Migration issue

[Adam Dershowitz]

> On Dec 16, 2015, at 11:58 AM, Mojca Miklavec <mojca at macports.org> wrote:
> 
> Dear Adam,
> 
> On 16 December 2015 at 17:34, Adam Dershowitz wrote:
>> I did a selfupdate.  I uninstalled per5, perl5.16 and perl5.22
>> Next, I installed perl5 +perl5_16
>> Next I installed perl5.16 +universal
>> 
>> Then I did 5.22 and had the problem again:
>> 
>> sudo port install perl5.22 +universal
>> --->  Computing dependencies for perl5.22
>> --->  Fetching archive for perl5.22
>> --->  Attempting to fetch
>> perl5.22-5.22.1_0+universal.darwin_15.i386-x86_64.tbz2 from
>> http://packages.macports.org/perl5.22
>> --->  Attempting to fetch
>> perl5.22-5.22.1_0+universal.darwin_15.i386-x86_64.tbz2 from
>> http://lil.fr.packages.macports.org/perl5.22
>> --->  Attempting to fetch
>> perl5.22-5.22.1_0+universal.darwin_15.i386-x86_64.tbz2 from
>> http://nue.de.packages.macports.org/macports/packages/perl5.22
>> --->  Fetching distfiles for perl5.22
>> --->  Verifying checksums for perl5.22
>> --->  Extracting perl5.22
>> --->  Applying patches to perl5.22
>> --->  Configuring perl5.22
>> --->  Building perl5.22
>> --->  Staging perl5.22 into destroot
>> --->  Installing perl5.22 @5.22.1_0+universal
>> --->  Activating perl5.22 @5.22.1_0+universal
>> Error: org.macports.activate for port perl5.22 returned: Image error:
>> /opt/local/bin/c2ph-5.22 is being used by the active perl5.16 port.  Please
>> deactivate this port first, or use 'port -f activate perl5.22' to force the
>> activation.
>> Please see the log file for port perl5.22 for details:
>> 
>> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_perl5/perl5.22/main.log
>> To report a bug, follow the instructions in the guide:
>>    http://guide.macports.org/#project.tickets
>> Error: Processing of port perl5.22 failed
>> 
>> I did the check that you asked and I see a whole bunch of stuff:
>> 
>> port contents perl5.16 | grep 5.22
>>  /opt/local/bin/a2p-5.22
>>  /opt/local/bin/c2ph-5.22
> ...
> 
> I need to investigate that. That shouldn't have happened.
> 
>> I can send the full list if that would help.  It includes a pile of stuff in
>> share/man as well.
> 
> You can send me the list of all files (port contents perl5.16) off
> list. But I have to try it out myself and see where I screwed up.

I’ll do that.

> 
>> Is the problem with perl5 +perl5_16 ?  Since that is version 5.22.1?
>> Should I not have installed that?
> 
> If perl5 +perl5_16 installs version 5.22.1 for you, that certainly
> shouldn't have happened.

Sorry I wasn’t clear.  I just meant that I perl5 shows this:
perl5 @5.22.1_0+perl5_16 (active)

So, it is version 5.22  But, it ddid install 5_16.


> 
> I would warmly suggest you to install perl5 +perl5_22 anyway, but the
> behaviour you describe is clearly a bug that we need to investigate
> and fix with a very high priority.

So, again, force uninstall perl5, perl5.15 and perl5.22 then just install perl5 +perl5_22?
What about the libraries?  I have a bunch of p5.16 ports that the script is trying to install.  


> 
> Mojca
> 
>> On Dec 16, 2015, at 10:30 AM, Mojca Miklavec wrote:
>> 
>> Dear Adam,
>> 
>> Your setup contains some mixture of universal and non-universal ports
>> that seems to be interfering.
>> 
>> Add to that the fact that if you would install some ports from scratch
>> now, you would get the +perl5_22 variant, while you probably installed
>> +perl5_16 in the past. And an upgrade would not automatically switch
>> to the other variant. Plus some ports have not been migrated to 5.22
>> yet:
>>   http://trac.macports.org/ticket/48365
>> 
>> I suspect that you get the error because two ports are trying to
>> install the same dependency, but one of them is requesting the
>> universal variant.
>> 
>> However there is one horribly strange error:
>>   /opt/local/bin/c2ph-5.22 is being used by the active perl5.16 port
>> Something seems wrong here. In my opinion you should force uninstall
>> both perl5.16 and perl5.22 and try to install them again. I have no
>> clue how you could end up in that situation though (and would
>> potentially like to know).
>> 
>> Once you reinstall both perl ports, please check
>>   port contents perl5.22 | grep 5.16
>>   port contents perl5.16 | grep 5.22
>> and make sure that you don't get any hits. Also, make sure that you
>> are using the very latest "selfupdate" (14 hours ago Perl was a tiny
>> bit broken).
>> 
>> Having both Perl 5.16 and 5.22 active should not be a problem.
>> 
>> Personally I would remove Perl ports and all ports with +perl5_xx
>> variants from the list of activated ports and install them manually
>> after migration is done.
>> 
>> Mojca
>> 
>> 
>> On 16 December 2015 at 15:52, Adam Dershowitz wrote:
>> 
>> I have been attempting to follow the full set of migration instructions,
>> after upgrading to 10.11, but I have run into issue with perl stuff.
>> i have a bunch of perl libraries that were all installed as dependents of
>> other ports.  Before I uninstalled my ports I had
>> 
>> perl5 @5.22.1_0+perl5_16 (active) platform='darwin 14' archs='noarch'
>> perl5.12 @5.12.5_0+universal platform='darwin 14' archs='i386 x86_64'
>> perl5.16 @5.16.3_1+universal (active) platform='darwin 14' archs='i386
>> x86_64'
>> perl5.22 @5.22.1_0+universal (active) platform='darwin 14' archs='i386
>> x86_64’
>> 
>> 
>> But, when I try to run restore_ports.tcl I get a bunch of errors related to
>> perl libraries.  The end of the attempt looked like this:
>> 
>> --->  Computing dependencies for p5.16-tree-dag_node
>> --->  Dependencies to be installed: p5.16-file-slurp-tiny p5.16-pathtools
>> p5.16-test-pod p5.16-pod-simple p5.16-pod-escapes p5.16-test-simple
>> --->  Configuring p5.16-file-slurp-tiny
>> Error: org.macports.configure for port p5.16-file-slurp-tiny returned:
>> configure failure: command execution failed
>> Error: Failed to install p5.16-file-slurp-tiny
>> Please see the log file for port p5.16-file-slurp-tiny for details:
>> 
>> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5-file-slurp-tiny/p5.16-file-slurp-tiny/main.log
>> Error: The following dependencies were not installed: p5.16-file-slurp-tiny
>> p5.16-pathtools p5.16-test-pod p5.16-pod-simple p5.16-pod-escapes
>> p5.16-test-simple
>> --->  Computing dependencies for p5.16-uri
>> --->  Dependencies to be installed: p5.16-mime-base64
>> Error: Requested variants "" do not match those the build was started with:
>> "+universal".
>> Error: Please use the same variants again, or run 'port clean
>> p5.16-mime-base64' first to remove the existing partially completed build.
>> Error: Failed to install p5.16-mime-base64
>> Please see the log file for port p5.16-mime-base64 for details:
>> 
>> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5-mime-base64/p5.16-mime-base64/main.log
>> Error: The following dependencies were not installed: p5.16-mime-base64
>> can't create directory
>> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5-version":
>> permission denied
>>   while executing
>> "file mkdir $workpath/.home"
>>   (procedure "open_statefile" line 29)
>>   invoked from within
>> "open_statefile"
>>   (procedure "check_variants" line 29)
>>   invoked from within
>> "check_variants activate"
>>   invoked from within
>> "$workername eval check_variants $target"
>>   (procedure "mportexec" line 7)
>>   invoked from within
>> "mportexec $workername $install_target"
>> Unable to execute target 'install' for port 'p5.16-version': can't create
>> directory
>> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5-version":
>> permission denied
>>   while executing
>> "install_ports $operationList"
>>   (file "./restore_ports.tcl" line 287)
>> 
>> 
>> It seems that there is an issue about having both perl 5.16 and 5.22 active?
>> I have tried to manually install each, but can’t seem to get both to be
>> active, even though I had them both active before.
>> 
>> I also tried this without making any progress:
>> 
>> sudo port deactivate perl5.16 +universal
>> --->  Deactivating perl5.16 @5.16.3_1+universal
>> --->  Unable to deactivate perl5.16 @5.16.3_1+universal, the following ports
>> depend on it:
>> --->  net-snmp @5.7.3_1+ssl
>> Error: org.macports.deactivate for port perl5.16 returned: Please uninstall
>> the ports that depend on perl5.16 first.
>> Please see the log file for port perl5.16 for details:
>> 
>> /opt/local/var/macports/logs/_opt_local_var_macports_registry_portfiles_perl5.16-5.16.3_1_1cffbdcc6ccb33bf8a69420c60d75162483a2dfc65a0f3c0b064fad1411ae7a6-9816/perl5.16/main.log
>> Warning: Failed to execute portfile from registry for perl5.16
>> @5.16.3_1+universal
>> --->  Deactivating perl5.16 @5.16.3_1+universal
>> --->  Unable to deactivate perl5.16 @5.16.3_1+universal, the following ports
>> depend on it:
>> --->  net-snmp @5.7.3_1+ssl
>> Error: port deactivate failed: Please uninstall the ports that depend on
>> perl5.16 first.
>> adershowitzMBP15:Fink Ports etc adershowitz$ sudo port install perl5.22
>> +universal
>> --->  Computing dependencies for perl5.22
>> --->  Activating perl5.22 @5.22.1_0+universal
>> Error: org.macports.activate for port perl5.22 returned: Image error:
>> /opt/local/bin/c2ph-5.22 is being used by the active perl5.16 port.  Please
>> deactivate this port first, or use 'port -f activate perl5.22' to force the
>> activation.
>> Please see the log file for port perl5.22 for details:
>> 
>> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_perl5/perl5.22/main.log
>> To report a bug, follow the instructions in the guide:
>>   http://guide.macports.org/#project.tickets
>> Error: Processing of port perl5.22 failed
>> 
>> Is there some easy way to work around this?  Would it be a good idea to
>> remove all my perl libraries from requested.txt then rerun the script?
>> Would it then correctly figure out what else has to be installed?
>> I do see that requested.txt has this as well   ossp-uuid @1.6.2_4+perl5_16
>> (active) platform='darwin 14' archs=‘x86_64’
>> So, for some reason it has the 5_16 variant (again, this was installed as a
>> dependent, so I’m not sure what installed it that way).
>> And it looks like net-snmp depends on perl 5.16.
>> 
>> So, how can I get things cleaned up around this perl issue?  It looks like
>> most other ports installed fine, before getting to perl and perl libraries.
>> 
>> --Adam

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.macosforge.org/pipermail/macports-dev/attachments/20151216/c627d9ae/attachment-0001.html>