[MacPorts] #21782: install kde fails at xorg-libXxf86vm

MacPorts noreply at macports.org
Fri Oct 2 13:13:54 PDT 2009


#21782: install kde fails at xorg-libXxf86vm
--------------------------------+-------------------------------------------
 Reporter:  thedoobs@…          |       Owner:  macports-tickets@…                   
     Type:  defect              |      Status:  new                                  
 Priority:  Normal              |   Milestone:                                       
Component:  ports               |     Version:  1.8.1                                
 Keywords:                      |        Port:  xorg-libXxf86vm                      
--------------------------------+-------------------------------------------
 Installing kde on a new install of macports fails at xorg-libXxf86vm.
 Here is the debug output from "sudo port -d install kde":

 {{{
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kde
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kde
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port kde.
 DEBUG: Requested variant i386 is not provided by port kde.
 DEBUG: Requested variant macosx is not provided by port kde.
 DEBUG: Attempting ln -sf
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kde/work
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kde/work
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: kdelibs3 3.5.10_2 exists in the ports tree
 DEBUG: kdelibs3 3.5.10_2  is the latest installed
 DEBUG: kdelibs3 3.5.10_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port kdelibs3.
 DEBUG: Requested variant i386 is not provided by port kdelibs3.
 DEBUG: Requested variant macosx is not provided by port kdelibs3.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf263
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf263 2.63_0 exists in the ports tree
 DEBUG: autoconf263 2.63_0  is the latest installed
 DEBUG: autoconf263 2.63_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf263
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf263.
 DEBUG: Requested variant i386 is not provided by port autoconf263.
 DEBUG: Requested variant macosx is not provided by port autoconf263.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.13_0 exists in the ports tree
 DEBUG: m4 1.4.13_0  is the latest installed
 DEBUG: m4 1.4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.36.4_1 exists in the ports tree
 DEBUG: help2man 1.36.4_1  is the latest installed
 DEBUG: help2man 1.36.4_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_0  is the latest installed
 DEBUG: p5-locale-gettext 1.05_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4  is the latest installed
 DEBUG: gettext 0.17_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13_0 exists in the ports tree
 DEBUG: libiconv 1.13_0  is the latest installed
 DEBUG: libiconv 1.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
 1.05_0
 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
 DEBUG: No need to upgrade! autoconf263 2.63_0 >= autoconf263 2.63_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1  is the latest installed
 DEBUG: pkgconfig 0.23_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/unsermake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: unsermake 0.4-20070824_2 exists in the ports tree
 DEBUG: unsermake 0.4-20070824_2  is the latest installed
 DEBUG: unsermake 0.4-20070824_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/unsermake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port unsermake.
 DEBUG: Requested variant i386 is not provided by port unsermake.
 DEBUG: Requested variant macosx is not provided by port unsermake.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: python26 2.6.2_6 exists in the ports tree
 DEBUG: python26 2.6.2_6 +darwin is the latest installed
 DEBUG: python26 2.6.2_6 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port python26.
 DEBUG: Requested variant macosx is not provided by port python26.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.64_2 exists in the ports tree
 DEBUG: autoconf 2.64_2  is the latest installed
 DEBUG: autoconf 2.64_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11_0 exists in the ports tree
 DEBUG: automake 1.11_0  is the latest installed
 DEBUG: automake 1.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6a_0 exists in the ports tree
 DEBUG: libtool 2.2.6a_0  is the latest installed
 DEBUG: libtool 2.2.6a_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libtool.
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.3_3 exists in the ports tree
 DEBUG: zlib 1.2.3_3  is the latest installed
 DEBUG: zlib 1.2.3_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant i386 is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: openssl 0.9.8k_0 exists in the ports tree
 DEBUG: openssl 0.9.8k_0 +darwin is the latest installed
 DEBUG: openssl 0.9.8k_0 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port openssl.
 DEBUG: Requested variant macosx is not provided by port openssl.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! openssl 0.9.8k_0 >= openssl 0.9.8k_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tk 8.5.6_1 exists in the ports tree
 DEBUG: tk 8.5.6_1 +darwin is the latest installed
 DEBUG: tk 8.5.6_1 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port tk.
 DEBUG: Requested variant macosx is not provided by port tk.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tcl 8.5.6_0 exists in the ports tree
 DEBUG: tcl 8.5.6_0 +darwin is the latest installed
 DEBUG: tcl 8.5.6_0 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port tcl.
 DEBUG: Requested variant macosx is not provided by port tcl.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! tcl 8.5.6_0 >= tcl 8.5.6_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: Xft2 2.1.13_2 exists in the ports tree
 DEBUG: Xft2 2.1.13_2  is the latest installed
 DEBUG: Xft2 2.1.13_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port Xft2.
 DEBUG: Requested variant i386 is not provided by port Xft2.
 DEBUG: Requested variant macosx is not provided by port Xft2.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.5_0 exists in the ports tree
 DEBUG: xrender 0.9.5_0  is the latest installed
 DEBUG: xrender 0.9.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xrender.
 DEBUG: Requested variant i386 is not provided by port xrender.
 DEBUG: Requested variant macosx is not provided by port xrender.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-renderproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
 DEBUG: xorg-renderproto 0.11_0  is the latest installed
 DEBUG: xorg-renderproto 0.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
 DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
 DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
 DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
 0.11_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3_0  is the latest installed
 DEBUG: xorg-libX11 1.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.3.0_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.3.0_0  is the latest installed
 DEBUG: xorg-util-macros 1.3.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.3.0_0 >= xorg-util-macros
 1.3.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.4_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.4_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.4_0 >= xorg-xtrans 1.2.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.3_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.3_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.3_0 >= xorg-kbproto 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0  is the latest installed
 DEBUG: xorg-libXau 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: No need to upgrade! xorg-libX11 1.3_0 >= xorg-libX11 1.3_0
 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freetype 2.3.9_1 exists in the ports tree
 DEBUG: freetype 2.3.9_1 +macosx is the latest installed
 DEBUG: freetype 2.3.9_1 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port freetype.
 DEBUG: Requested variant i386 is not provided by port freetype.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: No need to upgrade! freetype 2.3.9_1 >= freetype 2.3.9_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fontconfig 2.7.3_0 exists in the ports tree
 DEBUG: fontconfig 2.7.3_0 +macosx is the latest installed
 DEBUG: fontconfig 2.7.3_0 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port fontconfig.
 DEBUG: Requested variant i386 is not provided by port fontconfig.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: No need to upgrade! fontconfig 2.7.3_0 >= fontconfig 2.7.3_0
 DEBUG: No need to upgrade! Xft2 2.1.13_2 >= Xft2 2.1.13_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXScrnSaver
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
 DEBUG: xorg-libXScrnSaver 1.2.0_0  is the latest installed
 DEBUG: xorg-libXScrnSaver 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXScrnSaver
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-
 libXScrnSaver.
 DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
 DEBUG: Requested variant macosx is not provided by port xorg-
 libXScrnSaver.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.1_0 exists in the ports tree
 DEBUG: xorg-libXext 1.1_0  is the latest installed
 DEBUG: xorg-libXext 1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXext.
 DEBUG: Requested variant i386 is not provided by port xorg-libXext.
 DEBUG: Requested variant macosx is not provided by port xorg-libXext.
 DEBUG: No need to upgrade! xorg-libXext 1.1_0 >= xorg-libXext 1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-scrnsaverproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
 DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 scrnsaverproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 scrnsaverproto.
 DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 scrnsaverproto.
 DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-
 scrnsaverproto 1.2.0_0
 DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-
 libXScrnSaver 1.2.0_0
 DEBUG: No need to upgrade! tk 8.5.6_1 >= tk 8.5.6_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: sqlite3 3.6.18_0 exists in the ports tree
 DEBUG: sqlite3 3.6.18_0  is the latest installed
 DEBUG: sqlite3 3.6.18_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port sqlite3.
 DEBUG: Requested variant i386 is not provided by port sqlite3.
 DEBUG: Requested variant macosx is not provided by port sqlite3.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: readline 6.0.000_2 exists in the ports tree
 DEBUG: readline 6.0.000_2 +darwin is the latest installed
 DEBUG: readline 6.0.000_2 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port readline.
 DEBUG: Requested variant macosx is not provided by port readline.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2
 DEBUG: No need to upgrade! sqlite3 3.6.18_0 >= sqlite3 3.6.18_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: db46 4.6.21_5 exists in the ports tree
 DEBUG: db46 4.6.21_5  is the latest installed
 DEBUG: db46 4.6.21_5  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port db46.
 DEBUG: Requested variant i386 is not provided by port db46.
 DEBUG: Requested variant macosx is not provided by port db46.
 DEBUG: No need to upgrade! db46 4.6.21_5 >= db46 4.6.21_5
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gdbm 1.8.3_1 exists in the ports tree
 DEBUG: gdbm 1.8.3_1  is the latest installed
 DEBUG: gdbm 1.8.3_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gdbm.
 DEBUG: Requested variant i386 is not provided by port gdbm.
 DEBUG: Requested variant macosx is not provided by port gdbm.
 DEBUG: No need to upgrade! gdbm 1.8.3_1 >= gdbm 1.8.3_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: bzip2 1.0.5_3 exists in the ports tree
 DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
 DEBUG: bzip2 1.0.5_3 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port bzip2.
 DEBUG: Requested variant macosx is not provided by port bzip2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
 DEBUG: No need to upgrade! python26 2.6.2_6 >= python26 2.6.2_6
 DEBUG: No need to upgrade! unsermake 0.4-20070824_2 >= unsermake
 0.4-20070824_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /poll-emulator
 DEBUG: poll-emulator is *not* installed by MacPorts
 DEBUG: Searching for dependency: poll-emulator
 DEBUG: Didn't find receipt, going to depspec regex for: poll-emulator
 DEBUG: Found Dependency: path: /usr/lib filename: libpoll.dylib regex:
 ^libpoll\.dylib$
 DEBUG: poll-emulator not installed, soft dependency satisfied
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: mesa 7.6_0 exists in the ports tree
 DEBUG: mesa 7.6_0 +hw_render is the latest installed
 DEBUG: mesa 7.6_0 +hw_render is active
 DEBUG: Merging existing variants hw_render into variants
 DEBUG: new fully merged portvariants: hw_render +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port mesa.
 DEBUG: Requested variant i386 is not provided by port mesa.
 DEBUG: Requested variant macosx is not provided by port mesa.
 DEBUG: Executing variant hw_render provides hw_render
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/makedepend
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: makedepend 1.0.1_0 exists in the ports tree
 DEBUG: makedepend 1.0.1_0  is the latest installed
 DEBUG: makedepend 1.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/makedepend
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port makedepend.
 DEBUG: Requested variant i386 is not provided by port makedepend.
 DEBUG: Requested variant macosx is not provided by port makedepend.
 DEBUG: No need to upgrade! makedepend 1.0.1_0 >= makedepend 1.0.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/glut
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: glut 3.7_3 exists in the ports tree
 DEBUG: glut 3.7_3  is the latest installed
 DEBUG: glut 3.7_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/glut
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port glut.
 DEBUG: Requested variant i386 is not provided by port glut.
 DEBUG: Requested variant macosx is not provided by port glut.
 DEBUG: No need to upgrade! glut 3.7_3 >= glut 3.7_3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-glproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-glproto 1.4.10_0 exists in the ports tree
 DEBUG: xorg-glproto 1.4.10_0  is the latest installed
 DEBUG: xorg-glproto 1.4.10_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 glproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-glproto.
 DEBUG: Requested variant i386 is not provided by port xorg-glproto.
 DEBUG: Requested variant macosx is not provided by port xorg-glproto.
 DEBUG: No need to upgrade! xorg-glproto 1.4.10_0 >= xorg-glproto 1.4.10_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-dri2proto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-dri2proto 2.1_0 exists in the ports tree
 DEBUG: xorg-dri2proto 2.1_0  is the latest installed
 DEBUG: xorg-dri2proto 2.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 dri2proto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-dri2proto.
 DEBUG: Requested variant i386 is not provided by port xorg-dri2proto.
 DEBUG: Requested variant macosx is not provided by port xorg-dri2proto.
 DEBUG: No need to upgrade! xorg-dri2proto 2.1_0 >= xorg-dri2proto 2.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXfixes
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXfixes 4.0.3_1 exists in the ports tree
 DEBUG: xorg-libXfixes 4.0.3_1  is the latest installed
 DEBUG: xorg-libXfixes 4.0.3_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXfixes
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXfixes.
 DEBUG: Requested variant i386 is not provided by port xorg-libXfixes.
 DEBUG: Requested variant macosx is not provided by port xorg-libXfixes.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-fixesproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-fixesproto 4.1_0 exists in the ports tree
 DEBUG: xorg-fixesproto 4.1_0  is the latest installed
 DEBUG: xorg-fixesproto 4.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 fixesproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-fixesproto.
 DEBUG: Requested variant i386 is not provided by port xorg-fixesproto.
 DEBUG: Requested variant macosx is not provided by port xorg-fixesproto.
 DEBUG: No need to upgrade! xorg-fixesproto 4.1_0 >= xorg-fixesproto 4.1_0
 DEBUG: No need to upgrade! xorg-libXfixes 4.0.3_1 >= xorg-libXfixes
 4.0.3_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXi
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXi 1.3_0 exists in the ports tree
 DEBUG: xorg-libXi 1.3_0  is the latest installed
 DEBUG: xorg-libXi 1.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXi.
 DEBUG: Requested variant i386 is not provided by port xorg-libXi.
 DEBUG: Requested variant macosx is not provided by port xorg-libXi.
 DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXmu
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
 DEBUG: xorg-libXmu 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXmu
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
 DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
 DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXt 1.0.6_0 exists in the ports tree
 DEBUG: xorg-libXt 1.0.6_0  is the latest installed
 DEBUG: xorg-libXt 1.0.6_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXt
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXt.
 DEBUG: Requested variant i386 is not provided by port xorg-libXt.
 DEBUG: Requested variant macosx is not provided by port xorg-libXt.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libsm
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libsm 1.1.1_0  is the latest installed
 DEBUG: xorg-libsm 1.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libsm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libsm.
 DEBUG: Requested variant i386 is not provided by port xorg-libsm.
 DEBUG: Requested variant macosx is not provided by port xorg-libsm.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libice
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
 DEBUG: xorg-libice 1.0.6_0  is the latest installed
 DEBUG: xorg-libice 1.0.6_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libice
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libice.
 DEBUG: Requested variant i386 is not provided by port xorg-libice.
 DEBUG: Requested variant macosx is not provided by port xorg-libice.
 DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
 DEBUG: No need to upgrade! xorg-libXt 1.0.6_0 >= xorg-libXt 1.0.6_0
 DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
 DEBUG: No need to upgrade! mesa 7.6_0 >= mesa 7.6_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: aspell 0.60.6_2 exists in the ports tree
 DEBUG: aspell 0.60.6_2 +macosx is the latest installed
 DEBUG: aspell 0.60.6_2 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port aspell.
 DEBUG: Requested variant i386 is not provided by port aspell.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: texinfo 4.13_0 exists in the ports tree
 DEBUG: texinfo 4.13_0  is the latest installed
 DEBUG: texinfo 4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port texinfo.
 DEBUG: Requested variant i386 is not provided by port texinfo.
 DEBUG: Requested variant macosx is not provided by port texinfo.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lzmautils 4.32.7_1 exists in the ports tree
 DEBUG: lzmautils 4.32.7_1  is the latest installed
 DEBUG: lzmautils 4.32.7_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port lzmautils.
 DEBUG: Requested variant i386 is not provided by port lzmautils.
 DEBUG: Requested variant macosx is not provided by port lzmautils.
 DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1
 DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0
 DEBUG: No need to upgrade! aspell 0.60.6_2 >= aspell 0.60.6_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: flex 2.5.35_0 exists in the ports tree
 DEBUG: flex 2.5.35_0  is the latest installed
 DEBUG: flex 2.5.35_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port flex.
 DEBUG: Requested variant i386 is not provided by port flex.
 DEBUG: Requested variant macosx is not provided by port flex.
 DEBUG: No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: glib2 2.22.0_1 exists in the ports tree
 DEBUG: glib2 2.22.0_1 +darwin is the latest installed
 DEBUG: glib2 2.22.0_1 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port glib2.
 DEBUG: Requested variant macosx is not provided by port glib2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: python_select 0.3_0 exists in the ports tree
 DEBUG: python_select 0.3_0 +darwin_10 is the latest installed
 DEBUG: python_select 0.3_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port python_select.
 DEBUG: Requested variant i386 is not provided by port python_select.
 DEBUG: Requested variant macosx is not provided by port python_select.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! python_select 0.3_0 >= python_select 0.3_0
 DEBUG: No need to upgrade! glib2 2.22.0_1 >= glib2 2.22.0_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /hicolor-icon-theme
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: hicolor-icon-theme 0.10_0 exists in the ports tree
 DEBUG: hicolor-icon-theme 0.10_0  is the latest installed
 DEBUG: hicolor-icon-theme 0.10_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /hicolor-icon-theme
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port hicolor-icon-
 theme.
 DEBUG: Requested variant i386 is not provided by port hicolor-icon-theme.
 DEBUG: Requested variant macosx is not provided by port hicolor-icon-
 theme.
 DEBUG: No need to upgrade! hicolor-icon-theme 0.10_0 >= hicolor-icon-theme
 0.10_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jasper 1.900.1_5 exists in the ports tree
 DEBUG: jasper 1.900.1_5  is the latest installed
 DEBUG: jasper 1.900.1_5  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port jasper.
 DEBUG: Requested variant i386 is not provided by port jasper.
 DEBUG: Requested variant macosx is not provided by port jasper.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip
 DEBUG: unzip is *not* installed by MacPorts
 DEBUG: Searching for dependency: unzip
 DEBUG: Didn't find receipt, going to depspec regex for: unzip
 DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
 DEBUG: unzip not installed, soft dependency satisfied
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jpeg 6b_3 exists in the ports tree
 DEBUG: jpeg 6b_3  is the latest installed
 DEBUG: jpeg 6b_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port jpeg.
 DEBUG: Requested variant i386 is not provided by port jpeg.
 DEBUG: Requested variant macosx is not provided by port jpeg.
 DEBUG: No need to upgrade! jpeg 6b_3 >= jpeg 6b_3
 DEBUG: No need to upgrade! jasper 1.900.1_5 >= jasper 1.900.1_5
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
 DEBUG: libart_lgpl 2.3.20_0  is the latest installed
 DEBUG: libart_lgpl 2.3.20_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libart_lgpl.
 DEBUG: Requested variant i386 is not provided by port libart_lgpl.
 DEBUG: Requested variant macosx is not provided by port libart_lgpl.
 DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libidn 1.15_0 exists in the ports tree
 DEBUG: libidn 1.15_0  is the latest installed
 DEBUG: libidn 1.15_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libidn.
 DEBUG: Requested variant i386 is not provided by port libidn.
 DEBUG: Requested variant macosx is not provided by port libidn.
 DEBUG: No need to upgrade! libidn 1.15_0 >= libidn 1.15_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpng 1.2.38_0 exists in the ports tree
 DEBUG: libpng 1.2.38_0  is the latest installed
 DEBUG: libpng 1.2.38_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libpng.
 DEBUG: Requested variant i386 is not provided by port libpng.
 DEBUG: Requested variant macosx is not provided by port libpng.
 DEBUG: No need to upgrade! libpng 1.2.38_0 >= libpng 1.2.38_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libxml2 2.7.5_0 exists in the ports tree
 DEBUG: libxml2 2.7.5_0  is the latest installed
 DEBUG: libxml2 2.7.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libxml2.
 DEBUG: Requested variant i386 is not provided by port libxml2.
 DEBUG: Requested variant macosx is not provided by port libxml2.
 DEBUG: No need to upgrade! libxml2 2.7.5_0 >= libxml2 2.7.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libxslt 1.1.26_0 exists in the ports tree
 DEBUG: libxslt 1.1.26_0  is the latest installed
 DEBUG: libxslt 1.1.26_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libxslt.
 DEBUG: Requested variant i386 is not provided by port libxslt.
 DEBUG: Requested variant macosx is not provided by port libxslt.
 DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pcre 7.9_0 exists in the ports tree
 DEBUG: pcre 7.9_0  is the latest installed
 DEBUG: pcre 7.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port pcre.
 DEBUG: Requested variant i386 is not provided by port pcre.
 DEBUG: Requested variant macosx is not provided by port pcre.
 DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tiff 3.9.1_0 exists in the ports tree
 DEBUG: tiff 3.9.1_0 +macosx is the latest installed
 DEBUG: tiff 3.9.1_0 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port tiff.
 DEBUG: Requested variant i386 is not provided by port tiff.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: No need to upgrade! tiff 3.9.1_0 >= tiff 3.9.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: openexr 1.6.1_1 exists in the ports tree
 DEBUG: openexr 1.6.1_1  is the latest installed
 DEBUG: openexr 1.6.1_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port openexr.
 DEBUG: Requested variant i386 is not provided by port openexr.
 DEBUG: Requested variant macosx is not provided by port openexr.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ilmbase 1.0.1_2 exists in the ports tree
 DEBUG: ilmbase 1.0.1_2  is the latest installed
 DEBUG: ilmbase 1.0.1_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port ilmbase.
 DEBUG: Requested variant i386 is not provided by port ilmbase.
 DEBUG: Requested variant macosx is not provided by port ilmbase.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gsed 4.2.1_0 exists in the ports tree
 DEBUG: gsed 4.2.1_0  is the latest installed
 DEBUG: gsed 4.2.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gsed.
 DEBUG: Requested variant i386 is not provided by port gsed.
 DEBUG: Requested variant macosx is not provided by port gsed.
 DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
 DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
 DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/qt3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: qt3 3.3.8_7 exists in the ports tree
 DEBUG: qt3 3.3.8_7 +darwin_10 is the latest installed
 DEBUG: qt3 3.3.8_7 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/qt3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port qt3.
 DEBUG: Requested variant i386 is not provided by port qt3.
 DEBUG: Requested variant macosx is not provided by port qt3.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXcursor
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXcursor 1.1.10_0 exists in the ports tree
 DEBUG: xorg-libXcursor 1.1.10_0  is the latest installed
 DEBUG: xorg-libXcursor 1.1.10_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcursor
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXcursor.
 DEBUG: Requested variant i386 is not provided by port xorg-libXcursor.
 DEBUG: Requested variant macosx is not provided by port xorg-libXcursor.
 DEBUG: No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor
 1.1.10_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXinerama
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXinerama 1.1_0 exists in the ports tree
 DEBUG: xorg-libXinerama 1.1_0  is the latest installed
 DEBUG: xorg-libXinerama 1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXinerama
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXinerama.
 DEBUG: Requested variant i386 is not provided by port xorg-libXinerama.
 DEBUG: Requested variant macosx is not provided by port xorg-libXinerama.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xineramaproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xineramaproto 1.2_0 exists in the ports tree
 DEBUG: xorg-xineramaproto 1.2_0  is the latest installed
 DEBUG: xorg-xineramaproto 1.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xineramaproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xineramaproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xineramaproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xineramaproto.
 DEBUG: No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto
 1.2_0
 DEBUG: No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama
 1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXrandr
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
 DEBUG: xorg-libXrandr 1.3.0_1  is the latest installed
 DEBUG: xorg-libXrandr 1.3.0_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
 DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
 DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-randrproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-randrproto 1.3.0_0 exists in the ports tree
 DEBUG: xorg-randrproto 1.3.0_0  is the latest installed
 DEBUG: xorg-randrproto 1.3.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
 DEBUG: Requested variant i386 is not provided by port xorg-randrproto.
 DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
 DEBUG: No need to upgrade! xorg-randrproto 1.3.0_0 >= xorg-randrproto
 1.3.0_0
 DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr
 1.3.0_1
 DEBUG: No need to upgrade! qt3 3.3.8_7 >= qt3 3.3.8_7
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /dejavu-fonts
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: dejavu-fonts 2.29_0 exists in the ports tree
 DEBUG: dejavu-fonts 2.29_0  is the latest installed
 DEBUG: dejavu-fonts 2.29_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /dejavu-fonts
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port dejavu-fonts.
 DEBUG: Requested variant i386 is not provided by port dejavu-fonts.
 DEBUG: Requested variant macosx is not provided by port dejavu-fonts.
 DEBUG: No need to upgrade! dejavu-fonts 2.29_0 >= dejavu-fonts 2.29_0
 DEBUG: No need to upgrade! kdelibs3 3.5.10_2 >= kdelibs3 3.5.10_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdebase3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: kdebase3 3.5.10_4 exists in the ports tree
 DEBUG: kdebase3 3.5.10_4 +darwin_10 is the latest installed
 DEBUG: kdebase3 3.5.10_4 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdebase3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port kdebase3.
 DEBUG: Requested variant i386 is not provided by port kdebase3.
 DEBUG: Requested variant macosx is not provided by port kdebase3.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/imake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: imake 1.0.2_1 exists in the ports tree
 DEBUG: imake 1.0.2_1  is the latest installed
 DEBUG: imake 1.0.2_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/imake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port imake.
 DEBUG: Requested variant i386 is not provided by port imake.
 DEBUG: Requested variant macosx is not provided by port imake.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-cf-files
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-cf-files 1.0.2_3 exists in the ports tree
 DEBUG: xorg-cf-files 1.0.2_3  is the latest installed
 DEBUG: xorg-cf-files 1.0.2_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 cf-files
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-cf-files.
 DEBUG: Requested variant i386 is not provided by port xorg-cf-files.
 DEBUG: Requested variant macosx is not provided by port xorg-cf-files.
 DEBUG: No need to upgrade! xorg-cf-files 1.0.2_3 >= xorg-cf-files 1.0.2_3
 DEBUG: No need to upgrade! imake 1.0.2_1 >= imake 1.0.2_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/security
 /cyrus-sasl2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: cyrus-sasl2 2.1.23_0 exists in the ports tree
 DEBUG: cyrus-sasl2 2.1.23_0 +kerberos is the latest installed
 DEBUG: cyrus-sasl2 2.1.23_0 +kerberos is active
 DEBUG: Merging existing variants kerberos into variants
 DEBUG: new fully merged portvariants: kerberos +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/security
 /cyrus-sasl2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port cyrus-sasl2.
 DEBUG: Requested variant i386 is not provided by port cyrus-sasl2.
 DEBUG: Requested variant macosx is not provided by port cyrus-sasl2.
 DEBUG: Executing variant kerberos provides kerberos
 DEBUG: No need to upgrade! cyrus-sasl2 2.1.23_0 >= cyrus-sasl2 2.1.23_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libusb-compat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libusb-compat 0.1.3_0 exists in the ports tree
 DEBUG: libusb-compat 0.1.3_0  is the latest installed
 DEBUG: libusb-compat 0.1.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libusb-compat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libusb-compat.
 DEBUG: Requested variant i386 is not provided by port libusb-compat.
 DEBUG: Requested variant macosx is not provided by port libusb-compat.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libusb 1.0.3_0 exists in the ports tree
 DEBUG: libusb 1.0.3_0  is the latest installed
 DEBUG: libusb 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libusb.
 DEBUG: Requested variant i386 is not provided by port libusb.
 DEBUG: Requested variant macosx is not provided by port libusb.
 DEBUG: No need to upgrade! libusb 1.0.3_0 >= libusb 1.0.3_0
 DEBUG: No need to upgrade! libusb-compat 0.1.3_0 >= libusb-compat 0.1.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXcomposite
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXcomposite 0.4.0_1 exists in the ports tree
 DEBUG: xorg-libXcomposite 0.4.0_1  is the latest installed
 DEBUG: xorg-libXcomposite 0.4.0_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcomposite
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-
 libXcomposite.
 DEBUG: Requested variant i386 is not provided by port xorg-libXcomposite.
 DEBUG: Requested variant macosx is not provided by port xorg-
 libXcomposite.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-compositeproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-compositeproto 0.4_0 exists in the ports tree
 DEBUG: xorg-compositeproto 0.4_0  is the latest installed
 DEBUG: xorg-compositeproto 0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 compositeproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 compositeproto.
 DEBUG: Requested variant i386 is not provided by port xorg-compositeproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 compositeproto.
 DEBUG: No need to upgrade! xorg-compositeproto 0.4_0 >= xorg-
 compositeproto 0.4_0
 DEBUG: No need to upgrade! xorg-libXcomposite 0.4.0_1 >= xorg-
 libXcomposite 0.4.0_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdamage
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdamage 1.1.1_1 exists in the ports tree
 DEBUG: xorg-libXdamage 1.1.1_1  is the latest installed
 DEBUG: xorg-libXdamage 1.1.1_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdamage
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdamage.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdamage.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdamage.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-damageproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-damageproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-damageproto 1.2.0_0  is the latest installed
 DEBUG: xorg-damageproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 damageproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-damageproto.
 DEBUG: Requested variant i386 is not provided by port xorg-damageproto.
 DEBUG: Requested variant macosx is not provided by port xorg-damageproto.
 DEBUG: No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto
 1.2.0_0
 DEBUG: No need to upgrade! xorg-libXdamage 1.1.1_1 >= xorg-libXdamage
 1.1.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libxkbfile
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libxkbfile 1.0.5_1 exists in the ports tree
 DEBUG: xorg-libxkbfile 1.0.5_1  is the latest installed
 DEBUG: xorg-libxkbfile 1.0.5_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libxkbfile
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libxkbfile.
 DEBUG: Requested variant i386 is not provided by port xorg-libxkbfile.
 DEBUG: Requested variant macosx is not provided by port xorg-libxkbfile.
 DEBUG: No need to upgrade! xorg-libxkbfile 1.0.5_1 >= xorg-libxkbfile
 1.0.5_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXtst
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXtst 1.0.99.2_0 exists in the ports tree
 DEBUG: xorg-libXtst 1.0.99.2_0  is the latest installed
 DEBUG: xorg-libXtst 1.0.99.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXtst
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXtst.
 DEBUG: Requested variant i386 is not provided by port xorg-libXtst.
 DEBUG: Requested variant macosx is not provided by port xorg-libXtst.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-recordproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-recordproto 1.14_0 exists in the ports tree
 DEBUG: xorg-recordproto 1.14_0  is the latest installed
 DEBUG: xorg-recordproto 1.14_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 recordproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-recordproto.
 DEBUG: Requested variant i386 is not provided by port xorg-recordproto.
 DEBUG: Requested variant macosx is not provided by port xorg-recordproto.
 DEBUG: No need to upgrade! xorg-recordproto 1.14_0 >= xorg-recordproto
 1.14_0
 DEBUG: No need to upgrade! xorg-libXtst 1.0.99.2_0 >= xorg-libXtst
 1.0.99.2_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXxf86misc
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXxf86misc 1.0.1_2 exists in the ports tree
 DEBUG: xorg-libXxf86misc 1.0.1_2  is the latest installed
 DEBUG: xorg-libXxf86misc 1.0.1_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXxf86misc
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXxf86misc.
 DEBUG: Requested variant i386 is not provided by port xorg-libXxf86misc.
 DEBUG: Requested variant macosx is not provided by port xorg-libXxf86misc.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86miscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86miscproto 0.9.2_0 exists in the ports tree
 DEBUG: xorg-xf86miscproto 0.9.2_0  is the latest installed
 DEBUG: xorg-xf86miscproto 0.9.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86miscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86miscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xf86miscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86miscproto.
 DEBUG: No need to upgrade! xorg-xf86miscproto 0.9.2_0 >= xorg-
 xf86miscproto 0.9.2_0
 DEBUG: No need to upgrade! xorg-libXxf86misc 1.0.1_2 >= xorg-libXxf86misc
 1.0.1_2
 DEBUG: No need to upgrade! kdebase3 3.5.10_4 >= kdebase3 3.5.10_4
 --->  Computing dependencies for kde
 DEBUG: Searching for dependency: kdelibs3
 DEBUG: Found Dependency: receipt exists for kdelibs3
 DEBUG: Searching for dependency: kdebase3
 DEBUG: Found Dependency: receipt exists for kdebase3
 DEBUG: Searching for dependency: kdenetwork3
 DEBUG: Didn't find receipt, going to depspec regex for: kdenetwork3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdenetwork3
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdenetwork3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port kdenetwork3.
 DEBUG: Requested variant i386 is not provided by port kdenetwork3.
 DEBUG: Requested variant macosx is not provided by port kdenetwork3.
 DEBUG: Searching for dependency: kdepim3
 DEBUG: Didn't find receipt, going to depspec regex for: kdepim3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdepim3
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdepim3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port kdepim3.
 DEBUG: Requested variant i386 is not provided by port kdepim3.
 DEBUG: Requested variant macosx is not provided by port kdepim3.
 DEBUG: Searching for dependency: kdeutils3
 DEBUG: Didn't find receipt, going to depspec regex for: kdeutils3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdeutils3
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdeutils3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port kdeutils3.
 DEBUG: Requested variant i386 is not provided by port kdeutils3.
 DEBUG: Requested variant macosx is not provided by port kdeutils3.
 DEBUG: Searching for dependency: kdebase3
 DEBUG: Found Dependency: receipt exists for kdebase3
 DEBUG: Searching for dependency: openslp
 DEBUG: Found Dependency: receipt exists for openslp
 DEBUG: Searching for dependency: xorg-libXxf86vm
 DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXxf86vm
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXxf86vm
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXxf86vm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXxf86vm.
 DEBUG: Requested variant i386 is not provided by port xorg-libXxf86vm.
 DEBUG: Requested variant macosx is not provided by port xorg-libXxf86vm.
 DEBUG: Searching for dependency: autoconf263
 DEBUG: Found Dependency: receipt exists for autoconf263
 DEBUG: Searching for dependency: unsermake
 DEBUG: Found Dependency: receipt exists for unsermake
 DEBUG: Searching for dependency: xorg-libXext
 DEBUG: Found Dependency: receipt exists for xorg-libXext
 DEBUG: Searching for dependency: xorg-xf86vidmodeproto
 DEBUG: Found Dependency: receipt exists for xorg-xf86vidmodeproto
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: gpgme
 DEBUG: Didn't find receipt, going to depspec regex for: gpgme
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gpgme
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gpgme
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port gpgme.
 DEBUG: Requested variant i386 is not provided by port gpgme.
 DEBUG: Requested variant macosx is not provided by port gpgme.
 DEBUG: Searching for dependency: kdeaccessibility3
 DEBUG: Didn't find receipt, going to depspec regex for: kdeaccessibility3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdeaccessibility3
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdeaccessibility3
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port kdeaccessibility3.
 DEBUG: Requested variant i386 is not provided by port kdeaccessibility3.
 DEBUG: Requested variant macosx is not provided by port kdeaccessibility3.
 DEBUG: Searching for dependency: kdebase3
 DEBUG: Found Dependency: receipt exists for kdebase3
 DEBUG: Searching for dependency: libgpg-error
 DEBUG: Didn't find receipt, going to depspec regex for: libgpg-error
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libgpg-error
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libgpg-error
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libgpg-error.
 DEBUG: Requested variant i386 is not provided by port libgpg-error.
 DEBUG: Requested variant macosx is not provided by port libgpg-error.
 DEBUG: Searching for dependency: opensync
 DEBUG: Didn't find receipt, going to depspec regex for: opensync
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opensync
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opensync
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port opensync.
 DEBUG: Requested variant i386 is not provided by port opensync.
 DEBUG: Requested variant macosx is not provided by port opensync.
 DEBUG: Searching for dependency: autoconf263
 DEBUG: Found Dependency: receipt exists for autoconf263
 DEBUG: Searching for dependency: unsermake
 DEBUG: Found Dependency: receipt exists for unsermake
 DEBUG: Searching for dependency: gnupg
 DEBUG: Didn't find receipt, going to depspec regex for: gnupg
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/gnupg
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/gnupg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port gnupg.
 DEBUG: Requested variant i386 is not provided by port gnupg.
 DEBUG: Requested variant macosx is not provided by port gnupg.
 DEBUG: Searching for dependency: pth
 DEBUG: Didn't find receipt, going to depspec regex for: pth
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pth
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pth
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pth.
 DEBUG: Requested variant i386 is not provided by port pth.
 DEBUG: Requested variant macosx is not provided by port pth.
 DEBUG: Searching for dependency: libgpg-error
 DEBUG: Didn't find receipt, going to depspec regex for: libgpg-error
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libgpg-error
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: readline
 DEBUG: Found Dependency: receipt exists for readline
 DEBUG: Searching for dependency: zlib
 DEBUG: Found Dependency: receipt exists for zlib
 DEBUG: Searching for dependency: bzip2
 DEBUG: Found Dependency: receipt exists for bzip2
 DEBUG: Searching for dependency: kdebase3
 DEBUG: Found Dependency: receipt exists for kdebase3
 DEBUG: Searching for dependency: autoconf263
 DEBUG: Found Dependency: receipt exists for autoconf263
 DEBUG: Searching for dependency: unsermake
 DEBUG: Found Dependency: receipt exists for unsermake
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: glib2
 DEBUG: Found Dependency: receipt exists for glib2
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: libxml2
 DEBUG: Found Dependency: receipt exists for libxml2
 DEBUG: Searching for dependency: py26-gobject
 DEBUG: Didn't find receipt, going to depspec regex for: py26-gobject
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gobject
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gobject
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port py26-gobject.
 DEBUG: Requested variant i386 is not provided by port py26-gobject.
 DEBUG: Requested variant macosx is not provided by port py26-gobject.
 DEBUG: Searching for dependency: py26-numeric
 DEBUG: Didn't find receipt, going to depspec regex for: py26-numeric
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numeric
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numeric
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port py26-numeric.
 DEBUG: Requested variant i386 is not provided by port py26-numeric.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: Searching for dependency: python26
 DEBUG: Found Dependency: receipt exists for python26
 DEBUG: Searching for dependency: sqlite3
 DEBUG: Found Dependency: receipt exists for sqlite3
 DEBUG: Searching for dependency: swig
 DEBUG: Didn't find receipt, going to depspec regex for: swig
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port swig.
 DEBUG: Requested variant i386 is not provided by port swig.
 DEBUG: Requested variant macosx is not provided by port swig.
 DEBUG: Executing variant python provides python
 DEBUG: Executing variant perl provides perl
 DEBUG: Executing variant ruby provides ruby
 DEBUG: Executing variant php5 provides php5
 DEBUG: Searching for dependency: zlib
 DEBUG: Found Dependency: receipt exists for zlib
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: glib2
 DEBUG: Found Dependency: receipt exists for glib2
 DEBUG: Searching for dependency: libxslt
 DEBUG: Found Dependency: receipt exists for libxslt
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: libffi
 DEBUG: Didn't find receipt, going to depspec regex for: libffi
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libffi.
 DEBUG: Requested variant i386 is not provided by port libffi.
 DEBUG: Requested variant macosx is not provided by port libffi.
 DEBUG: Searching for dependency: python26
 DEBUG: Found Dependency: receipt exists for python26
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: python26
 DEBUG: Found Dependency: receipt exists for python26
 DEBUG: Searching for dependency: python_select
 DEBUG: Found Dependency: receipt exists for python_select
 DEBUG: Searching for dependency: perl5
 DEBUG: Found Dependency: receipt exists for perl5
 DEBUG: Searching for dependency: ruby
 DEBUG: Didn't find receipt, going to depspec regex for: ruby
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port ruby.
 DEBUG: Requested variant macosx is not provided by port ruby.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant thread_hooks provides thread_hooks
 DEBUG: Searching for dependency: php5
 DEBUG: Didn't find receipt, going to depspec regex for: php5
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/php5
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/php5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port php5.
 DEBUG: Requested variant i386 is not provided by port php5.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Executing variant macosx provides macosx
 DEBUG: Executing variant apache2 provides apache2
 DEBUG: Searching for dependency: bison
 DEBUG: Didn't find receipt, going to depspec regex for: bison
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port bison.
 DEBUG: Requested variant i386 is not provided by port bison.
 DEBUG: Requested variant macosx is not provided by port bison.
 DEBUG: Searching for dependency: gsed
 DEBUG: Found Dependency: receipt exists for gsed
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: readline
 DEBUG: Found Dependency: receipt exists for readline
 DEBUG: Searching for dependency: openssl
 DEBUG: Found Dependency: receipt exists for openssl
 DEBUG: Searching for dependency: zlib
 DEBUG: Found Dependency: receipt exists for zlib
 DEBUG: Searching for dependency: ncurses
 DEBUG: Found Dependency: receipt exists for ncurses
 DEBUG: Checking for conflicts against php5
 DEBUG: Searching for dependency: php5-devel
 DEBUG: Didn't find receipt, going to depspec regex for: php5-devel
 DEBUG: Searching for dependency: php52
 DEBUG: Didn't find receipt, going to depspec regex for: php52
 DEBUG: Searching for dependency: gsed
 DEBUG: Found Dependency: receipt exists for gsed
 DEBUG: Searching for dependency: libtool
 DEBUG: Found Dependency: receipt exists for libtool
 DEBUG: Searching for dependency: libxml2
 DEBUG: Found Dependency: receipt exists for libxml2
 DEBUG: Searching for dependency: bzip2
 DEBUG: Found Dependency: receipt exists for bzip2
 DEBUG: Searching for dependency: mhash
 DEBUG: Didn't find receipt, going to depspec regex for: mhash
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mhash
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mhash
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port mhash.
 DEBUG: Requested variant i386 is not provided by port mhash.
 DEBUG: Requested variant macosx is not provided by port mhash.
 DEBUG: Searching for dependency: pcre
 DEBUG: Found Dependency: receipt exists for pcre
 DEBUG: Searching for dependency: readline
 DEBUG: Found Dependency: receipt exists for readline
 DEBUG: Searching for dependency: zlib
 DEBUG: Found Dependency: receipt exists for zlib
 DEBUG: Searching for dependency: apache2
 DEBUG: Didn't find receipt, going to depspec regex for: apache2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port apache2.
 DEBUG: Requested variant macosx is not provided by port apache2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant preforkmpm provides preforkmpm
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: autoconf213
 DEBUG: Didn't find receipt, going to depspec regex for: autoconf213
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf213
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf213
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf213.
 DEBUG: Requested variant i386 is not provided by port autoconf213.
 DEBUG: Requested variant macosx is not provided by port autoconf213.
 DEBUG: Checking for conflicts against apache2
 DEBUG: Searching for dependency: apache
 DEBUG: Didn't find receipt, going to depspec regex for: apache
 DEBUG: Searching for dependency: apr
 DEBUG: Didn't find receipt, going to depspec regex for: apr
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port apr.
 DEBUG: Requested variant i386 is not provided by port apr.
 DEBUG: Requested variant macosx is not provided by port apr.
 DEBUG: Searching for dependency: apr-util
 DEBUG: Didn't find receipt, going to depspec regex for: apr-util
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /apr-util
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /apr-util
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port apr-util.
 DEBUG: Requested variant i386 is not provided by port apr-util.
 DEBUG: Requested variant macosx is not provided by port apr-util.
 DEBUG: Searching for dependency: expat
 DEBUG: Found Dependency: receipt exists for expat
 DEBUG: Searching for dependency: openssl
 DEBUG: Found Dependency: receipt exists for openssl
 DEBUG: Searching for dependency: pcre
 DEBUG: Found Dependency: receipt exists for pcre
 DEBUG: Searching for dependency: apr
 DEBUG: Didn't find receipt, going to depspec regex for: apr
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr
 DEBUG: Searching for dependency: expat
 DEBUG: Found Dependency: receipt exists for expat
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: db46
 DEBUG: Found Dependency: receipt exists for db46
 DEBUG: Searching for dependency: sqlite3
 DEBUG: Found Dependency: receipt exists for sqlite3
 DEBUG: Searching for dependency: perl5
 DEBUG: Found Dependency: receipt exists for perl5
 DEBUG: Searching for dependency: m4
 DEBUG: Found Dependency: receipt exists for m4
 DEBUG: Searching for dependency: gawk
 DEBUG: Didn't find receipt, going to depspec regex for: gawk
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port gawk.
 DEBUG: Requested variant i386 is not provided by port gawk.
 DEBUG: Requested variant macosx is not provided by port gawk.
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: m4
 DEBUG: Found Dependency: receipt exists for m4
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: gmp
 DEBUG: Didn't find receipt, going to depspec regex for: gmp
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gmp.
 DEBUG: Requested variant i386 is not provided by port gmp.
 DEBUG: Requested variant macosx is not provided by port gmp.
 DEBUG: Searching for dependency: kdebase3
 DEBUG: Found Dependency: receipt exists for kdebase3
 DEBUG: Searching for dependency: autoconf263
 DEBUG: Found Dependency: receipt exists for autoconf263
 DEBUG: Searching for dependency: unsermake
 DEBUG: Found Dependency: receipt exists for unsermake
 DEBUG: Executing org.macports.main (xorg-libXxf86vm)
 DEBUG: Skipping completed org.macports.fetch (xorg-libXxf86vm)
 DEBUG: Skipping completed org.macports.checksum (xorg-libXxf86vm)
 DEBUG: setting option extract.cmd to /usr/bin/bzip2
 DEBUG: Skipping completed org.macports.extract (xorg-libXxf86vm)
 DEBUG: Skipping completed org.macports.patch (xorg-libXxf86vm)
 DEBUG: Skipping completed org.macports.configure (xorg-libXxf86vm)
 --->  Building xorg-libXxf86vm
 DEBUG: Executing org.macports.build (xorg-libXxf86vm)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_x11_xorg-libXxf86vm/work/libXxf86vm-1.0.2" &&
 /usr/bin/make -j2 all'
 Making all in src
 /usr/bin/make  all-am
 /bin/sh ../libtool --tag=CC   --mode=compile /usr/bin/gcc-4.2
 -DHAVE_CONFIG_H -I.   -I/opt/local/include -I/opt/local/include    -O2
 -arch x86_64 -MT XF86VMode.lo -MD -MP -MF .deps/XF86VMode.Tpo -c -o
 XF86VMode.lo XF86VMode.c
  /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I/opt/local/include
 -I/opt/local/include -O2 -arch x86_64 -MT XF86VMode.lo -MD -MP -MF
 .deps/XF86VMode.Tpo -c XF86VMode.c  -fno-common -DPIC -o .libs/XF86VMode.o
 In file included from XF86VMode.c:36:
 /opt/local/include/X11/extensions/xf86vmstr.h:1:2: warning: #warning
 "xf86vmstr.h is obsolete and may be removed in the future."
 /opt/local/include/X11/extensions/xf86vmstr.h:2:2: warning: #warning
 "include <X11/extensions/xf86vmproto.h> for the protocol defines."
 XF86VMode.c:156: error: expected declaration specifiers or '...' before
 'XF86VidModeGamma'
 XF86VMode.c: In function 'XF86VidModeSetGamma':
 XF86VMode.c:168: error: 'Gamma' undeclared (first use in this function)
 XF86VMode.c:168: error: (Each undeclared identifier is reported only once
 XF86VMode.c:168: error: for each function it appears in.)
 XF86VMode.c: At top level:
 XF86VMode.c:177: error: expected declaration specifiers or '...' before
 'XF86VidModeGamma'
 XF86VMode.c: In function 'XF86VidModeGetGamma':
 XF86VMode.c:195: error: 'Gamma' undeclared (first use in this function)
 XF86VMode.c: In function 'XF86VidModeGetModeLine':
 XF86VMode.c:208: error: expected declaration specifiers before
 'XF86VidModeModeLine'
 XF86VMode.c:233: error: invalid type argument of '->'
 XF86VMode.c:234: error: invalid type argument of '->'
 XF86VMode.c:235: error: invalid type argument of '->'
 XF86VMode.c:236: error: invalid type argument of '->'
 XF86VMode.c:237: error: invalid type argument of '->'
 XF86VMode.c:238: error: invalid type argument of '->'
 XF86VMode.c:239: error: invalid type argument of '->'
 XF86VMode.c:240: error: invalid type argument of '->'
 XF86VMode.c:241: error: invalid type argument of '->'
 XF86VMode.c:242: error: invalid type argument of '->'
 XF86VMode.c:243: error: invalid type argument of '->'
 XF86VMode.c:252: error: invalid type argument of '->'
 XF86VMode.c:253: error: invalid type argument of '->'
 XF86VMode.c:254: error: invalid type argument of '->'
 XF86VMode.c:255: error: invalid type argument of '->'
 XF86VMode.c:256: error: invalid type argument of '->'
 XF86VMode.c:257: error: invalid type argument of '->'
 XF86VMode.c:258: error: invalid type argument of '->'
 XF86VMode.c:259: error: invalid type argument of '->'
 XF86VMode.c:260: error: invalid type argument of '->'
 XF86VMode.c:261: error: invalid type argument of '->'
 XF86VMode.c:262: error: invalid type argument of '->'
 XF86VMode.c:265: error: invalid type argument of '->'
 XF86VMode.c:266: error: invalid type argument of '->'
 XF86VMode.c:266: error: invalid type argument of '->'
 XF86VMode.c:267: error: invalid type argument of '->'
 XF86VMode.c:268: error: invalid type argument of '->'
 XF86VMode.c:271: error: invalid type argument of '->'
 XF86VMode.c:271: error: invalid type argument of '->'
 XF86VMode.c:273: error: invalid type argument of '->'
 XF86VMode.c: In function 'XF86VidModeGetAllModeLines':
 XF86VMode.c:285: error: expected declaration specifiers before
 'XF86VidModeModeInfo'
 XF86VMode.c:290: error: 'XF86VidModeModeInfo' undeclared (first use in
 this function)
 XF86VMode.c:290: error: 'mdinfptr' undeclared (first use in this function)
 XF86VMode.c:290: error: 'modelines' undeclared (first use in this
 function)
 XF86VMode.c:329: error: expected expression before ')' token
 XF86VMode.c:339: error: expected expression before ')' token
 XF86VMode.c:410: error: invalid type argument of 'unary *'
 XF86VMode.c: In function 'XF86VidModeAddModeLine':
 XF86VMode.c:446: error: expected declaration specifiers before
 'XF86VidModeModeInfo'
 XF86VMode.c:447: error: expected declaration specifiers before
 'XF86VidModeModeInfo'
 XF86VMode.c:463: error: invalid type argument of '->'
 XF86VMode.c:464: error: invalid type argument of '->'
 XF86VMode.c:465: error: invalid type argument of '->'
 XF86VMode.c:466: error: invalid type argument of '->'
 XF86VMode.c:467: error: invalid type argument of '->'
 XF86VMode.c:468: error: invalid type argument of '->'
 XF86VMode.c:469: error: invalid type argument of '->'
 XF86VMode.c:470: error: invalid type argument of '->'
 XF86VMode.c:471: error: invalid type argument of '->'
 XF86VMode.c:472: error: invalid type argument of '->'
 XF86VMode.c:473: error: invalid type argument of '->'
 XF86VMode.c:474: warning: comparison between pointer and integer
 XF86VMode.c:475: error: invalid type argument of '->'
 XF86VMode.c:476: error: invalid type argument of '->'
 XF86VMode.c:477: error: invalid type argument of '->'
 XF86VMode.c:478: error: invalid type argument of '->'
 XF86VMode.c:479: error: invalid type argument of '->'
 XF86VMode.c:480: error: invalid type argument of '->'
 XF86VMode.c:481: error: invalid type argument of '->'
 XF86VMode.c:482: error: invalid type argument of '->'
 XF86VMode.c:483: error: invalid type argument of '->'
 XF86VMode.c:484: error: invalid type argument of '->'
 XF86VMode.c:497: error: invalid type argument of '->'
 XF86VMode.c:498: error: invalid type argument of '->'
 XF86VMode.c:499: error: invalid type argument of '->'
 XF86VMode.c:499: error: invalid type argument of '->'
 XF86VMode.c:507: error: invalid type argument of '->'
 XF86VMode.c:508: error: invalid type argument of '->'
 XF86VMode.c:509: error: invalid type argument of '->'
 XF86VMode.c:510: error: invalid type argument of '->'
 XF86VMode.c:511: error: invalid type argument of '->'
 XF86VMode.c:512: error: invalid type argument of '->'
 XF86VMode.c:513: error: invalid type argument of '->'
 XF86VMode.c:514: error: invalid type argument of '->'
 XF86VMode.c:515: error: invalid type argument of '->'
 XF86VMode.c:516: error: invalid type argument of '->'
 XF86VMode.c:517: error: invalid type argument of '->'
 XF86VMode.c:518: error: invalid type argument of '->'
 XF86VMode.c:519: warning: comparison between pointer and integer
 XF86VMode.c:520: error: invalid type argument of '->'
 XF86VMode.c:521: error: invalid type argument of '->'
 XF86VMode.c:522: error: invalid type argument of '->'
 XF86VMode.c:523: error: invalid type argument of '->'
 XF86VMode.c:524: error: invalid type argument of '->'
 XF86VMode.c:525: error: invalid type argument of '->'
 XF86VMode.c:526: error: invalid type argument of '->'
 XF86VMode.c:527: error: invalid type argument of '->'
 XF86VMode.c:528: error: invalid type argument of '->'
 XF86VMode.c:529: error: invalid type argument of '->'
 XF86VMode.c:530: error: invalid type argument of '->'
 XF86VMode.c:544: error: invalid type argument of '->'
 XF86VMode.c:545: error: invalid type argument of '->'
 XF86VMode.c:546: error: invalid type argument of '->'
 XF86VMode.c:546: error: invalid type argument of '->'
 XF86VMode.c: In function 'XF86VidModeDeleteModeLine':
 XF86VMode.c:559: error: expected declaration specifiers before
 'XF86VidModeModeInfo'
 XF86VMode.c:575: error: invalid type argument of '->'
 XF86VMode.c:576: error: invalid type argument of '->'
 XF86VMode.c:577: error: invalid type argument of '->'
 XF86VMode.c:578: error: invalid type argument of '->'
 XF86VMode.c:579: error: invalid type argument of '->'
 XF86VMode.c:580: error: invalid type argument of '->'
 XF86VMode.c:581: error: invalid type argument of '->'
 XF86VMode.c:582: error: invalid type argument of '->'
 XF86VMode.c:583: error: invalid type argument of '->'
 XF86VMode.c:584: error: invalid type argument of '->'
 XF86VMode.c:585: error: invalid type argument of '->'
 XF86VMode.c:586: error: invalid type argument of '->'
 XF86VMode.c:587: error: invalid type argument of '->'
 XF86VMode.c:588: error: invalid type argument of '->'
 XF86VMode.c:588: error: invalid type argument of '->'
 XF86VMode.c:596: error: invalid type argument of '->'
 XF86VMode.c:597: error: invalid type argument of '->'
 XF86VMode.c:598: error: invalid type argument of '->'
 XF86VMode.c:599: error: invalid type argument of '->'
 XF86VMode.c:600: error: invalid type argument of '->'
 XF86VMode.c:601: error: invalid type argument of '->'
 XF86VMode.c:602: error: invalid type argument of '->'
 XF86VMode.c:603: error: invalid type argument of '->'
 XF86VMode.c:604: error: invalid type argument of '->'
 XF86VMode.c:605: error: invalid type argument of '->'
 XF86VMode.c:606: error: invalid type argument of '->'
 XF86VMode.c:607: error: invalid type argument of '->'
 XF86VMode.c:608: error: invalid type argument of '->'
 XF86VMode.c:609: error: invalid type argument of '->'
 XF86VMode.c:610: error: invalid type argument of '->'
 XF86VMode.c:610: error: invalid type argument of '->'
 XF86VMode.c: In function 'XF86VidModeModModeLine':
 XF86VMode.c:623: error: expected declaration specifiers before
 'XF86VidModeModeLine'
 XF86VMode.c:639: error: invalid type argument of '->'
 XF86VMode.c:640: error: invalid type argument of '->'
 XF86VMode.c:641: error: invalid type argument of '->'
 XF86VMode.c:642: error: invalid type argument of '->'
 XF86VMode.c:643: error: invalid type argument of '->'
 XF86VMode.c:644: error: invalid type argument of '->'
 XF86VMode.c:645: error: invalid type argument of '->'
 XF86VMode.c:646: error: invalid type argument of '->'
 XF86VMode.c:647: error: invalid type argument of '->'
 XF86VMode.c:648: error: invalid type argument of '->'
 XF86VMode.c:649: error: invalid type argument of '->'
 XF86VMode.c:650: error: invalid type argument of '->'
 XF86VMode.c:651: error: invalid type argument of '->'
 XF86VMode.c:651: error: invalid type argument of '->'
 XF86VMode.c:659: error: invalid type argument of '->'
 XF86VMode.c:660: error: invalid type argument of '->'
 XF86VMode.c:661: error: invalid type argument of '->'
 XF86VMode.c:662: error: invalid type argument of '->'
 XF86VMode.c:663: error: invalid type argument of '->'
 XF86VMode.c:664: error: invalid type argument of '->'
 XF86VMode.c:665: error: invalid type argument of '->'
 XF86VMode.c:666: error: invalid type argument of '->'
 XF86VMode.c:667: error: invalid type argument of '->'
 XF86VMode.c:668: error: invalid type argument of '->'
 XF86VMode.c:669: error: invalid type argument of '->'
 XF86VMode.c:670: error: invalid type argument of '->'
 XF86VMode.c:671: error: invalid type argument of '->'
 XF86VMode.c:672: error: invalid type argument of '->'
 XF86VMode.c:672: error: invalid type argument of '->'
 XF86VMode.c: In function 'XF86VidModeValidateModeLine':
 XF86VMode.c:685: error: expected declaration specifiers before
 'XF86VidModeModeInfo'
 XF86VMode.c:703: error: invalid type argument of '->'
 XF86VMode.c:704: error: invalid type argument of '->'
 XF86VMode.c:705: error: invalid type argument of '->'
 XF86VMode.c:706: error: invalid type argument of '->'
 XF86VMode.c:707: error: invalid type argument of '->'
 XF86VMode.c:708: error: invalid type argument of '->'
 XF86VMode.c:709: error: invalid type argument of '->'
 XF86VMode.c:710: error: invalid type argument of '->'
 XF86VMode.c:711: error: invalid type argument of '->'
 XF86VMode.c:712: error: invalid type argument of '->'
 XF86VMode.c:713: error: invalid type argument of '->'
 XF86VMode.c:714: error: invalid type argument of '->'
 XF86VMode.c:715: error: invalid type argument of '->'
 XF86VMode.c:716: error: invalid type argument of '->'
 XF86VMode.c:716: error: invalid type argument of '->'
 XF86VMode.c:724: error: invalid type argument of '->'
 XF86VMode.c:725: error: invalid type argument of '->'
 XF86VMode.c:726: error: invalid type argument of '->'
 XF86VMode.c:727: error: invalid type argument of '->'
 XF86VMode.c:728: error: invalid type argument of '->'
 XF86VMode.c:729: error: invalid type argument of '->'
 XF86VMode.c:730: error: invalid type argument of '->'
 XF86VMode.c:731: error: invalid type argument of '->'
 XF86VMode.c:732: error: invalid type argument of '->'
 XF86VMode.c:733: error: invalid type argument of '->'
 XF86VMode.c:734: error: invalid type argument of '->'
 XF86VMode.c:735: error: invalid type argument of '->'
 XF86VMode.c:736: error: invalid type argument of '->'
 XF86VMode.c:737: error: invalid type argument of '->'
 XF86VMode.c:738: error: invalid type argument of '->'
 XF86VMode.c:738: error: invalid type argument of '->'
 XF86VMode.c: In function 'XF86VidModeSwitchToMode':
 XF86VMode.c:778: error: expected declaration specifiers before
 'XF86VidModeModeInfo'
 XF86VMode.c:811: error: invalid type argument of '->'
 XF86VMode.c:812: error: invalid type argument of '->'
 XF86VMode.c:813: error: invalid type argument of '->'
 XF86VMode.c:814: error: invalid type argument of '->'
 XF86VMode.c:815: error: invalid type argument of '->'
 XF86VMode.c:816: error: invalid type argument of '->'
 XF86VMode.c:817: error: invalid type argument of '->'
 XF86VMode.c:818: error: invalid type argument of '->'
 XF86VMode.c:819: error: invalid type argument of '->'
 XF86VMode.c:820: error: invalid type argument of '->'
 XF86VMode.c:824: error: invalid type argument of '->'
 XF86VMode.c:825: error: invalid type argument of '->'
 XF86VMode.c:826: error: invalid type argument of '->'
 XF86VMode.c:827: error: invalid type argument of '->'
 XF86VMode.c:827: error: invalid type argument of '->'
 XF86VMode.c:836: error: invalid type argument of '->'
 XF86VMode.c:837: error: invalid type argument of '->'
 XF86VMode.c:838: error: invalid type argument of '->'
 XF86VMode.c:839: error: invalid type argument of '->'
 XF86VMode.c:840: error: invalid type argument of '->'
 XF86VMode.c:841: error: invalid type argument of '->'
 XF86VMode.c:842: error: invalid type argument of '->'
 XF86VMode.c:843: error: invalid type argument of '->'
 XF86VMode.c:844: error: invalid type argument of '->'
 XF86VMode.c:845: error: invalid type argument of '->'
 XF86VMode.c:846: error: invalid type argument of '->'
 XF86VMode.c:850: error: invalid type argument of '->'
 XF86VMode.c:851: error: invalid type argument of '->'
 XF86VMode.c:852: error: invalid type argument of '->'
 XF86VMode.c:853: error: invalid type argument of '->'
 XF86VMode.c:853: error: invalid type argument of '->'
 XF86VMode.c: In function 'XF86VidModeGetMonitor':
 XF86VMode.c:889: error: expected declaration specifiers before
 'XF86VidModeMonitor'
 XF86VMode.c:909: error: invalid type argument of '->'
 XF86VMode.c:910: error: invalid type argument of '->'
 XF86VMode.c:915: error: invalid type argument of '->'
 XF86VMode.c:921: error: invalid type argument of '->'
 XF86VMode.c:924: error: invalid type argument of '->'
 XF86VMode.c:927: error: invalid type argument of '->'
 XF86VMode.c:928: error: invalid type argument of '->'
 XF86VMode.c:932: error: invalid type argument of '->'
 XF86VMode.c:934: error: invalid type argument of '->'
 XF86VMode.c:934: error: 'XF86VidModeSyncRange' undeclared (first use in
 this function)
 XF86VMode.c:938: error: invalid type argument of '->'
 XF86VMode.c:939: error: invalid type argument of '->'
 XF86VMode.c:940: error: invalid type argument of '->'
 XF86VMode.c:941: error: invalid type argument of '->'
 XF86VMode.c:944: error: invalid type argument of '->'
 XF86VMode.c:947: error: invalid type argument of '->'
 XF86VMode.c:948: error: invalid type argument of '->'
 XF86VMode.c:949: error: invalid type argument of '->'
 XF86VMode.c:950: error: invalid type argument of '->'
 XF86VMode.c:951: error: invalid type argument of '->'
 XF86VMode.c:956: error: invalid type argument of '->'
 XF86VMode.c:957: error: invalid type argument of '->'
 XF86VMode.c:961: error: invalid type argument of '->'
 XF86VMode.c:962: error: invalid type argument of '->'
 XF86VMode.c:965: error: invalid type argument of '->'
 XF86VMode.c:967: error: invalid type argument of '->'
 make[2]: *** [XF86VMode.lo] Error 1
 make[1]: *** [all] Error 2
 make: *** [all-recursive] Error 1
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_x11_xorg-libXxf86vm/work/libXxf86vm-1.0.2" &&
 /usr/bin/make -j2 all " returned error 2
 Command output: XF86VMode.c:889: error: expected declaration specifiers
 before 'XF86VidModeMonitor'
 XF86VMode.c:909: error: invalid type argument of '->'
 XF86VMode.c:910: error: invalid type argument of '->'
 XF86VMode.c:915: error: invalid type argument of '->'
 XF86VMode.c:921: error: invalid type argument of '->'
 XF86VMode.c:924: error: invalid type argument of '->'
 XF86VMode.c:927: error: invalid type argument of '->'
 XF86VMode.c:928: error: invalid type argument of '->'
 XF86VMode.c:932: error: invalid type argument of '->'
 XF86VMode.c:934: error: invalid type argument of '->'
 XF86VMode.c:934: error: 'XF86VidModeSyncRange' undeclared (first use in
 this function)
 XF86VMode.c:938: error: invalid type argument of '->'
 XF86VMode.c:939: error: invalid type argument of '->'
 XF86VMode.c:940: error: invalid type argument of '->'
 XF86VMode.c:941: error: invalid type argument of '->'
 XF86VMode.c:944: error: invalid type argument of '->'
 XF86VMode.c:947: error: invalid type argument of '->'
 XF86VMode.c:948: error: invalid type argument of '->'
 XF86VMode.c:949: error: invalid type argument of '->'
 XF86VMode.c:950: error: invalid type argument of '->'
 XF86VMode.c:951: error: invalid type argument of '->'
 XF86VMode.c:956: error: invalid type argument of '->'
 XF86VMode.c:957: error: invalid type argument of '->'
 XF86VMode.c:961: error: invalid type argument of '->'
 XF86VMode.c:962: error: invalid type argument of '->'
 XF86VMode.c:965: error: invalid type argument of '->'
 XF86VMode.c:967: error: invalid type argument of '->'
 make[2]: *** [XF86VMode.lo] Error 1
 make[1]: *** [all] Error 2
 make: *** [all-recursive] Error 1

 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_x11_xorg-libXxf86vm/work/libXxf86vm-1.0.2" &&
 /usr/bin/make -j2 all " returned error 2
 Command output: XF86VMode.c:889: error: expected declaration specifiers
 before 'XF86VidModeMonitor'
 XF86VMode.c:909: error: invalid type argument of '->'
 XF86VMode.c:910: error: invalid type argument of '->'
 XF86VMode.c:915: error: invalid type argument of '->'
 XF86VMode.c:921: error: invalid type argument of '->'
 XF86VMode.c:924: error: invalid type argument of '->'
 XF86VMode.c:927: error: invalid type argument of '->'
 XF86VMode.c:928: error: invalid type argument of '->'
 XF86VMode.c:932: error: invalid type argument of '->'
 XF86VMode.c:934: error: invalid type argument of '->'
 XF86VMode.c:934: error: 'XF86VidModeSyncRange' undeclared (first use in
 this function)
 XF86VMode.c:938: error: invalid type argument of '->'
 XF86VMode.c:939: error: invalid type argument of '->'
 XF86VMode.c:940: error: invalid type argument of '->'
 XF86VMode.c:941: error: invalid type argument of '->'
 XF86VMode.c:944: error: invalid type argument of '->'
 XF86VMode.c:947: error: invalid type argument of '->'
 XF86VMode.c:948: error: invalid type argument of '->'
 XF86VMode.c:949: error: invalid type argument of '->'
 XF86VMode.c:950: error: invalid type argument of '->'
 XF86VMode.c:951: error: invalid type argument of '->'
 XF86VMode.c:956: error: invalid type argument of '->'
 XF86VMode.c:957: error: invalid type argument of '->'
 XF86VMode.c:961: error: invalid type argument of '->'
 XF86VMode.c:962: error: invalid type argument of '->'
 XF86VMode.c:965: error: invalid type argument of '->'
 XF86VMode.c:967: error: invalid type argument of '->'
 make[2]: *** [XF86VMode.lo] Error 1
 make[1]: *** [all] Error 2
 make: *** [all-recursive] Error 1

     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for xorg-libXxf86vm):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: The following dependencies failed to build: kdenetwork3 xorg-
 libXxf86vm kdepim3 gpgme gnupg libgpg-error pth kdeaccessibility3 opensync
 py26-gobject libffi py26-numeric swig bison php5 apache2 apr apr-util
 autoconf213 gawk mhash ruby kdeutils3 gmp
 Error: Status 1 encountered during processing.

 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/21782>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list