[MacPorts] #24560: smpeg fails to install

MacPorts noreply at macports.org
Mon Apr 19 20:00:07 PDT 2010


#24560: smpeg fails to install
--------------------------------------+-------------------------------------
 Reporter:  andrew.t.shaw7@…          |       Owner:  macports-tickets@…                   
     Type:  defect                    |      Status:  new                                  
 Priority:  Normal                    |   Milestone:                                       
Component:  ports                     |     Version:  1.8.2                                
 Keywords:  smpeg                     |        Port:                                       
--------------------------------------+-------------------------------------
 smpeg install keeps failing.  Get the below from the debug.  Please help.
 Thank you.

 tigger:smpeg andrewshaw$ sudo port -d install smpeg
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port smpeg.
 DEBUG: Requested variant i386 is not provided by port smpeg.
 DEBUG: Requested variant macosx is not provided by port smpeg.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libsdl 1.2.14_8 exists in the ports tree
 DEBUG: libsdl 1.2.14_8 +universal is the latest installed
 DEBUG: libsdl 1.2.14_8 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libsdl.
 DEBUG: Requested variant i386 is not provided by port libsdl.
 DEBUG: Requested variant macosx is not provided by port libsdl.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libXext 1.1.1_0 +universal is the latest installed
 DEBUG: xorg-libXext 1.1.1_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXext.
 DEBUG: Requested variant i386 is not provided by port xorg-libXext.
 DEBUG: Requested variant macosx is not provided by port xorg-libXext.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1 +universal is the latest installed
 DEBUG: pkgconfig 0.23_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.3_0 +universal is the latest installed
 DEBUG: xorg-libX11 1.3.3_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.7.0_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.7.0_0  is the latest installed
 DEBUG: xorg-util-macros 1.7.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.7.0_0 >= xorg-util-macros
 1.7.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0 +universal is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0 +universal is the latest installed
 DEBUG: xorg-libXau 1.0.5_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
 DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXrandr
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
 DEBUG: xorg-libXrandr 1.3.0_1 +universal is the latest installed
 DEBUG: xorg-libXrandr 1.3.0_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
 DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
 DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.5_0 exists in the ports tree
 DEBUG: xrender 0.9.5_0 +universal is the latest installed
 DEBUG: xrender 0.9.5_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xrender.
 DEBUG: Requested variant i386 is not provided by port xrender.
 DEBUG: Requested variant macosx is not provided by port xrender.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-renderproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
 DEBUG: xorg-renderproto 0.11_0  is the latest installed
 DEBUG: xorg-renderproto 0.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
 DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
 DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
 DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
 0.11_0
 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-randrproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree
 DEBUG: xorg-randrproto 1.3.1_0  is the latest installed
 DEBUG: xorg-randrproto 1.3.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
 DEBUG: Requested variant i386 is not provided by port xorg-randrproto.
 DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
 DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto
 1.3.1_0
 DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr
 1.3.0_1
 DEBUG: No need to upgrade! libsdl 1.2.14_8 >= libsdl 1.2.14_8
 --->  Computing dependencies for smpeg
 DEBUG: Searching for dependency: libsdl
 DEBUG: Found Dependency: receipt exists for libsdl
 DEBUG: Searching for dependency: libtool
 DEBUG: Didn't find receipt, going to depspec regex for: libtool
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: automake
 DEBUG: Didn't find receipt, going to depspec regex for: automake
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: perl5
 DEBUG: Didn't find receipt, going to depspec regex for: perl5
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant universal is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Searching for dependency: autoconf
 DEBUG: Didn't find receipt, going to depspec regex for: autoconf
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant universal is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Searching for dependency: perl5.8
 DEBUG: Didn't find receipt, going to depspec regex for: perl5.8
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: perl5
 DEBUG: Didn't find receipt, going to depspec regex for: perl5
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: Searching for dependency: m4
 DEBUG: Didn't find receipt, going to depspec regex for: m4
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: help2man
 DEBUG: Didn't find receipt, going to depspec regex for: help2man
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: perl5
 DEBUG: Didn't find receipt, going to depspec regex for: perl5
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: Searching for dependency: p5-locale-gettext
 DEBUG: Didn't find receipt, going to depspec regex for: p5-locale-gettext
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: gettext
 DEBUG: Didn't find receipt, going to depspec regex for: gettext
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: libiconv
 DEBUG: Didn't find receipt, going to depspec regex for: libiconv
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: perl5
 DEBUG: Didn't find receipt, going to depspec regex for: perl5
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: Searching for dependency: gettext
 DEBUG: Didn't find receipt, going to depspec regex for: gettext
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: Searching for dependency: libiconv
 DEBUG: Didn't find receipt, going to depspec regex for: libiconv
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: Searching for dependency: libiconv
 DEBUG: Didn't find receipt, going to depspec regex for: libiconv
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: Searching for dependency: ncurses
 DEBUG: Didn't find receipt, going to depspec regex for: ncurses
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Searching for dependency: expat
 DEBUG: Didn't find receipt, going to depspec regex for: expat
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: Executing variant universal provides universal
 DEBUG: Searching for dependency: ncursesw
 DEBUG: Didn't find receipt, going to depspec regex for: ncursesw
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Searching for dependency: gperf
 DEBUG: Didn't find receipt, going to depspec regex for: gperf
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.3.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: Executing variant universal provides universal
 --->  Activating expat @2.0.1_0+universal
 Error: The following dependencies failed to build: libtool automake
 autoconf help2man gettext expat libiconv gperf ncurses ncursesw p5-locale-
 gettext perl5 perl5.8 m4
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>

-- 
Ticket URL: <http://trac.macports.org/ticket/24560>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list