[MacPorts] #18755: PPC problem on gmp 4.2.4_2
MacPorts
noreply at macports.org
Sat Sep 5 02:13:05 PDT 2009
#18755: PPC problem on gmp 4.2.4_2
---------------------------------------+------------------------------------
Reporter: garribald@… | Owner: mcalhoun@…
Type: defect | Status: closed
Priority: Normal | Milestone:
Component: ports | Version: 1.7.0
Resolution: fixed | Keywords: ppc
Port: gmp |
---------------------------------------+------------------------------------
Description changed by ryandesign@…:
Old description:
> I am not sure how much this error is related to[[BR]]
> http://trac.macports.org/ticket/9053 [[BR]]
> or simply the recurrence of[[BR]]
> http://trac.macports.org/ticket/11800 [[BR]]
> so if this ticket is a dupe, i am sorry. Anyway, the revision 2 of gmp
> 4.2.4 stops with following error:
>
> {{{
> $ sudo port -vd upgrade gmp
> Password:
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gmp 4.2.4_2 exists in the ports tree
> DEBUG: gmp 4.2.4_1 is installed
> DEBUG: variants to install {} ppc
> DEBUG: available variants are : universal
> DEBUG: new portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant powerpc is not provided by port gmp.
> DEBUG: Requested variant darwin is not provided by port gmp.
> DEBUG: Requested variant macosx is not provided by port gmp.
> DEBUG: Executing org.macports.main (gmp)
> DEBUG: Skipping completed org.macports.fetch (gmp)
> DEBUG: Skipping completed org.macports.checksum (gmp)
> DEBUG: setting option extract.cmd to /opt/local/bin/bzip2
> DEBUG: Skipping completed org.macports.extract (gmp)
> DEBUG: Skipping completed org.macports.patch (gmp)
> DEBUG: Skipping completed org.macports.configure (gmp)
> ---> Building gmp
> DEBUG: Executing org.macports.build (gmp)
> DEBUG: port allows a parallel build
> DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gmp/work/gmp-4.2.4"
> && nice -n 18 make all'
> make all-recursive
> Making all in tests
> Making all in .
> make[3]: Nothing to be done for `all-am'.
> Making all in devel
> make[3]: Nothing to be done for `all'.
> Making all in mpn
> make[3]: Nothing to be done for `all'.
> Making all in mpz
> make[3]: Nothing to be done for `all'.
> Making all in mpq
> make[3]: Nothing to be done for `all'.
> Making all in mpf
> make[3]: Nothing to be done for `all'.
> Making all in rand
> make[3]: Nothing to be done for `all'.
> Making all in misc
> make[3]: Nothing to be done for `all'.
> Making all in cxx
> make[3]: Nothing to be done for `all'.
> Making all in mpbsd
> make[3]: Nothing to be done for `all'.
> Making all in mpn
> /bin/sh ../libtool --mode=compile --tag=CC ../mpn/m4-ccas --m4="m4"
> ccache /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I. -I. -I..
> -D__GMP_WITHIN_GMP -I.. -DOPERATION_`echo popcount | sed 's/_$//'`
> -I/opt/local/include -pipe `test -f 'popcount.asm' || echo
> './'`popcount.asm
> ../mpn/m4-ccas --m4=m4 ccache /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I.
> -I. -I.. -D__GMP_WITHIN_GMP -I.. -DOPERATION_popcount
> -I/opt/local/include -pipe popcount.asm -fno-common -DPIC -o
> .libs/popcount.o
> m4 -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_popcount -DPIC
> popcount.asm >tmp-popcount.s
> ccache /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I. -I. -I..
> -D__GMP_WITHIN_GMP -I.. -DOPERATION_popcount -I/opt/local/include -pipe
> tmp-popcount.s -fno-common -DPIC -o .libs/popcount.o
> tmp-popcount.s:127:vspltisb vector instruction is optional for the
> PowerPC (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:128:vspltisb vector instruction is optional for the
> PowerPC (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:129:vspltisb vector instruction is optional for the
> PowerPC (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:130:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:131:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:132:vspltisb vector instruction is optional for the
> PowerPC (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:137:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:140:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:141:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:147:vxor vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:150:vxor vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:172:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:174:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:176:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:177:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:179:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:180:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:181:vsububm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:182:vsububm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:183:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:184:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:185:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:186:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:187:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:188:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:189:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:190:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:191:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:192:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:193:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:194:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:195:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:196:vsum4ubs vector instruction is optional for the
> PowerPC (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:202:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:203:vxor vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:207:vor vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:208:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:213:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:214:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:216:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:217:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:218:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:219:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:220:vsububm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:221:vsububm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:222:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:223:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:224:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:225:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:226:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:227:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:228:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:229:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:230:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:231:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:232:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:233:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:234:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:235:vsum4ubs vector instruction is optional for the
> PowerPC (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:239:stvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> make[2]: *** [popcount.lo] Error 1
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
> Error: Target org.macports.build returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gmp/work/gmp-4.2.4"
> && nice -n 18 make all " returned error 2
> Command output: tmp-popcount.s:202:lvx vector instruction is optional for
> the PowerPC (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:203:vxor vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:207:vor vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:208:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:213:lvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:214:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:216:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:217:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:218:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:219:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:220:vsububm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:221:vsububm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:222:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:223:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:224:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:225:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:226:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:227:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:228:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:229:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:230:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:231:vsr vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:232:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:233:vand vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:234:vaddubm vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:235:vsum4ubs vector instruction is optional for the
> PowerPC (not allowed without -force_cpusubtype_ALL option)
> tmp-popcount.s:239:stvx vector instruction is optional for the PowerPC
> (not allowed without -force_cpusubtype_ALL option)
> make[2]: *** [popcount.lo] Error 1
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
>
> Warning: the following items did not execute (for gmp):
> org.macports.destroot org.macports.build
> DEBUG: invalid command name "::ui_init"
> while executing
> "::ui_init $priority $prefix $channels $message"
> ("uplevel" body line 2)
> invoked from within
> "uplevel 1 $body"
> Error: Unable to upgrade port: 1
> }}}
>
> The log is from a re-run of install with -vd flag - should show the
> problem. But i can do a full run as well, if needed. Haven't tried it
> again without ccache, I don't think it has anything to do with the
> problem.
>
> MacPorts 1.7.0, OS X 10.4.11, PPC
New description:
I am not sure how much this error is related to #9053 or simply the
recurrence of #11800 so if this ticket is a dupe, i am sorry. Anyway, the
revision 2 of gmp 4.2.4 stops with following error:
{{{
$ sudo port -vd upgrade gmp
Password:
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gmp 4.2.4_2 exists in the ports tree
DEBUG: gmp 4.2.4_1 is installed
DEBUG: variants to install {} ppc
DEBUG: available variants are : universal
DEBUG: new portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gmp.
DEBUG: Requested variant darwin is not provided by port gmp.
DEBUG: Requested variant macosx is not provided by port gmp.
DEBUG: Executing org.macports.main (gmp)
DEBUG: Skipping completed org.macports.fetch (gmp)
DEBUG: Skipping completed org.macports.checksum (gmp)
DEBUG: setting option extract.cmd to /opt/local/bin/bzip2
DEBUG: Skipping completed org.macports.extract (gmp)
DEBUG: Skipping completed org.macports.patch (gmp)
DEBUG: Skipping completed org.macports.configure (gmp)
---> Building gmp
DEBUG: Executing org.macports.build (gmp)
DEBUG: port allows a parallel build
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gmp/work/gmp-4.2.4"
&& nice -n 18 make all'
make all-recursive
Making all in tests
Making all in .
make[3]: Nothing to be done for `all-am'.
Making all in devel
make[3]: Nothing to be done for `all'.
Making all in mpn
make[3]: Nothing to be done for `all'.
Making all in mpz
make[3]: Nothing to be done for `all'.
Making all in mpq
make[3]: Nothing to be done for `all'.
Making all in mpf
make[3]: Nothing to be done for `all'.
Making all in rand
make[3]: Nothing to be done for `all'.
Making all in misc
make[3]: Nothing to be done for `all'.
Making all in cxx
make[3]: Nothing to be done for `all'.
Making all in mpbsd
make[3]: Nothing to be done for `all'.
Making all in mpn
/bin/sh ../libtool --mode=compile --tag=CC ../mpn/m4-ccas --m4="m4" ccache
/usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I. -I. -I.. -D__GMP_WITHIN_GMP -I..
-DOPERATION_`echo popcount | sed 's/_$//'` -I/opt/local/include -pipe
`test -f 'popcount.asm' || echo './'`popcount.asm
../mpn/m4-ccas --m4=m4 ccache /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I. -I.
-I.. -D__GMP_WITHIN_GMP -I.. -DOPERATION_popcount -I/opt/local/include
-pipe popcount.asm -fno-common -DPIC -o .libs/popcount.o
m4 -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_popcount -DPIC
popcount.asm >tmp-popcount.s
ccache /usr/bin/gcc-4.0 -c -DHAVE_CONFIG_H -I. -I. -I..
-D__GMP_WITHIN_GMP -I.. -DOPERATION_popcount -I/opt/local/include -pipe
tmp-popcount.s -fno-common -DPIC -o .libs/popcount.o
tmp-popcount.s:127:vspltisb vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:128:vspltisb vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:129:vspltisb vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:130:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:131:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:132:vspltisb vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:137:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:140:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:141:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:147:vxor vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:150:vxor vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:172:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:174:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:176:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:177:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:179:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:180:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:181:vsububm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:182:vsububm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:183:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:184:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:185:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:186:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:187:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:188:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:189:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:190:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:191:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:192:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:193:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:194:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:195:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:196:vsum4ubs vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:202:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:203:vxor vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:207:vor vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:208:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:213:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:214:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:216:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:217:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:218:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:219:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:220:vsububm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:221:vsububm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:222:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:223:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:224:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:225:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:226:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:227:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:228:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:229:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:230:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:231:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:232:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:233:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:234:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:235:vsum4ubs vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:239:stvx vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
make[2]: *** [popcount.lo] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gmp/work/gmp-4.2.4"
&& nice -n 18 make all " returned error 2
Command output: tmp-popcount.s:202:lvx vector instruction is optional for
the PowerPC (not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:203:vxor vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:207:vor vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:208:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:213:lvx vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:214:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:216:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:217:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:218:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:219:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:220:vsububm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:221:vsububm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:222:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:223:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:224:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:225:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:226:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:227:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:228:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:229:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:230:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:231:vsr vector instruction is optional for the PowerPC (not
allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:232:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:233:vand vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:234:vaddubm vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:235:vsum4ubs vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
tmp-popcount.s:239:stvx vector instruction is optional for the PowerPC
(not allowed without -force_cpusubtype_ALL option)
make[2]: *** [popcount.lo] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Warning: the following items did not execute (for gmp):
org.macports.destroot org.macports.build
DEBUG: invalid command name "::ui_init"
while executing
"::ui_init $priority $prefix $channels $message"
("uplevel" body line 2)
invoked from within
"uplevel 1 $body"
Error: Unable to upgrade port: 1
}}}
The log is from a re-run of install with -vd flag - should show the
problem. But i can do a full run as well, if needed. Haven't tried it
again without ccache, I don't think it has anything to do with the
problem.
MacPorts 1.7.0, OS X 10.4.11, PPC
--
--
Ticket URL: <http://trac.macports.org/ticket/18755#comment:9>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list