[MacPorts] #22762: qtpfsgui fails to build

[MacPorts]

#22762: qtpfsgui fails to build
---------------------------------+------------------------------------------
 Reporter:  adamlogan@…          |       Owner:  macports-tickets@…                   
     Type:  defect               |      Status:  new                                  
 Priority:  Normal               |   Milestone:                                       
Component:  ports                |     Version:  1.8.1                                
 Keywords:                       |        Port:  qtpfsgui                             
---------------------------------+------------------------------------------
 I get the following error when installing qtpfsgui. Everything else up to
 this point was fine. I started the installation as an admin user, aborted
 the installation, then repeated the command with sudo.


 {{{
 adamlogan:~ adamlogan$ port install qtpfsgui
 MacPorts running without privileges. You may be unable to complete certain
 actions (eg install).
 --->  Computing dependencies for qtpfsgui
 MacPorts running without privileges. You may be unable to complete certain
 actions (eg install).
 --->  Fetching expat
 ^C
 adamlogan:~ adamlogan$ sudo port install qtpfsgui
 Password:
 --->  Computing dependencies for qtpfsgui
 --->  Fetching expat
 --->  Attempting to fetch expat-2.0.1.tar.gz from
 http://internap.dl.sourceforge.net/expat
 --->  Verifying checksum(s) for expat
 --->  Extracting expat
 --->  Configuring expat
 --->  Building expat
 --->  Staging expat into destroot
 --->  Installing expat @2.0.1_0
 --->  Activating expat @2.0.1_0
 --->  Cleaning expat
 --->  Fetching gperf
 --->  Attempting to fetch gperf-3.0.4.tar.gz from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gperf
 --->  Verifying checksum(s) for gperf
 --->  Extracting gperf
 --->  Configuring gperf
 --->  Building gperf
 --->  Staging gperf into destroot
 --->  Installing gperf @3.0.4_0
 --->  Activating gperf @3.0.4_0
 --->  Cleaning gperf
 --->  Fetching libiconv
 --->  Attempting to fetch libiconv-1.13.tar.gz from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/libiconv
 --->  Verifying checksum(s) for libiconv
 --->  Extracting libiconv
 --->  Applying patches to libiconv
 --->  Configuring libiconv
 --->  Building libiconv
 --->  Staging libiconv into destroot
 --->  Installing libiconv @1.13_0
 --->  Activating libiconv @1.13_0
 --->  Cleaning libiconv
 --->  Fetching ncursesw
 --->  Attempting to fetch ncurses-5.7.tar.gz from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/ncurses
 --->  Verifying checksum(s) for ncursesw
 --->  Extracting ncursesw
 --->  Configuring ncursesw
 --->  Building ncursesw
 --->  Staging ncursesw into destroot
 --->  Installing ncursesw @5.7_0+darwin_10
 --->  Activating ncursesw @5.7_0+darwin_10
 --->  Cleaning ncursesw
 --->  Fetching ncurses
 --->  Verifying checksum(s) for ncurses
 --->  Extracting ncurses
 --->  Configuring ncurses
 --->  Building ncurses
 --->  Staging ncurses into destroot
 --->  Installing ncurses @5.7_0+darwin_10
 --->  Activating ncurses @5.7_0+darwin_10
 --->  Cleaning ncurses
 --->  Fetching gettext
 --->  Attempting to fetch gettext-0.17.tar.gz from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gettext
 --->  Verifying checksum(s) for gettext
 --->  Extracting gettext
 --->  Applying patches to gettext
 --->  Configuring gettext
 --->  Building gettext
 --->  Staging gettext into destroot
 --->  Installing gettext @0.17_4
 --->  Activating gettext @0.17_4
 --->  Cleaning gettext
 --->  Fetching perl5.8
 --->  Attempting to fetch perl-5.8.9.tar.bz2 from http://www.cpan.org/src/
 --->  Verifying checksum(s) for perl5.8
 --->  Extracting perl5.8
 --->  Applying patches to perl5.8
 --->  Configuring perl5.8
 --->  Building perl5.8
 --->  Staging perl5.8 into destroot
 --->  Installing perl5.8 @5.8.9_3
 --->  Activating perl5.8 @5.8.9_3
 --->  Cleaning perl5.8
 --->  Fetching perl5
 --->  Verifying checksum(s) for perl5
 --->  Extracting perl5
 --->  Configuring perl5
 --->  Building perl5
 --->  Staging perl5 into destroot
 --->  Installing perl5 @5.8.9_0
 --->  Activating perl5 @5.8.9_0
 --->  Cleaning perl5
 --->  Fetching p5-locale-gettext
 --->  Attempting to fetch gettext-1.05.tar.gz from
 ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Locale
 --->  Verifying checksum(s) for p5-locale-gettext
 --->  Extracting p5-locale-gettext
 --->  Applying patches to p5-locale-gettext
 --->  Configuring p5-locale-gettext
 --->  Building p5-locale-gettext
 --->  Staging p5-locale-gettext into destroot
 --->  Installing p5-locale-gettext @1.05_0
 --->  Activating p5-locale-gettext @1.05_0
 --->  Cleaning p5-locale-gettext
 --->  Fetching help2man
 --->  Attempting to fetch help2man-1.36.4.tar.gz from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/help2man
 --->  Verifying checksum(s) for help2man
 --->  Extracting help2man
 --->  Applying patches to help2man
 --->  Configuring help2man
 --->  Building help2man
 --->  Staging help2man into destroot
 --->  Installing help2man @1.36.4_1
 --->  Activating help2man @1.36.4_1
 --->  Cleaning help2man
 --->  Fetching m4
 --->  Attempting to fetch m4-1.4.13.tar.bz2 from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/m4
 --->  Verifying checksum(s) for m4
 --->  Extracting m4
 --->  Applying patches to m4
 --->  Configuring m4
 --->  Building m4
 --->  Staging m4 into destroot
 --->  Installing m4 @1.4.13_0
 --->  Activating m4 @1.4.13_0
 --->  Cleaning m4
 --->  Fetching autoconf
 --->  Attempting to fetch autoconf-2.65.tar.bz2 from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/autoconf
 --->  Verifying checksum(s) for autoconf
 --->  Extracting autoconf
 --->  Configuring autoconf
 --->  Building autoconf
 --->  Staging autoconf into destroot
 --->  Installing autoconf @2.65_0
 --->  Activating autoconf @2.65_0
 --->  Cleaning autoconf
 --->  Fetching automake
 --->  Attempting to fetch automake-1.11.tar.bz2 from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/automake
 --->  Verifying checksum(s) for automake
 --->  Extracting automake
 --->  Configuring automake
 --->  Building automake
 --->  Staging automake into destroot
 --->  Installing automake @1.11_0
 --->  Activating automake @1.11_0
 --->  Cleaning automake
 --->  Fetching libtool
 --->  Attempting to fetch libtool-2.2.6b.tar.gz from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/libtool
 --->  Verifying checksum(s) for libtool
 --->  Extracting libtool
 --->  Configuring libtool
 --->  Building libtool
 --->  Staging libtool into destroot
 --->  Installing libtool @2.2.6b_0
 --->  Activating libtool @2.2.6b_0
 --->  Cleaning libtool
 --->  Fetching zlib
 --->  Attempting to fetch zlib-1.2.3.tar.bz2 from http://www.zlib.net/
 --->  Verifying checksum(s) for zlib
 --->  Extracting zlib
 --->  Applying patches to zlib
 --->  Configuring zlib
 --->  Building zlib
 --->  Staging zlib into destroot
 --->  Installing zlib @1.2.3_3
 --->  Activating zlib @1.2.3_3
 --->  Cleaning zlib
 --->  Fetching exiv2
 --->  Attempting to fetch exiv2-0.18.2.tar.gz from
 http://distfiles.macports.org/exiv2
 --->  Verifying checksum(s) for exiv2
 --->  Extracting exiv2
 --->  Configuring exiv2
 --->  Building exiv2
 --->  Staging exiv2 into destroot
 --->  Installing exiv2 @0.18.2_0
 --->  Activating exiv2 @0.18.2_0
 --->  Cleaning exiv2
 --->  Fetching fftw-3
 --->  Attempting to fetch fftw-3.2.2.tar.gz from http://www.fftw.org/
 --->  Verifying checksum(s) for fftw-3
 --->  Extracting fftw-3
 --->  Configuring fftw-3
 --->  Building fftw-3
 --->  Staging fftw-3 into destroot
 --->  Installing fftw-3 @3.2.2_0+i386
 --->  Activating fftw-3 @3.2.2_0+i386
 --->  Cleaning fftw-3
 --->  Fetching fftw-3-single
 --->  Verifying checksum(s) for fftw-3-single
 --->  Extracting fftw-3-single
 --->  Configuring fftw-3-single
 --->  Building fftw-3-single
 --->  Staging fftw-3-single into destroot
 --->  Installing fftw-3-single @3.2.2_0+i386
 --->  Activating fftw-3-single @3.2.2_0+i386
 --->  Cleaning fftw-3-single
 --->  Fetching gsed
 --->  Attempting to fetch sed-4.2.1.tar.gz from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/sed
 --->  Verifying checksum(s) for gsed
 --->  Extracting gsed
 --->  Configuring gsed
 --->  Building gsed
 --->  Staging gsed into destroot
 --->  Installing gsed @4.2.1_0
 --->  Activating gsed @4.2.1_0
 --->  Cleaning gsed
 --->  Fetching ilmbase
 --->  Attempting to fetch ilmbase-1.0.1.tar.gz from
 http://savannah.nongnu.org/download/openexr
 --->  Verifying checksum(s) for ilmbase
 --->  Extracting ilmbase
 --->  Applying patches to ilmbase
 --->  Configuring ilmbase
 --->  Building ilmbase
 --->  Staging ilmbase into destroot
 --->  Installing ilmbase @1.0.1_2
 --->  Activating ilmbase @1.0.1_2
 --->  Cleaning ilmbase
 --->  Fetching openexr
 --->  Attempting to fetch openexr-1.6.1.tar.gz from
 http://savannah.nongnu.org/download/openexr
 --->  Verifying checksum(s) for openexr
 --->  Extracting openexr
 --->  Applying patches to openexr
 --->  Configuring openexr
 --->  Building openexr
 --->  Staging openexr into destroot
 --->  Installing openexr @1.6.1_1
 --->  Activating openexr @1.6.1_1
 --->  Cleaning openexr
 --->  Fetching pkgconfig
 --->  Attempting to fetch pkg-config-0.23.tar.gz from
 http://www.vg.kernel.org/pub/mirrors/gentoo/source/distfiles/
 --->  Verifying checksum(s) for pkgconfig
 --->  Extracting pkgconfig
 --->  Configuring pkgconfig
 --->  Building pkgconfig
 --->  Staging pkgconfig into destroot
 --->  Installing pkgconfig @0.23_1
 --->  Activating pkgconfig @0.23_1
 --->  Cleaning pkgconfig
 --->  Fetching dbus
 --->  Attempting to fetch dbus-1.2.16.tar.gz from
 http://distfiles.macports.org/dbus
 --->  Verifying checksum(s) for dbus
 --->  Extracting dbus
 --->  Applying patches to dbus
 --->  Configuring dbus
 --->  Building dbus
 --->  Staging dbus into destroot
 --->  Installing dbus @1.2.16_1
 --->  Activating dbus @1.2.16_1
 #################################################################################################
 # Startup items have been generated that will aid in
 # starting dbus with launchd. They are disabled
 # by default. Execute the following command to start them,
 # and to cause it to launch at startup:
 #
 # sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-
 system.plist
 # launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-
 session.plist
 ##################################################################################################
 --->  Cleaning dbus
 --->  Fetching jpeg
 --->  Attempting to fetch jpegsrc.v6b.tar.gz from
 ftp://ftp.uu.net/graphics/jpeg
 --->  Attempting to fetch jpegsrc.v6b.tar.gz from http://www.ijg.org/files
 --->  Attempting to fetch jpegsrc.v6b.tar.gz from
 http://distfiles.macports.org/jpeg
 --->  Attempting to fetch droppatch.tar.gz from
 http://distfiles.macports.org/jpeg
 --->  Verifying checksum(s) for jpeg
 --->  Extracting jpeg
 --->  Applying patches to jpeg
 --->  Configuring jpeg
 --->  Building jpeg
 --->  Staging jpeg into destroot
 --->  Installing jpeg @6b_3
 --->  Activating jpeg @6b_3
 --->  Cleaning jpeg
 --->  Fetching tiff
 --->  Attempting to fetch tiff-3.9.2.tar.gz from
 ftp://ftp5.freebsd.org/pub/FreeBSD/ports/distfiles/
 --->  Verifying checksum(s) for tiff
 --->  Extracting tiff
 --->  Applying patches to tiff
 --->  Configuring tiff
 --->  Building tiff
 --->  Staging tiff into destroot
 --->  Installing tiff @3.9.2_0+macosx
 --->  Activating tiff @3.9.2_0+macosx
 --->  Cleaning tiff
 --->  Fetching lcms
 --->  Attempting to fetch lcms-1.18a.tar.gz from
 http://voxel.dl.sourceforge.net/lcms
 --->  Verifying checksum(s) for lcms
 --->  Extracting lcms
 --->  Configuring lcms
 --->  Building lcms
 --->  Staging lcms into destroot
 --->  Installing lcms @1.18a_0
 --->  Activating lcms @1.18a_0
 --->  Cleaning lcms
 --->  Fetching libmng
 --->  Attempting to fetch libmng-1.0.10.tar.gz from
 http://internap.dl.sourceforge.net/libmng
 --->  Verifying checksum(s) for libmng
 --->  Extracting libmng
 --->  Configuring libmng
 --->  Building libmng
 --->  Staging libmng into destroot
 --->  Installing libmng @1.0.10_0
 --->  Activating libmng @1.0.10_0
 --->  Cleaning libmng
 --->  Fetching libpng
 --->  Attempting to fetch libpng-1.2.40.tar.bz2 from
 http://internap.dl.sourceforge.net/libpng
 --->  Verifying checksum(s) for libpng
 --->  Extracting libpng
 --->  Configuring libpng
 --->  Building libpng
 --->  Staging libpng into destroot
 --->  Installing libpng @1.2.40_0
 --->  Activating libpng @1.2.40_0
 --->  Cleaning libpng
 --->  Fetching openssl
 --->  Attempting to fetch openssl-0.9.8l.tar.gz from
 http://distfiles.macports.org/openssl
 --->  Verifying checksum(s) for openssl
 --->  Extracting openssl
 --->  Applying patches to openssl
 --->  Configuring openssl
 --->  Building openssl
 --->  Staging openssl into destroot
 --->  Installing openssl @0.9.8l_0+darwin
 --->  Activating openssl @0.9.8l_0+darwin
 --->  Cleaning openssl
 --->  Fetching readline
 --->  Attempting to fetch readline-6.0.tar.gz from
 http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/readline
 --->  Verifying checksum(s) for readline
 --->  Extracting readline
 --->  Applying patches to readline
 --->  Configuring readline
 --->  Building readline
 --->  Staging readline into destroot
 --->  Installing readline @6.0.000_2+darwin
 --->  Activating readline @6.0.000_2+darwin
 --->  Cleaning readline
 --->  Fetching sqlite3
 --->  Attempting to fetch sqlite-3.6.20.tar.gz from http://www.sqlite.org/
 --->  Verifying checksum(s) for sqlite3
 --->  Extracting sqlite3
 --->  Configuring sqlite3
 --->  Building sqlite3
 --->  Staging sqlite3 into destroot
 --->  Installing sqlite3 @3.6.20_0
 --->  Activating sqlite3 @3.6.20_0
 --->  Cleaning sqlite3
 --->  Fetching qt4-mac
 --->  Attempting to fetch qt-mac-opensource-src-4.5.3.tar.gz from
 http://distfiles.macports.org/qt4-mac
 --->  Verifying checksum(s) for qt4-mac
 --->  Extracting qt4-mac
 --->  Applying patches to qt4-mac
 --->  Configuring qt4-mac
 --->  Building qt4-mac
 --->  Staging qt4-mac into destroot
 --->  Installing qt4-mac @4.5.3_0+darwin_10
 --->  Activating qt4-mac @4.5.3_0+darwin_10
 --->  Cleaning qt4-mac
 --->  Fetching qtpfsgui
 --->  Attempting to fetch qtpfsgui-1.9.2.tar.gz from
 http://internap.dl.sourceforge.net/qtpfsgui
 --->  Verifying checksum(s) for qtpfsgui
 --->  Extracting qtpfsgui
 --->  Applying patches to qtpfsgui
 --->  Configuring qtpfsgui
 --->  Building qtpfsgui
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_aqua_qtpfsgui/work/qtpfsgui-1.9.2"
 && /usr/bin/make -j2 all " returned error 2
 Command output:       QMap<QString, int>::detach_helper()   in
 preferencesDialog.o
   "QObject::killTimer(int)", referenced from:
       PreviewWidget::mouseReleaseEvent(QMouseEvent*)        in
 previewWidget.o
   "QLabel::text() const", referenced from:
       MainGui::aboutQtpfsgui()      in mainWindow.o
   "QToolBar::addSeparator()", referenced from:
       Ui_MainGui::setupUi(QMainWindow*)       in mainWindow.o
       Ui_MainGui::setupUi(QMainWindow*)       in mainWindow.o
       HdrViewer::HdrViewer(QWidget*, unsigned int, unsigned int, bool)in
 hdrviewer.o
       HdrViewer::HdrViewer(QWidget*, unsigned int, unsigned int, bool)in
 hdrviewer.o
       Ui_TonemappingWindow::setupUi(QMainWindow*)       in
 tonemappingDialog.o
       Ui_TonemappingWindow::setupUi(QMainWindow*)       in
 tonemappingDialog.o
       Ui_TonemappingWindow::setupUi(QMainWindow*)       in
 tonemappingDialog.o
   "QAbstractSlider::maximum() const", referenced from:
       Gang::v2p(float) constin gang.o
       Gang::p2v(int) constin gang.o
   "QString::codecForCStrings", referenced from:
       __ZN7QString16codecForCStringsE$non_lazy_ptr in options.o
       __ZN7QString16codecForCStringsE$non_lazy_ptr in commandline.o
       __ZN7QString16codecForCStringsE$non_lazy_ptr in mainWindow.o
       __ZN7QString16codecForCStringsE$non_lazy_ptr in tonemapping_widget.o
       __ZN7QString16codecForCStringsE$non_lazy_ptr in loadHdrThread.o
       __ZN7QString16codecForCStringsE$non_lazy_ptr in preferencesDialog.o
       __ZN7QString16codecForCStringsE$non_lazy_ptr in newHdrWizard.o
   "QTableWidget::columnCount() const", referenced from:
       Ui_HdrWizardForm::setupUi(QDialog*)      in newHdrWizard.o
 ld: symbol(s) not found for architecture i386
 collect2: ld returned 1 exit status
 lipo: can't open input file: /var/tmp//cc4UFUeB.out (No such file or
 directory)
 make: *** [qtpfsgui.app/Contents/MacOS/qtpfsgui] Error 1

 Error: Status 1 encountered during processing.
 adamlogan:~ adamlogan$
 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/22762>
MacPorts <http://www.macports.org/>
Ports system for Mac OS