[MacPorts] #22523: Xft2 won't build

MacPorts noreply at macports.org
Fri Nov 13 13:36:09 PST 2009


#22523: Xft2 won't build
-------------------------------+--------------------------------------------
 Reporter:  jmerkow@…          |       Owner:  jeremyhu@…           
     Type:  defect             |      Status:  new                  
 Priority:  Normal             |   Milestone:                       
Component:  ports              |     Version:  1.8.1                
 Keywords:                     |        Port:  Xft2                 
-------------------------------+--------------------------------------------

Comment(by jmerkow@…):

 {{{
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port Xft2.

 DEBUG: Requested variant i386 is not provided by port Xft2.

 DEBUG: Requested variant macosx is not provided by port Xft2.

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: zlib 1.2.3_3 exists in the ports tree

 DEBUG: zlib 1.2.3_3 +universal is the latest installed

 DEBUG: zlib 1.2.3_3 +universal is active

 DEBUG: Merging existing variants universal into variants

 DEBUG: new fully merged portvariants: universal +

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port zlib.

 DEBUG: Requested variant i386 is not provided by port zlib.

 DEBUG: Requested variant macosx is not provided by port zlib.

 DEBUG: Executing variant universal provides universal

 DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xrender 0.9.5_0 exists in the ports tree

 DEBUG: xrender 0.9.5_0  is the latest installed

 DEBUG: xrender 0.9.5_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port xrender.

 DEBUG: Requested variant i386 is not provided by port xrender.

 DEBUG: Requested variant macosx is not provided by port xrender.

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: pkgconfig 0.23_1 exists in the ports tree

 DEBUG: pkgconfig 0.23_1  is the latest installed

 DEBUG: pkgconfig 0.23_1  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port pkgconfig.

 DEBUG: Requested variant i386 is not provided by port pkgconfig.

 DEBUG: Requested variant macosx is not provided by port pkgconfig.

 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree

 DEBUG: xorg-xproto 7.0.16_0  is the latest installed

 DEBUG: xorg-xproto 7.0.16_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-xproto.

 DEBUG: Requested variant i386 is not provided by port xorg-xproto.

 DEBUG: Requested variant macosx is not provided by port xorg-xproto.

 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-renderproto

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree

 DEBUG: xorg-renderproto 0.11_0  is the latest installed

 DEBUG: xorg-renderproto 0.11_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-renderproto.

 DEBUG: Requested variant i386 is not provided by port xorg-renderproto.

 DEBUG: Requested variant macosx is not provided by port xorg-renderproto.

 DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
 0.11_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-libX11 1.3.2_0 exists in the ports tree

 DEBUG: xorg-libX11 1.3.2_0  is the latest installed

 DEBUG: xorg-libX11 1.3.2_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port xorg-libX11.

 DEBUG: Requested variant i386 is not provided by port xorg-libX11.

 DEBUG: Requested variant macosx is not provided by port xorg-libX11.

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-util-macros 1.3.0_0 exists in the ports tree

 DEBUG: xorg-util-macros 1.3.0_0  is the latest installed

 DEBUG: xorg-util-macros 1.3.0_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.

 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.

 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.

 DEBUG: No need to upgrade! xorg-util-macros 1.3.0_0 >= xorg-util-macros
 1.3.0_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree

 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed

 DEBUG: xorg-xtrans 1.2.5_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.

 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.

 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.

 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree

 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed

 DEBUG: xorg-bigreqsproto 1.1.0_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.

 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.

 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.

 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree

 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed

 DEBUG: xorg-xcmiscproto 1.2.0_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.

 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.

 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.

 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree

 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed

 DEBUG: xorg-xextproto 7.1.1_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.

 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.

 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.

 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree

 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed

 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.

 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.

 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.

 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree

 DEBUG: xorg-inputproto 2.0_0  is the latest installed

 DEBUG: xorg-inputproto 2.0_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.

 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.

 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.

 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree

 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed

 DEBUG: xorg-kbproto 1.0.4_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant

 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.

 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.

 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.

 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: groff 1.20.1_1 exists in the ports tree

 DEBUG: groff 1.20.1_1  is the latest installed

 DEBUG: groff 1.20.1_1  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port groff.

 DEBUG: Requested variant i386 is not provided by port groff.

 DEBUG: Requested variant macosx is not provided by port groff.

 DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree

 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed

 DEBUG: xorg-libXdmcp 1.0.3_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.

 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.

 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.

 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree

 DEBUG: xorg-libXau 1.0.5_0  is the latest installed

 DEBUG: xorg-libXau 1.0.5_0  is active

 DEBUG: Merging existing variants  into variants

 DEBUG: new fully merged portvariants:

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port xorg-libXau.

 DEBUG: Requested variant i386 is not provided by port xorg-libXau.

 DEBUG: Requested variant macosx is not provided by port xorg-libXau.

 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0

 DEBUG: No need to upgrade! xorg-libX11 1.3.2_0 >= xorg-libX11 1.3.2_0

 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: freetype 2.3.9_1 exists in the ports tree

 DEBUG: freetype 2.3.9_1 +macosx+universal is the latest installed

 DEBUG: freetype 2.3.9_1 +macosx+universal is active

 DEBUG: Merging existing variants macosx universal into variants

 DEBUG: new fully merged portvariants: universal +

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl

 DEBUG: universal variant already exists, so not adding the default one

 DEBUG: Requested variant darwin is not provided by port freetype.

 DEBUG: Requested variant i386 is not provided by port freetype.

 DEBUG: Executing variant universal provides universal

 DEBUG: Executing variant macosx provides macosx

 DEBUG: No need to upgrade! freetype 2.3.9_1 >= freetype 2.3.9_1

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: fontconfig 2.7.3_0 exists in the ports tree

 DEBUG: fontconfig 2.7.3_0 +macosx+universal is the latest installed

 DEBUG: fontconfig 2.7.3_0 +macosx+universal is active

 DEBUG: Merging existing variants macosx universal into variants

 DEBUG: new fully merged portvariants: universal +

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl

 DEBUG: universal variant already exists, so not adding the default one

 DEBUG: Requested variant darwin is not provided by port fontconfig.

 DEBUG: Requested variant i386 is not provided by port fontconfig.

 DEBUG: Executing variant universal provides universal

 DEBUG: Executing variant macosx provides macosx

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: libiconv 1.13_0 exists in the ports tree

 DEBUG: libiconv 1.13_0 +universal is the latest installed

 DEBUG: libiconv 1.13_0 +universal is active

 DEBUG: Merging existing variants universal into variants

 DEBUG: new fully merged portvariants: universal +

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: universal variant already exists, so not adding the default one

 DEBUG: Requested variant darwin is not provided by port libiconv.

 DEBUG: Requested variant i386 is not provided by port libiconv.

 DEBUG: Requested variant macosx is not provided by port libiconv.

 DEBUG: Executing variant universal provides universal

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: gperf 3.0.4_0 exists in the ports tree

 DEBUG: gperf 3.0.4_0 +universal is the latest installed

 DEBUG: gperf 3.0.4_0 +universal is active

 DEBUG: Merging existing variants universal into variants

 DEBUG: new fully merged portvariants: universal +

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: universal variant already exists, so not adding the default one

 DEBUG: Requested variant darwin is not provided by port gperf.

 DEBUG: Requested variant i386 is not provided by port gperf.

 DEBUG: Requested variant macosx is not provided by port gperf.

 DEBUG: Executing variant universal provides universal

 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0

 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat

 DEBUG: epoch: in tree: 0 installed: 0

 DEBUG: expat 2.0.1_0 exists in the ports tree

 DEBUG: expat 2.0.1_0 +universal is the latest installed

 DEBUG: expat 2.0.1_0 +universal is active

 DEBUG: Merging existing variants universal into variants

 DEBUG: new fully merged portvariants: universal +

 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat

 DEBUG: OS Platform: darwin

 DEBUG: OS Version: 10.0.0

 DEBUG: Mac OS X Version: 10.6

 DEBUG: System Arch: i386

 DEBUG: setting option os.universal_supported to yes

 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided

 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided

 DEBUG: adding the default universal variant

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf

 DEBUG: Requested variant darwin is not provided by port expat.

 DEBUG: Requested variant i386 is not provided by port expat.

 DEBUG: Requested variant macosx is not provided by port expat.

 DEBUG: Executing variant universal provides universal

 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0

 DEBUG: No need to upgrade! fontconfig 2.7.3_0 >= fontconfig 2.7.3_0

 --->  Computing dependencies for Xft2

 DEBUG: Searching for dependency: zlib

 DEBUG: Found Dependency: receipt exists for zlib

 DEBUG: Searching for dependency: xrender

 DEBUG: Found Dependency: receipt exists for xrender

 DEBUG: Searching for dependency: freetype

 DEBUG: Found Dependency: receipt exists for freetype

 DEBUG: Searching for dependency: fontconfig

 DEBUG: Found Dependency: receipt exists for fontconfig

 DEBUG: Searching for dependency: expat

 DEBUG: Found Dependency: receipt exists for expat

 DEBUG: Searching for dependency: pkgconfig

 DEBUG: Found Dependency: receipt exists for pkgconfig

 DEBUG: Executing org.macports.main (Xft2)

 DEBUG: Skipping completed org.macports.fetch (Xft2)

 DEBUG: Skipping completed org.macports.checksum (Xft2)

 DEBUG: setting option extract.cmd to /usr/bin/bzip2

 DEBUG: Skipping completed org.macports.extract (Xft2)

 DEBUG: Skipping completed org.macports.patch (Xft2)

 DEBUG: Skipping completed org.macports.configure (Xft2)

 --->  Building Xft2

 DEBUG: Executing org.macports.build (Xft2)

 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'

 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_Xft2/work/libXft-2.1.14"
 && /usr/bin/make -j2 all'

 /usr/bin/make  all-recursive

 Making all in man

 make[2]: Nothing to be done for `all'.

 Making all in src

   CCLD   libXft.la

 ld: warning: in /opt/local/lib/libXrender.dylib, file is not of required
 architecture

 ld: warning: in /opt/local/lib/libX11.dylib, file is not of required
 architecture

 ld: warning: in /opt/local/lib/libXau.dylib, file is not of required
 architecture

 ld: warning: in /opt/local/lib/libXdmcp.dylib, file is not of required
 architecture

 Undefined symbols:

   "_XRenderFillRectangle", referenced from:

       _XftDrawSrcPicture in xftdraw.o

       _XftDrawRect in xftdraw.o

   "_XCreateRegion", referenced from:

       _XftDrawSetClip in xftdraw.o

   "_XRenderFreeGlyphs", referenced from:

       _XftFontUnloadGlyphs in xftglyphs.o

       _XftFontUnloadGlyphs in xftglyphs.o

   "_XGetImage", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       _XftGlyphCore in xftcore.o

   "_XRenderFindFormat", referenced from:

       __XftDisplayInfoGet in xftdpy.o

       __XftDrawRenderPrepare in xftdraw.o

   "_XFillRectangle", referenced from:

       __XftSharpGlyphRgba in xftcore.o

       __XftSharpGlyphRgba in xftcore.o

       __XftSharpGlyphGray in xftcore.o

       __XftSharpGlyphGray in xftcore.o

       __XftSharpGlyphMono in xftcore.o

       __XftSharpGlyphMono in xftcore.o

       _XftRectCore in xftcore.o

       _XftDrawRect in xftdraw.o

   "_XRenderFindVisualFormat", referenced from:

       __XftDisplayInfoGet in xftdpy.o

       __XftDisplayInfoGet in xftdpy.o

       __XftDrawRenderPrepare in xftdraw.o

   "_XRenderFreeGlyphSet", referenced from:

       _XftFontDestroy in xftfreetype.o

       __XftFontUncacheGlyph in xftglyphs.o

   "_XRenderSetPictureClipRectangles", referenced from:

       __XftDrawRenderPrepare in xftdraw.o

       _XftDrawSetClipRectangles in xftdraw.o

   "_XPutImage", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

   "_XRenderCompositeString16", referenced from:

       _XftGlyphRender in xftrender.o

   "_XSetClipRectangles", referenced from:

       __XftDrawCorePrepare in xftdraw.o

       _XftDrawSetClipRectangles in xftdraw.o

   "_XRenderCompositeString32", referenced from:

       _XftGlyphRender in xftrender.o

   "_XCopyArea", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

   "_XFreeColors", referenced from:

       _XftColorFree in xftcolor.o

   "_XRenderCompositeText8", referenced from:

       _XftGlyphSpecRender in xftrender.o

       _XftGlyphFontSpecRender in xftrender.o

   "_XRenderAddGlyphs", referenced from:

       _XftFontLoadGlyphs in xftglyphs.o

   "_XSetRegion", referenced from:

       _XftDrawSetClip in xftdraw.o

       __XftDrawCorePrepare in xftdraw.o

   "_XGetDefault", referenced from:

       __XftDefaultInitDouble in xftdpy.o

       __XftDefaultInitInteger in xftdpy.o

       __XftDefaultInitBool in xftdpy.o

   "_XSetClipMask", referenced from:

       _XftDrawSetClip in xftdraw.o

   "_XRenderQueryVersion", referenced from:

       __XftDisplayInfoGet in xftdpy.o

   "_XRenderCreateGlyphSet", referenced from:

       _XftFontLoadGlyphs in xftglyphs.o

       _XftFontLoadGlyphs in xftglyphs.o

   "_XAllocColor", referenced from:

       _XftColorAllocValue in xftcolor.o

   "_XRenderQuerySubpixelOrder", referenced from:

       _XftDefaultSubstitute in xftdpy.o

   "_XRenderChangePicture", referenced from:

       _XftDrawSetSubwindowMode in xftdraw.o

       _XftDrawSetClip in xftdraw.o

   "_XEqualRegion", referenced from:

       _XftDrawSetClip in xftdraw.o

   "_XAddExtension", referenced from:

       __XftDisplayInfoGet in xftdpy.o

   "_XGetVisualInfo", referenced from:

       __XftDrawScreen in xftdraw.o

   "_XSetErrorHandler", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       _XftGlyphCore in xftcore.o

   "_XFreeGC", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       _XftDrawChange in xftdraw.o

       _XftDrawDestroy in xftdraw.o

   "_XFreePixmap", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       _XftDrawSrcPicture in xftdraw.o

   "_XRenderCompositeString8", referenced from:

       _XftGlyphRender in xftrender.o

   "_XSetSubwindowMode", referenced from:

       _XftDrawSetSubwindowMode in xftdraw.o

   "_XGetGeometry", referenced from:

       _XftDrawDepth in xftdraw.o

       __XftDrawScreen in xftdraw.o

   "_XListPixmapFormats", referenced from:

       _XftDrawBitsPerPixel in xftdraw.o

   "_XRenderCompositeText16", referenced from:

       _XftGlyphSpecRender in xftrender.o

       _XftGlyphFontSpecRender in xftrender.o

   "_XRenderFreePicture", referenced from:

       _XftDrawSrcPicture in xftdraw.o

       _XftDrawChange in xftdraw.o

       _XftDrawDestroy in xftdraw.o

   "_XUnionRegion", referenced from:

       _XftDrawSetClip in xftdraw.o

   "_XRenderCompositeText32", referenced from:

       _XftGlyphSpecRender in xftrender.o

       _XftGlyphFontSpecRender in xftrender.o

   "_XDestroyRegion", referenced from:

       _XftDrawSetClip in xftdraw.o

       _XftDrawSetClip in xftdraw.o

       _XftDrawDestroy in xftdraw.o

       _XftDrawSetClipRectangles in xftdraw.o

   "_XRenderCreatePicture", referenced from:

       _XftDrawSrcPicture in xftdraw.o

       __XftDrawRenderPrepare in xftdraw.o

   "_XRenderSetPictureClipRegion", referenced from:

       _XftDrawSetClip in xftdraw.o

       __XftDrawRenderPrepare in xftdraw.o

   "_XSetForeground", referenced from:

       _XftRectCore in xftcore.o

       __XftDrawCorePrepare in xftdraw.o

       _XftDrawRect in xftdraw.o

   "_XESetCloseDisplay", referenced from:

       __XftDisplayInfoGet in xftdpy.o

   "_XRenderQueryExtension", referenced from:

       __XftDisplayInfoGet in xftdpy.o

   "_XFree", referenced from:

       __XftDrawScreen in xftdraw.o

       _XftDrawBitsPerPixel in xftdraw.o

   "_XRenderFindStandardFormat", referenced from:

       _XftFontOpenInfo in xftfreetype.o

       _XftFontOpenInfo in xftfreetype.o

       _XftFontOpenInfo in xftfreetype.o

       _XftGlyphFontSpecRender in xftrender.o

   "_XCreatePixmap", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       _XftDrawSrcPicture in xftdraw.o

   "_XAllocNamedColor", referenced from:

       _XftColorAllocName in xftcolor.o

   "_XCreateGC", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       __XftDrawCorePrepare in xftdraw.o

 ld: symbol(s) not found

 collect2: ld returned 1 exit status

 lipo: can't open input file: /var/tmp//ccI8SazA.out (No such file or
 directory)

 make[2]: *** [libXft.la] Error 1

 make[1]: *** [all-recursive] Error 1

 make: *** [all] Error 2

 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_Xft2/work/libXft-2.1.14"
 && /usr/bin/make -j2 all " returned error 2

 Command output:   "_XESetCloseDisplay", referenced from:

       __XftDisplayInfoGet in xftdpy.o

   "_XRenderQueryExtension", referenced from:

       __XftDisplayInfoGet in xftdpy.o

   "_XFree", referenced from:

       __XftDrawScreen in xftdraw.o

       _XftDrawBitsPerPixel in xftdraw.o

   "_XRenderFindStandardFormat", referenced from:

       _XftFontOpenInfo in xftfreetype.o

       _XftFontOpenInfo in xftfreetype.o

       _XftFontOpenInfo in xftfreetype.o

       _XftGlyphFontSpecRender in xftrender.o

   "_XCreatePixmap", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       _XftDrawSrcPicture in xftdraw.o

   "_XAllocNamedColor", referenced from:

       _XftColorAllocName in xftcolor.o

   "_XCreateGC", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       __XftDrawCorePrepare in xftdraw.o

 ld: symbol(s) not found

 collect2: ld returned 1 exit status

 lipo: can't open input file: /var/tmp//ccI8SazA.out (No such file or
 directory)

 make[2]: *** [libXft.la] Error 1

 make[1]: *** [all-recursive] Error 1

 make: *** [all] Error 2



 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_Xft2/work/libXft-2.1.14"
 && /usr/bin/make -j2 all " returned error 2

 Command output:   "_XESetCloseDisplay", referenced from:

       __XftDisplayInfoGet in xftdpy.o

   "_XRenderQueryExtension", referenced from:

       __XftDisplayInfoGet in xftdpy.o

   "_XFree", referenced from:

       __XftDrawScreen in xftdraw.o

       _XftDrawBitsPerPixel in xftdraw.o

   "_XRenderFindStandardFormat", referenced from:

       _XftFontOpenInfo in xftfreetype.o

       _XftFontOpenInfo in xftfreetype.o

       _XftFontOpenInfo in xftfreetype.o

       _XftGlyphFontSpecRender in xftrender.o

   "_XCreatePixmap", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       _XftDrawSrcPicture in xftdraw.o

   "_XAllocNamedColor", referenced from:

       _XftColorAllocName in xftcolor.o

   "_XCreateGC", referenced from:

       _XftGlyphFontSpecCore in xftcore.o

       _XftGlyphSpecCore in xftcore.o

       _XftGlyphCore in xftcore.o

       __XftDrawCorePrepare in xftdraw.o

 ld: symbol(s) not found

 collect2: ld returned 1 exit status

 lipo: can't open input file: /var/tmp//ccI8SazA.out (No such file or
 directory)

 make[2]: *** [libXft.la] Error 1

 make[1]: *** [all-recursive] Error 1

 make: *** [all] Error 2



     while executing

 "command_exec build"

     (procedure "portbuild::build_main" line 9)

     invoked from within

 "$procedure $targetname"

 Warning: the following items did not execute (for Xft2):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install

 Error: Status 1 encountered during processing.
 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/22523#comment:6>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list