[MacPorts] #22204: "port install rpm" failes
MacPorts
noreply at macports.org
Thu Oct 22 08:54:18 PDT 2009
#22204: "port install rpm" failes
-------------------------------+--------------------------------------------
Reporter: borschel@… | Owner: n3npq@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.1
Keywords: | Port: rpm
-------------------------------+--------------------------------------------
Changes (by macsforever2000@…):
* owner: macports-tickets@… => n3npq@…
* port: => rpm
Old description:
> it appears, that, although successfully comleting the db3 make, the
> packages does not produce the later required db3/libdb-4.5.la
>
> here is the debug output
>
> sudo port -d install rpm
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/rpm
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/rpm
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant i386 is not provided by port rpm.
> DEBUG: Requested variant macosx is not provided by port rpm.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: readline 6.0.000_2 exists in the ports tree
> DEBUG: readline 6.0.000_2 +darwin is the latest installed
> DEBUG: readline 6.0.000_2 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port readline.
> DEBUG: Requested variant macosx is not provided by port readline.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0 is the latest installed
> DEBUG: ncurses 5.7_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncurses.
> DEBUG: Requested variant i386 is not provided by port ncurses.
> DEBUG: Requested variant macosx is not provided by port ncurses.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0 is the latest installed
> DEBUG: ncursesw 5.7_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncursesw.
> DEBUG: Requested variant i386 is not provided by port ncursesw.
> DEBUG: Requested variant macosx is not provided by port ncursesw.
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_4 exists in the ports tree
> DEBUG: gettext 0.17_4 is the latest installed
> DEBUG: gettext 0.17_4 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gettext.
> DEBUG: Requested variant i386 is not provided by port gettext.
> DEBUG: Requested variant macosx is not provided by port gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.13_0 exists in the ports tree
> DEBUG: libiconv 1.13_0 is the latest installed
> DEBUG: libiconv 1.13_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libiconv.
> DEBUG: Requested variant i386 is not provided by port libiconv.
> DEBUG: Requested variant macosx is not provided by port libiconv.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.4_0 exists in the ports tree
> DEBUG: gperf 3.0.4_0 is the latest installed
> DEBUG: gperf 3.0.4_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gperf.
> DEBUG: Requested variant i386 is not provided by port gperf.
> DEBUG: Requested variant macosx is not provided by port gperf.
> DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0 is the latest installed
> DEBUG: expat 2.0.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port expat.
> DEBUG: Requested variant i386 is not provided by port expat.
> DEBUG: Requested variant macosx is not provided by port expat.
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: popt 1.15_0 exists in the ports tree
> DEBUG: popt 1.15_0 is the latest installed
> DEBUG: popt 1.15_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port popt.
> DEBUG: Requested variant i386 is not provided by port popt.
> DEBUG: Requested variant macosx is not provided by port popt.
> DEBUG: No need to upgrade! popt 1.15_0 >= popt 1.15_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: sqlite3 3.6.18_0 exists in the ports tree
> DEBUG: sqlite3 3.6.18_0 is the latest installed
> DEBUG: sqlite3 3.6.18_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port sqlite3.
> DEBUG: Requested variant i386 is not provided by port sqlite3.
> DEBUG: Requested variant macosx is not provided by port sqlite3.
> DEBUG: No need to upgrade! sqlite3 3.6.18_0 >= sqlite3 3.6.18_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/neon
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: neon 0.28.6_0 exists in the ports tree
> DEBUG: neon 0.28.6_0 is the latest installed
> DEBUG: neon 0.28.6_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/neon
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port neon.
> DEBUG: Requested variant i386 is not provided by port neon.
> DEBUG: Requested variant macosx is not provided by port neon.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: openssl 0.9.8k_0 exists in the ports tree
> DEBUG: openssl 0.9.8k_0 +darwin is the latest installed
> DEBUG: openssl 0.9.8k_0 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port openssl.
> DEBUG: Requested variant macosx is not provided by port openssl.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: zlib 1.2.3_3 exists in the ports tree
> DEBUG: zlib 1.2.3_3 is the latest installed
> DEBUG: zlib 1.2.3_3 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port zlib.
> DEBUG: Requested variant i386 is not provided by port zlib.
> DEBUG: Requested variant macosx is not provided by port zlib.
> DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
> DEBUG: No need to upgrade! openssl 0.9.8k_0 >= openssl 0.9.8k_0
> DEBUG: No need to upgrade! neon 0.28.6_0 >= neon 0.28.6_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python24
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: python24 2.4.6_4 exists in the ports tree
> DEBUG: python24 2.4.6_4 +darwin+darwin_9+macosx is the latest installed
> DEBUG: python24 2.4.6_4 +darwin+darwin_9+macosx is active
> DEBUG: Merging existing variants darwin darwin_9 macosx into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python24
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port python24.
> DEBUG: Executing variant macosx provides macosx
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Executing variant darwin_9 provides darwin_9
> DEBUG: No need to upgrade! python24 2.4.6_4 >= python24 2.4.6_4
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5.8 5.8.9_3 exists in the ports tree
> DEBUG: perl5.8 5.8.9_3 is the latest installed
> DEBUG: perl5.8 5.8.9_3 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port perl5.8.
> DEBUG: Requested variant i386 is not provided by port perl5.8.
> DEBUG: Requested variant macosx is not provided by port perl5.8.
> DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/beecrypt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: beecrypt 4.2.1_0 exists in the ports tree
> DEBUG: beecrypt 4.2.1_0 is the latest installed
> DEBUG: beecrypt 4.2.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/beecrypt
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port beecrypt.
> DEBUG: Requested variant i386 is not provided by port beecrypt.
> DEBUG: Requested variant macosx is not provided by port beecrypt.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: icu 4.3.1_0 exists in the ports tree
> DEBUG: icu 4.3.1_0 is the latest installed
> DEBUG: icu 4.3.1_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port icu.
> DEBUG: Requested variant i386 is not provided by port icu.
> DEBUG: Requested variant macosx is not provided by port icu.
> DEBUG: No need to upgrade! icu 4.3.1_0 >= icu 4.3.1_0
> DEBUG: No need to upgrade! beecrypt 4.2.1_0 >= beecrypt 4.2.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gzip 1.3.12_0 exists in the ports tree
> DEBUG: gzip 1.3.12_0 is the latest installed
> DEBUG: gzip 1.3.12_0 is active
> DEBUG: Merging existing variants into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port gzip.
> DEBUG: Requested variant i386 is not provided by port gzip.
> DEBUG: Requested variant macosx is not provided by port gzip.
> DEBUG: No need to upgrade! gzip 1.3.12_0 >= gzip 1.3.12_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: bzip2 1.0.5_3 exists in the ports tree
> DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
> DEBUG: bzip2 1.0.5_3 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port bzip2.
> DEBUG: Requested variant macosx is not provided by port bzip2.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
> ---> Computing dependencies for rpm
> DEBUG: Searching for dependency: readline
> DEBUG: Found Dependency: receipt exists for readline
> DEBUG: Searching for dependency: gettext
> DEBUG: Found Dependency: receipt exists for gettext
> DEBUG: Searching for dependency: popt
> DEBUG: Found Dependency: receipt exists for popt
> DEBUG: Searching for dependency: sqlite3
> DEBUG: Found Dependency: receipt exists for sqlite3
> DEBUG: Searching for dependency: expat
> DEBUG: Found Dependency: receipt exists for expat
> DEBUG: Searching for dependency: neon
> DEBUG: Found Dependency: receipt exists for neon
> DEBUG: Searching for dependency: python24
> DEBUG: Found Dependency: receipt exists for python24
> DEBUG: Searching for dependency: perl5.8
> DEBUG: Found Dependency: receipt exists for perl5.8
> DEBUG: Searching for dependency: readline
> DEBUG: Found Dependency: receipt exists for readline
> DEBUG: Searching for dependency: beecrypt
> DEBUG: Found Dependency: receipt exists for beecrypt
> DEBUG: Searching for dependency: libiconv
> DEBUG: Found Dependency: receipt exists for libiconv
> DEBUG: Searching for dependency: gettext
> DEBUG: Found Dependency: receipt exists for gettext
> DEBUG: Searching for dependency: openssl
> DEBUG: Found Dependency: receipt exists for openssl
> DEBUG: Searching for dependency: gzip
> DEBUG: Found Dependency: receipt exists for gzip
> DEBUG: Searching for dependency: bzip2
> DEBUG: Found Dependency: receipt exists for bzip2
> DEBUG: Searching for dependency: unzip
> DEBUG: Didn't find receipt, going to depspec regex for: unzip
> DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
> DEBUG: Executing org.macports.main (rpm)
> DEBUG: Skipping completed org.macports.fetch (rpm)
> DEBUG: Skipping completed org.macports.checksum (rpm)
> DEBUG: Skipping completed org.macports.extract (rpm)
> DEBUG: Skipping completed org.macports.patch (rpm)
> DEBUG: Skipping completed org.macports.configure (rpm)
> ---> Building rpm
> DEBUG: Executing org.macports.build (rpm)
> DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9"
> && /usr/bin/gnumake -j1 all'
> /usr/bin/gnumake all-recursive
> Making all in po
> gnumake[2]: Nothing to be done for `all'.
> Making all in misc
> gnumake[2]: Nothing to be done for `all'.
> Making all in zlib
> /usr/bin/gnumake all-am
> gnumake[3]: Nothing to be done for `all-am'.
> Making all in file
> /usr/bin/gnumake all-recursive
> Making all in src
> /usr/bin/gnumake all-am
> gnumake[5]: Nothing to be done for `all-am'.
> Making all in magic
> gnumake[4]: Nothing to be done for `all'.
> Making all in doc
> gnumake[4]: Nothing to be done for `all'.
> Making all in python
> gnumake[4]: Nothing to be done for `all'.
> gnumake[4]: Nothing to be done for `all-am'.
> Making all in db3
> gnumake[2]: Nothing to be done for `all'.
> Making all in syck
> Making all in lib
> /usr/bin/gnumake all-am
> gnumake[4]: Nothing to be done for `all-am'.
> gnumake[3]: Nothing to be done for `all-am'.
> Making all in lua
> gnumake[2]: Nothing to be done for `all'.
> Making all in rpmio
> gnumake[2]: Nothing to be done for `all'.
> Making all in rpmdb
> /usr/bin/gnumake all-am
> sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la >
> ../db3/libdb.la
> /bin/sh: ../db3/libdb-4.5.la: No such file or directory
> gnumake[3]: *** [../db3/libdb.la] Error 1
> gnumake[2]: *** [all] Error 2
> gnumake[1]: *** [all-recursive] Error 1
> gnumake: *** [all] Error 2
> Error: Target org.macports.build returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9"
> && /usr/bin/gnumake -j1 all " returned error 2
> Command output: /usr/bin/gnumake all-recursive
> Making all in src
> /usr/bin/gnumake all-am
> gnumake[5]: Nothing to be done for `all-am'.
> Making all in magic
> gnumake[4]: Nothing to be done for `all'.
> Making all in doc
> gnumake[4]: Nothing to be done for `all'.
> Making all in python
> gnumake[4]: Nothing to be done for `all'.
> gnumake[4]: Nothing to be done for `all-am'.
> Making all in db3
> gnumake[2]: Nothing to be done for `all'.
> Making all in syck
> Making all in lib
> /usr/bin/gnumake all-am
> gnumake[4]: Nothing to be done for `all-am'.
> gnumake[3]: Nothing to be done for `all-am'.
> Making all in lua
> gnumake[2]: Nothing to be done for `all'.
> Making all in rpmio
> gnumake[2]: Nothing to be done for `all'.
> Making all in rpmdb
> /usr/bin/gnumake all-am
> sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la >
> ../db3/libdb.la
> /bin/sh: ../db3/libdb-4.5.la: No such file or directory
> gnumake[3]: *** [../db3/libdb.la] Error 1
> gnumake[2]: *** [all] Error 2
> gnumake[1]: *** [all-recursive] Error 1
> gnumake: *** [all] Error 2
>
> DEBUG: Backtrace: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9"
> && /usr/bin/gnumake -j1 all " returned error 2
> Command output: /usr/bin/gnumake all-recursive
> Making all in src
> /usr/bin/gnumake all-am
> gnumake[5]: Nothing to be done for `all-am'.
> Making all in magic
> gnumake[4]: Nothing to be done for `all'.
> Making all in doc
> gnumake[4]: Nothing to be done for `all'.
> Making all in python
> gnumake[4]: Nothing to be done for `all'.
> gnumake[4]: Nothing to be done for `all-am'.
> Making all in db3
> gnumake[2]: Nothing to be done for `all'.
> Making all in syck
> Making all in lib
> /usr/bin/gnumake all-am
> gnumake[4]: Nothing to be done for `all-am'.
> gnumake[3]: Nothing to be done for `all-am'.
> Making all in lua
> gnumake[2]: Nothing to be done for `all'.
> Making all in rpmio
> gnumake[2]: Nothing to be done for `all'.
> Making all in rpmdb
> /usr/bin/gnumake all-am
> sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la >
> ../db3/libdb.la
> /bin/sh: ../db3/libdb-4.5.la: No such file or directory
> gnumake[3]: *** [../db3/libdb.la] Error 1
> gnumake[2]: *** [all] Error 2
> gnumake[1]: *** [all-recursive] Error 1
> gnumake: *** [all] Error 2
>
> while executing
> "command_exec build"
> (procedure "portbuild::build_main" line 9)
> invoked from within
> "$procedure $targetname"
> Warning: the following items did not execute (for rpm):
> org.macports.activate org.macports.build org.macports.destroot
> org.macports.install
> Error: Status 1 encountered during processing.
New description:
it appears, that, although successfully comleting the db3 make, the
packages does not produce the later required db3/libdb-4.5.la
here is the debug output
{{{
sudo port -d install rpm
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/rpm
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/rpm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port rpm.
DEBUG: Requested variant macosx is not provided by port rpm.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.0.000_2 exists in the ports tree
DEBUG: readline 6.0.000_2 +darwin is the latest installed
DEBUG: readline 6.0.000_2 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port readline.
DEBUG: Requested variant macosx is not provided by port readline.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 is the latest installed
DEBUG: ncurses 5.7_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 is the latest installed
DEBUG: ncursesw 5.7_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 is the latest installed
DEBUG: gettext 0.17_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0 is the latest installed
DEBUG: libiconv 1.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: popt 1.15_0 exists in the ports tree
DEBUG: popt 1.15_0 is the latest installed
DEBUG: popt 1.15_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port popt.
DEBUG: Requested variant i386 is not provided by port popt.
DEBUG: Requested variant macosx is not provided by port popt.
DEBUG: No need to upgrade! popt 1.15_0 >= popt 1.15_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.18_0 exists in the ports tree
DEBUG: sqlite3 3.6.18_0 is the latest installed
DEBUG: sqlite3 3.6.18_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port sqlite3.
DEBUG: Requested variant i386 is not provided by port sqlite3.
DEBUG: Requested variant macosx is not provided by port sqlite3.
DEBUG: No need to upgrade! sqlite3 3.6.18_0 >= sqlite3 3.6.18_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/neon
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: neon 0.28.6_0 exists in the ports tree
DEBUG: neon 0.28.6_0 is the latest installed
DEBUG: neon 0.28.6_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/www/neon
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port neon.
DEBUG: Requested variant i386 is not provided by port neon.
DEBUG: Requested variant macosx is not provided by port neon.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8k_0 exists in the ports tree
DEBUG: openssl 0.9.8k_0 +darwin is the latest installed
DEBUG: openssl 0.9.8k_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3 is the latest installed
DEBUG: zlib 1.2.3_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: No need to upgrade! openssl 0.9.8k_0 >= openssl 0.9.8k_0
DEBUG: No need to upgrade! neon 0.28.6_0 >= neon 0.28.6_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python24
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python24 2.4.6_4 exists in the ports tree
DEBUG: python24 2.4.6_4 +darwin+darwin_9+macosx is the latest installed
DEBUG: python24 2.4.6_4 +darwin+darwin_9+macosx is active
DEBUG: Merging existing variants darwin darwin_9 macosx into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python24
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port python24.
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant darwin_9 provides darwin_9
DEBUG: No need to upgrade! python24 2.4.6_4 >= python24 2.4.6_4
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 is the latest installed
DEBUG: perl5.8 5.8.9_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/beecrypt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: beecrypt 4.2.1_0 exists in the ports tree
DEBUG: beecrypt 4.2.1_0 is the latest installed
DEBUG: beecrypt 4.2.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/beecrypt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port beecrypt.
DEBUG: Requested variant i386 is not provided by port beecrypt.
DEBUG: Requested variant macosx is not provided by port beecrypt.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: icu 4.3.1_0 exists in the ports tree
DEBUG: icu 4.3.1_0 is the latest installed
DEBUG: icu 4.3.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port icu.
DEBUG: Requested variant i386 is not provided by port icu.
DEBUG: Requested variant macosx is not provided by port icu.
DEBUG: No need to upgrade! icu 4.3.1_0 >= icu 4.3.1_0
DEBUG: No need to upgrade! beecrypt 4.2.1_0 >= beecrypt 4.2.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gzip 1.3.12_0 exists in the ports tree
DEBUG: gzip 1.3.12_0 is the latest installed
DEBUG: gzip 1.3.12_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gzip.
DEBUG: Requested variant i386 is not provided by port gzip.
DEBUG: Requested variant macosx is not provided by port gzip.
DEBUG: No need to upgrade! gzip 1.3.12_0 >= gzip 1.3.12_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
---> Computing dependencies for rpm
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: popt
DEBUG: Found Dependency: receipt exists for popt
DEBUG: Searching for dependency: sqlite3
DEBUG: Found Dependency: receipt exists for sqlite3
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: neon
DEBUG: Found Dependency: receipt exists for neon
DEBUG: Searching for dependency: python24
DEBUG: Found Dependency: receipt exists for python24
DEBUG: Searching for dependency: perl5.8
DEBUG: Found Dependency: receipt exists for perl5.8
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: beecrypt
DEBUG: Found Dependency: receipt exists for beecrypt
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: openssl
DEBUG: Found Dependency: receipt exists for openssl
DEBUG: Searching for dependency: gzip
DEBUG: Found Dependency: receipt exists for gzip
DEBUG: Searching for dependency: bzip2
DEBUG: Found Dependency: receipt exists for bzip2
DEBUG: Searching for dependency: unzip
DEBUG: Didn't find receipt, going to depspec regex for: unzip
DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
DEBUG: Executing org.macports.main (rpm)
DEBUG: Skipping completed org.macports.fetch (rpm)
DEBUG: Skipping completed org.macports.checksum (rpm)
DEBUG: Skipping completed org.macports.extract (rpm)
DEBUG: Skipping completed org.macports.patch (rpm)
DEBUG: Skipping completed org.macports.configure (rpm)
---> Building rpm
DEBUG: Executing org.macports.build (rpm)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9"
&& /usr/bin/gnumake -j1 all'
/usr/bin/gnumake all-recursive
Making all in po
gnumake[2]: Nothing to be done for `all'.
Making all in misc
gnumake[2]: Nothing to be done for `all'.
Making all in zlib
/usr/bin/gnumake all-am
gnumake[3]: Nothing to be done for `all-am'.
Making all in file
/usr/bin/gnumake all-recursive
Making all in src
/usr/bin/gnumake all-am
gnumake[5]: Nothing to be done for `all-am'.
Making all in magic
gnumake[4]: Nothing to be done for `all'.
Making all in doc
gnumake[4]: Nothing to be done for `all'.
Making all in python
gnumake[4]: Nothing to be done for `all'.
gnumake[4]: Nothing to be done for `all-am'.
Making all in db3
gnumake[2]: Nothing to be done for `all'.
Making all in syck
Making all in lib
/usr/bin/gnumake all-am
gnumake[4]: Nothing to be done for `all-am'.
gnumake[3]: Nothing to be done for `all-am'.
Making all in lua
gnumake[2]: Nothing to be done for `all'.
Making all in rpmio
gnumake[2]: Nothing to be done for `all'.
Making all in rpmdb
/usr/bin/gnumake all-am
sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la >
../db3/libdb.la
/bin/sh: ../db3/libdb-4.5.la: No such file or directory
gnumake[3]: *** [../db3/libdb.la] Error 1
gnumake[2]: *** [all] Error 2
gnumake[1]: *** [all-recursive] Error 1
gnumake: *** [all] Error 2
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9"
&& /usr/bin/gnumake -j1 all " returned error 2
Command output: /usr/bin/gnumake all-recursive
Making all in src
/usr/bin/gnumake all-am
gnumake[5]: Nothing to be done for `all-am'.
Making all in magic
gnumake[4]: Nothing to be done for `all'.
Making all in doc
gnumake[4]: Nothing to be done for `all'.
Making all in python
gnumake[4]: Nothing to be done for `all'.
gnumake[4]: Nothing to be done for `all-am'.
Making all in db3
gnumake[2]: Nothing to be done for `all'.
Making all in syck
Making all in lib
/usr/bin/gnumake all-am
gnumake[4]: Nothing to be done for `all-am'.
gnumake[3]: Nothing to be done for `all-am'.
Making all in lua
gnumake[2]: Nothing to be done for `all'.
Making all in rpmio
gnumake[2]: Nothing to be done for `all'.
Making all in rpmdb
/usr/bin/gnumake all-am
sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la >
../db3/libdb.la
/bin/sh: ../db3/libdb-4.5.la: No such file or directory
gnumake[3]: *** [../db3/libdb.la] Error 1
gnumake[2]: *** [all] Error 2
gnumake[1]: *** [all-recursive] Error 1
gnumake: *** [all] Error 2
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9"
&& /usr/bin/gnumake -j1 all " returned error 2
Command output: /usr/bin/gnumake all-recursive
Making all in src
/usr/bin/gnumake all-am
gnumake[5]: Nothing to be done for `all-am'.
Making all in magic
gnumake[4]: Nothing to be done for `all'.
Making all in doc
gnumake[4]: Nothing to be done for `all'.
Making all in python
gnumake[4]: Nothing to be done for `all'.
gnumake[4]: Nothing to be done for `all-am'.
Making all in db3
gnumake[2]: Nothing to be done for `all'.
Making all in syck
Making all in lib
/usr/bin/gnumake all-am
gnumake[4]: Nothing to be done for `all-am'.
gnumake[3]: Nothing to be done for `all-am'.
Making all in lua
gnumake[2]: Nothing to be done for `all'.
Making all in rpmio
gnumake[2]: Nothing to be done for `all'.
Making all in rpmdb
/usr/bin/gnumake all-am
sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la >
../db3/libdb.la
/bin/sh: ../db3/libdb-4.5.la: No such file or directory
gnumake[3]: *** [../db3/libdb.la] Error 1
gnumake[2]: *** [all] Error 2
gnumake[1]: *** [all-recursive] Error 1
gnumake: *** [all] Error 2
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for rpm):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: Status 1 encountered during processing.
}}}
--
--
Ticket URL: <http://trac.macports.org/ticket/22204#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list