[MacPorts] #24608: ImagickMagick fails to build on 10.5.8
MacPorts
noreply at macports.org
Thu Apr 22 20:28:11 PDT 2010
#24608: ImagickMagick fails to build on 10.5.8
-----------------------------------+----------------------------------------
Reporter: mark.mertel@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: | Port:
-----------------------------------+----------------------------------------
mmertel-ibook:gettext-1.05 mmertel$ sudo port -d install ImageMagick
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ImageMagick
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ImageMagick
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port ImageMagick.
DEBUG: Requested variant darwin is not provided by port ImageMagick.
DEBUG: Requested variant macosx is not provided by port ImageMagick.
DEBUG: Executing variant q16 provides q16
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 8a_0 exists in the ports tree
DEBUG: jpeg 8a_0 is the latest installed
DEBUG: jpeg 8a_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port jpeg.
DEBUG: Requested variant darwin is not provided by port jpeg.
DEBUG: Requested variant macosx is not provided by port jpeg.
DEBUG: No need to upgrade! jpeg 8a_0 >= jpeg 8a_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.9.2_3 exists in the ports tree
DEBUG: tiff 3.9.2_3 +macosx is the latest installed
DEBUG: tiff 3.9.2_3 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port tiff.
DEBUG: Requested variant darwin is not provided by port tiff.
DEBUG: Executing variant macosx provides macosx
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0 is the latest installed
DEBUG: zlib 1.2.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port zlib.
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: No need to upgrade! tiff 3.9.2_3 >= tiff 3.9.2_3
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port libiconv.
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gperf.
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port expat.
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
---> Computing dependencies for ImageMagick
DEBUG: Checking for conflicts against ImageMagick
DEBUG: Searching for dependency: cryptlib
DEBUG: Didn't find receipt, going to depspec regex for: cryptlib
DEBUG: Searching for dependency: p7zip
DEBUG: Didn't find receipt, going to depspec regex for: p7zip
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/p7zip
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/p7zip
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port p7zip.
DEBUG: Requested variant darwin is not provided by port p7zip.
DEBUG: Requested variant macosx is not provided by port p7zip.
DEBUG: Searching for dependency: xorg-libXext
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXext
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXext
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXext.
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: Searching for dependency: xorg-libXt
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXt
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXt
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXt.
DEBUG: Requested variant darwin is not provided by port xorg-libXt.
DEBUG: Requested variant macosx is not provided by port xorg-libXt.
DEBUG: Searching for dependency: bzip2
DEBUG: Didn't find receipt, going to depspec regex for: bzip2
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: Searching for dependency: jpeg
DEBUG: Found Dependency: receipt exists for jpeg
DEBUG: Searching for dependency: lcms
DEBUG: Didn't find receipt, going to depspec regex for: lcms
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port lcms.
DEBUG: Requested variant darwin is not provided by port lcms.
DEBUG: Requested variant macosx is not provided by port lcms.
DEBUG: Searching for dependency: libpng
DEBUG: Didn't find receipt, going to depspec regex for: libpng
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port libpng.
DEBUG: Requested variant darwin is not provided by port libpng.
DEBUG: Requested variant macosx is not provided by port libpng.
DEBUG: Searching for dependency: tiff
DEBUG: Found Dependency: receipt exists for tiff
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: freetype
DEBUG: Didn't find receipt, going to depspec regex for: freetype
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port freetype.
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Executing variant macosx provides macosx
DEBUG: Searching for dependency: fontconfig
DEBUG: Didn't find receipt, going to depspec regex for: fontconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port fontconfig.
DEBUG: Requested variant darwin is not provided by port fontconfig.
DEBUG: Executing variant macosx provides macosx
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: libxml2
DEBUG: Didn't find receipt, going to depspec regex for: libxml2
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port libxml2.
DEBUG: Requested variant darwin is not provided by port libxml2.
DEBUG: Requested variant macosx is not provided by port libxml2.
DEBUG: Searching for dependency: pkgconfig
DEBUG: Didn't find receipt, going to depspec regex for: pkgconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port pkgconfig.
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: Searching for dependency: autoconf
DEBUG: Didn't find receipt, going to depspec regex for: autoconf
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port autoconf.
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Searching for dependency: automake
DEBUG: Didn't find receipt, going to depspec regex for: automake
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port automake.
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Searching for dependency: libtool
DEBUG: Didn't find receipt, going to depspec regex for: libtool
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Executing variant darwin provides darwin
DEBUG: Searching for dependency: xorg-libX11
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libX11
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libX11
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libX11.
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Searching for dependency: xorg-xextproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xextproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xextproto
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xextproto.
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: Searching for dependency: pkgconfig
DEBUG: Didn't find receipt, going to depspec regex for: pkgconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: Searching for dependency: xorg-libXdmcp
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXdmcp
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXdmcp
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXdmcp.
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: Searching for dependency: xorg-libXau
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXau
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXau
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libXau.
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: Searching for dependency: xorg-xproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xproto
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xproto.
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: Searching for dependency: xorg-kbproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-kbproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-kbproto
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-kbproto.
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: Searching for dependency: pkgconfig
DEBUG: Didn't find receipt, going to depspec regex for: pkgconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: Searching for dependency: xorg-util-macros
DEBUG: Didn't find receipt, going to depspec regex for: xorg-util-macros
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-util-macros
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-util-macros.
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: Searching for dependency: xorg-xtrans
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xtrans
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xtrans
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xtrans.
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: Searching for dependency: xorg-bigreqsproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-bigreqsproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-bigreqsproto
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-
bigreqsproto.
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: Searching for dependency: xorg-xcmiscproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xcmiscproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xcmiscproto
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: Searching for dependency: xorg-xextproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xextproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xextproto
DEBUG: Searching for dependency: xorg-xf86bigfontproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-
xf86bigfontproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xf86bigfontproto
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-
xf86bigfontproto.
DEBUG: Requested variant darwin is not provided by port xorg-
xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-
xf86bigfontproto.
DEBUG: Searching for dependency: xorg-inputproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-inputproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-inputproto
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant powerpc is not provided by port xorg-inputproto.
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: Searching for dependency: pkgconfig
DEBUG: Didn't find receipt, going to depspec regex for: pkgconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: Searching for dependency: xorg-xproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xproto
DEBUG: Searching for dependency: xorg-xproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xproto
DEBUG: Searching for dependency: pkgconfig
DEBUG: Didn't find receipt, going to depspec regex for: pkgconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: Searching for dependency: xorg-libsm
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libsm
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libsm
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libsm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libsm.
DEBUG: Requested variant darwin is not provided by port xorg-libsm.
DEBUG: Requested variant macosx is not provided by port xorg-libsm.
DEBUG: Searching for dependency: xorg-libX11
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libX11
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libX11
DEBUG: Searching for dependency: pkgconfig
DEBUG: Didn't find receipt, going to depspec regex for: pkgconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: Searching for dependency: xorg-util-macros
DEBUG: Didn't find receipt, going to depspec regex for: xorg-util-macros
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-util-macros
DEBUG: Searching for dependency: xorg-libice
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libice
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libice
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libice
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port xorg-libice.
DEBUG: Requested variant darwin is not provided by port xorg-libice.
DEBUG: Requested variant macosx is not provided by port xorg-libice.
DEBUG: Searching for dependency: pkgconfig
DEBUG: Didn't find receipt, going to depspec regex for: pkgconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: Searching for dependency: xorg-xtrans
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xtrans
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xtrans
DEBUG: Searching for dependency: xorg-xproto
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xproto
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xproto
DEBUG: Searching for dependency: pkgconfig
DEBUG: Didn't find receipt, going to depspec regex for: pkgconfig
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: Searching for dependency: xorg-xtrans
DEBUG: Didn't find receipt, going to depspec regex for: xorg-xtrans
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xtrans
DEBUG: Searching for dependency: jpeg
DEBUG: Found Dependency: receipt exists for jpeg
DEBUG: Searching for dependency: tiff
DEBUG: Found Dependency: receipt exists for tiff
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: freetype
DEBUG: Didn't find receipt, going to depspec regex for: freetype
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: m4
DEBUG: Didn't find receipt, going to depspec regex for: m4
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port m4.
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: Searching for dependency: help2man
DEBUG: Didn't find receipt, going to depspec regex for: help2man
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port help2man.
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: p5-locale-gettext
DEBUG: Didn't find receipt, going to depspec regex for: p5-locale-gettext
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port p5-locale-
gettext.
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: autoconf
DEBUG: Didn't find receipt, going to depspec regex for: autoconf
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: Searching for dependency: automake
DEBUG: Didn't find receipt, going to depspec regex for: automake
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: Executing org.macports.main (p5-locale-gettext)
DEBUG: Skipping completed org.macports.fetch (p5-locale-gettext)
DEBUG: Skipping completed org.macports.checksum (p5-locale-gettext)
DEBUG: Skipping completed org.macports.extract (p5-locale-gettext)
DEBUG: Skipping completed org.macports.patch (p5-locale-gettext)
DEBUG: Skipping completed org.macports.configure (p5-locale-gettext)
DEBUG: Skipping completed org.macports.build (p5-locale-gettext)
---> Staging p5-locale-gettext into destroot
. missing (directory not created: File exists)
./Applications missing (directory not created: File exists)
./Developer missing (directory not created: File exists)
./Library missing (directory not created: File exists)
DEBUG: Executing org.macports.destroot (p5-locale-gettext)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5
-locale-gettext/work/gettext-1.05" && /usr/bin/make pure_install
DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5
-locale-gettext/work/destroot'
Files found in blib/arch: installing files in blib/lib into architecture
dependent library tree
Writing
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5
-locale-gettext/work/destroot/opt/local/lib/perl5/site_perl/5.8.9/darwin-
2level/auto/Locale/gettext/.packlist
DEBUG: Executing proc-post-org.macports.destroot-destroot-0
Error: Target org.macports.destroot returned: no such file or directory
DEBUG: Backtrace: no such file or directory
while executing
"$post $targetname"
Warning: the following items did not execute (for p5-locale-gettext):
org.macports.activate org.macports.destroot org.macports.install
Error: The following dependencies failed to build: autoconf help2man p5
-locale-gettext m4 automake bzip2 fontconfig freetype lcms libpng libtool
libxml2 p7zip pkgconfig xorg-libXext xorg-libX11 xorg-bigreqsproto xorg-
inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-util-
macros xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans
xorg-libXt xorg-libsm xorg-libice
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
mmertel-ibook:gettext-1.05 mmertel$
--
Ticket URL: <http://trac.macports.org/ticket/24608>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list