[MacPorts] #21079: Port not fully installed?

Fri Sep 4 03:26:09 PDT 2009

#21079: Port not fully installed?
---------------------------------+------------------------------------------
 Reporter:  link@…               |       Owner:  macports-tickets@…                   
     Type:  defect               |      Status:  new                                  
 Priority:  Normal               |   Milestone:                                       
Component:  ports                |     Version:  1.8.0                                
 Keywords:                       |        Port:  transfig                             
---------------------------------+------------------------------------------
Description changed by toby@…:

Old description:

> Hi,
>
> I'm trying to install transfig, which appeared to install fine with the
> sudo port install transfig command. However, I can't use any of the
> commands (I just get a `command not found' error). Is there something I
> have to do to compile or run it? If I do a port contents transfig, I come
> up with some .gz files (listed below) - do they need to be unzipped? All
> the steps I've done with output are listed below.
>
> Sorry, I'm obviously new to this.
> Thanks,
> Natasha
>

> Unknown-00-19-e3-06-86-65:bin bluescharm$ sudo port install transfig
> Password:
> --->  Computing dependencies for transfig
> --->  Fetching perl5.8
> --->  Attempting to fetch perl-5.8.9.tar.bz2 from
> http://arn.se.distfiles.macports.org/perl5.8
> --->  Verifying checksum(s) for perl5.8
> --->  Extracting perl5.8
> --->  Applying patches to perl5.8
> --->  Configuring perl5.8
> --->  Building perl5.8
> --->  Staging perl5.8 into destroot
> --->  Installing perl5.8 @5.8.9_3
> --->  Activating perl5.8 @5.8.9_3
> --->  Cleaning perl5.8
> --->  Fetching perl5
> --->  Verifying checksum(s) for perl5
> --->  Extracting perl5
> --->  Configuring perl5
> --->  Building perl5
> --->  Staging perl5 into destroot
> --->  Installing perl5 @5.8.9_0
> --->  Activating perl5 @5.8.9_0
> --->  Cleaning perl5
> --->  Fetching pkgconfig
> --->  Attempting to fetch pkg-config-0.23.tar.gz from
> http://arn.se.distfiles.macports.org/pkgconfig
> --->  Verifying checksum(s) for pkgconfig
> --->  Extracting pkgconfig
> --->  Configuring pkgconfig
> --->  Building pkgconfig
> --->  Staging pkgconfig into destroot
> --->  Installing pkgconfig @0.23_1
> --->  Activating pkgconfig @0.23_1
> --->  Cleaning pkgconfig
> --->  Fetching xorg-cf-files
> --->  Attempting to fetch xorg-cf-files-1.0.2.tar.bz2 from
> http://kent.dl.sourceforge.net/fink
> --->  Verifying checksum(s) for xorg-cf-files
> --->  Extracting xorg-cf-files
> --->  Applying patches to xorg-cf-files
> --->  Configuring xorg-cf-files
> --->  Building xorg-cf-files
> --->  Staging xorg-cf-files into destroot
> --->  Installing xorg-cf-files @1.0.2_3
> --->  Activating xorg-cf-files @1.0.2_3
> --->  Cleaning xorg-cf-files
> --->  Fetching xorg-xproto
> --->  Attempting to fetch xproto-7.0.15.tar.bz2 from
> http://arn.se.distfiles.macports.org/xorg-xproto
> --->  Verifying checksum(s) for xorg-xproto
> --->  Extracting xorg-xproto
> --->  Configuring xorg-xproto
> --->  Building xorg-xproto
> --->  Staging xorg-xproto into destroot
> --->  Installing xorg-xproto @7.0.15_0
> --->  Activating xorg-xproto @7.0.15_0
> --->  Cleaning xorg-xproto
> --->  Fetching imake
> --->  Attempting to fetch imake-1.0.2.tar.bz2 from
> http://kent.dl.sourceforge.net/fink
> --->  Verifying checksum(s) for imake
> --->  Extracting imake
> --->  Configuring imake
> --->  Building imake
> --->  Staging imake into destroot
> --->  Installing imake @1.0.2_1
> --->  Activating imake @1.0.2_1
> --->  Cleaning imake
> --->  Fetching zlib
> --->  Attempting to fetch zlib-1.2.3.tar.bz2 from
> http://www.gzip.org/zlib/
> --->  Verifying checksum(s) for zlib
> --->  Extracting zlib
> --->  Applying patches to zlib
> --->  Configuring zlib
> --->  Building zlib
> --->  Staging zlib into destroot
> --->  Installing zlib @1.2.3_2
> --->  Activating zlib @1.2.3_2
> --->  Cleaning zlib
> --->  Fetching libpng
> --->  Attempting to fetch libpng-1.2.38.tar.bz2 from
> http://kent.dl.sourceforge.net/libpng
> --->  Verifying checksum(s) for libpng
> --->  Extracting libpng
> --->  Configuring libpng
> --->  Building libpng
> --->  Staging libpng into destroot
> --->  Installing libpng @1.2.38_0
> --->  Activating libpng @1.2.38_0
> --->  Cleaning libpng
> --->  Fetching jpeg
> --->  Attempting to fetch jpegsrc.v6b.tar.gz from
> http://arn.se.distfiles.macports.org/jpeg
> --->  Attempting to fetch droppatch.tar.gz from
> http://sylvana.net/jpegcrop/
> --->  Attempting to fetch droppatch.tar.gz from
> http://arn.se.distfiles.macports.org/jpeg
> --->  Verifying checksum(s) for jpeg
> --->  Extracting jpeg
> --->  Applying patches to jpeg
> --->  Configuring jpeg
> --->  Building jpeg
> --->  Staging jpeg into destroot
> --->  Installing jpeg @6b_3
> --->  Activating jpeg @6b_3
> --->  Cleaning jpeg
> --->  Fetching jasper
> --->  Attempting to fetch jasper-1.900.1.zip from
> http://arn.se.distfiles.macports.org/jasper
> --->  Verifying checksum(s) for jasper
> --->  Extracting jasper
> --->  Applying patches to jasper
> --->  Configuring jasper
> --->  Building jasper
> --->  Staging jasper into destroot
> --->  Installing jasper @1.900.1_4
> --->  Activating jasper @1.900.1_4
> --->  Cleaning jasper
> --->  Fetching tiff
> --->  Attempting to fetch tiff-3.8.2.tar.gz from
> ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/distfiles/
> --->  Verifying checksum(s) for tiff
> --->  Extracting tiff
> --->  Applying patches to tiff
> --->  Configuring tiff
> --->  Building tiff
> --->  Staging tiff into destroot
> --->  Installing tiff @3.8.2_3+macosx
> --->  Activating tiff @3.8.2_3+macosx
> --->  Cleaning tiff
> --->  Fetching netpbm
> --->  Attempting to fetch netpbm-10.26.61.tgz from
> http://kent.dl.sourceforge.net/netpbm
> --->  Verifying checksum(s) for netpbm
> --->  Extracting netpbm
> --->  Applying patches to netpbm
> --->  Configuring netpbm
> --->  Building netpbm
> --->  Staging netpbm into destroot
> --->  Installing netpbm @10.26.61_0+darwin
> --->  Activating netpbm @10.26.61_0+darwin
> --->  Cleaning netpbm
> --->  Fetching transfig
> --->  Attempting to fetch transfig.3.2.5.tar.gz from
> http://arn.se.distfiles.macports.org/transfig
> --->  Verifying checksum(s) for transfig
> --->  Extracting transfig
> --->  Applying patches to transfig
> --->  Configuring transfig
> --->  Building transfig
> --->  Staging transfig into destroot
> --->  Installing transfig @3.2.5_2
> --->  Activating transfig @3.2.5_2
> --->  Cleaning transfig
>
> Unknown-00-19-e3-06-86-65:~ bluescharm$ fig2dev -L gif
> ~/Desktop/figcolor.fig ~/Desktop/figcolor.gif
> -bash: fig2dev: command not found
>
> Unknown-00-19-e3-06-86-65:man1 bluescharm$ port contents transfig
> Port transfig contains:
>   /opt/local/bin/transfig
>   /opt/local/share/man/man1/fig2dev.1.gz
>   /opt/local/share/man/man1/fig2ps2tex.1.gz
>   /opt/local/share/man/man1/pic2tpic.1.gz
>   /opt/local/share/man/man1/transfig.1.gz
> Unknown-00-19-e3-06-86-65:man1 bluescharm$

New description:

 Hi,

 I'm trying to install transfig, which appeared to install fine with the
 sudo port install transfig command. However, I can't use any of the
 commands (I just get a `command not found' error). Is there something I
 have to do to compile or run it? If I do a port contents transfig, I come
 up with some .gz files (listed below) - do they need to be unzipped? All
 the steps I've done with output are listed below.

 Sorry, I'm obviously new to this.
 Thanks,
 Natasha

 {{{
 Unknown-00-19-e3-06-86-65:bin bluescharm$ sudo port install transfig
 Password:
 --->  Computing dependencies for transfig
 --->  Fetching perl5.8
 --->  Attempting to fetch perl-5.8.9.tar.bz2 from
 http://arn.se.distfiles.macports.org/perl5.8
 --->  Verifying checksum(s) for perl5.8
 --->  Extracting perl5.8
 --->  Applying patches to perl5.8
 --->  Configuring perl5.8
 --->  Building perl5.8
 --->  Staging perl5.8 into destroot
 --->  Installing perl5.8 @5.8.9_3
 --->  Activating perl5.8 @5.8.9_3
 --->  Cleaning perl5.8
 --->  Fetching perl5
 --->  Verifying checksum(s) for perl5
 --->  Extracting perl5
 --->  Configuring perl5
 --->  Building perl5
 --->  Staging perl5 into destroot
 --->  Installing perl5 @5.8.9_0
 --->  Activating perl5 @5.8.9_0
 --->  Cleaning perl5
 --->  Fetching pkgconfig
 --->  Attempting to fetch pkg-config-0.23.tar.gz from
 http://arn.se.distfiles.macports.org/pkgconfig
 --->  Verifying checksum(s) for pkgconfig
 --->  Extracting pkgconfig
 --->  Configuring pkgconfig
 --->  Building pkgconfig
 --->  Staging pkgconfig into destroot
 --->  Installing pkgconfig @0.23_1
 --->  Activating pkgconfig @0.23_1
 --->  Cleaning pkgconfig
 --->  Fetching xorg-cf-files
 --->  Attempting to fetch xorg-cf-files-1.0.2.tar.bz2 from
 http://kent.dl.sourceforge.net/fink
 --->  Verifying checksum(s) for xorg-cf-files
 --->  Extracting xorg-cf-files
 --->  Applying patches to xorg-cf-files
 --->  Configuring xorg-cf-files
 --->  Building xorg-cf-files
 --->  Staging xorg-cf-files into destroot
 --->  Installing xorg-cf-files @1.0.2_3
 --->  Activating xorg-cf-files @1.0.2_3
 --->  Cleaning xorg-cf-files
 --->  Fetching xorg-xproto
 --->  Attempting to fetch xproto-7.0.15.tar.bz2 from
 http://arn.se.distfiles.macports.org/xorg-xproto
 --->  Verifying checksum(s) for xorg-xproto
 --->  Extracting xorg-xproto
 --->  Configuring xorg-xproto
 --->  Building xorg-xproto
 --->  Staging xorg-xproto into destroot
 --->  Installing xorg-xproto @7.0.15_0
 --->  Activating xorg-xproto @7.0.15_0
 --->  Cleaning xorg-xproto
 --->  Fetching imake
 --->  Attempting to fetch imake-1.0.2.tar.bz2 from
 http://kent.dl.sourceforge.net/fink
 --->  Verifying checksum(s) for imake
 --->  Extracting imake
 --->  Configuring imake
 --->  Building imake
 --->  Staging imake into destroot
 --->  Installing imake @1.0.2_1
 --->  Activating imake @1.0.2_1
 --->  Cleaning imake
 --->  Fetching zlib
 --->  Attempting to fetch zlib-1.2.3.tar.bz2 from
 http://www.gzip.org/zlib/
 --->  Verifying checksum(s) for zlib
 --->  Extracting zlib
 --->  Applying patches to zlib
 --->  Configuring zlib
 --->  Building zlib
 --->  Staging zlib into destroot
 --->  Installing zlib @1.2.3_2
 --->  Activating zlib @1.2.3_2
 --->  Cleaning zlib
 --->  Fetching libpng
 --->  Attempting to fetch libpng-1.2.38.tar.bz2 from
 http://kent.dl.sourceforge.net/libpng
 --->  Verifying checksum(s) for libpng
 --->  Extracting libpng
 --->  Configuring libpng
 --->  Building libpng
 --->  Staging libpng into destroot
 --->  Installing libpng @1.2.38_0
 --->  Activating libpng @1.2.38_0
 --->  Cleaning libpng
 --->  Fetching jpeg
 --->  Attempting to fetch jpegsrc.v6b.tar.gz from
 http://arn.se.distfiles.macports.org/jpeg
 --->  Attempting to fetch droppatch.tar.gz from
 http://sylvana.net/jpegcrop/
 --->  Attempting to fetch droppatch.tar.gz from
 http://arn.se.distfiles.macports.org/jpeg
 --->  Verifying checksum(s) for jpeg
 --->  Extracting jpeg
 --->  Applying patches to jpeg
 --->  Configuring jpeg
 --->  Building jpeg
 --->  Staging jpeg into destroot
 --->  Installing jpeg @6b_3
 --->  Activating jpeg @6b_3
 --->  Cleaning jpeg
 --->  Fetching jasper
 --->  Attempting to fetch jasper-1.900.1.zip from
 http://arn.se.distfiles.macports.org/jasper
 --->  Verifying checksum(s) for jasper
 --->  Extracting jasper
 --->  Applying patches to jasper
 --->  Configuring jasper
 --->  Building jasper
 --->  Staging jasper into destroot
 --->  Installing jasper @1.900.1_4
 --->  Activating jasper @1.900.1_4
 --->  Cleaning jasper
 --->  Fetching tiff
 --->  Attempting to fetch tiff-3.8.2.tar.gz from
 ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/distfiles/
 --->  Verifying checksum(s) for tiff
 --->  Extracting tiff
 --->  Applying patches to tiff
 --->  Configuring tiff
 --->  Building tiff
 --->  Staging tiff into destroot
 --->  Installing tiff @3.8.2_3+macosx
 --->  Activating tiff @3.8.2_3+macosx
 --->  Cleaning tiff
 --->  Fetching netpbm
 --->  Attempting to fetch netpbm-10.26.61.tgz from
 http://kent.dl.sourceforge.net/netpbm
 --->  Verifying checksum(s) for netpbm
 --->  Extracting netpbm
 --->  Applying patches to netpbm
 --->  Configuring netpbm
 --->  Building netpbm
 --->  Staging netpbm into destroot
 --->  Installing netpbm @10.26.61_0+darwin
 --->  Activating netpbm @10.26.61_0+darwin
 --->  Cleaning netpbm
 --->  Fetching transfig
 --->  Attempting to fetch transfig.3.2.5.tar.gz from
 http://arn.se.distfiles.macports.org/transfig
 --->  Verifying checksum(s) for transfig
 --->  Extracting transfig
 --->  Applying patches to transfig
 --->  Configuring transfig
 --->  Building transfig
 --->  Staging transfig into destroot
 --->  Installing transfig @3.2.5_2
 --->  Activating transfig @3.2.5_2
 --->  Cleaning transfig

 Unknown-00-19-e3-06-86-65:~ bluescharm$ fig2dev -L gif
 ~/Desktop/figcolor.fig ~/Desktop/figcolor.gif
 -bash: fig2dev: command not found

 Unknown-00-19-e3-06-86-65:man1 bluescharm$ port contents transfig
 Port transfig contains:
   /opt/local/bin/transfig
   /opt/local/share/man/man1/fig2dev.1.gz
   /opt/local/share/man/man1/fig2ps2tex.1.gz
   /opt/local/share/man/man1/pic2tpic.1.gz
   /opt/local/share/man/man1/transfig.1.gz
 Unknown-00-19-e3-06-86-65:man1 bluescharm$
 }}}

--

-- 
Ticket URL: <http://trac.macports.org/ticket/21079#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS