[MacPorts] #19183: atk fails to build because of broken GLIB

[MacPorts]

#19183: atk fails to build because of broken GLIB
-----------------------------------+----------------------------------------
  Reporter:  martijn@…             |       Owner:  ryandesign@…           
      Type:  defect                |      Status:  closed                 
  Priority:  Normal                |   Milestone:                         
 Component:  ports                 |     Version:  1.7.1                  
Resolution:  fixed                 |    Keywords:                         
      Port:  glib2                 |  
-----------------------------------+----------------------------------------
Changes (by ryandesign@…):

  * status:  new => closed
  * resolution:  => fixed


Old description:

> I am unable to install py25-gtk due to a broken GLIB. Cleaning up and
> even a complete fresh install of MacPorts did not cure it.
>
> {{{
>  sudo port install py25-gtk
> --->  Configuring atkError: Target org.macports.configure returned:
> configure failure: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/work/atk-1.24.0"
> && ./configure --prefix=/opt/local " returned error 1
> Command output: checking if /usr/bin/gcc-4.0 static flag -static works...
> no
> checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
> checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
> checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/powerpc-
> apple-darwin9/4.0.1/ld) supports shared libraries... yes
> checking dynamic linker characteristics... darwin9.6.0 dyld
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking for some Win32 platform... no
> checking for native Win32 platform... no
> checking for aclocal flags...
> checking for pkg-config... /opt/local/bin/pkg-config
> checking pkg-config is at least version 0.16... yes
> checking for GLIB - version >= 2.5.7... no
> *** Could not run GLIB test program, checking why...
> *** The test program failed to compile or link. See the file config.log
> for the
> *** exact error that occured. This usually means GLIB is incorrectly
> installed.
> checking for pkg-config... (cached) /opt/local/bin/pkg-config
> checking pkg-config is at least version 0.16... yes
> checking for GLIB - version >= 2.0.0... no
> *** Could not run GLIB test program, checking why...
> *** The test program failed to compile or link. See the file config.log
> for the
> *** exact error that occured. This usually means GLIB is incorrectly
> installed.
> configure: error:
> *** GLIB 2.0.0 or better is required. The latest version of
> *** GLIB is always available from ftp://ftp.gtk.org/. If GLIB is
> installed
> *** but not in the same location as pkg-config add the location of the
> file
> *** glib-2.0.pc to the environment variable PKG_CONFIG_PATH.
> }}}

New description:

 I am unable to install py25-gtk due to a broken GLIB. Cleaning up and even
 a complete fresh install of MacPorts did not cure it.

 {{{
  sudo port install py25-gtk
 --->  Configuring atk
 Error: Target org.macports.configure returned: configure failure: shell
 command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_atk/work/atk-1.24.0"
 && ./configure --prefix=/opt/local " returned error 1
 Command output: checking if /usr/bin/gcc-4.0 static flag -static works...
 no
 checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
 checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
 checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/powerpc-
 apple-darwin9/4.0.1/ld) supports shared libraries... yes
 checking dynamic linker characteristics... darwin9.6.0 dyld
 checking how to hardcode library paths into programs... immediate
 checking whether stripping libraries is possible... yes
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... no
 checking for some Win32 platform... no
 checking for native Win32 platform... no
 checking for aclocal flags...
 checking for pkg-config... /opt/local/bin/pkg-config
 checking pkg-config is at least version 0.16... yes
 checking for GLIB - version >= 2.5.7... no
 *** Could not run GLIB test program, checking why...
 *** The test program failed to compile or link. See the file config.log
 for the
 *** exact error that occured. This usually means GLIB is incorrectly
 installed.
 checking for pkg-config... (cached) /opt/local/bin/pkg-config
 checking pkg-config is at least version 0.16... yes
 checking for GLIB - version >= 2.0.0... no
 *** Could not run GLIB test program, checking why...
 *** The test program failed to compile or link. See the file config.log
 for the
 *** exact error that occured. This usually means GLIB is incorrectly
 installed.
 configure: error:
 *** GLIB 2.0.0 or better is required. The latest version of
 *** GLIB is always available from ftp://ftp.gtk.org/. If GLIB is installed
 *** but not in the same location as pkg-config add the location of the
 file
 *** glib-2.0.pc to the environment variable PKG_CONFIG_PATH.
 }}}

--

Comment:

 You will need to sync, upgrade glib2 to 2.20.1_1, then clean out any
 previous attempts to build any of the failing ports (such as atk and gtk-
 doc) before this will work. So:

 {{{
 sudo port sync
 sudo port upgrade glib2
 sudo port clean atk gtk-doc
 }}}

 Then try again.

-- 
Ticket URL: <http://trac.macports.org/ticket/19183#comment:20>
MacPorts <http://www.macports.org/>
Ports system for Mac OS