[MacPorts] #23061: exempi build fails on patch (Snow Leopard 64-bit)
MacPorts
noreply at macports.org
Tue Dec 29 07:24:30 PST 2009
#23061: exempi build fails on patch (Snow Leopard 64-bit)
---------------------------+------------------------------------------------
Reporter: motya@… | Owner: devans@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.1
Keywords: | Port: exempi
---------------------------+------------------------------------------------
Changes (by macsforever2000@…):
* cc: motya@… (removed)
* keywords: snow leopard exempi 64-bit amd64 x86_64 XMP =>
* owner: macports-tickets@… => devans@…
Old description:
> I apologize for Reopening ticket. Despite changes in ticket 62080 I can
> not build exempi even after a complete uninstall ports.
>
> Here's a log of action after a new installation of ports for the snow
> leopard:
>
> {{{
> MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port -v selfupdate
> Password:
> ---> Updating the ports tree
> Synchronizing local ports tree from
> rsync://rsync.macports.org/release/ports/
> receiving file list ... done
>
> sent 36 bytes received 424733 bytes 77230.73 bytes/sec
> total size is 27687253 speedup is 65.18
> ---> Updating MacPorts base sources using rsync
> receiving file list ... done
>
> sent 36 bytes received 6873 bytes 1974.00 bytes/sec
> total size is 4021380 speedup is 582.05
> MacPorts base version 1.8.1 installed,
> MacPorts base version 1.8.1 downloaded.
> ---> MacPorts base is already the latest version
>
> The ports tree has been updated. To upgrade your installed ports, you
> should run
> port upgrade outdated
> MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port install -f ncursesw >
> /dev/null && sudo port install exempi
> ---> Computing dependencies for exempi
> ---> Fetching expat
> ---> Attempting to fetch expat-2.0.1.tar.gz from
> http://mesh.dl.sourceforge.net/expat
> ---> Verifying checksum(s) for expat
> ---> Extracting expat
> ---> Configuring expat
> ---> Building expat
> ---> Staging expat into destroot
> ---> Installing expat @2.0.1_0
> ---> Activating expat @2.0.1_0
> ---> Cleaning expat
> ---> Fetching gperf
> ---> Attempting to fetch gperf-3.0.4.tar.gz from
> ftp://ftp.chg.ru/pub/gnu/gperf
> ---> Verifying checksum(s) for gperf
> ---> Extracting gperf
> ---> Configuring gperf
> ---> Building gperf
> ---> Staging gperf into destroot
> ---> Installing gperf @3.0.4_0
> ---> Activating gperf @3.0.4_0
> ---> Cleaning gperf
> ---> Fetching libiconv
> ---> Attempting to fetch libiconv-1.13.tar.gz from
> ftp://ftp.chg.ru/pub/gnu/libiconv
> ---> Verifying checksum(s) for libiconv
> ---> Extracting libiconv
> ---> Applying patches to libiconv
> ---> Configuring libiconv
> ---> Building libiconv
> ---> Staging libiconv into destroot
> ---> Installing libiconv @1.13_0
> ---> Activating libiconv @1.13_0
> ---> Cleaning libiconv
> ---> Fetching ncurses
> ---> Verifying checksum(s) for ncurses
> ---> Extracting ncurses
> ---> Configuring ncurses
> ---> Building ncurses
> ---> Staging ncurses into destroot
> ---> Installing ncurses @5.7_0+darwin_10
> ---> Activating ncurses @5.7_0+darwin_10
> ---> Cleaning ncurses
> ---> Fetching gettext
> ---> Attempting to fetch gettext-0.17.tar.gz from
> ftp://ftp.chg.ru/pub/gnu/gettext
> ---> Verifying checksum(s) for gettext
> ---> Extracting gettext
> ---> Applying patches to gettext
> ---> Configuring gettext
> ---> Building gettext
> ---> Staging gettext into destroot
> ---> Installing gettext @0.17_4
> ---> Activating gettext @0.17_4
> ---> Cleaning gettext
> ---> Fetching perl5.8
> ---> Attempting to fetch perl-5.8.9.tar.bz2 from
> http://arn.se.distfiles.macports.org/perl5.8
> ---> Attempting to fetch perl-5.8.9.tar.bz2 from
> http://www.cpan.org/src/
> ---> Verifying checksum(s) for perl5.8
> ---> Extracting perl5.8
> ---> Applying patches to perl5.8
> ---> Configuring perl5.8
> ---> Building perl5.8
> ---> Staging perl5.8 into destroot
> ---> Installing perl5.8 @5.8.9_3
> ---> Activating perl5.8 @5.8.9_3
> ---> Cleaning perl5.8
> ---> Fetching perl5
> ---> Verifying checksum(s) for perl5
> ---> Extracting perl5
> ---> Configuring perl5
> ---> Building perl5
> ---> Staging perl5 into destroot
> ---> Installing perl5 @5.8.9_0
> ---> Activating perl5 @5.8.9_0
> ---> Cleaning perl5
> ---> Fetching p5-locale-gettext
> ---> Attempting to fetch gettext-1.05.tar.gz from
> ftp://ftp.chg.ru/pub/lang/perl/CPAN/modules/by-module/Locale
> ---> Verifying checksum(s) for p5-locale-gettext
> ---> Extracting p5-locale-gettext
> ---> Applying patches to p5-locale-gettext
> ---> Configuring p5-locale-gettext
> ---> Building p5-locale-gettext
> ---> Staging p5-locale-gettext into destroot
> ---> Installing p5-locale-gettext @1.05_0
> ---> Activating p5-locale-gettext @1.05_0
> ---> Cleaning p5-locale-gettext
> ---> Fetching help2man
> ---> Attempting to fetch help2man-1.37.1.tar.gz from
> ftp://ftp.chg.ru/pub/gnu/help2man
> ---> Verifying checksum(s) for help2man
> ---> Extracting help2man
> ---> Configuring help2man
> ---> Building help2man
> ---> Staging help2man into destroot
> ---> Installing help2man @1.37.1_1
> ---> Activating help2man @1.37.1_1
> ---> Cleaning help2man
> ---> Fetching m4
> ---> Attempting to fetch m4-1.4.13.tar.bz2 from
> ftp://ftp.chg.ru/pub/gnu/m4
> ---> Verifying checksum(s) for m4
> ---> Extracting m4
> ---> Applying patches to m4
> ---> Configuring m4
> ---> Building m4
> ---> Staging m4 into destroot
> ---> Installing m4 @1.4.13_0
> ---> Activating m4 @1.4.13_0
> ---> Cleaning m4
> ---> Fetching autoconf
> ---> Attempting to fetch autoconf-2.65.tar.bz2 from
> ftp://ftp.chg.ru/pub/gnu/autoconf
> ---> Verifying checksum(s) for autoconf
> ---> Extracting autoconf
> ---> Configuring autoconf
> ---> Building autoconf
> ---> Staging autoconf into destroot
> ---> Installing autoconf @2.65_0
> ---> Activating autoconf @2.65_0
> ---> Cleaning autoconf
> ---> Fetching automake
> ---> Attempting to fetch automake-1.11.1.tar.bz2 from
> ftp://ftp.chg.ru/pub/gnu/automake
> ---> Verifying checksum(s) for automake
> ---> Extracting automake
> ---> Configuring automake
> ---> Building automake
> ---> Staging automake into destroot
> ---> Installing automake @1.11.1_0
> ---> Activating automake @1.11.1_0
> ---> Cleaning automake
> ---> Fetching libtool
> ---> Attempting to fetch libtool-2.2.6b.tar.gz from
> ftp://ftp.chg.ru/pub/gnu/libtool
> ---> Verifying checksum(s) for libtool
> ---> Extracting libtool
> ---> Configuring libtool
> ---> Building libtool
> ---> Staging libtool into destroot
> ---> Installing libtool @2.2.6b_0
> ---> Activating libtool @2.2.6b_0
> ---> Cleaning libtool
> ---> Fetching exempi
> ---> Attempting to fetch exempi-2.1.1.tar.gz from
> http://arn.se.distfiles.macports.org/exempi
> ---> Attempting to fetch exempi-2.1.1.tar.gz from
> http://libopenraw.freedesktop.org/download/
> ---> Verifying checksum(s) for exempi
> ---> Extracting exempi
> ---> Applying patches to exempi
> Error: Target org.macports.patch returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1"
> && /usr/bin/patch -p1 <
> '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files
> /patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1
> Command output: can't find file to patch at input line 3
> Perhaps you used the wrong -p or --strip option?
> The text leading up to this was:
> --------------------------
> |--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig
> 2009-03-12 00:59:21.000000000 +0000
> |+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am 2009-10-02
> 21:58:49.000000000 +0100
> --------------------------
> File to patch:
> Skip this patch? [y]
> Skipping patch.
> 1 out of 1 hunk ignored
>
> Error: Status 1 encountered during processing.
> }}}
>
> Thank you for your help.
New description:
I apologize for Reopening ticket. Despite changes in r62080 I can not
build exempi even after a complete uninstall ports.
Here's a log of action after a new installation of ports for the snow
leopard:
{{{
MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port -v selfupdate
Password:
---> Updating the ports tree
Synchronizing local ports tree from
rsync://rsync.macports.org/release/ports/
receiving file list ... done
sent 36 bytes received 424733 bytes 77230.73 bytes/sec
total size is 27687253 speedup is 65.18
---> Updating MacPorts base sources using rsync
receiving file list ... done
sent 36 bytes received 6873 bytes 1974.00 bytes/sec
total size is 4021380 speedup is 582.05
MacPorts base version 1.8.1 installed,
MacPorts base version 1.8.1 downloaded.
---> MacPorts base is already the latest version
The ports tree has been updated. To upgrade your installed ports, you
should run
port upgrade outdated
MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port install -f ncursesw >
/dev/null && sudo port install exempi
---> Computing dependencies for exempi
---> Fetching expat
---> Attempting to fetch expat-2.0.1.tar.gz from
http://mesh.dl.sourceforge.net/expat
---> Verifying checksum(s) for expat
---> Extracting expat
---> Configuring expat
---> Building expat
---> Staging expat into destroot
---> Installing expat @2.0.1_0
---> Activating expat @2.0.1_0
---> Cleaning expat
---> Fetching gperf
---> Attempting to fetch gperf-3.0.4.tar.gz from
ftp://ftp.chg.ru/pub/gnu/gperf
---> Verifying checksum(s) for gperf
---> Extracting gperf
---> Configuring gperf
---> Building gperf
---> Staging gperf into destroot
---> Installing gperf @3.0.4_0
---> Activating gperf @3.0.4_0
---> Cleaning gperf
---> Fetching libiconv
---> Attempting to fetch libiconv-1.13.tar.gz from
ftp://ftp.chg.ru/pub/gnu/libiconv
---> Verifying checksum(s) for libiconv
---> Extracting libiconv
---> Applying patches to libiconv
---> Configuring libiconv
---> Building libiconv
---> Staging libiconv into destroot
---> Installing libiconv @1.13_0
---> Activating libiconv @1.13_0
---> Cleaning libiconv
---> Fetching ncurses
---> Verifying checksum(s) for ncurses
---> Extracting ncurses
---> Configuring ncurses
---> Building ncurses
---> Staging ncurses into destroot
---> Installing ncurses @5.7_0+darwin_10
---> Activating ncurses @5.7_0+darwin_10
---> Cleaning ncurses
---> Fetching gettext
---> Attempting to fetch gettext-0.17.tar.gz from
ftp://ftp.chg.ru/pub/gnu/gettext
---> Verifying checksum(s) for gettext
---> Extracting gettext
---> Applying patches to gettext
---> Configuring gettext
---> Building gettext
---> Staging gettext into destroot
---> Installing gettext @0.17_4
---> Activating gettext @0.17_4
---> Cleaning gettext
---> Fetching perl5.8
---> Attempting to fetch perl-5.8.9.tar.bz2 from
http://arn.se.distfiles.macports.org/perl5.8
---> Attempting to fetch perl-5.8.9.tar.bz2 from http://www.cpan.org/src/
---> Verifying checksum(s) for perl5.8
---> Extracting perl5.8
---> Applying patches to perl5.8
---> Configuring perl5.8
---> Building perl5.8
---> Staging perl5.8 into destroot
---> Installing perl5.8 @5.8.9_3
---> Activating perl5.8 @5.8.9_3
---> Cleaning perl5.8
---> Fetching perl5
---> Verifying checksum(s) for perl5
---> Extracting perl5
---> Configuring perl5
---> Building perl5
---> Staging perl5 into destroot
---> Installing perl5 @5.8.9_0
---> Activating perl5 @5.8.9_0
---> Cleaning perl5
---> Fetching p5-locale-gettext
---> Attempting to fetch gettext-1.05.tar.gz from
ftp://ftp.chg.ru/pub/lang/perl/CPAN/modules/by-module/Locale
---> Verifying checksum(s) for p5-locale-gettext
---> Extracting p5-locale-gettext
---> Applying patches to p5-locale-gettext
---> Configuring p5-locale-gettext
---> Building p5-locale-gettext
---> Staging p5-locale-gettext into destroot
---> Installing p5-locale-gettext @1.05_0
---> Activating p5-locale-gettext @1.05_0
---> Cleaning p5-locale-gettext
---> Fetching help2man
---> Attempting to fetch help2man-1.37.1.tar.gz from
ftp://ftp.chg.ru/pub/gnu/help2man
---> Verifying checksum(s) for help2man
---> Extracting help2man
---> Configuring help2man
---> Building help2man
---> Staging help2man into destroot
---> Installing help2man @1.37.1_1
---> Activating help2man @1.37.1_1
---> Cleaning help2man
---> Fetching m4
---> Attempting to fetch m4-1.4.13.tar.bz2 from
ftp://ftp.chg.ru/pub/gnu/m4
---> Verifying checksum(s) for m4
---> Extracting m4
---> Applying patches to m4
---> Configuring m4
---> Building m4
---> Staging m4 into destroot
---> Installing m4 @1.4.13_0
---> Activating m4 @1.4.13_0
---> Cleaning m4
---> Fetching autoconf
---> Attempting to fetch autoconf-2.65.tar.bz2 from
ftp://ftp.chg.ru/pub/gnu/autoconf
---> Verifying checksum(s) for autoconf
---> Extracting autoconf
---> Configuring autoconf
---> Building autoconf
---> Staging autoconf into destroot
---> Installing autoconf @2.65_0
---> Activating autoconf @2.65_0
---> Cleaning autoconf
---> Fetching automake
---> Attempting to fetch automake-1.11.1.tar.bz2 from
ftp://ftp.chg.ru/pub/gnu/automake
---> Verifying checksum(s) for automake
---> Extracting automake
---> Configuring automake
---> Building automake
---> Staging automake into destroot
---> Installing automake @1.11.1_0
---> Activating automake @1.11.1_0
---> Cleaning automake
---> Fetching libtool
---> Attempting to fetch libtool-2.2.6b.tar.gz from
ftp://ftp.chg.ru/pub/gnu/libtool
---> Verifying checksum(s) for libtool
---> Extracting libtool
---> Configuring libtool
---> Building libtool
---> Staging libtool into destroot
---> Installing libtool @2.2.6b_0
---> Activating libtool @2.2.6b_0
---> Cleaning libtool
---> Fetching exempi
---> Attempting to fetch exempi-2.1.1.tar.gz from
http://arn.se.distfiles.macports.org/exempi
---> Attempting to fetch exempi-2.1.1.tar.gz from
http://libopenraw.freedesktop.org/download/
---> Verifying checksum(s) for exempi
---> Extracting exempi
---> Applying patches to exempi
Error: Target org.macports.patch returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1"
&& /usr/bin/patch -p1 <
'/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files
/patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1
Command output: can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig 2009-03-12
00:59:21.000000000 +0000
|+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am 2009-10-02
21:58:49.000000000 +0100
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
1 out of 1 hunk ignored
Error: Status 1 encountered during processing.
}}}
Thank you for your help.
--
--
Ticket URL: <http://trac.macports.org/ticket/23061#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list