[MacPorts] #17884: gimp2 2.6.4 configure can't find XML::Parser

MacPorts noreply at macports.org
Wed Jan 7 00:20:14 PST 2009


#17884: gimp2 2.6.4 configure can't find XML::Parser
-------------------------------------+--------------------------------------
 Reporter:  calle.kabo@…             |       Owner:  ricci@…           
     Type:  defect                   |      Status:  new               
 Priority:  Normal                   |   Milestone:  Port Bugs         
Component:  ports                    |     Version:  1.7.0             
 Keywords:  gimp2 2.6.4 XML::Parser  |        Port:  perl5.8           
-------------------------------------+--------------------------------------
Changes (by devans@…):

 * cc: devans@… (added)
  * owner:  devans@… => ricci@…
  * status:  assigned => new
  * port:  gimp2 => perl5.8


Old description:

> I got an error when upgrading to gimp2 2.6.4.
> {{{
> checking for XML::Parser... configure: error: XML::Parser perl module is
> required for intltool
> }}}
> So I did:
> {{{
> $ sudo cpan
> cpan> install XML::Parser
> }}}
> Which installed nicely. But I still get the same error from macports!
> {{{
> $ sudo port -d upgrade gimp2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gimp2 2.6.4_0 exists in the ports tree
> DEBUG: gimp2 2.6.3_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gegl 0.0.22_1 exists in the ports tree
> DEBUG: gegl 0.0.22_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pkgconfig 0.23_1 exists in the ports tree
> DEBUG: pkgconfig 0.23_1 is installed
> DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/w3m
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: w3m 0.5.2_1 exists in the ports tree
> DEBUG: w3m 0.5.2_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boehmgc
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: boehmgc 7.1_0 exists in the ports tree
> DEBUG: boehmgc 7.1_0 is installed
> DEBUG: No need to upgrade! boehmgc 7.1_0 >= boehmgc 7.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: zlib 1.2.3_2 exists in the ports tree
> DEBUG: zlib 1.2.3_2 is installed
> DEBUG: No need to upgrade! zlib 1.2.3_2 >= zlib 1.2.3_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: openssl 0.9.8i_0 exists in the ports tree
> DEBUG: openssl 0.9.8i_0 is installed
> DEBUG: No need to upgrade! openssl 0.9.8i_0 >= openssl 0.9.8i_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0 is installed
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_3 exists in the ports tree
> DEBUG: gettext 0.17_3 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.12_0 exists in the ports tree
> DEBUG: libiconv 1.12_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.3_0 exists in the ports tree
> DEBUG: gperf 3.0.3_0 is installed
> DEBUG: No need to upgrade! gperf 3.0.3_0 >= gperf 3.0.3_0
> DEBUG: No need to upgrade! libiconv 1.12_0 >= libiconv 1.12_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0 is installed
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_3 >= gettext 0.17_3
> DEBUG: No need to upgrade! w3m 0.5.2_1 >= w3m 0.5.2_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/babl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: babl 0.0.22_0 exists in the ports tree
> DEBUG: babl 0.0.22_0 is installed
> DEBUG: No need to upgrade! babl 0.0.22_0 >= babl 0.0.22_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gtk2 2.14.5_0 exists in the ports tree
> DEBUG: gtk2 2.14.5_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gtk-doc
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gtk-doc 1.11_0 exists in the ports tree
> DEBUG: gtk-doc 1.11_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: rarian 0.8.1_0 exists in the ports tree
> DEBUG: rarian 0.8.1_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: intltool 0.40.5_0 exists in the ports tree
> DEBUG: intltool 0.40.5_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gnome-common
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gnome-common 2.24.0_1 exists in the ports tree
> DEBUG: gnome-common 2.24.0_1 is installed
> DEBUG: No need to upgrade! gnome-common 2.24.0_1 >= gnome-common 2.24.0_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: perl5 is *not* installed by MacPorts
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port perl5.
> DEBUG: Requested variant i386 is not provided by port perl5.
> DEBUG: Requested variant macosx is not provided by port perl5.
> DEBUG: Searching for dependency: perl5
> DEBUG: Didn't find receipt, going to depspec regex for: perl5
> DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex:
> ^perl$
> DEBUG: perl5 installed outside the MacPorts system
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5 5.8.9_0 exists in the ports tree
> DEBUG: perl5 5.8.9_0 is installed
> DEBUG: Not following dependencies
> DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -xml-parser
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-xml-parser 2.36_0 exists in the ports tree
> DEBUG: p5-xml-parser 2.36_0 is installed
> DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0
> DEBUG: No need to upgrade! intltool 0.40.5_0 >= intltool 0.40.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: getopt 1.1.4_1 exists in the ports tree
> DEBUG: getopt 1.1.4_1 is installed
> DEBUG: No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libxslt 1.1.24_1 exists in the ports tree
> DEBUG: libxslt 1.1.24_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libxml2 2.7.2_1 exists in the ports tree
> DEBUG: libxml2 2.7.2_1 is installed
> DEBUG: No need to upgrade! libxml2 2.7.2_1 >= libxml2 2.7.2_1
> DEBUG: No need to upgrade! libxslt 1.1.24_1 >= libxslt 1.1.24_1
> DEBUG: No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gnome-doc-utils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gnome-doc-utils 0.14.1_0 exists in the ports tree
> DEBUG: gnome-doc-utils 0.14.1_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-hashlib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-hashlib 2.5.4_0 exists in the ports tree
> DEBUG: py25-hashlib 2.5.4_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: python25 2.5.4_0 exists in the ports tree
> DEBUG: python25 2.5.4_0 is installed
> DEBUG: No need to upgrade! python25 2.5.4_0 >= python25 2.5.4_0
> DEBUG: No need to upgrade! py25-hashlib 2.5.4_0 >= py25-hashlib 2.5.4_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-libxml2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-libxml2 2.6.21_1 exists in the ports tree
> DEBUG: py25-libxml2 2.6.21_1 is installed
> DEBUG: No need to upgrade! py25-libxml2 2.6.21_1 >= py25-libxml2 2.6.21_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /docbook-xml
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: docbook-xml 5.0_0 exists in the ports tree
> DEBUG: docbook-xml 5.0_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /docbook-xml-4.1.2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
> DEBUG: docbook-xml-4.1.2 4.1.2_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xmlcatmgr 2.2_1 exists in the ports tree
> DEBUG: xmlcatmgr 2.2_1 is installed
> DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
> DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2
> 4.1.2_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /docbook-xml-4.2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree
> DEBUG: docbook-xml-4.2 4.2_0 is installed
> DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /docbook-xml-4.3
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree
> DEBUG: docbook-xml-4.3 4.3_0 is installed
> DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /docbook-xml-4.4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree
> DEBUG: docbook-xml-4.4 4.4_0 is installed
> DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /docbook-xml-4.5
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree
> DEBUG: docbook-xml-4.5 4.5_0 is installed
> DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /docbook-xml-5.0
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree
> DEBUG: docbook-xml-5.0 5.0_0 is installed
> DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0
> DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
> /docbook-xsl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: docbook-xsl 1.74.0_0 exists in the ports tree
> DEBUG: docbook-xsl 1.74.0_0 is installed
> DEBUG: No need to upgrade! docbook-xsl 1.74.0_0 >= docbook-xsl 1.74.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /iso-codes
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: iso-codes 3.5_0 exists in the ports tree
> DEBUG: iso-codes 3.5_0 is installed
> DEBUG: No need to upgrade! iso-codes 3.5_0 >= iso-codes 3.5_0
> DEBUG: No need to upgrade! gnome-doc-utils 0.14.1_0 >= gnome-doc-utils
> 0.14.1_0
> DEBUG: No need to upgrade! gtk-doc 1.11_0 >= gtk-doc 1.11_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: cairo 1.8.6_1 exists in the ports tree
> DEBUG: cairo 1.8.6_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libpixman 0.12.0_1 exists in the ports tree
> DEBUG: libpixman 0.12.0_1 is installed
> DEBUG: No need to upgrade! libpixman 0.12.0_1 >= libpixman 0.12.0_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xrender 0.9.4_4 exists in the ports tree
> DEBUG: xrender 0.9.4_4 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xproto 7.0.14_1 exists in the ports tree
> DEBUG: xorg-xproto 7.0.14_1 is installed
> DEBUG: No need to upgrade! xorg-xproto 7.0.14_1 >= xorg-xproto 7.0.14_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-renderproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-renderproto 0.9.3_0 exists in the ports tree
> DEBUG: xorg-renderproto 0.9.3_0 is installed
> DEBUG: No need to upgrade! xorg-renderproto 0.9.3_0 >= xorg-renderproto
> 0.9.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> DEBUG: xorg-libX11 is *not* installed by MacPorts
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-libX11.
> DEBUG: Requested variant i386 is not provided by port xorg-libX11.
> DEBUG: Requested variant macosx is not provided by port xorg-libX11.
> DEBUG: Searching for dependency: xorg-libX11
> DEBUG: Didn't find receipt, going to depspec regex for: xorg-libX11
> DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.dylib
> regex: ^libX11\.dylib$
> DEBUG: xorg-libX11 installed outside the MacPorts system
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libX11 1.1.5_1 exists in the ports tree
> DEBUG: xorg-libX11 1.1.5_1 is installed
> DEBUG: Not following dependencies
> DEBUG: No need to upgrade! xorg-libX11 1.1.5_1 >= xorg-libX11 1.1.5_1
> DEBUG: No need to upgrade! xrender 0.9.4_4 >= xrender 0.9.4_4
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: fontconfig 2.6.0_1 exists in the ports tree
> DEBUG: fontconfig 2.6.0_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: freetype 2.3.7_3 exists in the ports tree
> DEBUG: freetype 2.3.7_3 is installed
> DEBUG: No need to upgrade! freetype 2.3.7_3 >= freetype 2.3.7_3
> DEBUG: No need to upgrade! fontconfig 2.6.0_1 >= fontconfig 2.6.0_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libpng 1.2.34_0 exists in the ports tree
> DEBUG: libpng 1.2.34_0 is installed
> DEBUG: No need to upgrade! libpng 1.2.34_0 >= libpng 1.2.34_0
> DEBUG: No need to upgrade! cairo 1.8.6_1 >= cairo 1.8.6_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: glib2 2.18.3_0 exists in the ports tree
> DEBUG: glib2 2.18.3_0 is installed
> DEBUG: No need to upgrade! glib2 2.18.3_0 >= glib2 2.18.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: jpeg 6b_3 exists in the ports tree
> DEBUG: jpeg 6b_3 is installed
> DEBUG: No need to upgrade! jpeg 6b_3 >= jpeg 6b_3
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: tiff 3.8.2_2 exists in the ports tree
> DEBUG: tiff 3.8.2_2 is installed
> DEBUG: No need to upgrade! tiff 3.8.2_2 >= tiff 3.8.2_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: jasper 1.900.1_2 exists in the ports tree
> DEBUG: jasper 1.900.1_2 is installed
> DEBUG: No need to upgrade! jasper 1.900.1_2 >= jasper 1.900.1_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: atk 1.24.0_0 exists in the ports tree
> DEBUG: atk 1.24.0_0 is installed
> DEBUG: No need to upgrade! atk 1.24.0_0 >= atk 1.24.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pango 1.22.4_0 exists in the ports tree
> DEBUG: pango 1.22.4_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: Xft2 2.1.13_0 exists in the ports tree
> DEBUG: Xft2 2.1.13_0 is installed
> DEBUG: No need to upgrade! Xft2 2.1.13_0 >= Xft2 2.1.13_0
> DEBUG: No need to upgrade! pango 1.22.4_0 >= pango 1.22.4_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXi
> DEBUG: xorg-libXi is *not* installed by MacPorts
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXi
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-libXi.
> DEBUG: Requested variant i386 is not provided by port xorg-libXi.
> DEBUG: Requested variant macosx is not provided by port xorg-libXi.
> DEBUG: Searching for dependency: xorg-libXi
> DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXi
> DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXi.6.dylib
> regex: ^libXi\.6\.dylib$
> DEBUG: xorg-libXi installed outside the MacPorts system
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXi 1.2.0_0 exists in the ports tree
> DEBUG: xorg-libXi 1.2.0_0 is installed
> DEBUG: Not following dependencies
> DEBUG: No need to upgrade! xorg-libXi 1.2.0_0 >= xorg-libXi 1.2.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXrandr
> DEBUG: xorg-libXrandr is *not* installed by MacPorts
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXrandr
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
> DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
> DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
> DEBUG: Searching for dependency: xorg-libXrandr
> DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXrandr
>

>

>

>
> DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXrandr.2.dylib
> regex: ^libXrandr\.2\.dylib$
> DEBUG: xorg-libXrandr installed outside the MacPorts system
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXrandr 1.2.3_0 exists in the ports tree
> DEBUG: xorg-libXrandr 1.2.3_0 is installed
> DEBUG: Not following dependencies
> DEBUG: No need to upgrade! xorg-libXrandr 1.2.3_0 >= xorg-libXrandr
> 1.2.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXcursor
> DEBUG: xorg-libXcursor is *not* installed by MacPorts
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXcursor
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-libXcursor.
> DEBUG: Requested variant i386 is not provided by port xorg-libXcursor.
> DEBUG: Requested variant macosx is not provided by port xorg-libXcursor.
> DEBUG: Searching for dependency: xorg-libXcursor
> DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXcursor
> DEBUG: Found Dependency: path: /usr/X11R6/lib filename:
> libXcursor.1.dylib regex: ^libXcursor\.1\.dylib$
> DEBUG: xorg-libXcursor installed outside the MacPorts system
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXcursor 1.1.9_0 exists in the ports tree
> DEBUG: xorg-libXcursor 1.1.9_0 is installed
> DEBUG: Not following dependencies
> DEBUG: No need to upgrade! xorg-libXcursor 1.1.9_0 >= xorg-libXcursor
> 1.1.9_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXinerama
> DEBUG: xorg-libXinerama is *not* installed by MacPorts
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXinerama
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-libXinerama.
> DEBUG: Requested variant i386 is not provided by port xorg-libXinerama.
> DEBUG: Requested variant macosx is not provided by port xorg-libXinerama.
> DEBUG: Searching for dependency: xorg-libXinerama
> DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXinerama
> DEBUG: Found Dependency: path: /usr/X11R6/lib filename:
> libXinerama.1.dylib regex: ^libXinerama\.1\.dylib$
> DEBUG: xorg-libXinerama installed outside the MacPorts system
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXinerama 1.0.3_0 exists in the ports tree
> DEBUG: xorg-libXinerama 1.0.3_0 is installed
> DEBUG: Not following dependencies
> DEBUG: No need to upgrade! xorg-libXinerama 1.0.3_0 >= xorg-libXinerama
> 1.0.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /shared-mime-info
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: shared-mime-info 0.51_0 exists in the ports tree
> DEBUG: shared-mime-info 0.51_0 is installed
> DEBUG: No need to upgrade! shared-mime-info 0.51_0 >= shared-mime-info
> 0.51_0
> DEBUG: No need to upgrade! gtk2 2.14.5_0 >= gtk2 2.14.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/lua
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: lua 5.1.4_0 exists in the ports tree
> DEBUG: lua 5.1.4_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: readline 5.2.012_1 exists in the ports tree
> DEBUG: readline 5.2.012_1 is installed
> DEBUG: No need to upgrade! readline 5.2.012_1 >= readline 5.2.012_1
>
> DEBUG: No need to upgrade! lua 5.1.4_0 >= lua 5.1.4_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: openexr 1.6.1_1 exists in the ports tree
> DEBUG: openexr 1.6.1_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libtool 2.2.6a_0 exists in the ports tree
> DEBUG: libtool 2.2.6a_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: automake 1.10.2_0 exists in the ports tree
> DEBUG: automake 1.10.2_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: autoconf 2.63_0 exists in the ports tree
> DEBUG: autoconf 2.63_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: m4 1.4.12_1 exists in the ports tree
> DEBUG: m4 1.4.12_1 is installed
> DEBUG: No need to upgrade! m4 1.4.12_1 >= m4 1.4.12_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: help2man 1.36.4_1 exists in the ports tree
> DEBUG: help2man 1.36.4_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
> DEBUG: p5-locale-gettext 1.05_0 is installed
> DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
> 1.05_0
> DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
> DEBUG: No need to upgrade! autoconf 2.63_0 >= autoconf 2.63_0
> DEBUG: No need to upgrade! automake 1.10.2_0 >= automake 1.10.2_0
> DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ilmbase 1.0.1_2 exists in the ports tree
> DEBUG: ilmbase 1.0.1_2 is installed
> DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
> DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libopenraw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libopenraw 0.0.5_0 exists in the ports tree
> DEBUG: libopenraw 0.0.5_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: boost 1.37.0_0 exists in the ports tree
> DEBUG: boost 1.37.0_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /boost-jam
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: boost-jam 3.1.16_0 exists in the ports tree
> DEBUG: boost-jam 3.1.16_0 is installed
> DEBUG: No need to upgrade! boost-jam 3.1.16_0 >= boost-jam 3.1.16_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gmake 3.81_0 exists in the ports tree
> DEBUG: gmake 3.81_0 is installed
> DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: bzip2 1.0.5_1 exists in the ports tree
> DEBUG: bzip2 1.0.5_1 is installed
> DEBUG: No need to upgrade! bzip2 1.0.5_1 >= bzip2 1.0.5_1
> DEBUG: No need to upgrade! boost 1.37.0_0 >= boost 1.37.0_0
> DEBUG: No need to upgrade! libopenraw 0.0.5_0 >= libopenraw 0.0.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: librsvg 2.22.3_0 exists in the ports tree
> DEBUG: librsvg 2.22.3_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libcroco
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libcroco 0.6.1_1 exists in the ports tree
> DEBUG: libcroco 0.6.1_1 is installed
> DEBUG: No need to upgrade! libcroco 0.6.1_1 >= libcroco 0.6.1_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgsf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libgsf 1.14.10_1 exists in the ports tree
> DEBUG: libgsf 1.14.10_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gnome-vfs
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gnome-vfs 2.24.0_0 exists in the ports tree
> DEBUG: gnome-vfs 2.24.0_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gconf 2.24.0_0 exists in the ports tree
> DEBUG: gconf 2.24.0_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: dbus 1.2.10_0 exists in the ports tree
> DEBUG: dbus 1.2.10_0 is installed
> DEBUG: No need to upgrade! dbus 1.2.10_0 >= dbus 1.2.10_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /dbus-glib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: dbus-glib 0.78_0 exists in the ports tree
> DEBUG: dbus-glib 0.78_0 is installed
> DEBUG: No need to upgrade! dbus-glib 0.78_0 >= dbus-glib 0.78_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: orbit2 2.14.16_0 exists in the ports tree
> DEBUG: orbit2 2.14.16_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libidl 0.8.12_0 exists in the ports tree
> DEBUG: libidl 0.8.12_0 is installed
> DEBUG: No need to upgrade! libidl 0.8.12_0 >= libidl 0.8.12_0
> DEBUG: No need to upgrade! orbit2 2.14.16_0 >= orbit2 2.14.16_0
> DEBUG: No need to upgrade! gconf 2.24.0_0 >= gconf 2.24.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /desktop-file-utils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: desktop-file-utils 0.15_1 exists in the ports tree
> DEBUG: desktop-file-utils 0.15_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: popt 1.14_0 exists in the ports tree
> DEBUG: popt 1.14_0 is installed
> DEBUG: No need to upgrade! popt 1.14_0 >= popt 1.14_0
> DEBUG: No need to upgrade! desktop-file-utils 0.15_1 >= desktop-file-
> utils 0.15_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gnome-mime-data
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gnome-mime-data 2.18.0_3 exists in the ports tree
> DEBUG: gnome-mime-data 2.18.0_3 is installed
> DEBUG: No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-data
> 2.18.0_3
> DEBUG: No need to upgrade! gnome-vfs 2.24.0_0 >= gnome-vfs 2.24.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonobo
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libbonobo 2.24.0_0 exists in the ports tree
> DEBUG: libbonobo 2.24.0_0 is installed
> DEBUG: No need to upgrade! libbonobo 2.24.0_0 >= libbonobo 2.24.0_0
> DEBUG: No need to upgrade! libgsf 1.14.10_1 >= libgsf 1.14.10_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
> DEBUG: libart_lgpl 2.3.20_0 is installed
> DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
> DEBUG: No need to upgrade! librsvg 2.22.3_0 >= librsvg 2.22.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libsdl 1.2.13_2 exists in the ports tree
> DEBUG: libsdl 1.2.13_2 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/XFree86
> DEBUG: XFree86 is *not* installed by MacPorts
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/XFree86
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant i386 is not provided by port XFree86.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Searching for dependency: XFree86
> DEBUG: Didn't find receipt, going to depspec regex for: XFree86
> DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.6.dylib
> regex: ^libX11\.6\.dylib$
> DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.6.dylib
> regex: ^libX11\.6\.dylib$
> DEBUG: XFree86 installed outside the MacPorts system
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: XFree86 4.7.0_0 exists in the ports tree
> DEBUG: XFree86 4.7.0_0 is installed
> DEBUG: Not following dependencies
> DEBUG: No need to upgrade! XFree86 4.7.0_0 >= XFree86 4.7.0_0
> DEBUG: No need to upgrade! libsdl 1.2.13_2 >= libsdl 1.2.13_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: graphviz 2.20.3_0 exists in the ports tree
> DEBUG: graphviz 2.20.3_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /urw-fonts
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: urw-fonts 1.0.7pre44_0 exists in the ports tree
> DEBUG: urw-fonts 1.0.7pre44_0 is installed
> DEBUG: No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts
> 1.0.7pre44_0
> DEBUG: No need to upgrade! graphviz 2.20.3_0 >= graphviz 2.20.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ffmpeg 15261_1 exists in the ports tree
> DEBUG: ffmpeg 15261_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/subversion
> DEBUG: subversion is *not* installed by MacPorts
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/subversion
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port subversion.
> DEBUG: Requested variant i386 is not provided by port subversion.
> DEBUG: Requested variant macosx is not provided by port subversion.
> DEBUG: Searching for dependency: subversion
> DEBUG: Didn't find receipt, going to depspec regex for: subversion
> DEBUG: Found Dependency: path: /usr/bin filename: svn regex: ^svn$
> DEBUG: subversion installed outside the MacPorts system
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: subversion 1.5.5_0 exists in the ports tree
> DEBUG: subversion 1.5.5_0 is installed
> DEBUG: Not following dependencies
> DEBUG: No need to upgrade! subversion 1.5.5_0 >= subversion 1.5.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/a52dec
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: a52dec 0.7.4_0 exists in the ports tree
> DEBUG: a52dec 0.7.4_0 is installed
> DEBUG: No need to upgrade! a52dec 0.7.4_0 >= a52dec 0.7.4_0
> DEBUG: No need to upgrade! ffmpeg 15261_1 >= ffmpeg 15261_1
>
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libspiro
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libspiro 20071029_0 exists in the ports tree
> DEBUG: libspiro 20071029_0 is installed
> DEBUG: No need to upgrade! libspiro 20071029_0 >= libspiro 20071029_0
> DEBUG: No need to upgrade! gegl 0.0.22_1 >= gegl 0.0.22_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: aalib 1.4rc5_3 exists in the ports tree
> DEBUG: aalib 1.4rc5_3 is installed
> DEBUG: No need to upgrade! aalib 1.4rc5_3 >= aalib 1.4rc5_3
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: curl 7.19.2_0 exists in the ports tree
> DEBUG: curl 7.19.2_0 is installed
> DEBUG: No need to upgrade! curl 7.19.2_0 >= curl 7.19.2_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libexif 0.6.17_0 exists in the ports tree
> DEBUG: libexif 0.6.17_0 is installed
> DEBUG: No need to upgrade! libexif 0.6.17_0 >= libexif 0.6.17_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libgnomeui 2.24.0_0 exists in the ports tree
> DEBUG: libgnomeui 2.24.0_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonoboui
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libbonoboui 2.24.0_0 exists in the ports tree
> DEBUG: libbonoboui 2.24.0_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libglade2 2.6.3_0 exists in the ports tree
> DEBUG: libglade2 2.6.3_0 is installed
> DEBUG: No need to upgrade! libglade2 2.6.3_0 >= libglade2 2.6.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomecanvas
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libgnomecanvas 2.20.1.1_1 exists in the ports tree
> DEBUG: libgnomecanvas 2.20.1.1_1 is installed
> DEBUG: No need to upgrade! libgnomecanvas 2.20.1.1_1 >= libgnomecanvas
> 2.20.1.1_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnome
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libgnome 2.24.1_1 exists in the ports tree
> DEBUG: libgnome 2.24.1_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: esound 0.2.41_1 exists in the ports tree
> DEBUG: esound 0.2.41_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: audiofile 0.2.6_2 exists in the ports tree
> DEBUG: audiofile 0.2.6_2 is installed
> DEBUG: No need to upgrade! audiofile 0.2.6_2 >= audiofile 0.2.6_2
> DEBUG: No need to upgrade! esound 0.2.41_1 >= esound 0.2.41_1
> DEBUG: No need to upgrade! libgnome 2.24.1_1 >= libgnome 2.24.1_1
> DEBUG: No need to upgrade! libbonoboui 2.24.0_0 >= libbonoboui 2.24.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gnome-icon-theme
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gnome-icon-theme 2.24.0_0 exists in the ports tree
> DEBUG: gnome-icon-theme 2.24.0_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /hicolor-icon-theme
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: hicolor-icon-theme 0.10_0 exists in the ports tree
> DEBUG: hicolor-icon-theme 0.10_0 is installed
> DEBUG: No need to upgrade! hicolor-icon-theme 0.10_0 >= hicolor-icon-
> theme 0.10_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /icon-naming-utils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: icon-naming-utils 0.8.7_0 exists in the ports tree
> DEBUG: icon-naming-utils 0.8.7_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -xml-simple
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-xml-simple 2.18_0 exists in the ports tree
> DEBUG: p5-xml-simple 2.18_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -xml-namespacesupport
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-xml-namespacesupport 1.09_0 exists in the ports tree
> DEBUG: p5-xml-namespacesupport 1.09_0 is installed
> DEBUG: No need to upgrade! p5-xml-namespacesupport 1.09_0 >= p5-xml-
> namespacesupport 1.09_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -xml-sax
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-xml-sax 0.96_1 exists in the ports tree
> DEBUG: p5-xml-sax 0.96_1 is installed
> DEBUG: No need to upgrade! p5-xml-sax 0.96_1 >= p5-xml-sax 0.96_1
> DEBUG: No need to upgrade! p5-xml-simple 2.18_0 >= p5-xml-simple 2.18_0
> DEBUG: No need to upgrade! icon-naming-utils 0.8.7_0 >= icon-naming-utils
> 0.8.7_0
> DEBUG: No need to upgrade! gnome-icon-theme 2.24.0_0 >= gnome-icon-theme
> 2.24.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
> /gnome-keyring
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gnome-keyring 2.24.1_0 exists in the ports tree
> DEBUG: gnome-keyring 2.24.1_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libgcrypt 1.4.3_0 exists in the ports tree
> DEBUG: libgcrypt 1.4.3_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /libgpg-error
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libgpg-error 1.7_0 exists in the ports tree
> DEBUG: libgpg-error 1.7_0 is installed
> DEBUG: No need to upgrade! libgpg-error 1.7_0 >= libgpg-error 1.7_0
> DEBUG: No need to upgrade! libgcrypt 1.4.3_0 >= libgcrypt 1.4.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libtasn1 1.7_0 exists in the ports tree
> DEBUG: libtasn1 1.7_0 is installed
> DEBUG: No need to upgrade! libtasn1 1.7_0 >= libtasn1 1.7_0
> DEBUG: No need to upgrade! gnome-keyring 2.24.1_0 >= gnome-keyring
> 2.24.1_0
> DEBUG: No need to upgrade! libgnomeui 2.24.0_0 >= libgnomeui 2.24.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libmng 1.0.10_0 exists in the ports tree
> DEBUG: libmng 1.0.10_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: lcms 1.17_0 exists in the ports tree
> DEBUG: lcms 1.17_0 is installed
> DEBUG: No need to upgrade! lcms 1.17_0 >= lcms 1.17_0
> DEBUG: No need to upgrade! libmng 1.0.10_0 >= libmng 1.0.10_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libwmf 0.2.8.4_0 exists in the ports tree
> DEBUG: libwmf 0.2.8.4_0 is installed
> DEBUG: No need to upgrade! libwmf 0.2.8.4_0 >= libwmf 0.2.8.4_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: poppler 0.10.2_1 exists in the ports tree
> DEBUG: poppler 0.10.2_1 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openjpeg
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: openjpeg 1.3_2 exists in the ports tree
> DEBUG: openjpeg 1.3_2 is installed
> DEBUG: No need to upgrade! openjpeg 1.3_2 >= openjpeg 1.3_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
> /poppler-data
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: poppler-data 0.2.1_0 exists in the ports tree
> DEBUG: poppler-data 0.2.1_0 is installed
> DEBUG: No need to upgrade! poppler-data 0.2.1_0 >= poppler-data 0.2.1_0
> DEBUG: No need to upgrade! poppler 0.10.2_1 >= poppler 0.10.2_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-gtk 2.12.1_0 exists in the ports tree
> DEBUG: py25-gtk 2.12.1_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-cairo
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-cairo 1.8.0_0 exists in the ports tree
> DEBUG: py25-cairo 1.8.0_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-numpy 1.2.1_0 exists in the ports tree
> DEBUG: py25-numpy 1.2.1_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: fftw-3 3.2_1 exists in the ports tree
> DEBUG: fftw-3 3.2_1 is installed
> DEBUG: No need to upgrade! fftw-3 3.2_1 >= fftw-3 3.2_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-nose
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-nose 0.10.4_0 exists in the ports tree
> DEBUG: py25-nose 0.10.4_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-setuptools
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-setuptools 0.6c9_0 exists in the ports tree
> DEBUG: py25-setuptools 0.6c9_0 is installed
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-zlib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-zlib 2.5.4_0 exists in the ports tree
> DEBUG: py25-zlib 2.5.4_0 is installed
> DEBUG: No need to upgrade! py25-zlib 2.5.4_0 >= py25-zlib 2.5.4_0
> DEBUG: No need to upgrade! py25-setuptools 0.6c9_0 >= py25-setuptools
> 0.6c9_0
> DEBUG: No need to upgrade! py25-nose 0.10.4_0 >= py25-nose 0.10.4_0
> DEBUG: No need to upgrade! py25-numpy 1.2.1_0 >= py25-numpy 1.2.1_0
> DEBUG: No need to upgrade! py25-cairo 1.8.0_0 >= py25-cairo 1.8.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gobject
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: py25-gobject 2.14.2_0 exists in the ports tree
> DEBUG: py25-gobject 2.14.2_0 is installed
> DEBUG: No need to upgrade! py25-gobject 2.14.2_0 >= py25-gobject 2.14.2_0
> DEBUG: No need to upgrade! py25-gtk 2.12.1_0 >= py25-gtk 2.12.1_0
> DEBUG: variants to install {} darwin_9 x11
> DEBUG: available variants are : darwin_7 darwin_9 no_python dbus gvfs
> help_browser quartz x11 no_x11 universal
> DEBUG: variant darwin_9 is present in gimp2 2.6.4_0
> DEBUG: variant x11 is present in gimp2 2.6.4_0
> DEBUG: new portvariants: darwin_9 + x11 +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port gimp2.
> DEBUG: Requested variant i386 is not provided by port gimp2.
> DEBUG: Requested variant macosx is not provided by port gimp2.
> DEBUG: Executing variant darwin_9 provides darwin_9
> DEBUG: Executing variant x11 provides x11
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port gegl.
> DEBUG: Requested variant darwin_9 is not provided by port gegl.
> DEBUG: Requested variant i386 is not provided by port gegl.
> DEBUG: Requested variant x11 is not provided by port gegl.
> DEBUG: Requested variant macosx is not provided by port gegl.
> DEBUG: Searching for dependency: gegl
> DEBUG: Found Dependency: receipt exists for gegl
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port aalib.
> DEBUG: Requested variant darwin_9 is not provided by port aalib.
> DEBUG: Requested variant i386 is not provided by port aalib.
> DEBUG: Requested variant macosx is not provided by port aalib.
> DEBUG: Executing variant x11 provides x11
> DEBUG: Searching for dependency: aalib
> DEBUG: Found Dependency: receipt exists for aalib
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port curl.
> DEBUG: Requested variant darwin_9 is not provided by port curl.
> DEBUG: Requested variant i386 is not provided by port curl.
> DEBUG: Requested variant x11 is not provided by port curl.
> DEBUG: Requested variant macosx is not provided by port curl.
> DEBUG: Searching for dependency: curl
> DEBUG: Found Dependency: receipt exists for curl
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port libart_lgpl.
> DEBUG: Requested variant darwin_9 is not provided by port libart_lgpl.
> DEBUG: Requested variant i386 is not provided by port libart_lgpl.
> DEBUG: Requested variant x11 is not provided by port libart_lgpl.
> DEBUG: Requested variant macosx is not provided by port libart_lgpl.
> DEBUG: Searching for dependency: libart_lgpl
> DEBUG: Found Dependency: receipt exists for libart_lgpl
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port libexif.
> DEBUG: Requested variant darwin_9 is not provided by port libexif.
> DEBUG: Requested variant i386 is not provided by port libexif.
> DEBUG: Requested variant x11 is not provided by port libexif.
> DEBUG: Requested variant macosx is not provided by port libexif.
> DEBUG: Searching for dependency: libexif
> DEBUG: Found Dependency: receipt exists for libexif
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port libgnomeui.
> DEBUG: Requested variant darwin_9 is not provided by port libgnomeui.
> DEBUG: Requested variant i386 is not provided by port libgnomeui.
> DEBUG: Requested variant x11 is not provided by port libgnomeui.
> DEBUG: Requested variant macosx is not provided by port libgnomeui.
> DEBUG: Searching for dependency: libgnomeui
> DEBUG: Found Dependency: receipt exists for libgnomeui
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port libmng.
> DEBUG: Requested variant darwin_9 is not provided by port libmng.
> DEBUG: Requested variant i386 is not provided by port libmng.
> DEBUG: Requested variant x11 is not provided by port libmng.
> DEBUG: Requested variant macosx is not provided by port libmng.
> DEBUG: Searching for dependency: libmng
> DEBUG: Found Dependency: receipt exists for libmng
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port librsvg.
> DEBUG: Requested variant darwin_9 is not provided by port librsvg.
> DEBUG: Requested variant i386 is not provided by port librsvg.
> DEBUG: Requested variant x11 is not provided by port librsvg.
> DEBUG: Requested variant macosx is not provided by port librsvg.
> DEBUG: Searching for dependency: librsvg
> DEBUG: Found Dependency: receipt exists for librsvg
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port libwmf.
> DEBUG: Requested variant darwin_9 is not provided by port libwmf.
> DEBUG: Requested variant i386 is not provided by port libwmf.
> DEBUG: Requested variant macosx is not provided by port libwmf.
>
> DEBUG: Executing variant x11 provides x11
> DEBUG: Searching for dependency: libwmf
> DEBUG: Found Dependency: receipt exists for libwmf
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -xml-parser
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -xml-parser
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port p5-xml-parser.
> DEBUG: Requested variant darwin_9 is not provided by port p5-xml-parser.
> DEBUG: Requested variant i386 is not provided by port p5-xml-parser.
> DEBUG: Requested variant x11 is not provided by port p5-xml-parser.
> DEBUG: Requested variant macosx is not provided by port p5-xml-parser.
> DEBUG: Searching for dependency: p5-xml-parser
> DEBUG: Found Dependency: receipt exists for p5-xml-parser
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port poppler.
> DEBUG: Requested variant darwin_9 is not provided by port poppler.
> DEBUG: Requested variant i386 is not provided by port poppler.
> DEBUG: Requested variant x11 is not provided by port poppler.
> DEBUG: Requested variant macosx is not provided by port poppler.
> DEBUG: Searching for dependency: poppler
> DEBUG: Found Dependency: receipt exists for poppler
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port py25-gtk.
> DEBUG: Requested variant i386 is not provided by port py25-gtk.
> DEBUG: Requested variant x11 is not provided by port py25-gtk.
> DEBUG: Requested variant macosx is not provided by port py25-gtk.
> DEBUG: Executing variant darwin_9 provides darwin_9
> DEBUG: Searching for dependency: py25-gtk
> DEBUG: Found Dependency: receipt exists for py25-gtk
> DEBUG: Executing org.macports.main (gimp2)
> --->  Fetching gimp2
> DEBUG: Executing proc-pre-org.macports.fetch-fetch-0
> DEBUG: Executing org.macports.fetch (gimp2)
> --->  Verifying checksum(s) for gimp2
> DEBUG: Executing org.macports.checksum (gimp2)
> --->  Checksumming gimp-2.6.4.tar.bz2
> DEBUG: Correct (md5) checksum for gimp-2.6.4.tar.bz2
> DEBUG: Correct (sha1) checksum for gimp-2.6.4.tar.bz2
> DEBUG: Correct (rmd160) checksum for gimp-2.6.4.tar.bz2
> DEBUG: setting option extract.cmd to /opt/local/bin/bzip2
> --->  Extracting gimp2
> DEBUG: Executing org.macports.extract (gimp2)
> --->  Extracting gimp-2.6.4.tar.bz2
> DEBUG: setting option extract.args to
> /opt/local/var/macports/distfiles/gimp2/gimp-2.6.4.tar.bz2
> DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work"
> && /opt/local/bin/bzip2 -dc
> /opt/local/var/macports/distfiles/gimp2/gimp-2.6.4.tar.bz2 |
> /usr/bin/gnutar --no-same-owner -xf -'
> DEBUG: Executing org.macports.patch (gimp2)
> --->  Applying patches to gimp2
> --->  Applying
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2/files
> /patch-etc-gimprc.diff
> DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4"
> && patch -p0'
> patching file etc/gimprc
> DEBUG: Executing proc-post-org.macports.patch-patch-0
> --->  Configuring gimp2
> DEBUG: Using compiler 'Mac OS X gcc 4.0'
> DEBUG: Executing proc-pre-org.macports.configure-configure-0
> DEBUG: Executing org.macports.configure (gimp2)
> DEBUG: Environment: CFLAGS='-O2' CPPFLAGS='-I/opt/local/include'
> CXXFLAGS='-O2' MACOSX_DEPLOYMENT_TARGET='10.5' CPP='/usr/bin/cpp-4.0'
> CXX='/usr/bin/g++-4.0' F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib'
> FCFLAGS='-O2' OBJC='/usr/bin/gcc-4.0' INSTALL='/usr/bin/install -c'
> PYTHON='/opt/local/bin/python2.5' OBJCFLAGS='-O2' FFLAGS='-O2'
> CC='/usr/bin/gcc-4.0'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4"
> && ./configure --prefix=/opt/local --enable-mp --with-pdbgen --with-x
> --without-dbus --without-hal --without-alsa --without-gvfs --without-
> webkit'
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for gcc... /usr/bin/gcc-4.0
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether /usr/bin/gcc-4.0 accepts -g... yes
> checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
> checking for style of include used by make... GNU
> checking dependency style of /usr/bin/gcc-4.0... gcc3
> checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together...
> yes
> checking build system type... i386-apple-darwin9.6.0
> checking host system type... i386-apple-darwin9.6.0
> checking for a sed that does not truncate output... /usr/bin/sed
> checking for grep that handles long lines and -e... /usr/bin/grep
> checking for egrep... /usr/bin/grep -E
> checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-
> darwin9/4.0.1/ld
> checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is
> GNU ld... no
> checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to
> reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -p
> checking whether ln -s works... yes
> checking how to recognize dependent libraries... pass_all
> checking how to run the C preprocessor... /usr/bin/cpp-4.0
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking dlfcn.h usability... yes
> checking dlfcn.h presence... yes
> checking for dlfcn.h... yes
> checking whether we are using the GNU C++ compiler... yes
> checking whether /usr/bin/g++-4.0 accepts -g... yes
> checking dependency style of /usr/bin/g++-4.0... gcc3
> checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E
> checking for g77... no
> checking for xlf... no
> checking for f77... no
> checking for frt... no
> checking for pgf77... no
> checking for cf77... no
> checking for fort77... no
> checking for fl32... no
> checking for af77... no
> checking for xlf90... no
> checking for f90... no
> checking for pgf90... no
> checking for pghpf... no
> checking for epcf90... no
>
> checking for gfortran... no
> checking for g95... no
> checking for xlf95... no
> checking for f95... no
> checking for fort... no
> checking for ifort... no
> checking for ifc... no
> checking for efc... no
> checking for pgf95... no
> checking for lf95... no
> checking for ftn... no
> checking whether we are using the GNU Fortran 77 compiler... no
> checking whether  accepts -g... no
> checking the maximum length of command line arguments... 196608
> checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0
> object... ok
> checking for objdir... .libs
> checking for ar... ar
> checking for ranlib... ranlib
> checking for strip... strip
> checking for dsymutil... dsymutil
> checking for nmedit... nmedit
> checking for -single_module linker flag... yes
> checking for -exported_symbols_list linker flag... yes
> checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
> checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common
> checking if /usr/bin/gcc-4.0 PIC flag -fno-common works... yes
> checking if /usr/bin/gcc-4.0 static flag -static works... no
> checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
> checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686
> -apple-darwin9/4.0.1/ld) supports shared libraries... yes
> checking dynamic linker characteristics... darwin9.6.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by /usr/bin/g++-4.0... /usr/libexec/gcc/i686-apple-
> darwin9/4.0.1/ld
> checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is
> GNU ld... no
> checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686
> -apple-darwin9/4.0.1/ld) supports shared libraries... yes
> checking for /usr/bin/g++-4.0 option to produce PIC... -fno-common
> checking if /usr/bin/g++-4.0 PIC flag -fno-common works... yes
> checking if /usr/bin/g++-4.0 static flag -static works... no
> checking if /usr/bin/g++-4.0 supports -c -o file.o... yes
> checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686
> -apple-darwin9/4.0.1/ld) supports shared libraries... yes
> checking dynamic linker characteristics... darwin9.6.0 dyld
> (cached) (cached) checking how to hardcode library paths into programs...
> immediate
> appending configuration tag "F77" to libtool
> checking dependency style of /usr/bin/gcc-4.0... gcc3
> checking whether to enable maintainer-specific portions of Makefiles...
> no
> checking for pkg-config... /opt/local/bin/pkg-config
> checking pkg-config is at least version 0.16... yes
> checking for target architecture... i386-apple-darwin9.6.0
> checking for some Win32 platform... no
> checking for native Win32... no
> checking for library containing strerror... none required
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether make sets $(MAKE)... (cached) yes
> checking for special C compiler options needed for large files... no
> checking for _FILE_OFFSET_BITS value needed for large files... no
> checking whether to turn on debugging... no
> checking whether to turn on profiling... no
> checking whether /usr/bin/gcc-4.0 understands -Wdeclaration-after-
> statement... yes
> checking whether /usr/bin/gcc-4.0 understands -Wmissing-prototypes... yes
> checking whether /usr/bin/gcc-4.0 understands -Wmissing-declarations...
> yes
> checking whether /usr/bin/gcc-4.0 understands -Winit-self... yes
> checking whether /usr/bin/gcc-4.0 understands -Wpointer-arith... yes
> checking whether /usr/bin/gcc-4.0 understands -Wold-style-definition...
> yes
> checking for ANSI C header files... (cached) yes
> checking for sys/wait.h that is POSIX.1 compatible... yes
> checking whether time.h and sys/time.h may both be included... yes
> checking sys/param.h usability... yes
> checking sys/param.h presence... yes
> checking for sys/param.h... yes
> checking sys/time.h usability... yes
> checking sys/time.h presence... yes
> checking for sys/time.h... yes
> checking sys/times.h usability... yes
> checking sys/times.h presence... yes
> checking for sys/times.h... yes
> checking for sys/wait.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for pid_t... yes
> checking return type of signal handlers... void
> checking for vprintf... yes
> checking for _doprnt... no
> checking for working alloca.h... yes
> checking for alloca... yes
> checking for difftime... yes
> checking for mmap... yes
> checking whether binary relocation support should be enabled... no
> checking for _NL_MEASUREMENT_MEASUREMENT... no
> checking whether NLS is requested... yes
> checking for intltool >= 0.35.5... 0.40.5 found
> checking for intltool-update... /opt/local/bin/intltool-update
> checking for intltool-merge... /opt/local/bin/intltool-merge
> checking for intltool-extract... /opt/local/bin/intltool-extract
> checking for xgettext... /opt/local/bin/xgettext
> checking for msgmerge... /opt/local/bin/msgmerge
> checking for msgfmt... /opt/local/bin/msgfmt
> checking for gmsgfmt... /opt/local/bin/msgfmt
> checking for perl... /opt/local/bin/perl
> checking for XML::Parser... configure: error: XML::Parser perl module is
> required for intltool
> Error: Target org.macports.configure returned: configure failure: shell
> command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4"
> && ./configure --prefix=/opt/local --enable-mp --with-pdbgen --with-x
> --without-dbus --without-hal --without-alsa --without-gvfs --without-
> webkit " returned error 1
> Command output: checking for sys/param.h... yes
> checking sys/time.h usability... yes
> checking sys/time.h presence... yes
> checking for sys/time.h... yes
> checking sys/times.h usability... yes
> checking sys/times.h presence... yes
> checking for sys/times.h... yes
> checking for sys/wait.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for pid_t... yes
> checking return type of signal handlers... void
> checking for vprintf... yes
> checking for _doprnt... no
> checking for working alloca.h... yes
> checking for alloca... yes
> checking for difftime... yes
> checking for mmap... yes
> checking whether binary relocation support should be enabled... no
> checking for _NL_MEASUREMENT_MEASUREMENT... no
> checking whether NLS is requested... yes
> checking for intltool >= 0.35.5... 0.40.5 found
> checking for intltool-update... /opt/local/bin/intltool-update
> checking for intltool-merge... /opt/local/bin/intltool-merge
> checking for intltool-extract... /opt/local/bin/intltool-extract
> checking for xgettext... /opt/local/bin/xgettext
> checking for msgmerge... /opt/local/bin/msgmerge
> checking for msgfmt... /opt/local/bin/msgfmt
> checking for gmsgfmt... /opt/local/bin/msgfmt
> checking for perl... /opt/local/bin/perl
> checking for XML::Parser... configure: error: XML::Parser perl module is
> required for intltool
>
> Warning: the following items did not execute (for gimp2):
> org.macports.destroot org.macports.configure org.macports.build
> DEBUG: invalid command name "::ui_init"
>     while executing
> "::ui_init $priority $prefix $channels $message"
>     ("uplevel" body line 2)
>     invoked from within
> "uplevel 1 $body"
> Error: Unable to upgrade port: 1
> }}}

New description:

 I got an error when upgrading to gimp2 2.6.4.
 {{{
 checking for XML::Parser... configure: error: XML::Parser perl module is
 required for intltool
 }}}
 So I did:
 {{{
 $ sudo cpan
 cpan> install XML::Parser
 }}}
 Which installed nicely. But I still get the same error from macports!
 {{{
 $ sudo port -d upgrade gimp2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gimp2 2.6.4_0 exists in the ports tree
 DEBUG: gimp2 2.6.3_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gegl 0.0.22_1 exists in the ports tree
 DEBUG: gegl 0.0.22_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1 is installed
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/w3m
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: w3m 0.5.2_1 exists in the ports tree
 DEBUG: w3m 0.5.2_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boehmgc
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: boehmgc 7.1_0 exists in the ports tree
 DEBUG: boehmgc 7.1_0 is installed
 DEBUG: No need to upgrade! boehmgc 7.1_0 >= boehmgc 7.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.3_2 exists in the ports tree
 DEBUG: zlib 1.2.3_2 is installed
 DEBUG: No need to upgrade! zlib 1.2.3_2 >= zlib 1.2.3_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: openssl 0.9.8i_0 exists in the ports tree
 DEBUG: openssl 0.9.8i_0 is installed
 DEBUG: No need to upgrade! openssl 0.9.8i_0 >= openssl 0.9.8i_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 is installed
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_3 exists in the ports tree
 DEBUG: gettext 0.17_3 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.12_0 exists in the ports tree
 DEBUG: libiconv 1.12_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.3_0 exists in the ports tree
 DEBUG: gperf 3.0.3_0 is installed
 DEBUG: No need to upgrade! gperf 3.0.3_0 >= gperf 3.0.3_0
 DEBUG: No need to upgrade! libiconv 1.12_0 >= libiconv 1.12_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0 is installed
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_3 >= gettext 0.17_3
 DEBUG: No need to upgrade! w3m 0.5.2_1 >= w3m 0.5.2_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/babl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: babl 0.0.22_0 exists in the ports tree
 DEBUG: babl 0.0.22_0 is installed
 DEBUG: No need to upgrade! babl 0.0.22_0 >= babl 0.0.22_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gtk2 2.14.5_0 exists in the ports tree
 DEBUG: gtk2 2.14.5_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gtk-doc
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gtk-doc 1.11_0 exists in the ports tree
 DEBUG: gtk-doc 1.11_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: rarian 0.8.1_0 exists in the ports tree
 DEBUG: rarian 0.8.1_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: intltool 0.40.5_0 exists in the ports tree
 DEBUG: intltool 0.40.5_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-common
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gnome-common 2.24.0_1 exists in the ports tree
 DEBUG: gnome-common 2.24.0_1 is installed
 DEBUG: No need to upgrade! gnome-common 2.24.0_1 >= gnome-common 2.24.0_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: perl5 is *not* installed by MacPorts
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Searching for dependency: perl5
 DEBUG: Didn't find receipt, going to depspec regex for: perl5
 DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$
 DEBUG: perl5 installed outside the MacPorts system
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0 is installed
 DEBUG: Not following dependencies
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -xml-parser
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-xml-parser 2.36_0 exists in the ports tree
 DEBUG: p5-xml-parser 2.36_0 is installed
 DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0
 DEBUG: No need to upgrade! intltool 0.40.5_0 >= intltool 0.40.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: getopt 1.1.4_1 exists in the ports tree
 DEBUG: getopt 1.1.4_1 is installed
 DEBUG: No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libxslt 1.1.24_1 exists in the ports tree
 DEBUG: libxslt 1.1.24_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libxml2 2.7.2_1 exists in the ports tree
 DEBUG: libxml2 2.7.2_1 is installed
 DEBUG: No need to upgrade! libxml2 2.7.2_1 >= libxml2 2.7.2_1
 DEBUG: No need to upgrade! libxslt 1.1.24_1 >= libxslt 1.1.24_1
 DEBUG: No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-doc-utils
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gnome-doc-utils 0.14.1_0 exists in the ports tree
 DEBUG: gnome-doc-utils 0.14.1_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-hashlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-hashlib 2.5.4_0 exists in the ports tree
 DEBUG: py25-hashlib 2.5.4_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: python25 2.5.4_0 exists in the ports tree
 DEBUG: python25 2.5.4_0 is installed
 DEBUG: No need to upgrade! python25 2.5.4_0 >= python25 2.5.4_0
 DEBUG: No need to upgrade! py25-hashlib 2.5.4_0 >= py25-hashlib 2.5.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-libxml2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-libxml2 2.6.21_1 exists in the ports tree
 DEBUG: py25-libxml2 2.6.21_1 is installed
 DEBUG: No need to upgrade! py25-libxml2 2.6.21_1 >= py25-libxml2 2.6.21_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: docbook-xml 5.0_0 exists in the ports tree
 DEBUG: docbook-xml 5.0_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.1.2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
 DEBUG: docbook-xml-4.1.2 4.1.2_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xmlcatmgr 2.2_1 exists in the ports tree
 DEBUG: xmlcatmgr 2.2_1 is installed
 DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
 DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2
 4.1.2_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree
 DEBUG: docbook-xml-4.2 4.2_0 is installed
 DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree
 DEBUG: docbook-xml-4.3 4.3_0 is installed
 DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree
 DEBUG: docbook-xml-4.4 4.4_0 is installed
 DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-4.5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree
 DEBUG: docbook-xml-4.5 4.5_0 is installed
 DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xml-5.0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree
 DEBUG: docbook-xml-5.0 5.0_0 is installed
 DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0
 DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc
 /docbook-xsl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: docbook-xsl 1.74.0_0 exists in the ports tree
 DEBUG: docbook-xsl 1.74.0_0 is installed
 DEBUG: No need to upgrade! docbook-xsl 1.74.0_0 >= docbook-xsl 1.74.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /iso-codes
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: iso-codes 3.5_0 exists in the ports tree
 DEBUG: iso-codes 3.5_0 is installed
 DEBUG: No need to upgrade! iso-codes 3.5_0 >= iso-codes 3.5_0
 DEBUG: No need to upgrade! gnome-doc-utils 0.14.1_0 >= gnome-doc-utils
 0.14.1_0
 DEBUG: No need to upgrade! gtk-doc 1.11_0 >= gtk-doc 1.11_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: cairo 1.8.6_1 exists in the ports tree
 DEBUG: cairo 1.8.6_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpixman 0.12.0_1 exists in the ports tree
 DEBUG: libpixman 0.12.0_1 is installed
 DEBUG: No need to upgrade! libpixman 0.12.0_1 >= libpixman 0.12.0_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.4_4 exists in the ports tree
 DEBUG: xrender 0.9.4_4 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.14_1 exists in the ports tree
 DEBUG: xorg-xproto 7.0.14_1 is installed
 DEBUG: No need to upgrade! xorg-xproto 7.0.14_1 >= xorg-xproto 7.0.14_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-renderproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-renderproto 0.9.3_0 exists in the ports tree
 DEBUG: xorg-renderproto 0.9.3_0 is installed
 DEBUG: No need to upgrade! xorg-renderproto 0.9.3_0 >= xorg-renderproto
 0.9.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: xorg-libX11 is *not* installed by MacPorts
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Searching for dependency: xorg-libX11
 DEBUG: Didn't find receipt, going to depspec regex for: xorg-libX11
 DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.dylib
 regex: ^libX11\.dylib$
 DEBUG: xorg-libX11 installed outside the MacPorts system
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.1.5_1 exists in the ports tree
 DEBUG: xorg-libX11 1.1.5_1 is installed
 DEBUG: Not following dependencies
 DEBUG: No need to upgrade! xorg-libX11 1.1.5_1 >= xorg-libX11 1.1.5_1
 DEBUG: No need to upgrade! xrender 0.9.4_4 >= xrender 0.9.4_4
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fontconfig 2.6.0_1 exists in the ports tree
 DEBUG: fontconfig 2.6.0_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freetype 2.3.7_3 exists in the ports tree
 DEBUG: freetype 2.3.7_3 is installed
 DEBUG: No need to upgrade! freetype 2.3.7_3 >= freetype 2.3.7_3
 DEBUG: No need to upgrade! fontconfig 2.6.0_1 >= fontconfig 2.6.0_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpng 1.2.34_0 exists in the ports tree
 DEBUG: libpng 1.2.34_0 is installed
 DEBUG: No need to upgrade! libpng 1.2.34_0 >= libpng 1.2.34_0
 DEBUG: No need to upgrade! cairo 1.8.6_1 >= cairo 1.8.6_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: glib2 2.18.3_0 exists in the ports tree
 DEBUG: glib2 2.18.3_0 is installed
 DEBUG: No need to upgrade! glib2 2.18.3_0 >= glib2 2.18.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jpeg 6b_3 exists in the ports tree
 DEBUG: jpeg 6b_3 is installed
 DEBUG: No need to upgrade! jpeg 6b_3 >= jpeg 6b_3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tiff 3.8.2_2 exists in the ports tree
 DEBUG: tiff 3.8.2_2 is installed
 DEBUG: No need to upgrade! tiff 3.8.2_2 >= tiff 3.8.2_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jasper 1.900.1_2 exists in the ports tree
 DEBUG: jasper 1.900.1_2 is installed
 DEBUG: No need to upgrade! jasper 1.900.1_2 >= jasper 1.900.1_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: atk 1.24.0_0 exists in the ports tree
 DEBUG: atk 1.24.0_0 is installed
 DEBUG: No need to upgrade! atk 1.24.0_0 >= atk 1.24.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pango 1.22.4_0 exists in the ports tree
 DEBUG: pango 1.22.4_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: Xft2 2.1.13_0 exists in the ports tree
 DEBUG: Xft2 2.1.13_0 is installed
 DEBUG: No need to upgrade! Xft2 2.1.13_0 >= Xft2 2.1.13_0
 DEBUG: No need to upgrade! pango 1.22.4_0 >= pango 1.22.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXi
 DEBUG: xorg-libXi is *not* installed by MacPorts
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-libXi.
 DEBUG: Requested variant i386 is not provided by port xorg-libXi.
 DEBUG: Requested variant macosx is not provided by port xorg-libXi.
 DEBUG: Searching for dependency: xorg-libXi
 DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXi
 DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXi.6.dylib
 regex: ^libXi\.6\.dylib$
 DEBUG: xorg-libXi installed outside the MacPorts system
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXi 1.2.0_0 exists in the ports tree
 DEBUG: xorg-libXi 1.2.0_0 is installed
 DEBUG: Not following dependencies
 DEBUG: No need to upgrade! xorg-libXi 1.2.0_0 >= xorg-libXi 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXrandr
 DEBUG: xorg-libXrandr is *not* installed by MacPorts
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
 DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
 DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
 DEBUG: Searching for dependency: xorg-libXrandr
 DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXrandr








 DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXrandr.2.dylib
 regex: ^libXrandr\.2\.dylib$
 DEBUG: xorg-libXrandr installed outside the MacPorts system
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXrandr 1.2.3_0 exists in the ports tree
 DEBUG: xorg-libXrandr 1.2.3_0 is installed
 DEBUG: Not following dependencies
 DEBUG: No need to upgrade! xorg-libXrandr 1.2.3_0 >= xorg-libXrandr
 1.2.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXcursor
 DEBUG: xorg-libXcursor is *not* installed by MacPorts
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcursor
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-libXcursor.
 DEBUG: Requested variant i386 is not provided by port xorg-libXcursor.
 DEBUG: Requested variant macosx is not provided by port xorg-libXcursor.
 DEBUG: Searching for dependency: xorg-libXcursor
 DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXcursor
 DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libXcursor.1.dylib
 regex: ^libXcursor\.1\.dylib$
 DEBUG: xorg-libXcursor installed outside the MacPorts system
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXcursor 1.1.9_0 exists in the ports tree
 DEBUG: xorg-libXcursor 1.1.9_0 is installed
 DEBUG: Not following dependencies
 DEBUG: No need to upgrade! xorg-libXcursor 1.1.9_0 >= xorg-libXcursor
 1.1.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXinerama
 DEBUG: xorg-libXinerama is *not* installed by MacPorts
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXinerama
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-libXinerama.
 DEBUG: Requested variant i386 is not provided by port xorg-libXinerama.
 DEBUG: Requested variant macosx is not provided by port xorg-libXinerama.
 DEBUG: Searching for dependency: xorg-libXinerama
 DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXinerama
 DEBUG: Found Dependency: path: /usr/X11R6/lib filename:
 libXinerama.1.dylib regex: ^libXinerama\.1\.dylib$
 DEBUG: xorg-libXinerama installed outside the MacPorts system
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXinerama 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXinerama 1.0.3_0 is installed
 DEBUG: Not following dependencies
 DEBUG: No need to upgrade! xorg-libXinerama 1.0.3_0 >= xorg-libXinerama
 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /shared-mime-info
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: shared-mime-info 0.51_0 exists in the ports tree
 DEBUG: shared-mime-info 0.51_0 is installed
 DEBUG: No need to upgrade! shared-mime-info 0.51_0 >= shared-mime-info
 0.51_0
 DEBUG: No need to upgrade! gtk2 2.14.5_0 >= gtk2 2.14.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/lua
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lua 5.1.4_0 exists in the ports tree
 DEBUG: lua 5.1.4_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: readline 5.2.012_1 exists in the ports tree
 DEBUG: readline 5.2.012_1 is installed
 DEBUG: No need to upgrade! readline 5.2.012_1 >= readline 5.2.012_1

 DEBUG: No need to upgrade! lua 5.1.4_0 >= lua 5.1.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: openexr 1.6.1_1 exists in the ports tree
 DEBUG: openexr 1.6.1_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6a_0 exists in the ports tree
 DEBUG: libtool 2.2.6a_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.10.2_0 exists in the ports tree
 DEBUG: automake 1.10.2_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.63_0 exists in the ports tree
 DEBUG: autoconf 2.63_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.12_1 exists in the ports tree
 DEBUG: m4 1.4.12_1 is installed
 DEBUG: No need to upgrade! m4 1.4.12_1 >= m4 1.4.12_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.36.4_1 exists in the ports tree
 DEBUG: help2man 1.36.4_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_0 is installed
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
 1.05_0
 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
 DEBUG: No need to upgrade! autoconf 2.63_0 >= autoconf 2.63_0
 DEBUG: No need to upgrade! automake 1.10.2_0 >= automake 1.10.2_0
 DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ilmbase 1.0.1_2 exists in the ports tree
 DEBUG: ilmbase 1.0.1_2 is installed
 DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
 DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libopenraw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libopenraw 0.0.5_0 exists in the ports tree
 DEBUG: libopenraw 0.0.5_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: boost 1.37.0_0 exists in the ports tree
 DEBUG: boost 1.37.0_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /boost-jam
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: boost-jam 3.1.16_0 exists in the ports tree
 DEBUG: boost-jam 3.1.16_0 is installed
 DEBUG: No need to upgrade! boost-jam 3.1.16_0 >= boost-jam 3.1.16_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gmake 3.81_0 exists in the ports tree
 DEBUG: gmake 3.81_0 is installed
 DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: bzip2 1.0.5_1 exists in the ports tree
 DEBUG: bzip2 1.0.5_1 is installed
 DEBUG: No need to upgrade! bzip2 1.0.5_1 >= bzip2 1.0.5_1
 DEBUG: No need to upgrade! boost 1.37.0_0 >= boost 1.37.0_0
 DEBUG: No need to upgrade! libopenraw 0.0.5_0 >= libopenraw 0.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: librsvg 2.22.3_0 exists in the ports tree
 DEBUG: librsvg 2.22.3_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libcroco
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libcroco 0.6.1_1 exists in the ports tree
 DEBUG: libcroco 0.6.1_1 is installed
 DEBUG: No need to upgrade! libcroco 0.6.1_1 >= libcroco 0.6.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgsf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libgsf 1.14.10_1 exists in the ports tree
 DEBUG: libgsf 1.14.10_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-vfs
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gnome-vfs 2.24.0_0 exists in the ports tree
 DEBUG: gnome-vfs 2.24.0_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gconf 2.24.0_0 exists in the ports tree
 DEBUG: gconf 2.24.0_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: dbus 1.2.10_0 exists in the ports tree
 DEBUG: dbus 1.2.10_0 is installed
 DEBUG: No need to upgrade! dbus 1.2.10_0 >= dbus 1.2.10_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /dbus-glib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: dbus-glib 0.78_0 exists in the ports tree
 DEBUG: dbus-glib 0.78_0 is installed
 DEBUG: No need to upgrade! dbus-glib 0.78_0 >= dbus-glib 0.78_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: orbit2 2.14.16_0 exists in the ports tree
 DEBUG: orbit2 2.14.16_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libidl 0.8.12_0 exists in the ports tree
 DEBUG: libidl 0.8.12_0 is installed
 DEBUG: No need to upgrade! libidl 0.8.12_0 >= libidl 0.8.12_0
 DEBUG: No need to upgrade! orbit2 2.14.16_0 >= orbit2 2.14.16_0
 DEBUG: No need to upgrade! gconf 2.24.0_0 >= gconf 2.24.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /desktop-file-utils
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: desktop-file-utils 0.15_1 exists in the ports tree
 DEBUG: desktop-file-utils 0.15_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: popt 1.14_0 exists in the ports tree
 DEBUG: popt 1.14_0 is installed
 DEBUG: No need to upgrade! popt 1.14_0 >= popt 1.14_0
 DEBUG: No need to upgrade! desktop-file-utils 0.15_1 >= desktop-file-utils
 0.15_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-mime-data
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gnome-mime-data 2.18.0_3 exists in the ports tree
 DEBUG: gnome-mime-data 2.18.0_3 is installed
 DEBUG: No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-data
 2.18.0_3
 DEBUG: No need to upgrade! gnome-vfs 2.24.0_0 >= gnome-vfs 2.24.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonobo
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libbonobo 2.24.0_0 exists in the ports tree
 DEBUG: libbonobo 2.24.0_0 is installed
 DEBUG: No need to upgrade! libbonobo 2.24.0_0 >= libbonobo 2.24.0_0
 DEBUG: No need to upgrade! libgsf 1.14.10_1 >= libgsf 1.14.10_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
 DEBUG: libart_lgpl 2.3.20_0 is installed
 DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
 DEBUG: No need to upgrade! librsvg 2.22.3_0 >= librsvg 2.22.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libsdl 1.2.13_2 exists in the ports tree
 DEBUG: libsdl 1.2.13_2 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/XFree86
 DEBUG: XFree86 is *not* installed by MacPorts
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/XFree86
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant i386 is not provided by port XFree86.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant macosx provides macosx
 DEBUG: Searching for dependency: XFree86
 DEBUG: Didn't find receipt, going to depspec regex for: XFree86
 DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.6.dylib
 regex: ^libX11\.6\.dylib$
 DEBUG: Found Dependency: path: /usr/X11R6/lib filename: libX11.6.dylib
 regex: ^libX11\.6\.dylib$
 DEBUG: XFree86 installed outside the MacPorts system
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: XFree86 4.7.0_0 exists in the ports tree
 DEBUG: XFree86 4.7.0_0 is installed
 DEBUG: Not following dependencies
 DEBUG: No need to upgrade! XFree86 4.7.0_0 >= XFree86 4.7.0_0
 DEBUG: No need to upgrade! libsdl 1.2.13_2 >= libsdl 1.2.13_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: graphviz 2.20.3_0 exists in the ports tree
 DEBUG: graphviz 2.20.3_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /urw-fonts
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: urw-fonts 1.0.7pre44_0 exists in the ports tree
 DEBUG: urw-fonts 1.0.7pre44_0 is installed
 DEBUG: No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts
 1.0.7pre44_0
 DEBUG: No need to upgrade! graphviz 2.20.3_0 >= graphviz 2.20.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ffmpeg 15261_1 exists in the ports tree
 DEBUG: ffmpeg 15261_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/subversion
 DEBUG: subversion is *not* installed by MacPorts
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/subversion
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port subversion.
 DEBUG: Requested variant i386 is not provided by port subversion.
 DEBUG: Requested variant macosx is not provided by port subversion.
 DEBUG: Searching for dependency: subversion
 DEBUG: Didn't find receipt, going to depspec regex for: subversion
 DEBUG: Found Dependency: path: /usr/bin filename: svn regex: ^svn$
 DEBUG: subversion installed outside the MacPorts system
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: subversion 1.5.5_0 exists in the ports tree
 DEBUG: subversion 1.5.5_0 is installed
 DEBUG: Not following dependencies
 DEBUG: No need to upgrade! subversion 1.5.5_0 >= subversion 1.5.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/a52dec
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: a52dec 0.7.4_0 exists in the ports tree
 DEBUG: a52dec 0.7.4_0 is installed
 DEBUG: No need to upgrade! a52dec 0.7.4_0 >= a52dec 0.7.4_0
 DEBUG: No need to upgrade! ffmpeg 15261_1 >= ffmpeg 15261_1

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libspiro
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libspiro 20071029_0 exists in the ports tree
 DEBUG: libspiro 20071029_0 is installed
 DEBUG: No need to upgrade! libspiro 20071029_0 >= libspiro 20071029_0
 DEBUG: No need to upgrade! gegl 0.0.22_1 >= gegl 0.0.22_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: aalib 1.4rc5_3 exists in the ports tree
 DEBUG: aalib 1.4rc5_3 is installed
 DEBUG: No need to upgrade! aalib 1.4rc5_3 >= aalib 1.4rc5_3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: curl 7.19.2_0 exists in the ports tree
 DEBUG: curl 7.19.2_0 is installed
 DEBUG: No need to upgrade! curl 7.19.2_0 >= curl 7.19.2_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libexif 0.6.17_0 exists in the ports tree
 DEBUG: libexif 0.6.17_0 is installed
 DEBUG: No need to upgrade! libexif 0.6.17_0 >= libexif 0.6.17_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libgnomeui 2.24.0_0 exists in the ports tree
 DEBUG: libgnomeui 2.24.0_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonoboui
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libbonoboui 2.24.0_0 exists in the ports tree
 DEBUG: libbonoboui 2.24.0_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libglade2 2.6.3_0 exists in the ports tree
 DEBUG: libglade2 2.6.3_0 is installed
 DEBUG: No need to upgrade! libglade2 2.6.3_0 >= libglade2 2.6.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomecanvas
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libgnomecanvas 2.20.1.1_1 exists in the ports tree
 DEBUG: libgnomecanvas 2.20.1.1_1 is installed
 DEBUG: No need to upgrade! libgnomecanvas 2.20.1.1_1 >= libgnomecanvas
 2.20.1.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnome
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libgnome 2.24.1_1 exists in the ports tree
 DEBUG: libgnome 2.24.1_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: esound 0.2.41_1 exists in the ports tree
 DEBUG: esound 0.2.41_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: audiofile 0.2.6_2 exists in the ports tree
 DEBUG: audiofile 0.2.6_2 is installed
 DEBUG: No need to upgrade! audiofile 0.2.6_2 >= audiofile 0.2.6_2
 DEBUG: No need to upgrade! esound 0.2.41_1 >= esound 0.2.41_1
 DEBUG: No need to upgrade! libgnome 2.24.1_1 >= libgnome 2.24.1_1
 DEBUG: No need to upgrade! libbonoboui 2.24.0_0 >= libbonoboui 2.24.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-icon-theme
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gnome-icon-theme 2.24.0_0 exists in the ports tree
 DEBUG: gnome-icon-theme 2.24.0_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /hicolor-icon-theme
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: hicolor-icon-theme 0.10_0 exists in the ports tree
 DEBUG: hicolor-icon-theme 0.10_0 is installed
 DEBUG: No need to upgrade! hicolor-icon-theme 0.10_0 >= hicolor-icon-theme
 0.10_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /icon-naming-utils
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: icon-naming-utils 0.8.7_0 exists in the ports tree
 DEBUG: icon-naming-utils 0.8.7_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -xml-simple
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-xml-simple 2.18_0 exists in the ports tree
 DEBUG: p5-xml-simple 2.18_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -xml-namespacesupport
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-xml-namespacesupport 1.09_0 exists in the ports tree
 DEBUG: p5-xml-namespacesupport 1.09_0 is installed
 DEBUG: No need to upgrade! p5-xml-namespacesupport 1.09_0 >= p5-xml-
 namespacesupport 1.09_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -xml-sax
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-xml-sax 0.96_1 exists in the ports tree
 DEBUG: p5-xml-sax 0.96_1 is installed
 DEBUG: No need to upgrade! p5-xml-sax 0.96_1 >= p5-xml-sax 0.96_1
 DEBUG: No need to upgrade! p5-xml-simple 2.18_0 >= p5-xml-simple 2.18_0
 DEBUG: No need to upgrade! icon-naming-utils 0.8.7_0 >= icon-naming-utils
 0.8.7_0
 DEBUG: No need to upgrade! gnome-icon-theme 2.24.0_0 >= gnome-icon-theme
 2.24.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-keyring
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gnome-keyring 2.24.1_0 exists in the ports tree
 DEBUG: gnome-keyring 2.24.1_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libgcrypt 1.4.3_0 exists in the ports tree
 DEBUG: libgcrypt 1.4.3_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libgpg-error
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libgpg-error 1.7_0 exists in the ports tree
 DEBUG: libgpg-error 1.7_0 is installed
 DEBUG: No need to upgrade! libgpg-error 1.7_0 >= libgpg-error 1.7_0
 DEBUG: No need to upgrade! libgcrypt 1.4.3_0 >= libgcrypt 1.4.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtasn1 1.7_0 exists in the ports tree
 DEBUG: libtasn1 1.7_0 is installed
 DEBUG: No need to upgrade! libtasn1 1.7_0 >= libtasn1 1.7_0
 DEBUG: No need to upgrade! gnome-keyring 2.24.1_0 >= gnome-keyring
 2.24.1_0
 DEBUG: No need to upgrade! libgnomeui 2.24.0_0 >= libgnomeui 2.24.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libmng 1.0.10_0 exists in the ports tree
 DEBUG: libmng 1.0.10_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lcms 1.17_0 exists in the ports tree
 DEBUG: lcms 1.17_0 is installed
 DEBUG: No need to upgrade! lcms 1.17_0 >= lcms 1.17_0
 DEBUG: No need to upgrade! libmng 1.0.10_0 >= libmng 1.0.10_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libwmf 0.2.8.4_0 exists in the ports tree
 DEBUG: libwmf 0.2.8.4_0 is installed
 DEBUG: No need to upgrade! libwmf 0.2.8.4_0 >= libwmf 0.2.8.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: poppler 0.10.2_1 exists in the ports tree
 DEBUG: poppler 0.10.2_1 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openjpeg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: openjpeg 1.3_2 exists in the ports tree
 DEBUG: openjpeg 1.3_2 is installed
 DEBUG: No need to upgrade! openjpeg 1.3_2 >= openjpeg 1.3_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
 /poppler-data
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: poppler-data 0.2.1_0 exists in the ports tree
 DEBUG: poppler-data 0.2.1_0 is installed
 DEBUG: No need to upgrade! poppler-data 0.2.1_0 >= poppler-data 0.2.1_0
 DEBUG: No need to upgrade! poppler 0.10.2_1 >= poppler 0.10.2_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-gtk 2.12.1_0 exists in the ports tree
 DEBUG: py25-gtk 2.12.1_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-cairo
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-cairo 1.8.0_0 exists in the ports tree
 DEBUG: py25-cairo 1.8.0_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-numpy 1.2.1_0 exists in the ports tree
 DEBUG: py25-numpy 1.2.1_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fftw-3 3.2_1 exists in the ports tree
 DEBUG: fftw-3 3.2_1 is installed
 DEBUG: No need to upgrade! fftw-3 3.2_1 >= fftw-3 3.2_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-nose
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-nose 0.10.4_0 exists in the ports tree
 DEBUG: py25-nose 0.10.4_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-setuptools
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-setuptools 0.6c9_0 exists in the ports tree
 DEBUG: py25-setuptools 0.6c9_0 is installed
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-zlib 2.5.4_0 exists in the ports tree
 DEBUG: py25-zlib 2.5.4_0 is installed
 DEBUG: No need to upgrade! py25-zlib 2.5.4_0 >= py25-zlib 2.5.4_0
 DEBUG: No need to upgrade! py25-setuptools 0.6c9_0 >= py25-setuptools
 0.6c9_0
 DEBUG: No need to upgrade! py25-nose 0.10.4_0 >= py25-nose 0.10.4_0
 DEBUG: No need to upgrade! py25-numpy 1.2.1_0 >= py25-numpy 1.2.1_0
 DEBUG: No need to upgrade! py25-cairo 1.8.0_0 >= py25-cairo 1.8.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gobject
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: py25-gobject 2.14.2_0 exists in the ports tree
 DEBUG: py25-gobject 2.14.2_0 is installed
 DEBUG: No need to upgrade! py25-gobject 2.14.2_0 >= py25-gobject 2.14.2_0
 DEBUG: No need to upgrade! py25-gtk 2.12.1_0 >= py25-gtk 2.12.1_0
 DEBUG: variants to install {} darwin_9 x11
 DEBUG: available variants are : darwin_7 darwin_9 no_python dbus gvfs
 help_browser quartz x11 no_x11 universal
 DEBUG: variant darwin_9 is present in gimp2 2.6.4_0
 DEBUG: variant x11 is present in gimp2 2.6.4_0
 DEBUG: new portvariants: darwin_9 + x11 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port gimp2.
 DEBUG: Requested variant i386 is not provided by port gimp2.
 DEBUG: Requested variant macosx is not provided by port gimp2.
 DEBUG: Executing variant darwin_9 provides darwin_9
 DEBUG: Executing variant x11 provides x11
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gegl
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port gegl.
 DEBUG: Requested variant darwin_9 is not provided by port gegl.
 DEBUG: Requested variant i386 is not provided by port gegl.
 DEBUG: Requested variant x11 is not provided by port gegl.
 DEBUG: Requested variant macosx is not provided by port gegl.
 DEBUG: Searching for dependency: gegl
 DEBUG: Found Dependency: receipt exists for gegl
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port aalib.
 DEBUG: Requested variant darwin_9 is not provided by port aalib.
 DEBUG: Requested variant i386 is not provided by port aalib.
 DEBUG: Requested variant macosx is not provided by port aalib.
 DEBUG: Executing variant x11 provides x11
 DEBUG: Searching for dependency: aalib
 DEBUG: Found Dependency: receipt exists for aalib
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port curl.
 DEBUG: Requested variant darwin_9 is not provided by port curl.
 DEBUG: Requested variant i386 is not provided by port curl.
 DEBUG: Requested variant x11 is not provided by port curl.
 DEBUG: Requested variant macosx is not provided by port curl.
 DEBUG: Searching for dependency: curl
 DEBUG: Found Dependency: receipt exists for curl
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port libart_lgpl.
 DEBUG: Requested variant darwin_9 is not provided by port libart_lgpl.
 DEBUG: Requested variant i386 is not provided by port libart_lgpl.
 DEBUG: Requested variant x11 is not provided by port libart_lgpl.
 DEBUG: Requested variant macosx is not provided by port libart_lgpl.
 DEBUG: Searching for dependency: libart_lgpl
 DEBUG: Found Dependency: receipt exists for libart_lgpl
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port libexif.
 DEBUG: Requested variant darwin_9 is not provided by port libexif.
 DEBUG: Requested variant i386 is not provided by port libexif.
 DEBUG: Requested variant x11 is not provided by port libexif.
 DEBUG: Requested variant macosx is not provided by port libexif.
 DEBUG: Searching for dependency: libexif
 DEBUG: Found Dependency: receipt exists for libexif
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port libgnomeui.
 DEBUG: Requested variant darwin_9 is not provided by port libgnomeui.
 DEBUG: Requested variant i386 is not provided by port libgnomeui.
 DEBUG: Requested variant x11 is not provided by port libgnomeui.
 DEBUG: Requested variant macosx is not provided by port libgnomeui.
 DEBUG: Searching for dependency: libgnomeui
 DEBUG: Found Dependency: receipt exists for libgnomeui
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port libmng.
 DEBUG: Requested variant darwin_9 is not provided by port libmng.
 DEBUG: Requested variant i386 is not provided by port libmng.
 DEBUG: Requested variant x11 is not provided by port libmng.
 DEBUG: Requested variant macosx is not provided by port libmng.
 DEBUG: Searching for dependency: libmng
 DEBUG: Found Dependency: receipt exists for libmng
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port librsvg.
 DEBUG: Requested variant darwin_9 is not provided by port librsvg.
 DEBUG: Requested variant i386 is not provided by port librsvg.
 DEBUG: Requested variant x11 is not provided by port librsvg.
 DEBUG: Requested variant macosx is not provided by port librsvg.
 DEBUG: Searching for dependency: librsvg
 DEBUG: Found Dependency: receipt exists for librsvg
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libwmf
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port libwmf.
 DEBUG: Requested variant darwin_9 is not provided by port libwmf.
 DEBUG: Requested variant i386 is not provided by port libwmf.
 DEBUG: Requested variant macosx is not provided by port libwmf.

 DEBUG: Executing variant x11 provides x11
 DEBUG: Searching for dependency: libwmf
 DEBUG: Found Dependency: receipt exists for libwmf
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -xml-parser
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -xml-parser
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port p5-xml-parser.
 DEBUG: Requested variant darwin_9 is not provided by port p5-xml-parser.
 DEBUG: Requested variant i386 is not provided by port p5-xml-parser.
 DEBUG: Requested variant x11 is not provided by port p5-xml-parser.
 DEBUG: Requested variant macosx is not provided by port p5-xml-parser.
 DEBUG: Searching for dependency: p5-xml-parser
 DEBUG: Found Dependency: receipt exists for p5-xml-parser
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port poppler.
 DEBUG: Requested variant darwin_9 is not provided by port poppler.
 DEBUG: Requested variant i386 is not provided by port poppler.
 DEBUG: Requested variant x11 is not provided by port poppler.
 DEBUG: Requested variant macosx is not provided by port poppler.
 DEBUG: Searching for dependency: poppler
 DEBUG: Found Dependency: receipt exists for poppler
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port py25-gtk.
 DEBUG: Requested variant i386 is not provided by port py25-gtk.
 DEBUG: Requested variant x11 is not provided by port py25-gtk.
 DEBUG: Requested variant macosx is not provided by port py25-gtk.
 DEBUG: Executing variant darwin_9 provides darwin_9
 DEBUG: Searching for dependency: py25-gtk
 DEBUG: Found Dependency: receipt exists for py25-gtk
 DEBUG: Executing org.macports.main (gimp2)
 --->  Fetching gimp2
 DEBUG: Executing proc-pre-org.macports.fetch-fetch-0
 DEBUG: Executing org.macports.fetch (gimp2)
 --->  Verifying checksum(s) for gimp2
 DEBUG: Executing org.macports.checksum (gimp2)
 --->  Checksumming gimp-2.6.4.tar.bz2
 DEBUG: Correct (md5) checksum for gimp-2.6.4.tar.bz2
 DEBUG: Correct (sha1) checksum for gimp-2.6.4.tar.bz2
 DEBUG: Correct (rmd160) checksum for gimp-2.6.4.tar.bz2
 DEBUG: setting option extract.cmd to /opt/local/bin/bzip2
 --->  Extracting gimp2
 DEBUG: Executing org.macports.extract (gimp2)
 --->  Extracting gimp-2.6.4.tar.bz2
 DEBUG: setting option extract.args to
 /opt/local/var/macports/distfiles/gimp2/gimp-2.6.4.tar.bz2
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work"
 && /opt/local/bin/bzip2 -dc
 /opt/local/var/macports/distfiles/gimp2/gimp-2.6.4.tar.bz2 |
 /usr/bin/gnutar --no-same-owner -xf -'
 DEBUG: Executing org.macports.patch (gimp2)
 --->  Applying patches to gimp2
 --->  Applying
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2/files
 /patch-etc-gimprc.diff
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4"
 && patch -p0'
 patching file etc/gimprc
 DEBUG: Executing proc-post-org.macports.patch-patch-0
 --->  Configuring gimp2
 DEBUG: Using compiler 'Mac OS X gcc 4.0'
 DEBUG: Executing proc-pre-org.macports.configure-configure-0
 DEBUG: Executing org.macports.configure (gimp2)
 DEBUG: Environment: CFLAGS='-O2' CPPFLAGS='-I/opt/local/include'
 CXXFLAGS='-O2' MACOSX_DEPLOYMENT_TARGET='10.5' CPP='/usr/bin/cpp-4.0'
 CXX='/usr/bin/g++-4.0' F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib'
 FCFLAGS='-O2' OBJC='/usr/bin/gcc-4.0' INSTALL='/usr/bin/install -c'
 PYTHON='/opt/local/bin/python2.5' OBJCFLAGS='-O2' FFLAGS='-O2'
 CC='/usr/bin/gcc-4.0'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4"
 && ./configure --prefix=/opt/local --enable-mp --with-pdbgen --with-x
 --without-dbus --without-hal --without-alsa --without-gvfs --without-
 webkit'
 checking for a BSD-compatible install... /usr/bin/install -c
 checking whether build environment is sane... yes
 checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
 checking for gawk... gawk
 checking whether make sets $(MAKE)... yes
 checking for gcc... /usr/bin/gcc-4.0
 checking for C compiler default output file name... a.out
 checking whether the C compiler works... yes
 checking whether we are cross compiling... no
 checking for suffix of executables...
 checking for suffix of object files... o
 checking whether we are using the GNU C compiler... yes
 checking whether /usr/bin/gcc-4.0 accepts -g... yes
 checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
 checking for style of include used by make... GNU
 checking dependency style of /usr/bin/gcc-4.0... gcc3
 checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together...
 yes
 checking build system type... i386-apple-darwin9.6.0
 checking host system type... i386-apple-darwin9.6.0
 checking for a sed that does not truncate output... /usr/bin/sed
 checking for grep that handles long lines and -e... /usr/bin/grep
 checking for egrep... /usr/bin/grep -E
 checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-
 darwin9/4.0.1/ld
 checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is
 GNU ld... no
 checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload
 object files... -r
 checking for BSD-compatible nm... /usr/bin/nm -p
 checking whether ln -s works... yes
 checking how to recognize dependent libraries... pass_all
 checking how to run the C preprocessor... /usr/bin/cpp-4.0
 checking for ANSI C header files... yes
 checking for sys/types.h... yes
 checking for sys/stat.h... yes
 checking for stdlib.h... yes
 checking for string.h... yes
 checking for memory.h... yes
 checking for strings.h... yes
 checking for inttypes.h... yes
 checking for stdint.h... yes
 checking for unistd.h... yes
 checking dlfcn.h usability... yes
 checking dlfcn.h presence... yes
 checking for dlfcn.h... yes
 checking whether we are using the GNU C++ compiler... yes
 checking whether /usr/bin/g++-4.0 accepts -g... yes
 checking dependency style of /usr/bin/g++-4.0... gcc3
 checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E
 checking for g77... no
 checking for xlf... no
 checking for f77... no
 checking for frt... no
 checking for pgf77... no
 checking for cf77... no
 checking for fort77... no
 checking for fl32... no
 checking for af77... no
 checking for xlf90... no
 checking for f90... no
 checking for pgf90... no
 checking for pghpf... no
 checking for epcf90... no

 checking for gfortran... no
 checking for g95... no
 checking for xlf95... no
 checking for f95... no
 checking for fort... no
 checking for ifort... no
 checking for ifc... no
 checking for efc... no
 checking for pgf95... no
 checking for lf95... no
 checking for ftn... no
 checking whether we are using the GNU Fortran 77 compiler... no
 checking whether  accepts -g... no
 checking the maximum length of command line arguments... 196608
 checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0
 object... ok
 checking for objdir... .libs
 checking for ar... ar
 checking for ranlib... ranlib
 checking for strip... strip
 checking for dsymutil... dsymutil
 checking for nmedit... nmedit
 checking for -single_module linker flag... yes
 checking for -exported_symbols_list linker flag... yes
 checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
 checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common
 checking if /usr/bin/gcc-4.0 PIC flag -fno-common works... yes
 checking if /usr/bin/gcc-4.0 static flag -static works... no
 checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
 checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple-
 darwin9/4.0.1/ld) supports shared libraries... yes
 checking dynamic linker characteristics... darwin9.6.0 dyld
 checking how to hardcode library paths into programs... immediate
 checking whether stripping libraries is possible... yes
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... no
 configure: creating libtool
 appending configuration tag "CXX" to libtool
 checking for ld used by /usr/bin/g++-4.0... /usr/libexec/gcc/i686-apple-
 darwin9/4.0.1/ld
 checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is
 GNU ld... no
 checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple-
 darwin9/4.0.1/ld) supports shared libraries... yes
 checking for /usr/bin/g++-4.0 option to produce PIC... -fno-common
 checking if /usr/bin/g++-4.0 PIC flag -fno-common works... yes
 checking if /usr/bin/g++-4.0 static flag -static works... no
 checking if /usr/bin/g++-4.0 supports -c -o file.o... yes
 checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple-
 darwin9/4.0.1/ld) supports shared libraries... yes
 checking dynamic linker characteristics... darwin9.6.0 dyld
 (cached) (cached) checking how to hardcode library paths into programs...
 immediate
 appending configuration tag "F77" to libtool
 checking dependency style of /usr/bin/gcc-4.0... gcc3
 checking whether to enable maintainer-specific portions of Makefiles... no
 checking for pkg-config... /opt/local/bin/pkg-config
 checking pkg-config is at least version 0.16... yes
 checking for target architecture... i386-apple-darwin9.6.0
 checking for some Win32 platform... no
 checking for native Win32... no
 checking for library containing strerror... none required
 checking for a BSD-compatible install... /usr/bin/install -c
 checking whether make sets $(MAKE)... (cached) yes
 checking for special C compiler options needed for large files... no
 checking for _FILE_OFFSET_BITS value needed for large files... no
 checking whether to turn on debugging... no
 checking whether to turn on profiling... no
 checking whether /usr/bin/gcc-4.0 understands -Wdeclaration-after-
 statement... yes
 checking whether /usr/bin/gcc-4.0 understands -Wmissing-prototypes... yes
 checking whether /usr/bin/gcc-4.0 understands -Wmissing-declarations...
 yes
 checking whether /usr/bin/gcc-4.0 understands -Winit-self... yes
 checking whether /usr/bin/gcc-4.0 understands -Wpointer-arith... yes
 checking whether /usr/bin/gcc-4.0 understands -Wold-style-definition...
 yes
 checking for ANSI C header files... (cached) yes
 checking for sys/wait.h that is POSIX.1 compatible... yes
 checking whether time.h and sys/time.h may both be included... yes
 checking sys/param.h usability... yes
 checking sys/param.h presence... yes
 checking for sys/param.h... yes
 checking sys/time.h usability... yes
 checking sys/time.h presence... yes
 checking for sys/time.h... yes
 checking sys/times.h usability... yes
 checking sys/times.h presence... yes
 checking for sys/times.h... yes
 checking for sys/wait.h... (cached) yes
 checking for unistd.h... (cached) yes
 checking for pid_t... yes
 checking return type of signal handlers... void
 checking for vprintf... yes
 checking for _doprnt... no
 checking for working alloca.h... yes
 checking for alloca... yes
 checking for difftime... yes
 checking for mmap... yes
 checking whether binary relocation support should be enabled... no
 checking for _NL_MEASUREMENT_MEASUREMENT... no
 checking whether NLS is requested... yes
 checking for intltool >= 0.35.5... 0.40.5 found
 checking for intltool-update... /opt/local/bin/intltool-update
 checking for intltool-merge... /opt/local/bin/intltool-merge
 checking for intltool-extract... /opt/local/bin/intltool-extract
 checking for xgettext... /opt/local/bin/xgettext
 checking for msgmerge... /opt/local/bin/msgmerge
 checking for msgfmt... /opt/local/bin/msgfmt
 checking for gmsgfmt... /opt/local/bin/msgfmt
 checking for perl... /opt/local/bin/perl
 checking for XML::Parser... configure: error: XML::Parser perl module is
 required for intltool
 Error: Target org.macports.configure returned: configure failure: shell
 command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.4"
 && ./configure --prefix=/opt/local --enable-mp --with-pdbgen --with-x
 --without-dbus --without-hal --without-alsa --without-gvfs --without-
 webkit " returned error 1
 Command output: checking for sys/param.h... yes
 checking sys/time.h usability... yes
 checking sys/time.h presence... yes
 checking for sys/time.h... yes
 checking sys/times.h usability... yes
 checking sys/times.h presence... yes
 checking for sys/times.h... yes
 checking for sys/wait.h... (cached) yes
 checking for unistd.h... (cached) yes
 checking for pid_t... yes
 checking return type of signal handlers... void
 checking for vprintf... yes
 checking for _doprnt... no
 checking for working alloca.h... yes
 checking for alloca... yes
 checking for difftime... yes
 checking for mmap... yes
 checking whether binary relocation support should be enabled... no
 checking for _NL_MEASUREMENT_MEASUREMENT... no
 checking whether NLS is requested... yes
 checking for intltool >= 0.35.5... 0.40.5 found
 checking for intltool-update... /opt/local/bin/intltool-update
 checking for intltool-merge... /opt/local/bin/intltool-merge
 checking for intltool-extract... /opt/local/bin/intltool-extract
 checking for xgettext... /opt/local/bin/xgettext
 checking for msgmerge... /opt/local/bin/msgmerge
 checking for msgfmt... /opt/local/bin/msgfmt
 checking for gmsgfmt... /opt/local/bin/msgfmt
 checking for perl... /opt/local/bin/perl
 checking for XML::Parser... configure: error: XML::Parser perl module is
 required for intltool

 Warning: the following items did not execute (for gimp2):
 org.macports.destroot org.macports.configure org.macports.build
 DEBUG: invalid command name "::ui_init"
     while executing
 "::ui_init $priority $prefix $channels $message"
     ("uplevel" body line 2)
     invoked from within
 "uplevel 1 $body"
 Error: Unable to upgrade port: 1
 }}}

--

Comment:

 Based on these results, its likely that any other p5-* ports that were
 installed before the upgrade to 5.8.9
 will need the same treatment to be visible.

 Since it looks fairly certain that this is an upgrade problem with perl5.8
 am reassigning this ticket to that ports
 maintainer.

-- 
Ticket URL: <http://trac.macports.org/ticket/17884#comment:7>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list