers (implies -u)
> -s Display response status code
> -S Display response status chain
> -e Display response headers
> -d Do not display content
> -o <format> Process HTML content in various ways
>
> -v Show program version
> -h Print this message
>
> -x Extra debugging output
> configure: error: failed to detect PHP version, please report
>
> Error: Unable to upgrade port: 1
> Before reporting a bug, first run the command again with the
> -d flag to
> get complete output.
> }}}
>
> I previously ran
> {{{
> port clean php5-oracle
> }}}
> but it didn't help.
>
> I ran
> {{{
> sudo port uninstall php5-oracle
> }}}
> then
> {{{
> sudo port install php5-oracle
> }}}
> and got the same error message.
>
> When I run
> {{{
> sudo port -d install php5-oracle
> }}}
> I get the following:
>
> {{{
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/php/php5-oracle
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/php/php5-oracle
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/php5extension-1.0.tcl
> DEBUG: Re-registering default for build.dir
> DEBUG: Re-registering default for configure.dir
> DEBUG: Re-registering default for destroot.dir
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port php5-oracle.
> DEBUG: Requested variant darwin is not provided by port php5-oracle.
> DEBUG: Requested variant macosx is not provided by port php5-oracle.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/lang/php5
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: php5 5.3.1_1 exists in the ports tree
> DEBUG: php5 5.3.1_1 +apache2+macosx+mysql5+oracle is the
> latest installed
> DEBUG: php5 5.3.1_1 +apache2+macosx+mysql5+oracle is active
> DEBUG: Merging existing variants apache2 macosx mysql5 oracle into
> variants
> DEBUG: new fully merged portvariants: apache2 + oracle + mysql5 +
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/lang/php5
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant powerpc is not provided by port php5.
> DEBUG: Requested variant darwin is not provided by port php5.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Executing variant apache2 provides apache2
> DEBUG: Executing variant mysql5 provides mysql5
> DEBUG: Executing variant oracle provides oracle
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/pkgconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pkgconfig 0.23_1 exists in the ports tree
> DEBUG: pkgconfig 0.23_1 is the latest installed
> DEBUG: pkgconfig 0.23_1 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/pkgconfig
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port pkgconfig.
> DEBUG: Requested variant darwin is not provided by port pkgconfig.
> DEBUG: Requested variant macosx is not provided by port pkgconfig.
> DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/autoconf213
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: autoconf213 2.13_1 exists in the ports tree
> DEBUG: autoconf213 2.13_1 is the latest installed
> DEBUG: autoconf213 2.13_1 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/autoconf213
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant powerpc is not provided by port autoconf213.
> DEBUG: Requested variant darwin is not provided by port autoconf213.
> DEBUG: Requested variant macosx is not provided by port autoconf213.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/lang/perl5
> DEBUG: perl5 is *not* installed by MacPorts
> DEBUG: Searching for dependency: perl5
> DEBUG: Didn't find receipt, going to depspec regex for: perl5
> DEBUG: Found Dependency: path: /opt/local/bin filename: perl
> regex: ^perl$
> DEBUG: perl5 not installed, soft dependency satisfied
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/m4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: m4 1.4.13_0 exists in the ports tree
> DEBUG: m4 1.4.13_0 is the latest installed
> DEBUG: m4 1.4.13_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/m4
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port m4.
> DEBUG: Requested variant darwin is not provided by port m4.
> DEBUG: Requested variant macosx is not provided by port m4.
> DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/lang/gawk
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gawk 3.1.7_0 exists in the ports tree
> DEBUG: gawk 3.1.7_0 is the latest installed
> DEBUG: gawk 3.1.7_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/lang/gawk
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port gawk.
> DEBUG: Requested variant darwin is not provided by port gawk.
> DEBUG: Requested variant macosx is not provided by port gawk.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.13_0 exists in the ports tree
> DEBUG: libiconv 1.13_0 is the latest installed
> DEBUG: libiconv 1.13_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/libiconv
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port libiconv.
> DEBUG: Requested variant darwin is not provided by port libiconv.
> DEBUG: Requested variant macosx is not provided by port libiconv.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.4_0 exists in the ports tree
> DEBUG: gperf 3.0.4_0 is the latest installed
> DEBUG: gperf 3.0.4_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/gperf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port gperf.
> DEBUG: Requested variant darwin is not provided by port gperf.
> DEBUG: Requested variant macosx is not provided by port gperf.
> DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_4 exists in the ports tree
> DEBUG: gettext 0.17_4 is the latest installed
> DEBUG: gettext 0.17_4 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port gettext.
> DEBUG: Requested variant darwin is not provided by port gettext.
> DEBUG: Requested variant macosx is not provided by port gettext.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0 is the latest installed
> DEBUG: ncurses 5.7_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/ncurses
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port ncurses.
> DEBUG: Requested variant darwin is not provided by port ncurses.
> DEBUG: Requested variant macosx is not provided by port ncurses.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0 is the latest installed
> DEBUG: ncursesw 5.7_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/ncursesw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port ncursesw.
> DEBUG: Requested variant darwin is not provided by port ncursesw.
> DEBUG: Requested variant macosx is not provided by port ncursesw.
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0 is the latest installed
> DEBUG: expat 2.0.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/expat
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port expat.
> DEBUG: Requested variant darwin is not provided by port expat.
> DEBUG: Requested variant macosx is not provided by port expat.
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> DEBUG: No need to upgrade! gawk 3.1.7_0 >= gawk 3.1.7_0
> DEBUG: No need to upgrade! autoconf213 2.13_1 >= autoconf213 2.13_1
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/gsed
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gsed 4.2.1_0 exists in the ports tree
> DEBUG: gsed 4.2.1_0 +darwin_8 is the latest installed
> DEBUG: gsed 4.2.1_0 +darwin_8 is active
> DEBUG: Merging existing variants darwin_8 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/gsed
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port gsed.
> DEBUG: Requested variant darwin is not provided by port gsed.
> DEBUG: Requested variant macosx is not provided by port gsed.
> DEBUG: Executing variant darwin_8 provides darwin_8
> DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/libtool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libtool 2.2.6b_0 exists in the ports tree
> DEBUG: libtool 2.2.6b_0 is the latest installed
> DEBUG: libtool 2.2.6b_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/libtool
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port libtool.
> DEBUG: Requested variant darwin is not provided by port libtool.
> DEBUG: Requested variant macosx is not provided by port libtool.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/automake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: automake 1.11.1_0 exists in the ports tree
> DEBUG: automake 1.11.1_0 is the latest installed
> DEBUG: automake 1.11.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/automake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port automake.
> DEBUG: Requested variant darwin is not provided by port automake.
> DEBUG: Requested variant macosx is not provided by port automake.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/autoconf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: autoconf 2.65_0 exists in the ports tree
> DEBUG: autoconf 2.65_0 is the latest installed
> DEBUG: autoconf 2.65_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/autoconf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant powerpc is not provided by port autoconf.
> DEBUG: Requested variant darwin is not provided by port autoconf.
> DEBUG: Requested variant macosx is not provided by port autoconf.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/help2man
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: help2man 1.37.1_1 exists in the ports tree
> DEBUG: help2man 1.37.1_1 is the latest installed
> DEBUG: help2man 1.37.1_1 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/help2man
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port help2man.
> DEBUG: Requested variant darwin is not provided by port help2man.
> DEBUG: Requested variant macosx is not provided by port help2man.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/perl/p5
> -locale-gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
> DEBUG: p5-locale-gettext 1.05_2 is the latest installed
> DEBUG: p5-locale-gettext 1.05_2 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/perl/p5
> -locale-gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant powerpc is not provided by port p5-locale-
> gettext.
> DEBUG: Requested variant darwin is not provided by port
> p5-locale-gettext.
> DEBUG: Requested variant macosx is not provided by port
> p5-locale-gettext.
> DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >=
> p5-locale-gettext
> 1.05_2
> DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
> DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0
> DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/textproc/libxml2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libxml2 2.7.6_0 exists in the ports tree
> DEBUG: libxml2 2.7.6_0 is the latest installed
> DEBUG: libxml2 2.7.6_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/textproc/libxml2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port libxml2.
> DEBUG: Requested variant darwin is not provided by port libxml2.
> DEBUG: Requested variant macosx is not provided by port libxml2.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/archivers/zlib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: zlib 1.2.3_4 exists in the ports tree
> DEBUG: zlib 1.2.3_4 is the latest installed
> DEBUG: zlib 1.2.3_4 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/archivers/zlib
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port zlib.
> DEBUG: Requested variant darwin is not provided by port zlib.
> DEBUG: Requested variant macosx is not provided by port zlib.
> DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
> DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/archivers/bzip2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: bzip2 1.0.5_3 exists in the ports tree
> DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
> DEBUG: bzip2 1.0.5_3 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/archivers/bzip2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port bzip2.
> DEBUG: Requested variant macosx is not provided by port bzip2.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/mhash
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: mhash 0.9.9.9_0 exists in the ports tree
> DEBUG: mhash 0.9.9.9_0 is the latest installed
> DEBUG: mhash 0.9.9.9_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/mhash
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port mhash.
> DEBUG: Requested variant darwin is not provided by port mhash.
> DEBUG: Requested variant macosx is not provided by port mhash.
> DEBUG: No need to upgrade! mhash 0.9.9.9_0 >= mhash 0.9.9.9_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/pcre
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pcre 7.9_0 exists in the ports tree
> DEBUG: pcre 7.9_0 is the latest installed
> DEBUG: pcre 7.9_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/pcre
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port pcre.
> DEBUG: Requested variant darwin is not provided by port pcre.
> DEBUG: Requested variant macosx is not provided by port pcre.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/readline
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: readline 6.1.000_1 exists in the ports tree
> DEBUG: readline 6.1.000_1 +darwin is the latest installed
> DEBUG: readline 6.1.000_1 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/readline
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port readline.
> DEBUG: Requested variant macosx is not provided by port readline.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
> DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/www/apache2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: apache2 2.2.14_0 exists in the ports tree
> DEBUG: apache2 2.2.14_0 +darwin+preforkmpm is the latest installed
> DEBUG: apache2 2.2.14_0 +darwin+preforkmpm is active
> DEBUG: Merging existing variants darwin preforkmpm into variants
> DEBUG: new fully merged portvariants: preforkmpm +
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/www/apache2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant powerpc is not provided by port apache2.
> DEBUG: Requested variant macosx is not provided by port apache2.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Executing variant preforkmpm provides preforkmpm
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/apr
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: apr 1.3.9_1 exists in the ports tree
> DEBUG: apr 1.3.9_1 is the latest installed
> DEBUG: apr 1.3.9_1 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/apr
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port apr.
> DEBUG: Requested variant darwin is not provided by port apr.
> DEBUG: Requested variant macosx is not provided by port apr.
> DEBUG: No need to upgrade! apr 1.3.9_1 >= apr 1.3.9_1
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel
> /apr-util
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: apr-util 1.3.9_0 exists in the ports tree
> DEBUG: apr-util 1.3.9_0 is the latest installed
> DEBUG: apr-util 1.3.9_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /apr-util
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port apr-util.
> DEBUG: Requested variant darwin is not provided by port apr-util.
> DEBUG: Requested variant macosx is not provided by port apr-util.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/databases/db46
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: db46 4.6.21_6 exists in the ports tree
> DEBUG: db46 4.6.21_6 is the latest installed
> DEBUG: db46 4.6.21_6 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/databases/db46
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port db46.
> DEBUG: Requested variant darwin is not provided by port db46.
> DEBUG: Requested variant macosx is not provided by port db46.
> DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/databases/sqlite3
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: sqlite3 3.6.22_0 exists in the ports tree
> DEBUG: sqlite3 3.6.22_0 is the latest installed
> DEBUG: sqlite3 3.6.22_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/databases/sqlite3
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant powerpc is not provided by port sqlite3.
> DEBUG: Requested variant darwin is not provided by port sqlite3.
> DEBUG: Requested variant macosx is not provided by port sqlite3.
> DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0
> DEBUG: No need to upgrade! apr-util 1.3.9_0 >= apr-util 1.3.9_0
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/devel/openssl
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: openssl 0.9.8l_0 exists in the ports tree
> DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
> DEBUG: openssl 0.9.8l_0 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/devel/openssl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the
> default one
> DEBUG: Requested variant powerpc is not provided by port openssl.
> DEBUG: Requested variant macosx is not provided by port openssl.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
> DEBUG: No need to upgrade! apache2 2.2.14_0 >= apache2 2.2.14_0
> DEBUG: No need to upgrade! php5 5.3.1_1 >= php5 5.3.1_1
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/databases
> /oracle-instantclient
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: oracle-instantclient 10.2.0.4.0_4 exists in the ports tree
> DEBUG: oracle-instantclient 10.2.0.4.0_4 is the latest installed
> DEBUG: oracle-instantclient 10.2.0.4.0_4 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
>
> /opt/local/var/macports/sources/rsync.macports.org/release/por
> ts/databases
> /oracle-instantclient
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 8.11.0
> DEBUG: Mac OS X Version: 10.4
> DEBUG: System Arch: powerpc
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant powerpc is not provided by port oracle-
> instantclient.
> DEBUG: Requested variant darwin is not provided by port oracle-
> instantclient.
> DEBUG: Requested variant macosx is not provided by port oracle-
> instantclient.
> DEBUG: Found port in
>
> file:///opt/local/var/macports/sources/rsync.macports.org/rele
> ase/ports/archivers/unzip
> DEBUG: unzip is *not* installed by MacPorts
> DEBUG: Searching for dependency: unzip
> DEBUG: Didn't find receipt, going to depspec regex for: unzip
> DEBUG: Found Dependency: path: /usr/bin filename: unzip
> regex: ^unzip$
> DEBUG: unzip not installed, soft dependency satisfied
> DEBUG: No need to upgrade! oracle-instantclient 10.2.0.4.0_4
> >= oracle-
> instantclient 10.2.0.4.0_4
> ---> Computing dependencies for php5-oracle
> DEBUG: Searching for dependency: php5
> DEBUG: Found Dependency: receipt exists for php5
> DEBUG: Searching for dependency: oracle-instantclient
> DEBUG: Found Dependency: receipt exists for oracle-instantclient
> DEBUG: Executing org.macports.main (php5-oracle)
> DEBUG: Skipping completed org.macports.fetch (php5-oracle)
> DEBUG: Skipping completed org.macports.checksum (php5-oracle)
> DEBUG: setting option extract.cmd to /usr/bin/bzip2
> DEBUG: Skipping completed org.macports.extract (php5-oracle)
> DEBUG: Skipping completed org.macports.patch (php5-oracle)
> ---> Configuring php5-oracle
> DEBUG: Using compiler 'Mac OS X gcc 4.0'
> DEBUG: Executing proc-pre-org.macports.configure-configure-0
> DEBUG: Generating configure script in oci8
> Configuring for:
> PHP Api Version: 20090626
> Zend Module Api No: 20090626
> Zend Extension Api No: 220090626
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_static_works,
> ...): suspicious cache-id, must contain _cv_ to be cached
> ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
> ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is
> expanded from...
> aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
> aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
> aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
> aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
> aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
> aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
> configure.in:150: the top level
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works, ...):
> suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
> aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX,
> ...): suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
> aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
> aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_static_works,
> ...): suspicious cache-id, must contain _cv_ to be cached
> ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
> ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is
> expanded from...
> aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
> aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
> aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
> aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
> aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
> aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
> configure.in:150: the top level
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works, ...):
> suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
> aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX,
> ...): suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
> aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
> aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
> DEBUG: Generating configure script in pdo_oci
> Configuring for:
> PHP Api Version: 20090626
> Zend Module Api No: 20090626
> Zend Extension Api No: 220090626
> config.m4:196: warning: AC_CACHE_VAL(pdo_inc_path, ...):
> suspicious cache-
> id, must contain _cv_ to be cached
> ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
> ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is
> expanded from...
> aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from...
> config.m4:196: the top level
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_static_works,
> ...): suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
> aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
> aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
> aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
> aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
> aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
> configure.in:150: the top level
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works, ...):
> suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
> aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX,
> ...): suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
> aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
> aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
> config.m4:196: warning: AC_CACHE_VAL(pdo_inc_path, ...):
> suspicious cache-
> id, must contain _cv_ to be cached
> ../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
> ../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is
> expanded from...
> aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from...
> config.m4:196: the top level
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_static_works,
> ...): suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
> aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
> aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
> aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
> aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
> aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
> configure.in:150: the top level
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works, ...):
> suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
> aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
> configure.in:150: warning:
> AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX,
> ...): suspicious cache-id, must contain _cv_ to be cached
> aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
> aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
> aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
> DEBUG: Executing proc-pre-org.macports.configure-configure-1
> DEBUG: Executing org.macports.configure (php5-oracle)
> DEBUG: Configuring in oci8
> DEBUG: Environment: CFLAGS='-O2 -arch ppc'
> CPPFLAGS='-I/opt/local/include'
> CXXFLAGS='-O2 -arch ppc' MACOSX_DEPLOYMENT_TARGET='10.4'
> CXX='/usr/bin/g++-4.0' F90FLAGS='-O2 -m32' LDFLAGS='-L/opt/local/lib'
> OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32'
> INSTALL='/usr/bin/install -c'
> OBJCFLAGS='-O2 -arch ppc' FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0'
> DEBUG: Assembled command: 'cd
>
> "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_php_php5-> oracle/work/php-5.3.1/ext/oci8"
> && ./configure --prefix=/opt/local --with-
> oci8=instantclient,/opt/local/lib/oracle --with-pdo-
> oci=instantclient,/opt/local/lib/oracle,10.1'
> configure: WARNING: unrecognized options: --with-pdo-oci
> checking for grep that handles long lines and -e... /usr/bin/grep
> checking for egrep... /usr/bin/grep -E
> checking for a sed that does not truncate output...
> /opt/local/bin/gsed
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether /usr/bin/gcc-4.0 accepts -g... yes
> checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
> checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
> checking for icc... no
> checking for suncc... no
> checking whether /usr/bin/gcc-4.0 and cc understand -c and
> -o together...
> yes
> checking for system library directory... lib
> checking if compiler supports -R... no
> checking if compiler supports -Wl,-rpath,... no
> checking build system type... powerpc-apple-darwin8.11.0
> checking host system type... powerpc-apple-darwin8.11.0
> checking target system type... powerpc-apple-darwin8.11.0
> checking for PHP prefix... /opt/local
> checking for PHP includes... -I/opt/local/include/php
> -I/opt/local/include/php/main -I/opt/local/include/php/TSRM
> -I/opt/local/include/php/Zend -I/opt/local/include/php/ext
> -I/opt/local/include/php/ext/date/lib -I/opt/local/include
> checking for PHP extension directory...
> /opt/local/lib/php/extensions/no-
> debug-non-zts-20090626
> checking for PHP installed headers prefix... /opt/local/include/php
> checking if debug is enabled... no
> checking if zts is enabled... no
> checking for re2c... no
> configure: WARNING: You will need re2c 0.13.4 or later if you want to
> regenerate PHP parsers.
> checking for gawk... gawk
> checking for Oracle (OCI8) support... yes, shared
> checking PHP version... Unknown option: n
> Usage: head [-options] <url>...
> -m <method> use method for the request (default is 'HEAD')
> -f make request even if head believes method
> is illegal
> -b <base> Use the specified URL as base
> -t <timeout> Set timeout value
> -i <time> Set the If-Modified-Since header on the request
> -c <conttype> use this content-type for POST, PUT, CHECKIN
> -a Use text mode for content I/O
> -p <proxyurl> use this as a proxy
> -P don't load proxy settings from environment
> -H <header> send this HTTP header (you can specify several)
>
> -u Display method and URL before any response
> -U Display request headers (implies -u)
> -s Display response status code
> -S Display response status chain
> -e Display response headers
> -d Do not display content
> -o <format> Process HTML content in various ways
>
> -v Show program version
> -h Print this message
>
> -x Extra debugging output
> configure: error: failed to detect PHP version, please report
> Error: Target org.macports.configure returned: configure
> failure: shell
> command " cd
>
> "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_php_php5-> oracle/work/php-5.3.1/ext/oci8"
> && ./configure --prefix=/opt/local --with-
> oci8=instantclient,/opt/local/lib/oracle --with-pdo-
> oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
> DEBUG: Backtrace: configure failure: shell command " cd
>
> "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_php_php5-> oracle/work/php-5.3.1/ext/oci8"
> && ./configure --prefix=/opt/local --with-
> oci8=instantclient,/opt/local/lib/oracle --with-pdo-
> oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
> while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for php5-oracle):
> org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
> }}}
>
> --
>
> Comment:
>
> Don't forget WikiFormatting.
>
> You have installed [http://search.cpan.org/perldoc?LWP
> libwww-perl] with
> its helper "HEAD" program, which has replaced your OS's
> unrelated "head"
> program because Mac OS X's filesystem is case-insensitive.
> Please restore
> the proper "head" program into your /usr/bin from your
> backups or from
> another machine with the same OS version, or reinstall Mac
> OS X to get it
> back. To avoid this, don't install libwww-perl with its
> "helper" scripts.
> If you install p5-libwww-perl using MacPorts, it will not
> include these
> helper scripts so you will not have this problem.
>
>
> http://www.macosxhints.com/article.php?story=20010603142727786
> &query=perl+HEAD
>
> --
> Ticket URL: <http://trac.macports.org/ticket/23312#comment:1>
> MacPorts <http://www.macports.org/>
> Ports system for Mac OS
>
I finally got around to trying this. /usr/bin does not contain "HEAD", it
contains only "head". This head is dated August 22, 2005 like all the other
versions of head on all my other Macs that have Tiger installed. Running a
binary comparison to head from a Mac that never had LWP installed shows them
to be identical files.
I now get the "Unable to detect PHP version" error on two G4 servers that
have Tiger installed. What else could be causing the error?
John Korchok
More information about the macports-dev
mailing list