[MacPorts] #21794: dryrun and archivemode issue

[MacPorts]

#21794: dryrun and archivemode issue
----------------------------------------+-----------------------------------
 Reporter:  david.osguthorpe@…          |       Owner:  macports-tickets@…                   
     Type:  defect                      |      Status:  new                                  
 Priority:  Normal                      |   Milestone:                                       
Component:  base                        |     Version:  1.8.0                                
 Keywords:                              |        Port:                                       
----------------------------------------+-----------------------------------
Description changed by macsforever2000@…:

Old description:

> with archivemode set to yes
>
> doing port -d -y install in a directory works
> but running this command a second time gives the error
>
> {{{
> Error: Requested variants "+darwin" do not match original selection "".
> Please use the same variants again, perform 'port clean VTK' or specify
> the force option (-f).
> }}}
>
> this appears to be because the statefile has been written with
>
> {{{
> target: org.macports.unarchive
> }}}
>
> but no variants have been set
>
> doing port -d clean fixes this - by cleaning the statefile
> (although note that the creation of work directories/statefiles also
> occurs for dependents which are not cleaned)
>
> the explanation is as follows
>
> the current dryrun implementation actually creates files/directories
>
> it creates work directories and a null statefile because in target_run
> at the begining the open_statefile is executed which creates the work
> directory
> and statefile
>
> {{{
>     if {[ditem_key $ditem state] != "no"} {
>         set target_state_fd [open_statefile]
>     }
> }}}
>
> with archivemode set to yes this adds unarchive as a dependent
>
> again in target_run there is a call to the init proc of the target
> which is actually run in dryrun mode
>
> {{{
>         if {[ditem_contains $ditem init]} {
>             set result [catch {[ditem_key $ditem init] $targetname}
> errstr]
>         }
> }}}
>
> this is not protected by the dryrun option so is executed
>
> in package1.0/portunarchive.tcl the init proc will write to the statefile
> if it needs to skip the unarchive main - which it does if there is no
> archive - which in general there will be
> for a dryrun
>
> {{{
>         # Skip unarchive target by setting state
>         if {$skipped == 1} {                write_statefile target
> "org.macports.unarchive" $target_state_fd
>         }
> }}}
>
> this non-null statefile which has not had the variants set correctly then
> causes the
> second run of port -d -y install to fail
>
> a possible fixup is to protect the portunarchive write by the dryrun
> option - and indeed this does
> prevent the error described initially (a null statefile doesnt cause the
> problem)
>
> however its not clear to me why either the statefile is initially written
> or the init proc is being run in dryrun mode
> not doing these would also fix the problem
>
> ( the portarchive init proc also attempts to write the statefile but this
> will not be done normally because
> this is not skipped as no destroot has been created in dryrun mode)

New description:

 with archivemode set to yes

 doing port -d -y install in a directory works
 but running this command a second time gives the error

 {{{
 Error: Requested variants "+darwin" do not match original selection "".
 Please use the same variants again, perform 'port clean VTK' or specify
 the force option (-f).
 }}}

 this appears to be because the statefile has been written with

 {{{
 target: org.macports.unarchive
 }}}

 but no variants have been set

 doing port -d clean fixes this - by cleaning the statefile
 (although note that the creation of work directories/statefiles also
 occurs for dependents which are not cleaned)

 the explanation is as follows

 the current dryrun implementation actually creates files/directories

 it creates work directories and a null statefile because in target_run
 at the begining the open_statefile is executed which creates the work
 directory
 and statefile

 {{{
     if {[ditem_key $ditem state] != "no"} {
         set target_state_fd [open_statefile]
     }
 }}}

 with archivemode set to yes this adds unarchive as a dependent

 again in target_run there is a call to the init proc of the target
 which is actually run in dryrun mode

 {{{
         if {[ditem_contains $ditem init]} {
             set result [catch {[ditem_key $ditem init] $targetname}
 errstr]
         }
 }}}

 this is not protected by the dryrun option so is executed

 in package1.0/portunarchive.tcl the init proc will write to the statefile
 if it needs to skip the unarchive main - which it does if there is no
 archive - which in general there will be
 for a dryrun

 {{{
         # Skip unarchive target by setting state
         if {$skipped == 1} {
                 write_statefile target "org.macports.unarchive"
 $target_state_fd
         }
 }}}

 this non-null statefile which has not had the variants set correctly then
 causes the
 second run of port -d -y install to fail

 a possible fixup is to protect the portunarchive write by the dryrun
 option - and indeed this does
 prevent the error described initially (a null statefile doesnt cause the
 problem)

 however its not clear to me why either the statefile is initially written
 or the init proc is being run in dryrun mode
 not doing these would also fix the problem

 ( the portarchive init proc also attempts to write the statefile but this
 will not be done normally because
 this is not skipped as no destroot has been created in dryrun mode)

--

-- 
Ticket URL: <http://trac.macports.org/ticket/21794#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS