[MacPorts] #18051: apr-util requires gsed but it's not in the Portfile.

[MacPorts]

#18051: apr-util requires gsed but it's not in the Portfile.
---------------------------+------------------------------------------------
 Reporter:  sck@…          |       Owner:  dluke@…           
     Type:  defect         |      Status:  new               
 Priority:  Normal         |   Milestone:  Port Bugs         
Component:  ports          |     Version:  1.7.0             
 Keywords:  apr-util gsed  |        Port:  apr-util          
---------------------------+------------------------------------------------
Changes (by jmr@…):

  * owner:  macports-tickets@… => dluke@…


Old description:

> When re-building MacPorts on my Leopard laptop 10.5.6 with MacPorts 1.7,
> I came across this issue with apr-util.
>
> Scott
> ---
> Biko-2:~ sck$ sudo port selfupdate
>
> MacPorts base version 1.700 installed
> Downloaded MacPorts base version 1.700
>
> The MacPorts installation is not outdated so it was not updated
> Biko-2:~ sck$ sudo port install apr-util
> --->  Fetching apr-util
> --->  Verifying checksum(s) for apr-util
> --->  Extracting apr-util
> --->  Configuring apr-util
> --->  Building apr-util
> Error: Target org.macports.build returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_devel_apr-util/work/apr-util-1.3.4" && make all "
> returnedCommand output: /bin/sh /opt/local/share/apr-1/build/libtool
> --silent --mode=compile /usr/bin/gcc-4.0   -O2 -DHAVE_CONFIG_H -DDARWIN
> -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp  -I/opt/local/include
> -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_devel_apr-util/work/apr-util-1.3.4/include
> -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_devel_apr-util/work/apr-util-1.3.4/include/private
> -I/opt/local/include  -I/opt/local/include/apr-1  -I/opt/local/include
> -o buckets/apr_buckets_pipe.lo -c buckets/apr_buckets_pipe.c && touch
> buckets/apr_buckets_pipe.lo
> /opt/local/share/apr-1/build/libtool: line 390: /opt/local/bin/gsed: No
> such file or directory
> /opt/local/share/apr-1/build/libtool: line 789: /opt/local/bin/gsed: No
> such file or directory
> /bin/echo: write: Broken pipe
> *** Warning: inferring the mode of operation is deprecated.
> *** Future versions of Libtool will require --mode=MODE be specified.
> : warning: cannot infer operation mode from `/usr/bin/gcc-4.0'
> : you must specify a MODE
> Try ` --help' for more information.
> make[1]: *** [buckets/apr_buckets_pipe.lo] Error 1
> make: *** [all-recursive] Error 1
>
> Error: Status 1 encountered during processing.
>

> Biko-2:~ sck$ grep gsed
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /apr-util/Portfile
> Biko-2:~ sck$ sudo port  install gsed
> --->  Fetching gsed
> --->  Verifying checksum(s) for gsed
> --->  Extracting gsed
> --->  Applying patches to gsed
> --->  Configuring gsed
> --->  Building gsed
> --->  Staging gsed into destroot
> --->  Installing gsed @4.1.5_3
> --->  Activating gsed @4.1.5_3
> --->  Cleaning gsed
> Biko-2:~ sck$ sudo port install apr-util
> --->  Fetching apr-util
> --->  Verifying checksum(s) for apr-util
> --->  Extracting apr-util
> --->  Configuring apr-util
> --->  Building apr-util
> --->  Staging apr-util into destroot
> --->  Installing apr-util @1.3.4_1
> --->  Activating apr-util @1.3.4_1
> --->  Cleaning apr-util
> Biko-2:~ sck$

New description:

 When re-building MacPorts on my Leopard laptop 10.5.6 with MacPorts 1.7, I
 came across this issue with apr-util.

 Scott
 {{{
 Biko-2:~ sck$ sudo port selfupdate

 MacPorts base version 1.700 installed
 Downloaded MacPorts base version 1.700

 The MacPorts installation is not outdated so it was not updated
 Biko-2:~ sck$ sudo port install apr-util
 --->  Fetching apr-util
 --->  Verifying checksum(s) for apr-util
 --->  Extracting apr-util
 --->  Configuring apr-util
 --->  Building apr-util
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_devel_apr-util/work/apr-util-1.3.4" && make all "
 returnedCommand output: /bin/sh /opt/local/share/apr-1/build/libtool
 --silent --mode=compile /usr/bin/gcc-4.0   -O2 -DHAVE_CONFIG_H -DDARWIN
 -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp  -I/opt/local/include
 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_devel_apr-util/work/apr-util-1.3.4/include
 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_devel_apr-util/work/apr-util-1.3.4/include/private
 -I/opt/local/include  -I/opt/local/include/apr-1  -I/opt/local/include  -o
 buckets/apr_buckets_pipe.lo -c buckets/apr_buckets_pipe.c && touch
 buckets/apr_buckets_pipe.lo
 /opt/local/share/apr-1/build/libtool: line 390: /opt/local/bin/gsed: No
 such file or directory
 /opt/local/share/apr-1/build/libtool: line 789: /opt/local/bin/gsed: No
 such file or directory
 /bin/echo: write: Broken pipe
 *** Warning: inferring the mode of operation is deprecated.
 *** Future versions of Libtool will require --mode=MODE be specified.
 : warning: cannot infer operation mode from `/usr/bin/gcc-4.0'
 : you must specify a MODE
 Try ` --help' for more information.
 make[1]: *** [buckets/apr_buckets_pipe.lo] Error 1
 make: *** [all-recursive] Error 1

 Error: Status 1 encountered during processing.


 Biko-2:~ sck$ grep gsed
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /apr-util/Portfile
 Biko-2:~ sck$ sudo port  install gsed
 --->  Fetching gsed
 --->  Verifying checksum(s) for gsed
 --->  Extracting gsed
 --->  Applying patches to gsed
 --->  Configuring gsed
 --->  Building gsed
 --->  Staging gsed into destroot
 --->  Installing gsed @4.1.5_3
 --->  Activating gsed @4.1.5_3
 --->  Cleaning gsed
 Biko-2:~ sck$ sudo port install apr-util
 --->  Fetching apr-util
 --->  Verifying checksum(s) for apr-util
 --->  Extracting apr-util
 --->  Configuring apr-util
 --->  Building apr-util
 --->  Staging apr-util into destroot
 --->  Installing apr-util @1.3.4_1
 --->  Activating apr-util @1.3.4_1
 --->  Cleaning apr-util
 Biko-2:~ sck$
 }}}

--

-- 
Ticket URL: <http://trac.macports.org/ticket/18051#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS