[MacPorts] #19464: smartmontools: uses StartupItems which is deprecated
MacPorts
noreply at macports.org
Sat Jul 25 20:17:01 PDT 2009
#19464: smartmontools: uses StartupItems which is deprecated
---------------------------------+------------------------------------------
Reporter: cilly@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.7.1
Keywords: | Port: smartmontools
---------------------------------+------------------------------------------
Comment(by fluffyarmada@…):
I'd also like to mention, that besides the issue of using a deprecated
method to start the daemon, I'm also having issues caused by the daemon
once it actually starts.
Not sure if I should open a separate bug or not. But it looks like smartd
is trying to run *often* and failing... here's the output from smartctl -a
/dev/disk0 and the output from Console.app...
{{{
fluffbook:~ root# smartctl -a /dev/disk0
smartctl version 5.38 [i386-apple-darwin9.7.0] Copyright (C) 2002-8 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST9500325AS
Serial Number: 5VE0PAXB
Firmware Version: 0001SDM1
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Jul 25 22:12:04 2009 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has
ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon
new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 139) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always
- 138182619
3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 257
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail Always
- 11919135
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 741
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always
- 372
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Unknown_Attribute 0x0032 100 099 000 Old_age Always
- 78
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 063 057 045 Old_age Always
- 37 (Lifetime Min/Max 33/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 18
193 Load_Cycle_Count 0x0032 074 074 000 Old_age Always
- 53902
194 Temperature_Celsius 0x0022 037 043 000 Old_age Always
- 37 (0 19 0 0)
195 Hardware_ECC_Recovered 0x001a 048 036 000 Old_age Always
- 138182619
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
254 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 738
-
# 2 Short offline Aborted by host 90% 713
-
# 3 Short offline Aborted by host 90% 712
-
# 4 Short offline Aborted by host 90% 705
-
# 5 Short offline Aborted by host 90% 705
-
# 6 Short offline Aborted by host 90% 693
-
# 7 Short offline Aborted by host 90% 693
-
# 8 Short offline Aborted by host 90% 693
-
# 9 Short offline Aborted by host 90% 660
-
#10 Short offline Aborted by host 90% 629
-
#11 Short offline Aborted by host 90% 627
-
#12 Short offline Aborted by host 90% 624
-
#13 Short offline Aborted by host 90% 624
-
#14 Short offline Aborted by host 90% 621
-
#15 Short offline Aborted by host 90% 618
-
#16 Short offline Aborted by host 90% 613
-
#17 Short offline Aborted by host 90% 612
-
#18 Short offline Aborted by host 90% 612
-
#19 Short offline Aborted by host 90% 611
-
#20 Short offline Aborted by host 90% 605
-
#21 Short offline Aborted by host 90% 604
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
}}}
The above output makes me think smartd might be trying to do something...
but failing. :( [ the latest test was one I ran manually to make sure
smart was working properly ]
Also, I've been having issues with iTunes, Safari, and friends all
freezing up for about 30 seconds or so... and whenever that happens I
*always* get the following output in Console.app
{{{
7/25/09 7:24:28 PM smartd[229] Device:
IOService:/AppleACPIPlatformExpert/PCI0 at 0/AppleACPIPCI/SATA at B/AppleMCP79AHCI/PRT0 at 0/IOAHCIDevice at 0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice,
failed to read SMART Attribute Data
}}}
These problems completely stopped once I moved the SMART folder out of my
/Library/StartupItems/.
--
Ticket URL: <http://trac.macports.org/ticket/19464#comment:6>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list