[MacPorts] #24344: libxml2 version 2.7.7 install fails on checksum

MacPorts noreply at macports.org
Sat Apr 3 05:27:19 PDT 2010 

#24344: libxml2 version 2.7.7 install fails on checksum
-----------------------------------+----------------------------------------
 Reporter:  lsimmonett@…           |       Owner:  macports-tickets@…                   
     Type:  defect                 |      Status:  new                                  
 Priority:  Normal                 |   Milestone:  MacPorts 1.8.3                       
Component:  ports                  |     Version:  1.8.2                                
 Keywords:                         |        Port:  libxml2                              
-----------------------------------+----------------------------------------
 Libxml2 version 2.7.7 fails to install when updating or installing fresh.
 I have had exactly the same behaviour on version 10.6.2 and 10.6.3.

 The error I get is as follows:

 {{{
 --->  Computing dependencies for libxml2
 --->  Verifying checksum(s) for libxml2
 Error: Checksum (md5) mismatch for libxml2-2.7.7.tar.gz
 Error: Checksum (sha1) mismatch for libxml2-2.7.7.tar.gz
 Error: Checksum (rmd160) mismatch for libxml2-2.7.7.tar.gz
 Error: Target org.macports.checksum returned: Unable to verify file
 checksums
 Error: Unable to upgrade port: 1
 Before reporting a bug, first run the command again with the -d flag to
 get complete output.
 }}}


 Adding the debug -d option I get the following output:

 {{{
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libxml2.
 DEBUG: Requested variant i386 is not provided by port libxml2.
 DEBUG: Requested variant macosx is not provided by port libxml2.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13.1_0 exists in the ports tree
 DEBUG: libiconv 1.13.1_0  is the latest installed
 DEBUG: libiconv 1.13.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.4_1 exists in the ports tree
 DEBUG: zlib 1.2.4_1  is the latest installed
 DEBUG: zlib 1.2.4_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant i386 is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: No need to upgrade! zlib 1.2.4_1 >= zlib 1.2.4_1
 --->  Computing dependencies for libxml2
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: zlib
 DEBUG: Found Dependency: receipt exists for zlib
 DEBUG: Executing org.macports.main (libxml2)
 DEBUG: Skipping completed org.macports.fetch (libxml2)
 --->  Verifying checksum(s) for libxml2
 DEBUG: Executing org.macports.checksum (libxml2)
 --->  Checksumming libxml2-2.7.7.tar.gz
 Error: Checksum (md5) mismatch for libxml2-2.7.7.tar.gz
 Portfile checksum: libxml2-2.7.7.tar.gz md5
 9abc9959823ca9ff904f1fbcf21df066
 Distfile checksum: libxml2-2.7.7.tar.gz md5
 fe92b9c732b7bdfbb3492b2c3f2a7f51
 Error: Checksum (sha1) mismatch for libxml2-2.7.7.tar.gz
 Portfile checksum: libxml2-2.7.7.tar.gz sha1
 8592824a2788574a172cbddcdc72f734ff87abe3
 Distfile checksum: libxml2-2.7.7.tar.gz sha1
 f80190a92a7f189bca128ddb9202add371fde341
 Error: Checksum (rmd160) mismatch for libxml2-2.7.7.tar.gz
 Portfile checksum: libxml2-2.7.7.tar.gz rmd160
 9f72c778c3e9e348a68eada0cf624c012658c085
 Distfile checksum: libxml2-2.7.7.tar.gz rmd160
 5e7406483d21ec6269a2e22d993c9b31a9760c84
 The correct checksum line may be:
 checksums           md5     fe92b9c732b7bdfbb3492b2c3f2a7f51 \
                     sha1    f80190a92a7f189bca128ddb9202add371fde341 \
                     rmd160  5e7406483d21ec6269a2e22d993c9b31a9760c84
 Error: Target org.macports.checksum returned: Unable to verify file
 checksums
 DEBUG: Backtrace: Unable to verify file checksums
     while executing
 "$procedure $targetname"
 Warning: the following items did not execute (for libxml2):
 org.macports.activate org.macports.extract org.macports.checksum
 org.macports.patch org.macports.configure org.macports.build
 org.macports.destroot org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>
 }}}

 Hope that's enough information.

-- 
Ticket URL: <http://trac.macports.org/ticket/24344>
MacPorts <http://www.macports.org/>
Ports system for Mac OS

More information about the macports-tickets mailing list