[MacPorts] #24490: py-wxpython build failure

MacPorts noreply at macports.org
Thu Apr 15 11:16:25 PDT 2010


#24490: py-wxpython build failure
---------------------------------------+------------------------------------
 Reporter:  spoofy@…                   |       Owner:  mww@…           
     Type:  defect                     |      Status:  new             
 Priority:  Normal                     |   Milestone:                  
Component:  ports                      |     Version:  1.8.2           
 Keywords:                             |        Port:  py-wxpython     
---------------------------------------+------------------------------------

Comment(by spoofy@…):

 just realized the -d flag was in the wrong spot... here is the debug
 output .


 {{{

 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13.1_0 exists in the ports tree
 DEBUG: libiconv 1.13.1_0  is the latest installed
 DEBUG: libiconv 1.13.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10+universal is active
 DEBUG: Merging existing variants darwin_10 universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
 DEBUG: Merging existing variants darwin_10 universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: No need to upgrade! python24 2.4.6_4 >= python24 2.4.6_4
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/wxWidgets
 DEBUG: epoch: in tree: 2 installed: 2
 DEBUG: wxWidgets 2.8.9_2 exists in the ports tree
 DEBUG: wxWidgets 2.8.9_2  is the latest installed
 DEBUG: wxWidgets 2.8.9_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/wxWidgets
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port wxWidgets.
 DEBUG: Requested variant i386 is not provided by port wxWidgets.
 DEBUG: Requested variant macosx is not provided by port wxWidgets.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jpeg 8a_0 exists in the ports tree
 DEBUG: jpeg 8a_0  is the latest installed
 DEBUG: jpeg 8a_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port jpeg.
 DEBUG: Requested variant i386 is not provided by port jpeg.
 DEBUG: Requested variant macosx is not provided by port jpeg.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! jpeg 8a_0 >= jpeg 8a_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tiff 3.9.2_3 exists in the ports tree
 DEBUG: tiff 3.9.2_3 +macosx is the latest installed
 DEBUG: tiff 3.9.2_3 +macosx+universal is active
 DEBUG: Merging existing variants macosx universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port tiff.
 DEBUG: Requested variant i386 is not provided by port tiff.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant macosx provides macosx
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.4_1 exists in the ports tree
 DEBUG: zlib 1.2.4_1  is the latest installed
 DEBUG: zlib 1.2.4_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant i386 is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! zlib 1.2.4_1 >= zlib 1.2.4_1
 DEBUG: No need to upgrade! tiff 3.9.2_3 >= tiff 3.9.2_3
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpng 1.2.43_0 exists in the ports tree
 DEBUG: libpng 1.2.43_0  is the latest installed
 DEBUG: libpng 1.2.43_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libpng.
 DEBUG: Requested variant i386 is not provided by port libpng.
 DEBUG: Requested variant macosx is not provided by port libpng.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! libpng 1.2.43_0 >= libpng 1.2.43_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libsdl 1.2.14_8 exists in the ports tree
 DEBUG: libsdl 1.2.14_8  is the latest installed
 DEBUG: libsdl 1.2.14_8 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libsdl.
 DEBUG: Requested variant i386 is not provided by port libsdl.
 DEBUG: Requested variant macosx is not provided by port libsdl.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libXext 1.1.1_0  is the latest installed
 DEBUG: xorg-libXext 1.1.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXext.
 DEBUG: Requested variant i386 is not provided by port xorg-libXext.
 DEBUG: Requested variant macosx is not provided by port xorg-libXext.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1  is the latest installed
 DEBUG: pkgconfig 0.23_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.3_0  is the latest installed
 DEBUG: xorg-libX11 1.3.3_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.7.0_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.7.0_0  is the latest installed
 DEBUG: xorg-util-macros 1.7.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.7.0_0 >= xorg-util-macros
 1.7.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0  is the latest installed
 DEBUG: xorg-libXau 1.0.5_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
 DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXrandr
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
 DEBUG: xorg-libXrandr 1.3.0_1  is the latest installed
 DEBUG: xorg-libXrandr 1.3.0_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
 DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
 DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.5_0 exists in the ports tree
 DEBUG: xrender 0.9.5_0  is the latest installed
 DEBUG: xrender 0.9.5_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xrender.
 DEBUG: Requested variant i386 is not provided by port xrender.
 DEBUG: Requested variant macosx is not provided by port xrender.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-renderproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
 DEBUG: xorg-renderproto 0.11_0  is the latest installed
 DEBUG: xorg-renderproto 0.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
 DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
 DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
 DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
 0.11_0
 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-randrproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree
 DEBUG: xorg-randrproto 1.3.1_0  is the latest installed
 DEBUG: xorg-randrproto 1.3.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
 DEBUG: Requested variant i386 is not provided by port xorg-randrproto.
 DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
 DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto
 1.3.1_0
 DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr
 1.3.0_1
 DEBUG: No need to upgrade! libsdl 1.2.14_8 >= libsdl 1.2.14_8
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libsdl_mixer
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libsdl_mixer 1.2.11_0 exists in the ports tree
 DEBUG: libsdl_mixer 1.2.11_0  is the latest installed
 DEBUG: libsdl_mixer 1.2.11_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libsdl_mixer
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libsdl_mixer.
 DEBUG: Requested variant i386 is not provided by port libsdl_mixer.
 DEBUG: Requested variant macosx is not provided by port libsdl_mixer.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: smpeg 0.4.4_8 exists in the ports tree
 DEBUG: smpeg 0.4.4_8  is the latest installed
 DEBUG: smpeg 0.4.4_8 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port smpeg.
 DEBUG: Requested variant i386 is not provided by port smpeg.
 DEBUG: Requested variant macosx is not provided by port smpeg.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6b_1 exists in the ports tree
 DEBUG: libtool 2.2.6b_1 +darwin is the latest installed
 DEBUG: libtool 2.2.6b_1 +darwin+universal is active
 DEBUG: Merging existing variants darwin universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11.1_0 exists in the ports tree
 DEBUG: automake 1.11.1_0  is the latest installed
 DEBUG: automake 1.11.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.65_1 exists in the ports tree
 DEBUG: autoconf 2.65_1  is the latest installed
 DEBUG: autoconf 2.65_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.14_0 exists in the ports tree
 DEBUG: m4 1.4.14_0  is the latest installed
 DEBUG: m4 1.4.14_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.37.1_1 exists in the ports tree
 DEBUG: help2man 1.37.1_1  is the latest installed
 DEBUG: help2man 1.37.1_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_2  is the latest installed
 DEBUG: p5-locale-gettext 1.05_2 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
 1.05_2
 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
 DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
 DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1
 DEBUG: No need to upgrade! smpeg 0.4.4_8 >= smpeg 0.4.4_8
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libvorbis 1.3.1_0 exists in the ports tree
 DEBUG: libvorbis 1.3.1_0  is the latest installed
 DEBUG: libvorbis 1.3.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libvorbis.
 DEBUG: Requested variant i386 is not provided by port libvorbis.
 DEBUG: Requested variant macosx is not provided by port libvorbis.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libogg 1.2.0_0 exists in the ports tree
 DEBUG: libogg 1.2.0_0  is the latest installed
 DEBUG: libogg 1.2.0_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libogg.
 DEBUG: Requested variant i386 is not provided by port libogg.
 DEBUG: Requested variant macosx is not provided by port libogg.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! libogg 1.2.0_0 >= libogg 1.2.0_0
 DEBUG: No need to upgrade! libvorbis 1.3.1_0 >= libvorbis 1.3.1_0
 DEBUG: No need to upgrade! libsdl_mixer 1.2.11_0 >= libsdl_mixer 1.2.11_0
 DEBUG: No need to upgrade! wxWidgets 2.8.9_2 >= wxWidgets 2.8.9_2
 --->  Computing dependencies for py-wxpython
 DEBUG: Searching for dependency: python24
 DEBUG: Found Dependency: receipt exists for python24
 DEBUG: Searching for dependency: wxWidgets
 DEBUG: Found Dependency: receipt exists for wxWidgets
 DEBUG: Executing org.macports.main (py-wxpython)
 DEBUG: Skipping completed org.macports.fetch (py-wxpython)
 DEBUG: Skipping completed org.macports.checksum (py-wxpython)
 DEBUG: setting option extract.cmd to /usr/bin/bzip2
 DEBUG: Skipping completed org.macports.extract (py-wxpython)
 DEBUG: Skipping completed org.macports.patch (py-wxpython)
 DEBUG: Skipping completed org.macports.configure (py-wxpython)
 --->  Building py-wxpython
 DEBUG: Executing org.macports.build (py-wxpython)
 DEBUG: Environment: WXPORT='mac' MACOSX_DEPLOYMENT_TARGET='10.6'
 PATH='/opt/local/lib/wx-
 devel/bin:/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin'
 UNICODE='1'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_python_py-wxpython/work/wxPython-src-2.8.9.2/wxPython"
 && /opt/local/bin/python2.4 setup.py build'
 WARNING: WXWIN not set in environment. Assuming '..'
 Found wx-config: /opt/local/bin/wx-config
     Using flags:  --toolkit=mac --unicode=yes --version=2.8
 Preparing CORE...
 Preparing GLCANVAS...
 Preparing STC...
 Preparing GIZMOS...
 running build
 running build_py
 copying wx/__version__.py -> build.unicode/lib.macosx-10.6-i386-2.4/wx
 copying wx/build/build_options.py ->
 build.unicode/lib.macosx-10.6-i386-2.4/wx/build
 package init file 'wx/tools/XRCed/plugins/__init__.py' not found (or not a
 regular file)
 package init file 'wx/tools/XRCed/plugins/__init__.py' not found (or not a
 regular file)
 running build_ext
 building '_core_' extension
 /usr/bin/gcc-4.2 -fno-strict-aliasing -fno-common -DNDEBUG -g -O3 -Wall
 -Wstrict-prototypes -DSWIG_TYPE_TABLE=_wxPython_table
 -DSWIG_PYTHON_OUTPUT_TUPLE -DWXP_USE_THREAD=1 -UNDEBUG
 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D__WXMAC__ -Iinclude -Isrc
 -I/opt/local/lib/wx/include/mac-unicode-release-2.8
 -I/opt/local/include/wx-2.8 -I/opt/local/include/python2.4 -c
 src/helpers.cpp -o build.unicode/temp.macosx-10.6-i386-2.4/src/helpers.o
 -O3
 cc1plus: warning: command line option "-Wstrict-prototypes" is valid for
 C/ObjC but not for C++
 In file included from /opt/local/include/wx-2.8/wx/platform.h:196,
                  from /opt/local/include/wx-2.8/wx/defs.h:21,
                  from /opt/local/include/wx-2.8/wx/wx.h:15,
                  from include/wx/wxPython/wxPython_int.h:19,
                  from src/helpers.cpp:16:
 /opt/local/lib/wx/include/mac-unicode-release-2.8/wx/setup.h:950:1:
 warning: "SIZEOF_VOID_P" redefined
 In file included from /opt/local/include/python2.4/Python.h:8,
                  from src/helpers.cpp:15:
 /opt/local/include/python2.4/pyconfig.h:750:1: warning: this is the
 location of the previous definition
 In file included from /opt/local/include/wx-2.8/wx/platform.h:196,
                  from /opt/local/include/wx-2.8/wx/defs.h:21,
                  from /opt/local/include/wx-2.8/wx/wx.h:15,
                  from include/wx/wxPython/wxPython_int.h:19,
                  from src/helpers.cpp:16:
 /opt/local/lib/wx/include/mac-unicode-release-2.8/wx/setup.h:953:1:
 warning: "SIZEOF_LONG" redefined
 In file included from /opt/local/include/python2.4/Python.h:8,
                  from src/helpers.cpp:15:
 /opt/local/include/python2.4/pyconfig.h:729:1: warning: this is the
 location of the previous definition
 In file included from /opt/local/include/wx-2.8/wx/memory.h:16,
                  from /opt/local/include/wx-2.8/wx/object.h:20,
                  from /opt/local/include/wx-2.8/wx/wx.h:16,
                  from include/wx/wxPython/wxPython_int.h:19,
                  from src/helpers.cpp:16:
 /opt/local/include/wx-2.8/wx/string.h: In function 'int Stricmp(const
 char*, const char*)':
 /opt/local/include/wx-2.8/wx/string.h:141: error: 'strcasecmp' was not
 declared in this scope
 src/helpers.cpp: In member function 'virtual bool wxPyApp::OnInitGui()':
 src/helpers.cpp:168: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual int wxPyApp::OnExit()':
 src/helpers.cpp:178: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual void
 wxPyApp::ExitMainLoop()':
 src/helpers.cpp:190: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual void
 wxPyApp::MacOpenFile(const wxString&)':
 src/helpers.cpp:294: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual void
 wxPyApp::MacPrintFile(const wxString&)':
 src/helpers.cpp:305: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual void wxPyApp::MacNewFile()':
 src/helpers.cpp:315: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual void
 wxPyApp::MacReopenApp()':
 src/helpers.cpp:323: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'void wxPyApp::_BootstrapApp()':
 src/helpers.cpp:421: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:422: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In function 'PyObject* __wxPySetDictionary(PyObject*,
 PyObject*)':
 src/helpers.cpp:628: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:643: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:648: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In function 'void
 wxPyOORClientData_dtor(wxPyOORClientData*)':
 src/helpers.cpp:809: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:811: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:819: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:826: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:827: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:829: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In static member function 'static wxPyCBInputStream*
 wxPyCBInputStream::create(PyObject*, bool)':
 src/helpers.cpp:1291: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:1292: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:1293: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual size_t
 wxPyCBInputStream::OnSysRead(void*, size_t)':
 src/helpers.cpp:1336: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual wxFileOffset
 wxPyCBInputStream::OnSysTell() const':
 src/helpers.cpp:1386: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In static member function 'static wxPyCBOutputStream*
 wxPyCBOutputStream::create(PyObject*, bool)':
 src/helpers.cpp:1486: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:1487: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:1488: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'virtual wxFileOffset
 wxPyCBOutputStream::OnSysTell() const':
 src/helpers.cpp:1574: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp: In member function 'void
 wxPyCallback::EventThunker(wxEvent&)':
 src/helpers.cpp:1689: warning: deprecated conversion from string constant
 to 'char*'
 src/helpers.cpp:1689: warning: deprecated conversion from string constant
 to 'char*'
 error: command '/usr/bin/gcc-4.2' failed with exit status 1
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_python_py-wxpython/work/wxPython-src-2.8.9.2/wxPython"
 && /opt/local/bin/python2.4 setup.py build " returned error 1
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_python_py-wxpython/work/wxPython-src-2.8.9.2/wxPython"
 && /opt/local/bin/python2.4 setup.py build " returned error 1
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for py-wxpython):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>
 bash-3.2#

 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/24490#comment:4>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list