[MacPorts] #21772: mplayer build error under xcode 3.2
MacPorts
noreply at macports.org
Fri Oct 2 11:45:20 PDT 2009
#21772: mplayer build error under xcode 3.2
-------------------------------+--------------------------------------------
Reporter: chrisg@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.1
Keywords: mplayer xcode 3.2 | Port: mplayer
-------------------------------+--------------------------------------------
Comment(by chrisg@…):
I was unaware of the debug switch for port. Since I found it I made
another build log. Here it is.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/MPlayer
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/MPlayer
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant i386 is not provided by port MPlayer.
DEBUG: Executing variant darwin_i386 provides darwin_i386
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 6b_3 exists in the ports tree
DEBUG: jpeg 6b_3 is the latest installed
DEBUG: jpeg 6b_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port jpeg.
DEBUG: Requested variant i386 is not provided by port jpeg.
DEBUG: Requested variant macosx is not provided by port jpeg.
DEBUG: No need to upgrade! jpeg 6b_3 >= jpeg 6b_3
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lame 3.98.2_1 exists in the ports tree
DEBUG: lame 3.98.2_1 is the latest installed
DEBUG: lame 3.98.2_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port lame.
DEBUG: Requested variant i386 is not provided by port lame.
DEBUG: Requested variant macosx is not provided by port lame.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: No need to upgrade! lame 3.98.2_1 >= lame 3.98.2_1
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0 is the latest installed
DEBUG: libiconv 1.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libmad
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libmad 0.15.1b_2 exists in the ports tree
DEBUG: libmad 0.15.1b_2 is the latest installed
DEBUG: libmad 0.15.1b_2 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libmad
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libmad.
DEBUG: Requested variant i386 is not provided by port libmad.
DEBUG: Requested variant macosx is not provided by port libmad.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1 is the latest installed
DEBUG: pkgconfig 0.23_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6a_0 exists in the ports tree
DEBUG: libtool 2.2.6a_0 is the latest installed
DEBUG: libtool 2.2.6a_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11_0 exists in the ports tree
DEBUG: automake 1.11_0 is the latest installed
DEBUG: automake 1.11_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.64_2 exists in the ports tree
DEBUG: autoconf 2.64_2 is the latest installed
DEBUG: autoconf 2.64_2 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is the latest installed
DEBUG: perl5 5.8.9_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 is the latest installed
DEBUG: perl5.8 5.8.9_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0 is the latest installed
DEBUG: m4 1.4.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1 is the latest installed
DEBUG: help2man 1.36.4_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0 is the latest installed
DEBUG: p5-locale-gettext 1.05_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 is the latest installed
DEBUG: gettext 0.17_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
DEBUG: No need to upgrade! libmad 0.15.1b_2 >= libmad 0.15.1b_2
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libogg 1.1.4_0 exists in the ports tree
DEBUG: libogg 1.1.4_0 is the latest installed
DEBUG: libogg 1.1.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libogg.
DEBUG: Requested variant i386 is not provided by port libogg.
DEBUG: Requested variant macosx is not provided by port libogg.
DEBUG: No need to upgrade! libogg 1.1.4_0 >= libogg 1.1.4_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.2.38_0 exists in the ports tree
DEBUG: libpng 1.2.38_0 is the latest installed
DEBUG: libpng 1.2.38_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libpng.
DEBUG: Requested variant i386 is not provided by port libpng.
DEBUG: Requested variant macosx is not provided by port libpng.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3 is the latest installed
DEBUG: zlib 1.2.3_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: No need to upgrade! libpng 1.2.38_0 >= libpng 1.2.38_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: giflib 4.1.6_1 exists in the ports tree
DEBUG: giflib 4.1.6_1 is the latest installed
DEBUG: giflib 4.1.6_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port giflib.
DEBUG: Requested variant i386 is not provided by port giflib.
DEBUG: Requested variant macosx is not provided by port giflib.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libsm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
DEBUG: xorg-libsm 1.1.1_0 is the latest installed
DEBUG: xorg-libsm 1.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libsm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libsm.
DEBUG: Requested variant i386 is not provided by port xorg-libsm.
DEBUG: Requested variant macosx is not provided by port xorg-libsm.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xtrans
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xtrans 1.2.4_0 exists in the ports tree
DEBUG: xorg-xtrans 1.2.4_0 is the latest installed
DEBUG: xorg-xtrans 1.2.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: No need to upgrade! xorg-xtrans 1.2.4_0 >= xorg-xtrans 1.2.4_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libice
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
DEBUG: xorg-libice 1.0.6_0 is the latest installed
DEBUG: xorg-libice 1.0.6_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libice
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libice.
DEBUG: Requested variant i386 is not provided by port xorg-libice.
DEBUG: Requested variant macosx is not provided by port xorg-libice.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0 is the latest installed
DEBUG: xorg-xproto 7.0.16_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant i386 is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libX11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.2.2_0 exists in the ports tree
DEBUG: xorg-libX11 1.2.2_0 is the latest installed
DEBUG: xorg-libX11 1.2.2_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-util-macros
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-util-macros 1.3.0_0 exists in the ports tree
DEBUG: xorg-util-macros 1.3.0_0 is the latest installed
DEBUG: xorg-util-macros 1.3.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: No need to upgrade! xorg-util-macros 1.3.0_0 >= xorg-util-macros
1.3.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXdmcp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXau
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0 is the latest installed
DEBUG: xorg-libXau 1.0.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant i386 is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-bigreqsproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed
DEBUG: xorg-bigreqsproto 1.1.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
1.1.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xcmiscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed
DEBUG: xorg-xcmiscproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
1.2.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xextproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0 is the latest installed
DEBUG: xorg-xextproto 7.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
7.1.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xf86bigfontproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed
DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-
xf86bigfontproto.
DEBUG: Requested variant i386 is not provided by port xorg-
xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-
xf86bigfontproto.
DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
xf86bigfontproto 1.2.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-inputproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 1.5.1_0 exists in the ports tree
DEBUG: xorg-inputproto 1.5.1_0 is the latest installed
DEBUG: xorg-inputproto 1.5.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 1.5.1_0 >= xorg-inputproto
1.5.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-kbproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.3_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.3_0 is the latest installed
DEBUG: xorg-kbproto 1.0.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.3_0 >= xorg-kbproto 1.0.3_0
DEBUG: No need to upgrade! xorg-libX11 1.2.2_0 >= xorg-libX11 1.2.2_0
DEBUG: No need to upgrade! giflib 4.1.6_1 >= giflib 4.1.6_1
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libvorbis 1.2.3_0 exists in the ports tree
DEBUG: libvorbis 1.2.3_0 is the latest installed
DEBUG: libvorbis 1.2.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libvorbis.
DEBUG: Requested variant i386 is not provided by port libvorbis.
DEBUG: Requested variant macosx is not provided by port libvorbis.
DEBUG: No need to upgrade! libvorbis 1.2.3_0 >= libvorbis 1.2.3_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzo2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lzo2 2.03_1 exists in the ports tree
DEBUG: lzo2 2.03_1 is the latest installed
DEBUG: lzo2 2.03_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzo2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port lzo2.
DEBUG: Requested variant i386 is not provided by port lzo2.
DEBUG: Requested variant macosx is not provided by port lzo2.
DEBUG: No need to upgrade! lzo2 2.03_1 >= lzo2 2.03_1
---> Computing dependencies for MPlayer
DEBUG: Searching for dependency: jpeg
DEBUG: Found Dependency: receipt exists for jpeg
DEBUG: Searching for dependency: lame
DEBUG: Found Dependency: receipt exists for lame
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: libmad
DEBUG: Found Dependency: receipt exists for libmad
DEBUG: Searching for dependency: libogg
DEBUG: Found Dependency: receipt exists for libogg
DEBUG: Searching for dependency: libpng
DEBUG: Found Dependency: receipt exists for libpng
DEBUG: Searching for dependency: giflib
DEBUG: Found Dependency: receipt exists for giflib
DEBUG: Searching for dependency: libvorbis
DEBUG: Found Dependency: receipt exists for libvorbis
DEBUG: Searching for dependency: lzo2
DEBUG: Found Dependency: receipt exists for lzo2
DEBUG: Searching for dependency: ncurses
DEBUG: Found Dependency: receipt exists for ncurses
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Executing org.macports.main (MPlayer)
DEBUG: Skipping completed org.macports.fetch (MPlayer)
DEBUG: Skipping completed org.macports.checksum (MPlayer)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (MPlayer)
DEBUG: Skipping completed org.macports.patch (MPlayer)
DEBUG: Skipping completed org.macports.configure (MPlayer)
---> Building MPlayer
DEBUG: Executing org.macports.build (MPlayer)
DEBUG: Environment: LD='/usr/bin/gcc-4.2' MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_MPlayer/work/MPlayer-1.0rc2"
&& /usr/bin/make -j2 all'
./codec-cfg ./etc/codecs.conf > codecs.conf.h
/usr/bin/make -C libvo libvo.a
make[1]: `libvo.a' is up to date.
/usr/bin/make -C libao2
Reading ./etc/codecs.conf: make[1]: Nothing to be done for `libs'.
/usr/bin/make -C input
make[1]: Nothing to be done for `libs'.
115 audio & 237 video codecs
/usr/bin/make -C libmpcodecs
/usr/bin/make -C libaf
make[1]: Nothing to be done for `libs'.
/usr/bin/make -C libmpdemux libmpdemux.a
make[1]: Nothing to be done for `libs'.
/usr/bin/make -C stream
make[1]: `libmpdemux.a' is up to date.
/usr/bin/make -C libswscale
make[1]: Nothing to be done for `libs'.
/usr/bin/make -C libvo libosd.a
make[1]: `libosd.a' is up to date.
make[1]: Nothing to be done for `all'.
/usr/bin/make -C libavformat
make[1]: Nothing to be done for `all'.
/usr/bin/make -C libavcodec
/usr/bin/make -C libavutil
make[1]: Nothing to be done for `all'.
/usr/bin/make -C mp3lib
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `libs'.
/usr/bin/make -C liba52
/usr/bin/make -C libmpeg2
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o resample.o resample.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o alloc.o alloc.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o cpu_accel.o cpu_accel.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o cpu_state.o cpu_state.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o decode.o decode.c
{standard input}:30:32-bit absolute addressing is not supported for x86-64
{standard input}:30:cannot do signed 4 byte relocation
{standard input}:31:32-bit absolute addressing is not supported for x86-64
{standard input}:31:cannot do signed 4 byte relocation
{standard input}:32:32-bit absolute addressing is not supported for x86-64
{standard input}:32:cannot do signed 4 byte relocation
{standard input}:33:32-bit absolute addressing is not supported for x86-64
{standard input}:33:cannot do signed 4 byte relocation
{standard input}:67:32-bit absolute addressing is not supported for x86-64
{standard input}:67:cannot do signed 4 byte relocation
{standard input}:97:32-bit absolute addressing is not supported for x86-64
{standard input}:97:cannot do signed 4 byte relocation
{standard input}:150:32-bit absolute addressing is not supported for
x86-64
{standard input}:150:cannot do signed 4 byte relocation
{standard input}:201:32-bit absolute addressing is not supported for
x86-64
{standard input}:201:cannot do signed 4 byte relocation
{standard input}:258:32-bit absolute addressing is not supported for
x86-64
{standard input}:258:cannot do signed 4 byte relocation
{standard input}:298:32-bit absolute addressing is not supported for
x86-64
{standard input}:298:cannot do signed 4 byte relocation
{standard input}:334:32-bit absolute addressing is not supported for
x86-64
{standard input}:334:cannot do signed 4 byte relocation
{standard input}:372:32-bit absolute addressing is not supported for
x86-64
{standard input}:372:cannot do signed 4 byte relocation
{standard input}:415:32-bit absolute addressing is not supported for
x86-64
{standard input}:415:cannot do signed 4 byte relocation
make[1]: *** [resample.o] Error 1
make: *** [liba52/liba52.a] Error 2
make: *** Waiting for unfinished jobs....
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o header.o header.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o idct.o idct.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o motion_comp.o
motion_comp.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o slice.o slice.c
ar r libmpeg2.a alloc.o cpu_accel.o cpu_state.o decode.o header.o idct.o
motion_comp.o slice.o
ar: creating archive libmpeg2.a
ranlib libmpeg2.a
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_MPlayer/work/MPlayer-1.0rc2"
&& /usr/bin/make -j2 all " returned error 2
Command output: {standard input}:33:32-bit absolute addressing is not
supported for x86-64
{standard input}:33:cannot do signed 4 byte relocation
{standard input}:67:32-bit absolute addressing is not supported for x86-64
{standard input}:67:cannot do signed 4 byte relocation
{standard input}:97:32-bit absolute addressing is not supported for x86-64
{standard input}:97:cannot do signed 4 byte relocation
{standard input}:150:32-bit absolute addressing is not supported for
x86-64
{standard input}:150:cannot do signed 4 byte relocation
{standard input}:201:32-bit absolute addressing is not supported for
x86-64
{standard input}:201:cannot do signed 4 byte relocation
{standard input}:258:32-bit absolute addressing is not supported for
x86-64
{standard input}:258:cannot do signed 4 byte relocation
{standard input}:298:32-bit absolute addressing is not supported for
x86-64
{standard input}:298:cannot do signed 4 byte relocation
{standard input}:334:32-bit absolute addressing is not supported for
x86-64
{standard input}:334:cannot do signed 4 byte relocation
{standard input}:372:32-bit absolute addressing is not supported for
x86-64
{standard input}:372:cannot do signed 4 byte relocation
{standard input}:415:32-bit absolute addressing is not supported for
x86-64
{standard input}:415:cannot do signed 4 byte relocation
make[1]: *** [resample.o] Error 1
make: *** [liba52/liba52.a] Error 2
make: *** Waiting for unfinished jobs....
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o header.o header.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o idct.o idct.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o motion_comp.o
motion_comp.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o slice.o slice.c
ar r libmpeg2.a alloc.o cpu_accel.o cpu_state.o decode.o header.o idct.o
motion_comp.o slice.o
ar: creating archive libmpeg2.a
ranlib libmpeg2.a
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_MPlayer/work/MPlayer-1.0rc2"
&& /usr/bin/make -j2 all " returned error 2
Command output: {standard input}:33:32-bit absolute addressing is not
supported for x86-64
{standard input}:33:cannot do signed 4 byte relocation
{standard input}:67:32-bit absolute addressing is not supported for x86-64
{standard input}:67:cannot do signed 4 byte relocation
{standard input}:97:32-bit absolute addressing is not supported for x86-64
{standard input}:97:cannot do signed 4 byte relocation
{standard input}:150:32-bit absolute addressing is not supported for
x86-64
{standard input}:150:cannot do signed 4 byte relocation
{standard input}:201:32-bit absolute addressing is not supported for
x86-64
{standard input}:201:cannot do signed 4 byte relocation
{standard input}:258:32-bit absolute addressing is not supported for
x86-64
{standard input}:258:cannot do signed 4 byte relocation
{standard input}:298:32-bit absolute addressing is not supported for
x86-64
{standard input}:298:cannot do signed 4 byte relocation
{standard input}:334:32-bit absolute addressing is not supported for
x86-64
{standard input}:334:cannot do signed 4 byte relocation
{standard input}:372:32-bit absolute addressing is not supported for
x86-64
{standard input}:372:cannot do signed 4 byte relocation
{standard input}:415:32-bit absolute addressing is not supported for
x86-64
{standard input}:415:cannot do signed 4 byte relocation
make[1]: *** [resample.o] Error 1
make: *** [liba52/liba52.a] Error 2
make: *** Waiting for unfinished jobs....
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o header.o header.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o idct.o idct.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o motion_comp.o
motion_comp.c
/usr/bin/gcc-4.2 -I../libavcodec -I../libavformat -Wdisabled-optimization
-Wno-pointer-sign -Wdeclaration-after-statement -I. -I.. -I../libavutil
-Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -pipe -ffast-
math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN
-shared-libgcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/opt/local/include/lzo
-I/opt/local/include -I/usr/local/include -c -o slice.o slice.c
ar r libmpeg2.a alloc.o cpu_accel.o cpu_state.o decode.o header.o idct.o
motion_comp.o slice.o
ar: creating archive libmpeg2.a
ranlib libmpeg2.a
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for MPlayer):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: Status 1 encountered during processing.
--
Ticket URL: <http://trac.macports.org/ticket/21772#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list