[MacPorts] #24577: i386-elf-gcc configure error with build_arch i386

MacPorts noreply at macports.org
Wed Apr 21 06:52:08 PDT 2010


#24577: i386-elf-gcc configure error with build_arch i386
-------------------------------------+--------------------------------------
 Reporter:  orphen.leiliu@…          |       Owner:  stepan@…             
     Type:  defect                   |      Status:  new                  
 Priority:  Normal                   |   Milestone:                       
Component:  ports                    |     Version:  1.8.2                
 Keywords:                           |        Port:  i386-elf-gcc         
-------------------------------------+--------------------------------------
Changes (by jmr@…):

  * owner:  macports-tickets@… => stepan@…
  * keywords:  i386-elf-gcc mpfr =>


Old description:

> Snow Leopard 10.6.3; Xcode 3.2.2; Macports 1.8.2
> ----
> There is no problem with build_arch x86_64.
> Error followed.
> ----
> localhost ~ $ sudo port -d install i386-elf-gcc
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/i386
> -elf-gcc
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/i386
> -elf-gcc
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port i386-elf-gcc.
> DEBUG: Requested variant ipv6 is not provided by port i386-elf-gcc.
> DEBUG: Requested variant i386 is not provided by port i386-elf-gcc.
> DEBUG: Requested variant doc is not provided by port i386-elf-gcc.
> DEBUG: Requested variant no_x11 is not provided by port i386-elf-gcc.
> DEBUG: Requested variant macosx is not provided by port i386-elf-gcc.
> DEBUG: Requested variant svn is not provided by port i386-elf-gcc.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/i386
> -elf-binutils
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: i386-elf-binutils 2.18.50.0.9_0 exists in the ports tree
> DEBUG: i386-elf-binutils 2.18.50.0.9_0 +darwin_10 is the latest installed
> DEBUG: i386-elf-binutils 2.18.50.0.9_0 +darwin_10 is active
> DEBUG: Merging existing variants darwin_10 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/i386
> -elf-binutils
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: adding the default universal variant
> DEBUG: Requested variant darwin is not provided by port i386-elf-
> binutils.
> DEBUG: Requested variant i386 is not provided by port i386-elf-binutils.
> DEBUG: Requested variant macosx is not provided by port i386-elf-
> binutils.
> DEBUG: Executing variant darwin_10 provides darwin_10
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_4 exists in the ports tree
> DEBUG: gettext 0.17_4  is the latest installed
> DEBUG: gettext 0.17_4  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gettext.
> DEBUG: Requested variant i386 is not provided by port gettext.
> DEBUG: Requested variant macosx is not provided by port gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.13.1_0 exists in the ports tree
> DEBUG: libiconv 1.13.1_0  is the latest installed
> DEBUG: libiconv 1.13.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libiconv.
> DEBUG: Requested variant i386 is not provided by port libiconv.
> DEBUG: Requested variant macosx is not provided by port libiconv.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.4_0 exists in the ports tree
> DEBUG: gperf 3.0.4_0  is the latest installed
> DEBUG: gperf 3.0.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gperf.
> DEBUG: Requested variant i386 is not provided by port gperf.
> DEBUG: Requested variant macosx is not provided by port gperf.
> DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
> DEBUG: ncurses 5.7_0 +darwin_10 is active
> DEBUG: Merging existing variants darwin_10 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncurses.
> DEBUG: Requested variant i386 is not provided by port ncurses.
> DEBUG: Requested variant macosx is not provided by port ncurses.
> DEBUG: Executing variant darwin_10 provides darwin_10
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
> DEBUG: ncursesw 5.7_0 +darwin_10 is active
> DEBUG: Merging existing variants darwin_10 into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncursesw.
> DEBUG: Requested variant i386 is not provided by port ncursesw.
> DEBUG: Requested variant macosx is not provided by port ncursesw.
> DEBUG: Executing variant darwin_10 provides darwin_10
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0  is the latest installed
> DEBUG: expat 2.0.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port expat.
> DEBUG: Requested variant i386 is not provided by port expat.
> DEBUG: Requested variant macosx is not provided by port expat.
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> DEBUG: No need to upgrade! i386-elf-binutils 2.18.50.0.9_0 >= i386-elf-
> binutils 2.18.50.0.9_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gmp 5.0.1_0 exists in the ports tree
> DEBUG: gmp 5.0.1_0  is the latest installed
> DEBUG: gmp 5.0.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gmp.
> DEBUG: Requested variant i386 is not provided by port gmp.
> DEBUG: Requested variant macosx is not provided by port gmp.
> DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree
> DEBUG: mpfr 2.4.2-p1_0  is the latest installed
> DEBUG: mpfr 2.4.2-p1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 10.3.0
> DEBUG: Mac OS X Version: 10.6
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.unload registered provides 'unload', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port mpfr.
> DEBUG: Requested variant i386 is not provided by port mpfr.
> DEBUG: Requested variant macosx is not provided by port mpfr.
> DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0
> --->  Computing dependencies for i386-elf-gcc
> DEBUG: Searching for dependency: i386-elf-binutils
> DEBUG: Found Dependency: receipt exists for i386-elf-binutils
> DEBUG: Searching for dependency: gmp
> DEBUG: Found Dependency: receipt exists for gmp
> DEBUG: Searching for dependency: mpfr
> DEBUG: Found Dependency: receipt exists for mpfr
> DEBUG: Searching for dependency: gettext
> DEBUG: Found Dependency: receipt exists for gettext
> DEBUG: Executing org.macports.main (i386-elf-gcc)
> DEBUG: Skipping completed org.macports.fetch (i386-elf-gcc)
> DEBUG: Skipping completed org.macports.checksum (i386-elf-gcc)
> DEBUG: setting option extract.cmd to /usr/bin/bzip2
> DEBUG: Skipping completed org.macports.extract (i386-elf-gcc)
> DEBUG: Skipping completed org.macports.patch (i386-elf-gcc)
> --->  Configuring i386-elf-gcc
> DEBUG: Using compiler 'Mac OS X gcc 4.2'
> DEBUG: Executing proc-pre-org.macports.configure-configure-0
> DEBUG: Executing org.macports.configure (i386-elf-gcc)
> DEBUG: Environment: AS_FOR_TARGET='i386-elf-as' CFLAGS='-O2'
> CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2'
> MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2
> -m32' LD_FOR_TARGET='i386-elf-ld' RANLIB_FOR_TARGET='i386-elf-ranlib'
> LDFLAGS='-L/opt/local/lib' FCFLAGS='-O2 -m32' OBJC='/usr/bin/gcc-4.2'
> INSTALL='/usr/bin/install -c' AR_FOR_TARGET='i386-elf-ar'
> NM_FOR_TARGET='i386-elf-nm' FFLAGS='-O2 -m32' OBJCFLAGS='-O2' CC='cc -no-
> cpp-precomp -I/opt/local/include'
> DEBUG: Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386
> -elf-gcc/work/build" &&
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386
> -elf-gcc/work/gcc-4.3.2/configure --prefix=/opt/local
> --infodir='/opt/local/share/info' --mandir='/opt/local/share/man'
> --target=i386-elf --program-prefix=i386-elf- --program-suffix=-4.3.2
> --without-included-gettext --enable-obsolete --with-newlib --disable-
> libgfortran --with-gxx-include-dir=/opt/local/i386-elf/include/c++/4.3.2/
> --enable-languages="c,c++,objc"'
> checking build system type... i386-apple-darwin10.3.0
> checking host system type... i386-apple-darwin10.3.0
> checking target system type... i386-pc-elf
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether ln works... yes
> checking whether ln -s works... yes
> checking for gcc... cc -no-cpp-precomp -I/opt/local/include
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc -no-cpp-precomp -I/opt/local/include accepts -g...
> yes
> checking for cc -no-cpp-precomp -I/opt/local/include option to accept
> ANSI C... none needed
> checking whether we are using the GNU C++ compiler... yes
> checking whether /usr/bin/g++-4.2 accepts -g... yes
> checking for gnatbind... no
> checking for gnatmake... no
> checking whether compiler driver understands Ada... no
> checking how to compare bootstrapped objects... cmp --ignore-initial=16
> $$f1 $$f2
> checking for correct version of gmp.h... yes
> checking for correct version of mpfr.h... no
> configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
> Try the --with-gmp and/or --with-mpfr options to specify their locations.
> Copies of these libraries' source code can be found at their respective
> hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
> See also http://gcc.gnu.org/install/prerequisites.html for additional
> info.
> If you obtained GMP and/or MPFR from a vendor distribution package, make
> sure that you have installed both the libraries and the header files.
> They may be located in separate packages.
> Error: Target org.macports.configure returned: configure failure: shell
> command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386
> -elf-gcc/work/build" &&
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386
> -elf-gcc/work/gcc-4.3.2/configure --prefix=/opt/local
> --infodir='/opt/local/share/info' --mandir='/opt/local/share/man'
> --target=i386-elf --program-prefix=i386-elf- --program-suffix=-4.3.2
> --without-included-gettext --enable-obsolete --with-newlib --disable-
> libgfortran --with-gxx-include-dir=/opt/local/i386-elf/include/c++/4.3.2/
> --enable-languages="c,c++,objc" " returned error 1
> DEBUG: Backtrace: configure failure: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386
> -elf-gcc/work/build" &&
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386
> -elf-gcc/work/gcc-4.3.2/configure --prefix=/opt/local
> --infodir='/opt/local/share/info' --mandir='/opt/local/share/man'
> --target=i386-elf --program-prefix=i386-elf- --program-suffix=-4.3.2
> --without-included-gettext --enable-obsolete --with-newlib --disable-
> libgfortran --with-gxx-include-dir=/opt/local/i386-elf/include/c++/4.3.2/
> --enable-languages="c,c++,objc" " returned error 1
>     while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for i386-elf-gcc):
> org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
> localhost ~ $ sudo port installed
> The following ports are currently installed:
>   bash-completion @1.1_6 (active)
>   cscope @15.7a_0 (active)
>   ctags @5.8_0 (active)
>   curl @7.20.0_0+ssl (active)
>   curl-ca-bundle @7.20.0_3 (active)
>   expat @2.0.1_0 (active)
>   findutils @4.4.2_0 (active)
>   gettext @0.17_4 (active)
>   git-core @1.7.0.4_0 (active)
>   gmp @5.0.1_0 (active)
>   gperf @3.0.4_0 (active)
>   gsed @4.2.1_0 (active)
>   i386-elf-binutils @2.18.50.0.9_0+darwin_10 (active)
>   libiconv @1.13.1_0 (active)
>   libidn @1.16_0 (active)
>   mpfr @2.4.2-p1_0 (active)
>   ncurses @5.7_0+darwin_10 (active)
>   ncursesw @5.7_0+darwin_10 (active)
>   openssl @0.9.8n_0+darwin (active)
>   p5-error @0.17016_0 (active)
>   perl5 @5.8.9_0 (active)
>   perl5.8 @5.8.9_3 (active)
>   pkgconfig @0.23_1 (active)
>   popt @1.15_0 (active)
>   rsync @3.0.7_0 (active)
>   zlib @1.2.4_1 (active)
> localhost ~ $
> ----
> The all ports were build with build_arch i386.

New description:

 Snow Leopard 10.6.3; Xcode 3.2.2; Macports 1.8.2
 ----
 There is no problem with build_arch x86_64.
 Error followed.

 The all ports were build with build_arch i386.

--

Comment:

 Please remember to cc the maintainer.

-- 
Ticket URL: <http://trac.macports.org/ticket/24577#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list