[MacPorts] #21756: poppler, gd2, gtk - build failure on Snow Leopard, breaks libXdmcp
MacPorts
noreply at macports.org
Fri Oct 2 01:29:51 PDT 2009
#21756: poppler, gd2, gtk - build failure on Snow Leopard, breaks libXdmcp
----------------------------------+-----------------------------------------
Reporter: macwright@… | Owner: macports-tickets@…
Type: defect | Status: closed
Priority: Normal | Milestone:
Component: ports | Version: 1.8.1
Resolution: invalid | Keywords:
Port: |
----------------------------------+-----------------------------------------
Changes (by jmr@…):
* status: new => closed
* resolution: => invalid
Old description:
> Hi, was using gnuplot, tried to install poppler, poppler build failed and
> broke gnuplot. Sordid tale below.
>
> (building poppler)
>
> {{{~/Scratch/pdf % sudo port install poppler
> ---> Computing dependencies for libpixman
> ---> Fetching libpixman
> ---> Attempting to fetch pixman-0.16.0.tar.bz2 from
> http://xorg.freedesktop.org/archive/individual/lib/
> ---> Verifying checksum(s) for libpixman
> ---> Extracting libpixman
> ---> Configuring libpixman
> ---> Building libpixman
> ---> Staging libpixman into destroot
> ---> Deactivating libpixman @0.14.0_0
> ---> Computing dependencies for libpixman
> ---> Installing libpixman @0.16.0_0
> ---> Activating libpixman @0.16.0_0
> ---> Cleaning libpixman
> ---> Computing dependencies for xorg-util-macros
> ---> Fetching xorg-util-macros
> ---> Attempting to fetch util-macros-1.3.0.tar.bz2 from
> http://distfiles.macports.org/xorg-util-macros
> ---> Verifying checksum(s) for xorg-util-macros
> ---> Extracting xorg-util-macros
> ---> Configuring xorg-util-macros
> ---> Building xorg-util-macros
> ---> Staging xorg-util-macros into destroot
> ---> Deactivating xorg-util-macros @1.2.2_0
> ---> Computing dependencies for xorg-util-macros
> ---> Installing xorg-util-macros @1.3.0_0
> ---> Activating xorg-util-macros @1.3.0_0
> ---> Cleaning xorg-util-macros
> Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
> though installed variants "" do not match "+darwin_10". Use 'upgrade
> --enforce-variants' to switch to the requested variants.
> Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
> though installed variants "" do not match "+darwin_10". Use 'upgrade
> --enforce-variants' to switch to the requested variants.
> ---> Computing dependencies for xorg-xproto
> ---> Fetching xorg-xproto
> ---> Attempting to fetch xproto-7.0.16.tar.bz2 from
> http://distfiles.macports.org/xorg-xproto
> ---> Verifying checksum(s) for xorg-xproto
> ---> Extracting xorg-xproto
> ---> Configuring xorg-xproto
> ---> Building xorg-xproto
> ---> Staging xorg-xproto into destroot
> ---> Deactivating xorg-xproto @7.0.15_0
> ---> Computing dependencies for xorg-xproto
> ---> Installing xorg-xproto @7.0.16_0
> ---> Activating xorg-xproto @7.0.16_0
> ---> Cleaning xorg-xproto
> ---> Computing dependencies for xorg-libXdmcp
> ---> Fetching xorg-libXdmcp
> ---> Attempting to fetch libXdmcp-1.0.3.tar.bz2 from
> http://distfiles.macports.org/xorg-libXdmcp
> ---> Verifying checksum(s) for xorg-libXdmcp
> ---> Extracting xorg-libXdmcp
> ---> Configuring xorg-libXdmcp
> ---> Building xorg-libXdmcp
> ---> Staging xorg-libXdmcp into destroot
> ---> Deactivating xorg-libXdmcp @1.0.2_1
> ---> Computing dependencies for xorg-libXdmcp
> ---> Installing xorg-libXdmcp @1.0.3_0
> ---> Activating xorg-libXdmcp @1.0.3_0
> ---> Cleaning xorg-libXdmcp
> ---> Computing dependencies for python_select
> ---> Fetching python_select
> ---> Attempting to fetch select-0.3.tar.gz from
> http://distfiles.macports.org/python_select
> ---> Verifying checksum(s) for python_select
> ---> Extracting python_select
> ---> Configuring python_select
> ---> Building python_select
> ---> Staging python_select into destroot
> ---> Deactivating python_select @0.2.1_0+darwin_9
> ---> Computing dependencies for python_select
> ---> Installing python_select @0.3_0+darwin_10
> ---> Activating python_select @0.3_0+darwin_10
> ---> Cleaning python_select
> ---> Computing dependencies for glib2
> ---> Fetching glib2
> ---> Attempting to fetch glib-2.20.5.tar.bz2 from
> ftp://ftp.gtk.org/pub/glib/2.20/
> ---> Verifying checksum(s) for glib2
> ---> Extracting glib2
> ---> Applying patches to glib2
> ---> Configuring glib2
> Error: Target org.macports.configure returned: configure failure: shell
> command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_glib2/work/glib-2.20.5"
> && ./configure --prefix=/opt/local --enable-static " returned error 1
> Command output: checking dependency style of /usr/bin/gcc-4.2... (cached)
> gcc3
> checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
> checking for c++... /usr/bin/g++-4.2
> checking whether we are using the GNU C++ compiler... yes
> checking whether /usr/bin/g++-4.2 accepts -g... yes
> checking dependency style of /usr/bin/g++-4.2... gcc3
> checking for gcc... (cached) /usr/bin/gcc-4.2
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether /usr/bin/gcc-4.2 accepts -g... (cached) yes
> checking for /usr/bin/gcc-4.2 option to accept ISO C89... (cached) none
> needed
> checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3
> checking whether /usr/bin/gcc-4.2 and cc understand -c and -o together...
> yes
> checking for a BSD-compatible install... /usr/bin/install -c
> checking for special C compiler options needed for large files... no
> checking for _FILE_OFFSET_BITS value needed for large files... no
> checking for pkg-config... /opt/local/bin/pkg-config
> checking for gawk... (cached) gawk
> checking for perl5... /opt/local/bin/perl
> checking for indent... indent
> checking for /opt/local/bin/perl... /opt/local/bin/perl
> checking for a Python interpreter with version >= 2.4... python
> checking for python... /opt/local/bin/python
> checking for python version... 2.6
> checking for python platform... darwin
> checking for python script directory... ${prefix}/lib/python2.6/site-
> packages
> checking for python extension module directory...
> ${exec_prefix}/lib/python2.6/site-packages
> checking for iconv_open... no
> checking for libiconv_open in -liconv... no
> checking for iconv_open in -liconv... no
> configure: error: *** No iconv() implementation found in C library or
> libiconv
>
> Error: Unable to upgrade port: 1
> Error: Unable to execute port: upgrade gtk2 failed}}}
>
> Trying to use gnuplot
>
> {{{~/DS/diagrams % gnuplot ec2_small_cost.plt
> dyld: Library not loaded: /opt/local/lib/libXdmcp.6.dylib
> Referenced from: /opt/local/lib/libgd.2.dylib
> Reason: no suitable image found. Did find:
> /opt/local/lib/libXdmcp.6.dylib: mach-o, but wrong architecture
> zsh: trace trap gnuplot ec2_small_cost.plt}}}
>
> Trying to install gnuplot
>
> {{{~/DS/diagrams % sudo port install gnuplot
> Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
> though installed variants "" do not match "+darwin_10". Use 'upgrade
> --enforce-variants' to switch to the requested variants.
> Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
> though installed variants "" do not match "+darwin_10". Use 'upgrade
> --enforce-variants' to switch to the requested variants.
> ---> Computing dependencies for xpm
> ---> Fetching xpm
> ---> Verifying checksum(s) for xpm
> ---> Extracting xpm
> ---> Configuring xpm
> ---> Building xpm
> Error: Target org.macports.build returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xpm/work/libXpm-3.5.7"
> && /usr/bin/make -j2 all " returned error 2
> Command output: _xpmParseDataAndCreate in create.o
> "_XAllocColor", referenced from:
> _AllocColor in create.o
> "_XDefaultVisual", referenced from:
> _CreateColors in create.o
> _CreateColors in create.o
> _XpmCreateImageFromXpmImage in create.o
> _XpmCreateImageFromXpmImage in create.o
> _xpmParseDataAndCreate in create.o
> _xpmParseDataAndCreate in create.o
> "_XQueryColors", referenced from:
> _SetColor in create.o
> _SetColor in create.o
> _CreateColors in create.o
> _XpmCreateXpmImageFromImage in scan.o
> "_XParseColor", referenced from:
> _AllocColor in create.o
> "_XFreeGC", referenced from:
> _xpmCreatePixmapFromImage in CrPFrI.o
> "_XGetGeometry", referenced from:
> _xpmCreateImageFromPixmap in CrIFrP.o
> "_XCreatePixmap", referenced from:
> _xpmCreatePixmapFromImage in CrPFrI.o
> "_XCreateGC", referenced from:
> _xpmCreatePixmapFromImage in CrPFrI.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make[2]: *** [libXpm.la] Error 1
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
>
> Error: Unable to upgrade port: 1
> Error: Unable to execute port: upgrade gd2 failed}}}
New description:
Hi, was using gnuplot, tried to install poppler, poppler build failed and
broke gnuplot. Sordid tale below.
(building poppler)
{{{
~/Scratch/pdf % sudo port install poppler
---> Computing dependencies for libpixman
---> Fetching libpixman
---> Attempting to fetch pixman-0.16.0.tar.bz2 from
http://xorg.freedesktop.org/archive/individual/lib/
---> Verifying checksum(s) for libpixman
---> Extracting libpixman
---> Configuring libpixman
---> Building libpixman
---> Staging libpixman into destroot
---> Deactivating libpixman @0.14.0_0
---> Computing dependencies for libpixman
---> Installing libpixman @0.16.0_0
---> Activating libpixman @0.16.0_0
---> Cleaning libpixman
---> Computing dependencies for xorg-util-macros
---> Fetching xorg-util-macros
---> Attempting to fetch util-macros-1.3.0.tar.bz2 from
http://distfiles.macports.org/xorg-util-macros
---> Verifying checksum(s) for xorg-util-macros
---> Extracting xorg-util-macros
---> Configuring xorg-util-macros
---> Building xorg-util-macros
---> Staging xorg-util-macros into destroot
---> Deactivating xorg-util-macros @1.2.2_0
---> Computing dependencies for xorg-util-macros
---> Installing xorg-util-macros @1.3.0_0
---> Activating xorg-util-macros @1.3.0_0
---> Cleaning xorg-util-macros
Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
though installed variants "" do not match "+darwin_10". Use 'upgrade
--enforce-variants' to switch to the requested variants.
Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
though installed variants "" do not match "+darwin_10". Use 'upgrade
--enforce-variants' to switch to the requested variants.
---> Computing dependencies for xorg-xproto
---> Fetching xorg-xproto
---> Attempting to fetch xproto-7.0.16.tar.bz2 from
http://distfiles.macports.org/xorg-xproto
---> Verifying checksum(s) for xorg-xproto
---> Extracting xorg-xproto
---> Configuring xorg-xproto
---> Building xorg-xproto
---> Staging xorg-xproto into destroot
---> Deactivating xorg-xproto @7.0.15_0
---> Computing dependencies for xorg-xproto
---> Installing xorg-xproto @7.0.16_0
---> Activating xorg-xproto @7.0.16_0
---> Cleaning xorg-xproto
---> Computing dependencies for xorg-libXdmcp
---> Fetching xorg-libXdmcp
---> Attempting to fetch libXdmcp-1.0.3.tar.bz2 from
http://distfiles.macports.org/xorg-libXdmcp
---> Verifying checksum(s) for xorg-libXdmcp
---> Extracting xorg-libXdmcp
---> Configuring xorg-libXdmcp
---> Building xorg-libXdmcp
---> Staging xorg-libXdmcp into destroot
---> Deactivating xorg-libXdmcp @1.0.2_1
---> Computing dependencies for xorg-libXdmcp
---> Installing xorg-libXdmcp @1.0.3_0
---> Activating xorg-libXdmcp @1.0.3_0
---> Cleaning xorg-libXdmcp
---> Computing dependencies for python_select
---> Fetching python_select
---> Attempting to fetch select-0.3.tar.gz from
http://distfiles.macports.org/python_select
---> Verifying checksum(s) for python_select
---> Extracting python_select
---> Configuring python_select
---> Building python_select
---> Staging python_select into destroot
---> Deactivating python_select @0.2.1_0+darwin_9
---> Computing dependencies for python_select
---> Installing python_select @0.3_0+darwin_10
---> Activating python_select @0.3_0+darwin_10
---> Cleaning python_select
---> Computing dependencies for glib2
---> Fetching glib2
---> Attempting to fetch glib-2.20.5.tar.bz2 from
ftp://ftp.gtk.org/pub/glib/2.20/
---> Verifying checksum(s) for glib2
---> Extracting glib2
---> Applying patches to glib2
---> Configuring glib2
Error: Target org.macports.configure returned: configure failure: shell
command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_glib2/work/glib-2.20.5"
&& ./configure --prefix=/opt/local --enable-static " returned error 1
Command output: checking dependency style of /usr/bin/gcc-4.2... (cached)
gcc3
checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
checking for c++... /usr/bin/g++-4.2
checking whether we are using the GNU C++ compiler... yes
checking whether /usr/bin/g++-4.2 accepts -g... yes
checking dependency style of /usr/bin/g++-4.2... gcc3
checking for gcc... (cached) /usr/bin/gcc-4.2
checking whether we are using the GNU C compiler... (cached) yes
checking whether /usr/bin/gcc-4.2 accepts -g... (cached) yes
checking for /usr/bin/gcc-4.2 option to accept ISO C89... (cached) none
needed
checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3
checking whether /usr/bin/gcc-4.2 and cc understand -c and -o together...
yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for pkg-config... /opt/local/bin/pkg-config
checking for gawk... (cached) gawk
checking for perl5... /opt/local/bin/perl
checking for indent... indent
checking for /opt/local/bin/perl... /opt/local/bin/perl
checking for a Python interpreter with version >= 2.4... python
checking for python... /opt/local/bin/python
checking for python version... 2.6
checking for python platform... darwin
checking for python script directory... ${prefix}/lib/python2.6/site-
packages
checking for python extension module directory...
${exec_prefix}/lib/python2.6/site-packages
checking for iconv_open... no
checking for libiconv_open in -liconv... no
checking for iconv_open in -liconv... no
configure: error: *** No iconv() implementation found in C library or
libiconv
Error: Unable to upgrade port: 1
Error: Unable to execute port: upgrade gtk2 failed
}}}
Trying to use gnuplot
{{{
~/DS/diagrams % gnuplot ec2_small_cost.plt
dyld: Library not loaded: /opt/local/lib/libXdmcp.6.dylib
Referenced from: /opt/local/lib/libgd.2.dylib
Reason: no suitable image found. Did find:
/opt/local/lib/libXdmcp.6.dylib: mach-o, but wrong architecture
zsh: trace trap gnuplot ec2_small_cost.plt
}}}
Trying to install gnuplot
{{{
~/DS/diagrams % sudo port install gnuplot
Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
though installed variants "" do not match "+darwin_10". Use 'upgrade
--enforce-variants' to switch to the requested variants.
Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
though installed variants "" do not match "+darwin_10". Use 'upgrade
--enforce-variants' to switch to the requested variants.
---> Computing dependencies for xpm
---> Fetching xpm
---> Verifying checksum(s) for xpm
---> Extracting xpm
---> Configuring xpm
---> Building xpm
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xpm/work/libXpm-3.5.7"
&& /usr/bin/make -j2 all " returned error 2
Command output: _xpmParseDataAndCreate in create.o
"_XAllocColor", referenced from:
_AllocColor in create.o
"_XDefaultVisual", referenced from:
_CreateColors in create.o
_CreateColors in create.o
_XpmCreateImageFromXpmImage in create.o
_XpmCreateImageFromXpmImage in create.o
_xpmParseDataAndCreate in create.o
_xpmParseDataAndCreate in create.o
"_XQueryColors", referenced from:
_SetColor in create.o
_SetColor in create.o
_CreateColors in create.o
_XpmCreateXpmImageFromImage in scan.o
"_XParseColor", referenced from:
_AllocColor in create.o
"_XFreeGC", referenced from:
_xpmCreatePixmapFromImage in CrPFrI.o
"_XGetGeometry", referenced from:
_xpmCreateImageFromPixmap in CrIFrP.o
"_XCreatePixmap", referenced from:
_xpmCreatePixmapFromImage in CrPFrI.o
"_XCreateGC", referenced from:
_xpmCreatePixmapFromImage in CrPFrI.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[2]: *** [libXpm.la] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Error: Unable to upgrade port: 1
Error: Unable to execute port: upgrade gd2 failed
}}}
--
Comment:
http://trac.macports.org/wiki/FAQ#migration
--
Ticket URL: <http://trac.macports.org/ticket/21756#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list