[MacPorts] #21049: Ghostscript fails to build on Snow Leopard (again)

[MacPorts]

#21049: Ghostscript fails to build on Snow Leopard (again)
---------------------------------+------------------------------------------
 Reporter:  davidw@…             |       Owner:  takanori@…           
     Type:  defect               |      Status:  new                  
 Priority:  Normal               |   Milestone:                       
Component:  ports                |     Version:  1.8.0                
 Keywords:                       |        Port:                       
---------------------------------+------------------------------------------
Description changed by snc@…:

Old description:

> This appears to be a re-ccurance of #20935
> I have also had this error. The initial error message was:
>
> The machine with the problem has been upgraded from 10.5.8 to 10.6 and
> MacPorts-1.8.0-10.6-SnowLeopard.dmg installed
>
> {{{
> sudo port install ghostscript
> Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
> though installed variants "" do not match "+darwin_10". Use 'upgrade
> --enforce-variants' to switch to the requested variants.
> Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
> though installed variants "" do not match "+darwin_10". Use 'upgrade
> --enforce-variants' to switch to the requested variants.
> --->  Computing dependencies for ghostscript
> --->  Fetching ghostscript
> --->  Verifying checksum(s) for ghostscript
> --->  Extracting ghostscript
> --->  Applying patches to ghostscript
> --->  Configuring ghostscript
> Error: Target org.macports.configure returned: configure failure: shell
> command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_ghostscript/work/ghostscript-8.70"
> && ./configure --prefix=/opt/local --disable-compile-inits --disable-cups
> --disable-gtk " returned error 1
> Command output: checking sys/window.h presence... no
> checking for sys/window.h... no
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking for mode_t... yes
> checking for off_t... yes
> checking for size_t... yes
> checking for struct stat.st_blocks... yes
> checking whether time.h and sys/time.h may both be included... yes
> checking whether struct tm is in sys/time.h or time.h... time.h
> checking size of unsigned long int... 8
> checking for pkg-config... /opt/local/bin/pkg-config
> checking for fontconfig with pkg-config... yes
> checking for cos in -lm... yes
> checking for pthread_create in -lpthread... yes
> checking for iconv_open... no
> checking for libiconv_open in -liconv... no
> checking for iconv_open in -liconv... no
> checking for systempapername in -lpaper... no
> configure: WARNING: disabling support for libpaper
> checking for dlopen in -ldl... yes
> checking for local jpeg library source... no
> checking for jpeg_set_defaults in -ljpeg... no
> configure: error: I wasn't able to find a copy
>   of the jpeg library. This is required for compiling
>   ghostscript. Please download a copy of the source,
>   e.g. from http://www.ijg.org/, unpack it at the
>   top level of the gs source tree, and rename
>   the directory to 'jpeg'.
> }}}
>
> Further examination shows that there are 3 _local directories that
> contain the jpeg libpng and zlib files that are required
>
> Symlinking as follows:
>
> {{{
> ln -s jpeg_local/ jpeg
> ln -s libpng_local/ libpng
> ln -s zlib_local/ zlib
> }}}
>
> This proceeds for much longer before producing the error:
>
> {{{
>  port install ghostscript
> Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
> though installed variants "" do not match "+darwin_10". Use 'upgrade
> --enforce-variants' to switch to the requested variants.
> Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
> though installed variants "" do not match "+darwin_10". Use 'upgrade
> --enforce-variants' to switch to the requested variants.
> --->  Computing dependencies for ghostscript
> --->  Configuring ghostscript
> --->  Building ghostscript
> Error: Target org.macports.build returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_ghostscript/work/ghostscript-8.70"
> && /usr/bin/make so " returned error 2
> Command output:   "_cairo_ps_surface_set_eps", referenced from:
>       _devcairo_open_device in gdevcairo.o
>   "_FcInitLoadConfigAndFonts", referenced from:
>       _gp_enumerate_fonts_init in gp_unix.o
>   "_cairo_set_line_join", referenced from:
>       _devcairo_setlinejoin in gdevcairo.o
>   "_cairo_line_to", referenced from:
>       _devcairo_lineto in gdevcairo.o
>   "_cairo_save", referenced from:
>       _devcairo_open_device in gdevcairo.o
>   "_cairo_set_miter_limit", referenced from:
>       _devcairo_setmiterlimit in gdevcairo.o
>   "_cairo_new_path", referenced from:
>       _devcairo_endpath in gdevcairo.o
>       _devcairo_beginpath in gdevcairo.o
>   "_cairo_pattern_reference", referenced from:
>       _devcairo_open_device in gdevcairo.o
>       _devcairo_open_device in gdevcairo.o
>   "_cairo_fill_preserve", referenced from:
>       _devcairo_endpath in gdevcairo.o
>   "_cairo_surface_destroy", referenced from:
>       _devcairo_open_device in gdevcairo.o
>   "_cairo_clip_preserve", referenced from:
>       _devcairo_endpath in gdevcairo.o
>   "_cairo_surface_status", referenced from:
>       _devcairo_check_status in gdevcairo.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make[1]: *** [bin/../sobin/libgs.8.70.dylib] Error 1
> make: *** [so] Error 2
>
> Error: Status 1 encountered during processing.
> }}}
>
> I have attached a debug build however doing a port clean removes the
> symlinks so the debug is immediately after the above steps

New description:

 This appears to be a recurrence of #20935
 I have also had this error. The initial error message was:

 The machine with the problem has been upgraded from 10.5.8 to 10.6 and
 MacPorts-1.8.0-10.6-SnowLeopard.dmg installed

 {{{
 sudo port install ghostscript
 Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
 though installed variants "" do not match "+darwin_10". Use 'upgrade
 --enforce-variants' to switch to the requested variants.
 Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
 though installed variants "" do not match "+darwin_10". Use 'upgrade
 --enforce-variants' to switch to the requested variants.
 --->  Computing dependencies for ghostscript
 --->  Fetching ghostscript
 --->  Verifying checksum(s) for ghostscript
 --->  Extracting ghostscript
 --->  Applying patches to ghostscript
 --->  Configuring ghostscript
 Error: Target org.macports.configure returned: configure failure: shell
 command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_ghostscript/work/ghostscript-8.70"
 && ./configure --prefix=/opt/local --disable-compile-inits --disable-cups
 --disable-gtk " returned error 1
 Command output: checking sys/window.h presence... no
 checking for sys/window.h... no
 checking for an ANSI C-conforming const... yes
 checking for inline... inline
 checking for mode_t... yes
 checking for off_t... yes
 checking for size_t... yes
 checking for struct stat.st_blocks... yes
 checking whether time.h and sys/time.h may both be included... yes
 checking whether struct tm is in sys/time.h or time.h... time.h
 checking size of unsigned long int... 8
 checking for pkg-config... /opt/local/bin/pkg-config
 checking for fontconfig with pkg-config... yes
 checking for cos in -lm... yes
 checking for pthread_create in -lpthread... yes
 checking for iconv_open... no
 checking for libiconv_open in -liconv... no
 checking for iconv_open in -liconv... no
 checking for systempapername in -lpaper... no
 configure: WARNING: disabling support for libpaper
 checking for dlopen in -ldl... yes
 checking for local jpeg library source... no
 checking for jpeg_set_defaults in -ljpeg... no
 configure: error: I wasn't able to find a copy
   of the jpeg library. This is required for compiling
   ghostscript. Please download a copy of the source,
   e.g. from http://www.ijg.org/, unpack it at the
   top level of the gs source tree, and rename
   the directory to 'jpeg'.
 }}}

 Further examination shows that there are 3 _local directories that contain
 the jpeg libpng and zlib files that are required

 Symlinking as follows:

 {{{
 ln -s jpeg_local/ jpeg
 ln -s libpng_local/ libpng
 ln -s zlib_local/ zlib
 }}}

 This proceeds for much longer before producing the error:

 {{{
  port install ghostscript
 Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
 though installed variants "" do not match "+darwin_10". Use 'upgrade
 --enforce-variants' to switch to the requested variants.
 Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
 though installed variants "" do not match "+darwin_10". Use 'upgrade
 --enforce-variants' to switch to the requested variants.
 --->  Computing dependencies for ghostscript
 --->  Configuring ghostscript
 --->  Building ghostscript
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_ghostscript/work/ghostscript-8.70"
 && /usr/bin/make so " returned error 2
 Command output:   "_cairo_ps_surface_set_eps", referenced from:
       _devcairo_open_device in gdevcairo.o
   "_FcInitLoadConfigAndFonts", referenced from:
       _gp_enumerate_fonts_init in gp_unix.o
   "_cairo_set_line_join", referenced from:
       _devcairo_setlinejoin in gdevcairo.o
   "_cairo_line_to", referenced from:
       _devcairo_lineto in gdevcairo.o
   "_cairo_save", referenced from:
       _devcairo_open_device in gdevcairo.o
   "_cairo_set_miter_limit", referenced from:
       _devcairo_setmiterlimit in gdevcairo.o
   "_cairo_new_path", referenced from:
       _devcairo_endpath in gdevcairo.o
       _devcairo_beginpath in gdevcairo.o
   "_cairo_pattern_reference", referenced from:
       _devcairo_open_device in gdevcairo.o
       _devcairo_open_device in gdevcairo.o
   "_cairo_fill_preserve", referenced from:
       _devcairo_endpath in gdevcairo.o
   "_cairo_surface_destroy", referenced from:
       _devcairo_open_device in gdevcairo.o
   "_cairo_clip_preserve", referenced from:
       _devcairo_endpath in gdevcairo.o
   "_cairo_surface_status", referenced from:
       _devcairo_check_status in gdevcairo.o
 ld: symbol(s) not found
 collect2: ld returned 1 exit status
 make[1]: *** [bin/../sobin/libgs.8.70.dylib] Error 1
 make: *** [so] Error 2

 Error: Status 1 encountered during processing.
 }}}

 I have attached a debug build however doing a port clean removes the
 symlinks so the debug is immediately after the above steps

--

-- 
Ticket URL: <http://trac.macports.org/ticket/21049#comment:3>
MacPorts <http://www.macports.org/>
Ports system for Mac OS