[MacPorts] #13448: dbus-glib is not building (0% CPU no error
messages) when building Gimp2
MacPorts
trac at macosforge.org
Thu Nov 29 22:09:24 PST 2007
#13448: dbus-glib is not building (0% CPU no error messages) when building Gimp2
----------------------------------------+-----------------------------------
Reporter: poubelle.beslin at orange.fr | Owner: macports-dev at lists.macosforge.org
Type: defect | Status: new
Priority: Normal | Milestone: Port Bugs
Component: ports | Version: 1.5.2
Resolution: | Keywords:
----------------------------------------+-----------------------------------
Changes (by jmpp at macports.org):
* milestone: => Port Bugs
Old description:
> When building the Gimp 2 the building process stops with dbus-glib. No
> error messages are displayed and the CPU is 0% (iddle).
>
> Configuration is iBook / G4 / 12" / 1.2GHz / 1.25 Gb / Tiger
>
> Here is the output on the terminal
> "sudo port install gimp2
> Password:
> ---> Fetching aalib
> ---> Attempting to fetch aalib-1.4rc5.tar.gz from
> ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
> ---> Verifying checksum(s) for aalib
> ---> Extracting aalib
> ---> Applying patches to aalib
> ---> Configuring aalib
> ---> Building aalib with target all
> ---> Staging aalib into destroot
> ---> Installing aalib 1.4rc5_2
> ---> Activating aalib 1.4rc5_2
> ---> Cleaning aalib
> ---> Fetching curl
> ---> Attempting to fetch curl-7.17.1.tar.bz2 from
> http://curl.haxx.se/download/
> ---> Verifying checksum(s) for curl
> ---> Extracting curl
> ---> Configuring curl
> ---> Building curl with target all
> ---> Staging curl into destroot
> ---> Installing curl 7.17.1_0+darwin_8
> ---> Activating curl 7.17.1_0+darwin_8
> ---> Cleaning curl
> ---> Fetching libart_lgpl
> ---> Attempting to fetch libart_lgpl-2.3.19.tar.bz2 from
> http://mandril.creatis.insa-
> lyon.fr/linux/gnome.org/sources/libart_lgpl/2.3/
> ---> Verifying checksum(s) for libart_lgpl
> ---> Extracting libart_lgpl
> ---> Applying patches to libart_lgpl
> ---> Configuring libart_lgpl
> ---> Building libart_lgpl with target all
> ---> Staging libart_lgpl into destroot
> ---> Installing libart_lgpl 2.3.19_2
> ---> Activating libart_lgpl 2.3.19_2
> ---> Cleaning libart_lgpl
> ---> Fetching libexif
> ---> Attempting to fetch libexif-0.6.16.tar.bz2 from
> http://downloads.sourceforge.net/libexif
> ---> Verifying checksum(s) for libexif
> ---> Extracting libexif
> ---> Configuring libexif
> ---> Building libexif with target all
> ^[[A---> Staging libexif into destroot
> ---> Installing libexif 0.6.16_1
> ---> Activating libexif 0.6.16_1
> ---> Cleaning libexif
> ---> Fetching libgpg-error
> ---> Attempting to fetch libgpg-error-1.6.tar.bz2 from
> http://ftp.gnupg.org/gcrypt/libgpg-error
> ---> Verifying checksum(s) for libgpg-error
> ---> Extracting libgpg-error
> ---> Configuring libgpg-error
> ---> Building libgpg-error with target all
> ---> Staging libgpg-error into destroot
> ---> Installing libgpg-error 1.6_0
> ---> Activating libgpg-error 1.6_0
> ---> Cleaning libgpg-error
> ---> Fetching libgcrypt
> ---> Attempting to fetch libgcrypt-1.2.4.tar.bz2 from
> http://ftp.gnupg.org/gcrypt/libgcrypt
> ---> Verifying checksum(s) for libgcrypt
> ---> Extracting libgcrypt
> ---> Configuring libgcrypt
> ---> Building libgcrypt with target all
> ---> Staging libgcrypt into destroot
> ---> Installing libgcrypt 1.2.4_1+darwin_8
> ---> Activating libgcrypt 1.2.4_1+darwin_8
> ---> Cleaning libgcrypt
> ---> Fetching perl5.8
> ---> Attempting to fetch perl-5.8.8.tar.bz2 from
> http://www.cpan.org/src/5.0/
> ---> Verifying checksum(s) for perl5.8
> ---> Extracting perl5.8
> ---> Applying patches to perl5.8
> ---> Configuring perl5.8
> ---> Building perl5.8 with target all
> ---> Staging perl5.8 into destroot
> ---> Installing perl5.8 5.8.8_0+darwin_8
> ---> Activating perl5.8 5.8.8_0+darwin_8
> ---> Cleaning perl5.8
> ---> Fetching p5-xml-parser
> ---> Attempting to fetch XML-Parser-2.35.tar.gz from
> http://ftp.ucr.ac.cr/Unix/CPAN/modules/by-module/XML
> ---> Verifying checksum(s) for p5-xml-parser
> ---> Extracting p5-xml-parser
> ---> Configuring p5-xml-parser
> ---> Building p5-xml-parser with target all
> ---> Staging p5-xml-parser into destroot
> ---> Installing p5-xml-parser 2.35_0
> ---> Activating p5-xml-parser 2.35_0
> ---> Cleaning p5-xml-parser
> ---> Fetching gnome-keyring
> ---> Attempting to fetch gnome-keyring-2.20.1.tar.bz2 from
> http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome-
> keyring/2.20/
> ---> Verifying checksum(s) for gnome-keyring
> ---> Extracting gnome-keyring
> ---> Configuring gnome-keyring
> ---> Building gnome-keyring with target all
> ---> Staging gnome-keyring into destroot
> ---> Installing gnome-keyring 2.20.1_0
> ---> Activating gnome-keyring 2.20.1_0
> ---> Cleaning gnome-keyring
> ---> Fetching xmlcatmgr
> ---> Attempting to fetch xmlcatmgr-2.2.tar.gz from
> ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
> ---> Verifying checksum(s) for xmlcatmgr
> ---> Extracting xmlcatmgr
> ---> Configuring xmlcatmgr
> ---> Building xmlcatmgr with target all
> ---> Staging xmlcatmgr into destroot
> ---> Installing xmlcatmgr 2.2_1
> ---> Activating xmlcatmgr 2.2_1
> ---> Cleaning xmlcatmgr
> ---> Fetching docbook-xml-4.1.2
> ---> Attempting to fetch docbkx412.zip from http://www.oasis-
> open.org/docbook/xml/4.1.2/
> ---> Verifying checksum(s) for docbook-xml-4.1.2
> ---> Extracting docbook-xml-4.1.2
> ---> Configuring docbook-xml-4.1.2
> ---> Building docbook-xml-4.1.2 with target all
> ---> Staging docbook-xml-4.1.2 into destroot
> ---> Installing docbook-xml-4.1.2 4.1.2_1
> ---> Activating docbook-xml-4.1.2 4.1.2_1
> ######################################################################
> # As MacPorts does not currently have a post-deactivate hook,
> # you will need to ensure that you manually remove the catalog
> # entry for this port when you uninstall it. To do so, run
> # "xmlcatmgr remove nextCatalog
> /opt/local/share/xml/docbook/4.1.2/catalog.xml".
> ######################################################################
> ---> Cleaning docbook-xml-4.1.2
> ---> Fetching libxml2
> ---> Attempting to fetch libxml2-2.6.30.tar.gz from
> http://xmlsoft.org/sources/
> ---> Verifying checksum(s) for libxml2
> ---> Extracting libxml2
> ---> Configuring libxml2
> ---> Building libxml2 with target all
> ---> Staging libxml2 into destroot
> ---> Installing libxml2 2.6.30_0
> ---> Activating libxml2 2.6.30_0
> ---> Cleaning libxml2
> ---> Fetching docbook-xml-4.2
> ---> Attempting to fetch docbook-xml-4.2.zip from http://www.oasis-
> open.org/docbook/xml/4.2/
> ---> Verifying checksum(s) for docbook-xml-4.2
> ---> Extracting docbook-xml-4.2
> ---> Configuring docbook-xml-4.2
> ---> Building docbook-xml-4.2 with target all
> ---> Staging docbook-xml-4.2 into destroot
> ---> Installing docbook-xml-4.2 4.2_0
> ---> Activating docbook-xml-4.2 4.2_0
> ######################################################################
> # As MacPorts does not currently have a post-deactivate hook,
> # you will need to ensure that you manually remove the catalog
> # entry for this port when you uninstall it. To do so, run
> # "xmlcatmgr remove nextCatalog
> /opt/local/share/xml/docbook/4.2/catalog.xml".
> ######################################################################
> ---> Cleaning docbook-xml-4.2
> ---> Fetching docbook-xsl
> ---> Attempting to fetch docbook-xsl-1.72.0.tar.bz2 from
> http://downloads.sourceforge.net/docbook
> ---> Verifying checksum(s) for docbook-xsl
> ---> Extracting docbook-xsl
> ---> Configuring docbook-xsl
> ---> Building docbook-xsl with target all
> ---> Staging docbook-xsl into destroot
> ---> Installing docbook-xsl 1.72.0_0
> ---> Activating docbook-xsl 1.72.0_0
> ######################################################################
> # As MacPorts does not currently have a post-deactivate hook,
> # you will need to ensure that you manually remove the catalog
> # entry for this port when you uninstall it. To do so, run
> # "xmlcatmgr remove nextCatalog /opt/local/share/xsl/docbook-
> xsl/catalog.xml".
> ######################################################################
> ---> Cleaning docbook-xsl
> ---> Fetching getopt
> ---> Attempting to fetch getopt-1.1.4.tar.gz from
> http://software.frodo.looijaard.name/getopt/files/
> ---> Verifying checksum(s) for getopt
> ---> Extracting getopt
> ---> Applying patches to getopt
> ---> Configuring getopt
> ---> Building getopt with target all
> ---> Staging getopt into destroot
> ---> Installing getopt 1.1.4_1
> ---> Activating getopt 1.1.4_1
> ---> Cleaning getopt
> ---> Fetching libxslt
> ---> Attempting to fetch libxslt-1.1.22.tar.gz from
> ftp://xmlsoft.org/libxslt/
> ---> Verifying checksum(s) for libxslt
> ---> Extracting libxslt
> ---> Configuring libxslt
> ---> Building libxslt with target all
> ---> Staging libxslt into destroot
> ---> Installing libxslt 1.1.22_0
> ---> Activating libxslt 1.1.22_0
> ---> Cleaning libxslt
> ---> Fetching xmlto
> ---> Attempting to fetch xmlto-0.0.18.tar.bz2 from
> http://cyberelk.net/tim/data/xmlto/stable/
> ---> Verifying checksum(s) for xmlto
> ---> Extracting xmlto
> ---> Configuring xmlto
> ---> Building xmlto with target all
> ---> Staging xmlto into destroot
> ---> Installing xmlto 0.0.18_3
> ---> Activating xmlto 0.0.18_3
> ---> Cleaning xmlto
> ---> Fetching dbus
> ---> Attempting to fetch dbus-1.0.2.tar.gz from
> http://dbus.freedesktop.org/releases/dbus
> ---> Verifying checksum(s) for dbus
> ---> Extracting dbus
> ---> Configuring dbus
> ---> Building dbus with target all
> ---> Staging dbus into destroot
> ---> Creating launchd control script
> ###########################################################
> # A startup item has been generated that will aid in
> # starting dbus with launchd. It is disabled
> # by default. Execute the following command to start it,
> # and to cause it to launch at startup:
> #
> # sudo launchctl load -w /Library/LaunchDaemons/org.macports.dbus.plist
> ###########################################################
> ---> Installing dbus 1.0.2_2
> ---> Activating dbus 1.0.2_2
> ---> Cleaning dbus
> ---> Fetching dbus-glib
> ---> Attempting to fetch dbus-glib-0.74.tar.gz from
> http://dbus.freedesktop.org/releases/dbus-glib
> ---> Verifying checksum(s) for dbus-glib
> ---> Extracting dbus-glib
> ---> Configuring dbus-glib
> ---> Building dbus-glib with target all"
New description:
When building the Gimp 2 the building process stops with dbus-glib. No
error messages are displayed and the CPU is 0% (iddle).
Configuration is iBook / G4 / 12" / 1.2GHz / 1.25 Gb / Tiger
Here is the output on the terminal:
{{{
"sudo port install gimp2
Password:
---> Fetching aalib
---> Attempting to fetch aalib-1.4rc5.tar.gz from
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
---> Verifying checksum(s) for aalib
---> Extracting aalib
---> Applying patches to aalib
---> Configuring aalib
---> Building aalib with target all
---> Staging aalib into destroot
---> Installing aalib 1.4rc5_2
---> Activating aalib 1.4rc5_2
---> Cleaning aalib
---> Fetching curl
---> Attempting to fetch curl-7.17.1.tar.bz2 from
http://curl.haxx.se/download/
---> Verifying checksum(s) for curl
---> Extracting curl
---> Configuring curl
---> Building curl with target all
---> Staging curl into destroot
---> Installing curl 7.17.1_0+darwin_8
---> Activating curl 7.17.1_0+darwin_8
---> Cleaning curl
---> Fetching libart_lgpl
---> Attempting to fetch libart_lgpl-2.3.19.tar.bz2 from
http://mandril.creatis.insa-
lyon.fr/linux/gnome.org/sources/libart_lgpl/2.3/
---> Verifying checksum(s) for libart_lgpl
---> Extracting libart_lgpl
---> Applying patches to libart_lgpl
---> Configuring libart_lgpl
---> Building libart_lgpl with target all
---> Staging libart_lgpl into destroot
---> Installing libart_lgpl 2.3.19_2
---> Activating libart_lgpl 2.3.19_2
---> Cleaning libart_lgpl
---> Fetching libexif
---> Attempting to fetch libexif-0.6.16.tar.bz2 from
http://downloads.sourceforge.net/libexif
---> Verifying checksum(s) for libexif
---> Extracting libexif
---> Configuring libexif
---> Building libexif with target all
^[[A---> Staging libexif into destroot
---> Installing libexif 0.6.16_1
---> Activating libexif 0.6.16_1
---> Cleaning libexif
---> Fetching libgpg-error
---> Attempting to fetch libgpg-error-1.6.tar.bz2 from
http://ftp.gnupg.org/gcrypt/libgpg-error
---> Verifying checksum(s) for libgpg-error
---> Extracting libgpg-error
---> Configuring libgpg-error
---> Building libgpg-error with target all
---> Staging libgpg-error into destroot
---> Installing libgpg-error 1.6_0
---> Activating libgpg-error 1.6_0
---> Cleaning libgpg-error
---> Fetching libgcrypt
---> Attempting to fetch libgcrypt-1.2.4.tar.bz2 from
http://ftp.gnupg.org/gcrypt/libgcrypt
---> Verifying checksum(s) for libgcrypt
---> Extracting libgcrypt
---> Configuring libgcrypt
---> Building libgcrypt with target all
---> Staging libgcrypt into destroot
---> Installing libgcrypt 1.2.4_1+darwin_8
---> Activating libgcrypt 1.2.4_1+darwin_8
---> Cleaning libgcrypt
---> Fetching perl5.8
---> Attempting to fetch perl-5.8.8.tar.bz2 from
http://www.cpan.org/src/5.0/
---> Verifying checksum(s) for perl5.8
---> Extracting perl5.8
---> Applying patches to perl5.8
---> Configuring perl5.8
---> Building perl5.8 with target all
---> Staging perl5.8 into destroot
---> Installing perl5.8 5.8.8_0+darwin_8
---> Activating perl5.8 5.8.8_0+darwin_8
---> Cleaning perl5.8
---> Fetching p5-xml-parser
---> Attempting to fetch XML-Parser-2.35.tar.gz from
http://ftp.ucr.ac.cr/Unix/CPAN/modules/by-module/XML
---> Verifying checksum(s) for p5-xml-parser
---> Extracting p5-xml-parser
---> Configuring p5-xml-parser
---> Building p5-xml-parser with target all
---> Staging p5-xml-parser into destroot
---> Installing p5-xml-parser 2.35_0
---> Activating p5-xml-parser 2.35_0
---> Cleaning p5-xml-parser
---> Fetching gnome-keyring
---> Attempting to fetch gnome-keyring-2.20.1.tar.bz2 from
http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome-
keyring/2.20/
---> Verifying checksum(s) for gnome-keyring
---> Extracting gnome-keyring
---> Configuring gnome-keyring
---> Building gnome-keyring with target all
---> Staging gnome-keyring into destroot
---> Installing gnome-keyring 2.20.1_0
---> Activating gnome-keyring 2.20.1_0
---> Cleaning gnome-keyring
---> Fetching xmlcatmgr
---> Attempting to fetch xmlcatmgr-2.2.tar.gz from
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
---> Verifying checksum(s) for xmlcatmgr
---> Extracting xmlcatmgr
---> Configuring xmlcatmgr
---> Building xmlcatmgr with target all
---> Staging xmlcatmgr into destroot
---> Installing xmlcatmgr 2.2_1
---> Activating xmlcatmgr 2.2_1
---> Cleaning xmlcatmgr
---> Fetching docbook-xml-4.1.2
---> Attempting to fetch docbkx412.zip from http://www.oasis-
open.org/docbook/xml/4.1.2/
---> Verifying checksum(s) for docbook-xml-4.1.2
---> Extracting docbook-xml-4.1.2
---> Configuring docbook-xml-4.1.2
---> Building docbook-xml-4.1.2 with target all
---> Staging docbook-xml-4.1.2 into destroot
---> Installing docbook-xml-4.1.2 4.1.2_1
---> Activating docbook-xml-4.1.2 4.1.2_1
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog
/opt/local/share/xml/docbook/4.1.2/catalog.xml".
######################################################################
---> Cleaning docbook-xml-4.1.2
---> Fetching libxml2
---> Attempting to fetch libxml2-2.6.30.tar.gz from
http://xmlsoft.org/sources/
---> Verifying checksum(s) for libxml2
---> Extracting libxml2
---> Configuring libxml2
---> Building libxml2 with target all
---> Staging libxml2 into destroot
---> Installing libxml2 2.6.30_0
---> Activating libxml2 2.6.30_0
---> Cleaning libxml2
---> Fetching docbook-xml-4.2
---> Attempting to fetch docbook-xml-4.2.zip from http://www.oasis-
open.org/docbook/xml/4.2/
---> Verifying checksum(s) for docbook-xml-4.2
---> Extracting docbook-xml-4.2
---> Configuring docbook-xml-4.2
---> Building docbook-xml-4.2 with target all
---> Staging docbook-xml-4.2 into destroot
---> Installing docbook-xml-4.2 4.2_0
---> Activating docbook-xml-4.2 4.2_0
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog
/opt/local/share/xml/docbook/4.2/catalog.xml".
######################################################################
---> Cleaning docbook-xml-4.2
---> Fetching docbook-xsl
---> Attempting to fetch docbook-xsl-1.72.0.tar.bz2 from
http://downloads.sourceforge.net/docbook
---> Verifying checksum(s) for docbook-xsl
---> Extracting docbook-xsl
---> Configuring docbook-xsl
---> Building docbook-xsl with target all
---> Staging docbook-xsl into destroot
---> Installing docbook-xsl 1.72.0_0
---> Activating docbook-xsl 1.72.0_0
######################################################################
# As MacPorts does not currently have a post-deactivate hook,
# you will need to ensure that you manually remove the catalog
# entry for this port when you uninstall it. To do so, run
# "xmlcatmgr remove nextCatalog /opt/local/share/xsl/docbook-
xsl/catalog.xml".
######################################################################
---> Cleaning docbook-xsl
---> Fetching getopt
---> Attempting to fetch getopt-1.1.4.tar.gz from
http://software.frodo.looijaard.name/getopt/files/
---> Verifying checksum(s) for getopt
---> Extracting getopt
---> Applying patches to getopt
---> Configuring getopt
---> Building getopt with target all
---> Staging getopt into destroot
---> Installing getopt 1.1.4_1
---> Activating getopt 1.1.4_1
---> Cleaning getopt
---> Fetching libxslt
---> Attempting to fetch libxslt-1.1.22.tar.gz from
ftp://xmlsoft.org/libxslt/
---> Verifying checksum(s) for libxslt
---> Extracting libxslt
---> Configuring libxslt
---> Building libxslt with target all
---> Staging libxslt into destroot
---> Installing libxslt 1.1.22_0
---> Activating libxslt 1.1.22_0
---> Cleaning libxslt
---> Fetching xmlto
---> Attempting to fetch xmlto-0.0.18.tar.bz2 from
http://cyberelk.net/tim/data/xmlto/stable/
---> Verifying checksum(s) for xmlto
---> Extracting xmlto
---> Configuring xmlto
---> Building xmlto with target all
---> Staging xmlto into destroot
---> Installing xmlto 0.0.18_3
---> Activating xmlto 0.0.18_3
---> Cleaning xmlto
---> Fetching dbus
---> Attempting to fetch dbus-1.0.2.tar.gz from
http://dbus.freedesktop.org/releases/dbus
---> Verifying checksum(s) for dbus
---> Extracting dbus
---> Configuring dbus
---> Building dbus with target all
---> Staging dbus into destroot
---> Creating launchd control script
###########################################################
# A startup item has been generated that will aid in
# starting dbus with launchd. It is disabled
# by default. Execute the following command to start it,
# and to cause it to launch at startup:
#
# sudo launchctl load -w /Library/LaunchDaemons/org.macports.dbus.plist
###########################################################
---> Installing dbus 1.0.2_2
---> Activating dbus 1.0.2_2
---> Cleaning dbus
---> Fetching dbus-glib
---> Attempting to fetch dbus-glib-0.74.tar.gz from
http://dbus.freedesktop.org/releases/dbus-glib
---> Verifying checksum(s) for dbus-glib
---> Extracting dbus-glib
---> Configuring dbus-glib
---> Building dbus-glib with target all"
}}}
--
Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13448#comment:3>
MacPorts </projects/macports>
Ports system for Mac OS
More information about the macports-tickets
mailing list