[MacPorts] #22999: Installing ufraw fails with gimp problems
MacPorts
noreply at macports.org
Wed Dec 23 03:38:21 PST 2009
#22999: Installing ufraw fails with gimp problems
------------------------------+---------------------------------------------
Reporter: nitai@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: High | Milestone:
Component: ports | Version: 1.8.1
Keywords: ufraw, gimp | Port:
------------------------------+---------------------------------------------
Hi there,
I tried to install ufraw with sudo port install ufraw, but it fails to do
so since many weeks.
I have updated macports, have the correct python version installed
(2.6.1), run gnome-keyring install and just about everything I could find
on the net and on here. still no go.
Please find the detailed error report here with (sudo install -d ufraw)
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port ufraw.
DEBUG: Requested variant i386 is not provided by port ufraw.
DEBUG: Requested variant macosx is not provided by port ufraw.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exiv2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: exiv2 0.18.2_0 exists in the ports tree
DEBUG: exiv2 0.18.2_0 is the latest installed
DEBUG: exiv2 0.18.2_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exiv2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port exiv2.
DEBUG: Requested variant i386 is not provided by port exiv2.
DEBUG: Requested variant macosx is not provided by port exiv2.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_0 exists in the ports tree
DEBUG: libtool 2.2.6b_0 is the latest installed
DEBUG: libtool 2.2.6b_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0 is the latest installed
DEBUG: automake 1.11.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_0 exists in the ports tree
DEBUG: autoconf 2.65_0 is the latest installed
DEBUG: autoconf 2.65_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is the latest installed
DEBUG: perl5 5.8.9_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 is the latest installed
DEBUG: perl5.8 5.8.9_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0 is the latest installed
DEBUG: m4 1.4.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1 is the latest installed
DEBUG: help2man 1.36.4_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0 is the latest installed
DEBUG: p5-locale-gettext 1.05_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 is the latest installed
DEBUG: gettext 0.17_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0 is the latest installed
DEBUG: libiconv 1.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3 is the latest installed
DEBUG: zlib 1.2.3_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: No need to upgrade! exiv2 0.18.2_0 >= exiv2 0.18.2_0
---> Computing dependencies for ufraw
DEBUG: Searching for dependency: gimp2
DEBUG: Didn't find receipt, going to depspec regex for: gimp2
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port gimp2.
DEBUG: Requested variant i386 is not provided by port gimp2.
DEBUG: Requested variant macosx is not provided by port gimp2.
DEBUG: Executing variant x11 provides x11
DEBUG: Searching for dependency: exiv2
DEBUG: Found Dependency: receipt exists for exiv2
DEBUG: Searching for dependency: gtkimageview
DEBUG: Didn't find receipt, going to depspec regex for: gtkimageview
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gtkimageview
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gtkimageview
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gtkimageview.
DEBUG: Requested variant i386 is not provided by port gtkimageview.
DEBUG: Requested variant macosx is not provided by port gtkimageview.
DEBUG: Searching for dependency: iso-codes
DEBUG: Found Dependency: receipt exists for iso-codes
DEBUG: Searching for dependency: gegl
DEBUG: Found Dependency: receipt exists for gegl
DEBUG: Searching for dependency: gtk2
DEBUG: Found Dependency: receipt exists for gtk2
DEBUG: Searching for dependency: libmng
DEBUG: Found Dependency: receipt exists for libmng
DEBUG: Searching for dependency: libexif
DEBUG: Found Dependency: receipt exists for libexif
DEBUG: Searching for dependency: aalib
DEBUG: Found Dependency: receipt exists for aalib
DEBUG: Searching for dependency: librsvg
DEBUG: Found Dependency: receipt exists for librsvg
DEBUG: Searching for dependency: poppler
DEBUG: Found Dependency: receipt exists for poppler
DEBUG: Searching for dependency: gnome-vfs
DEBUG: Found Dependency: receipt exists for gnome-vfs
DEBUG: Searching for dependency: libgnomeui
DEBUG: Found Dependency: receipt exists for libgnomeui
DEBUG: Searching for dependency: curl
DEBUG: Found Dependency: receipt exists for curl
DEBUG: Searching for dependency: libwmf
DEBUG: Found Dependency: receipt exists for libwmf
DEBUG: Searching for dependency: lcms
DEBUG: Found Dependency: receipt exists for lcms
DEBUG: Searching for dependency: dbus-glib
DEBUG: Found Dependency: receipt exists for dbus-glib
DEBUG: Searching for dependency: py25-gtk
DEBUG: Found Dependency: receipt exists for py25-gtk
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: intltool
DEBUG: Found Dependency: receipt exists for intltool
DEBUG: Searching for dependency: p5-xml-parser
DEBUG: Found Dependency: receipt exists for p5-xml-parser
DEBUG: Searching for dependency: gtk2
DEBUG: Found Dependency: receipt exists for gtk2
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: gtk-doc
DEBUG: Found Dependency: receipt exists for gtk-doc
DEBUG: Executing org.macports.main (gimp2)
DEBUG: Skipping completed org.macports.fetch (gimp2)
DEBUG: Skipping completed org.macports.checksum (gimp2)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (gimp2)
DEBUG: Skipping completed org.macports.patch (gimp2)
DEBUG: Skipping completed org.macports.configure (gimp2)
---> Building gimp2
DEBUG: Executing org.macports.build (gimp2)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.7"
&& /usr/bin/make -j2 all'
/usr/bin/make all-recursive
Making all in m4macros
make[2]: Nothing to be done for `all'.
Making all in tools
Making all in pdbgen
make[3]: Nothing to be done for `all-am'.
Making all in cursors
make[2]: Nothing to be done for `all'.
Making all in themes
Making all in Default
Making all in images
Making all in preferences
make[5]: Nothing to be done for `all'.
make[5]: Nothing to be done for `all-am'.
make[4]: Nothing to be done for `all-am'.
Making all in Small
make[3]: Nothing to be done for `all'.
make[3]: Nothing to be done for `all-am'.
Making all in po
make[2]: Nothing to be done for `all'.
Making all in po-libgimp
make[2]: Nothing to be done for `all'.
Making all in po-plug-ins
make[2]: Nothing to be done for `all'.
Making all in po-python
make[2]: Nothing to be done for `all'.
Making all in po-script-fu
make[2]: Nothing to be done for `all'.
Making all in po-tips
make[2]: Nothing to be done for `all'.
Making all in data
Making all in brushes
make[3]: Nothing to be done for `all'.
Making all in environ
make[3]: Nothing to be done for `all'.
Making all in gradients
make[3]: Nothing to be done for `all'.
Making all in images
make[3]: Nothing to be done for `all'.
Making all in interpreters
make[3]: Nothing to be done for `all'.
Making all in palettes
make[3]: Nothing to be done for `all'.
Making all in patterns
make[3]: Nothing to be done for `all'.
Making all in tips
make[3]: Nothing to be done for `all'.
make[3]: Nothing to be done for `all-am'.
Making all in desktop
make[2]: Nothing to be done for `all'.
Making all in menus
make[2]: Nothing to be done for `all'.
Making all in libgimpbase
/bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2
-DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\"
-DDATADIR=\""/opt/local/share/gimp/2.0"\"
-DLOCALEDIR=\""/opt/local/share/locale"\"
-DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\"
-DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF
.deps/gimpcpuaccel.Tpo -c -o gimpcpuaccel.lo gimpcpuaccel.c
/bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2
-DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\"
-DDATADIR=\""/opt/local/share/gimp/2.0"\"
-DLOCALEDIR=\""/opt/local/share/locale"\"
-DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\"
-DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF
.deps/gimpprotocol.Tpo -c -o gimpprotocol.lo gimpprotocol.c
libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I..
-D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\"
-DDATADIR=\"/opt/local/share/gimp/2.0\"
-DLOCALEDIR=\"/opt/local/share/locale\"
-DPLUGINDIR=\"/opt/local/lib/gimp/2.0\"
-DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF
.deps/gimpprotocol.Tpo -c gimpprotocol.c -fno-common -DPIC -o
.libs/gimpprotocol.o
libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I..
-D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\"
-DDATADIR=\"/opt/local/share/gimp/2.0\"
-DLOCALEDIR=\"/opt/local/share/locale\"
-DPLUGINDIR=\"/opt/local/lib/gimp/2.0\"
-DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF
.deps/gimpcpuaccel.Tpo -c gimpcpuaccel.c -fno-common -DPIC -o
.libs/gimpcpuaccel.o
/var/tmp//ccjKuyvi.s:125:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:126:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:127:suffix or operands invalid for `pop'
/var/tmp//ccjKuyvi.s:130:suffix or operands invalid for `push'
/var/tmp//ccjKuyvi.s:131:suffix or operands invalid for `popf'
/var/tmp//ccjKuyvi.s:132:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:133:suffix or operands invalid for `pop'
/var/tmp//ccjKuyvi.s:134:suffix or operands invalid for `popf'
make[2]: *** [gimpcpuaccel.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
mv -f .deps/gimpprotocol.Tpo .deps/gimpprotocol.Plo
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.7"
&& /usr/bin/make -j2 all " returned error 2
Command output: make[3]: Nothing to be done for `all'.
Making all in palettes
make[3]: Nothing to be done for `all'.
Making all in patterns
make[3]: Nothing to be done for `all'.
Making all in tips
make[3]: Nothing to be done for `all'.
make[3]: Nothing to be done for `all-am'.
Making all in desktop
make[2]: Nothing to be done for `all'.
Making all in menus
make[2]: Nothing to be done for `all'.
Making all in libgimpbase
/bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2
-DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\"
-DDATADIR=\""/opt/local/share/gimp/2.0"\"
-DLOCALEDIR=\""/opt/local/share/locale"\"
-DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\"
-DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF
.deps/gimpcpuaccel.Tpo -c -o gimpcpuaccel.lo gimpcpuaccel.c
/bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2
-DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\"
-DDATADIR=\""/opt/local/share/gimp/2.0"\"
-DLOCALEDIR=\""/opt/local/share/locale"\"
-DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\"
-DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF
.deps/gimpprotocol.Tpo -c -o gimpprotocol.lo gimpprotocol.c
libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I..
-D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\"
-DDATADIR=\"/opt/local/share/gimp/2.0\"
-DLOCALEDIR=\"/opt/local/share/locale\"
-DPLUGINDIR=\"/opt/local/lib/gimp/2.0\"
-DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF
.deps/gimpprotocol.Tpo -c gimpprotocol.c -fno-common -DPIC -o
.libs/gimpprotocol.o
libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I..
-D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\"
-DDATADIR=\"/opt/local/share/gimp/2.0\"
-DLOCALEDIR=\"/opt/local/share/locale\"
-DPLUGINDIR=\"/opt/local/lib/gimp/2.0\"
-DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF
.deps/gimpcpuaccel.Tpo -c gimpcpuaccel.c -fno-common -DPIC -o
.libs/gimpcpuaccel.o
/var/tmp//ccjKuyvi.s:125:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:126:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:127:suffix or operands invalid for `pop'
/var/tmp//ccjKuyvi.s:130:suffix or operands invalid for `push'
/var/tmp//ccjKuyvi.s:131:suffix or operands invalid for `popf'
/var/tmp//ccjKuyvi.s:132:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:133:suffix or operands invalid for `pop'
/var/tmp//ccjKuyvi.s:134:suffix or operands invalid for `popf'
make[2]: *** [gimpcpuaccel.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
mv -f .deps/gimpprotocol.Tpo .deps/gimpprotocol.Plo
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.7"
&& /usr/bin/make -j2 all " returned error 2
Command output: make[3]: Nothing to be done for `all'.
Making all in palettes
make[3]: Nothing to be done for `all'.
Making all in patterns
make[3]: Nothing to be done for `all'.
Making all in tips
make[3]: Nothing to be done for `all'.
make[3]: Nothing to be done for `all-am'.
Making all in desktop
make[2]: Nothing to be done for `all'.
Making all in menus
make[2]: Nothing to be done for `all'.
Making all in libgimpbase
/bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2
-DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\"
-DDATADIR=\""/opt/local/share/gimp/2.0"\"
-DLOCALEDIR=\""/opt/local/share/locale"\"
-DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\"
-DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF
.deps/gimpcpuaccel.Tpo -c -o gimpcpuaccel.lo gimpcpuaccel.c
/bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2
-DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\"
-DDATADIR=\""/opt/local/share/gimp/2.0"\"
-DLOCALEDIR=\""/opt/local/share/locale"\"
-DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\"
-DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF
.deps/gimpprotocol.Tpo -c -o gimpprotocol.lo gimpprotocol.c
libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I..
-D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\"
-DDATADIR=\"/opt/local/share/gimp/2.0\"
-DLOCALEDIR=\"/opt/local/share/locale\"
-DPLUGINDIR=\"/opt/local/lib/gimp/2.0\"
-DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF
.deps/gimpprotocol.Tpo -c gimpprotocol.c -fno-common -DPIC -o
.libs/gimpprotocol.o
libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I..
-D_REENTRANT -I/opt/local/include/glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include
-I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\"
-DDATADIR=\"/opt/local/share/gimp/2.0\"
-DLOCALEDIR=\"/opt/local/share/locale\"
-DPLUGINDIR=\"/opt/local/lib/gimp/2.0\"
-DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\"
-DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\"
-DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\"
-I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE
-DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement
-Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith
-Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF
.deps/gimpcpuaccel.Tpo -c gimpcpuaccel.c -fno-common -DPIC -o
.libs/gimpcpuaccel.o
/var/tmp//ccjKuyvi.s:125:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:126:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:127:suffix or operands invalid for `pop'
/var/tmp//ccjKuyvi.s:130:suffix or operands invalid for `push'
/var/tmp//ccjKuyvi.s:131:suffix or operands invalid for `popf'
/var/tmp//ccjKuyvi.s:132:suffix or operands invalid for `pushf'
/var/tmp//ccjKuyvi.s:133:suffix or operands invalid for `pop'
/var/tmp//ccjKuyvi.s:134:suffix or operands invalid for `popf'
make[2]: *** [gimpcpuaccel.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
mv -f .deps/gimpprotocol.Tpo .deps/gimpprotocol.Plo
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for gimp2):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: The following dependencies failed to build: gimp2 gtkimageview
Error: Status 1 encountered during processing.
--
Ticket URL: <http://trac.macports.org/ticket/22999>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list