[MacPorts] #26275: wine-devel: OpenSSL 32-bit development files not found, SSL won't be supported. (was: during the wine install it says the shell command fails)

MacPorts noreply at macports.org
Sun Aug 29 13:52:49 PDT 2010


#26275: wine-devel: OpenSSL 32-bit development files not found, SSL won't be
supported.
------------------------------------+---------------------------------------
  Reporter:  tristanxlitch@…        |       Owner:  macports-tickets@…                   
      Type:  defect                 |      Status:  closed                               
  Priority:  Normal                 |   Milestone:                                       
 Component:  ports                  |     Version:  1.9.1                                
Resolution:  duplicate              |    Keywords:                                       
      Port:  wine-devel             |  
------------------------------------+---------------------------------------
Changes (by ryandesign@…):

  * status:  new => closed
 * cc: ryandesign@… (added)
  * milestone:  MacPorts 1.9.2 =>
  * keywords:  wine-devel =>
  * resolution:  => duplicate
  * port:  => wine-devel


Old description:

> here is my log any thoughts?
>
> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main flex 2.5.35_0 exists in the ports tree
> :debug:main flex 2.5.35_0 +universal is the latest installed
> :debug:main flex 2.5.35_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main pkgconfig 0.25_1 exists in the ports tree
> :debug:main pkgconfig 0.25_1 +universal is the latest installed
> :debug:main pkgconfig 0.25_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! pkgconfig 0.25_1 >= pkgconfig 0.25_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.0.1_0 exists in the ports tree
> :debug:main expat 2.0.1_0 +universal is the latest installed
> :debug:main expat 2.0.1_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main fontconfig 2.8.0_0 exists in the ports tree
> :debug:main fontconfig 2.8.0_0 +universal is the latest installed
> :debug:main fontconfig 2.8.0_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.13.1_0 exists in the ports tree
> :debug:main libiconv 1.13.1_0 +universal is the latest installed
> :debug:main libiconv 1.13.1_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main freetype 2.4.2_0 exists in the ports tree
> :debug:main freetype 2.4.2_0 +universal is the latest installed
> :debug:main freetype 2.4.2_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! freetype 2.4.2_0 >= freetype 2.4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.5_0 exists in the ports tree
> :debug:main zlib 1.2.5_0 +universal is the latest installed
> :debug:main zlib 1.2.5_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gnutls 2.8.6_0 exists in the ports tree
> :debug:main gnutls 2.8.6_0 +universal is the latest installed
> :debug:main gnutls 2.8.6_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gnutls
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! gnutls 2.8.6_0 >= gnutls 2.8.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libtasn1 2.2_0 exists in the ports tree
> :debug:main libtasn1 2.2_0 +universal is the latest installed
> :debug:main libtasn1 2.2_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libtasn1 2.2_0 >= libtasn1 2.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main opencdk 0.6.6_0 exists in the ports tree
> :debug:main opencdk 0.6.6_0 +universal is the latest installed
> :debug:main opencdk 0.6.6_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opencdk
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! opencdk 0.6.6_0 >= opencdk 0.6.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libgcrypt 1.4.6_0 exists in the ports tree
> :debug:main libgcrypt 1.4.6_0 +universal is the latest installed
> :debug:main libgcrypt 1.4.6_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libgcrypt 1.4.6_0 >= libgcrypt 1.4.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libgpg-error 1.9_0 exists in the ports tree
> :debug:main libgpg-error 1.9_0 +universal is the latest installed
> :debug:main libgpg-error 1.9_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
> /libgpg-error
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libgpg-error 1.9_0 >= libgpg-error 1.9_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2 +universal is the latest installed
> :debug:main gettext 0.18.1.1_2 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.7_0 exists in the ports tree
> :debug:main ncurses 5.7_0 +universal is the latest installed
> :debug:main ncurses 5.7_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncursesw 5.7_0 exists in the ports tree
> :debug:main ncursesw 5.7_0 +universal is the latest installed
> :debug:main ncursesw 5.7_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lzo 1.08_0 exists in the ports tree
> :debug:main lzo 1.08_0 +universal is the latest installed
> :debug:main lzo 1.08_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/lzo
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! lzo 1.08_0 >= lzo 1.08_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main readline 6.1.000_1 exists in the ports tree
> :debug:main readline 6.1.000_1 +universal is the latest installed
> :debug:main readline 6.1.000_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main jpeg 8b_0 exists in the ports tree
> :debug:main jpeg 8b_0 +universal is the latest installed
> :debug:main jpeg 8b_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main lcms 1.19_2 exists in the ports tree
> :debug:main lcms 1.19_2 +universal is the latest installed
> :debug:main lcms 1.19_2 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main tiff 3.9.4_0 exists in the ports tree
> :debug:main tiff 3.9.4_0 +universal is the latest installed
> :debug:main tiff 3.9.4_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpng 1.2.44_0 exists in the ports tree
> :debug:main libpng 1.2.44_0 +universal is the latest installed
> :debug:main libpng 1.2.44_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libxml2 2.7.7_0 exists in the ports tree
> :debug:main libxml2 2.7.7_0 +universal is the latest installed
> :debug:main libxml2 2.7.7_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libxslt 1.1.26_0 exists in the ports tree
> :debug:main libxslt 1.1.26_0 +universal is the latest installed
> :debug:main libxslt 1.1.26_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main openssl 1.0.0a_0 exists in the ports tree
> :debug:main openssl 1.0.0a_0 +universal is the latest installed
> :debug:main openssl 1.0.0a_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! openssl 1.0.0a_0 >= openssl 1.0.0a_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libsm 1.1.1_0 exists in the ports tree
> :debug:main xorg-libsm 1.1.1_0 +universal is the latest installed
> :debug:main xorg-libsm 1.1.1_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libsm
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libice 1.0.6_0 exists in the ports tree
> :debug:main xorg-libice 1.0.6_0 +universal is the latest installed
> :debug:main xorg-libice 1.0.6_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libice
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice
> 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xproto 7.0.18_0 exists in the ports tree
> :debug:main xorg-xproto 7.0.18_0  is the latest installed
> :debug:main xorg-xproto 7.0.18_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> xproto.
> :debug:main No need to upgrade! xorg-xproto 7.0.18_0 >= xorg-xproto
> 7.0.18_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXcomposite 0.4.2_0 exists in the ports tree
> :debug:main xorg-libXcomposite 0.4.2_0 +universal is the latest installed
> :debug:main xorg-libXcomposite 0.4.2_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXcomposite
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXcomposite 0.4.2_0 >= xorg-
> libXcomposite 0.4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXfixes 4.0.5_0 exists in the ports tree
> :debug:main xorg-libXfixes 4.0.5_0 +universal is the latest installed
> :debug:main xorg-libXfixes 4.0.5_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXfixes
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXfixes 4.0.5_0 >= xorg-libXfixes
> 4.0.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libX11 1.3.5_0 exists in the ports tree
> :debug:main xorg-libX11 1.3.5_0 +universal is the latest installed
> :debug:main xorg-libX11 1.3.5_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libX11 1.3.5_0 >= xorg-libX11
> 1.3.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree
> :debug:main xorg-libXdmcp 1.0.3_0 +universal is the latest installed
> :debug:main xorg-libXdmcp 1.0.3_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp
> 1.0.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXau 1.0.6_0 exists in the ports tree
> :debug:main xorg-libXau 1.0.6_0 +universal is the latest installed
> :debug:main xorg-libXau 1.0.6_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau
> 1.0.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
> :debug:main xorg-kbproto 1.0.5_0  is the latest installed
> :debug:main xorg-kbproto 1.0.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> kbproto.
> :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
> 1.0.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-fixesproto 4.1.1_0 exists in the ports tree
> :debug:main xorg-fixesproto 4.1.1_0  is the latest installed
> :debug:main xorg-fixesproto 4.1.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-fixesproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> fixesproto.
> :debug:main No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-
> fixesproto 4.1.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXext 1.1.2_0 exists in the ports tree
> :debug:main xorg-libXext 1.1.2_0 +universal is the latest installed
> :debug:main xorg-libXext 1.1.2_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext
> 1.1.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xextproto 7.1.2_0 exists in the ports tree
> :debug:main xorg-xextproto 7.1.2_0  is the latest installed
> :debug:main xorg-xextproto 7.1.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> xextproto.
> :debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto
> 7.1.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-compositeproto 0.4.1_0 exists in the ports tree
> :debug:main xorg-compositeproto 0.4.1_0  is the latest installed
> :debug:main xorg-compositeproto 0.4.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-compositeproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> compositeproto.
> :debug:main No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-
> compositeproto 0.4.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXcursor 1.1.10_0 exists in the ports tree
> :debug:main xorg-libXcursor 1.1.10_0 +universal is the latest installed
> :debug:main xorg-libXcursor 1.1.10_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXcursor
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-
> libXcursor 1.1.10_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xrender 0.9.6_0 exists in the ports tree
> :debug:main xrender 0.9.6_0 +universal is the latest installed
> :debug:main xrender 0.9.6_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
> :debug:main xorg-renderproto 0.11.1_0  is the latest installed
> :debug:main xorg-renderproto 0.11.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-renderproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> renderproto.
> :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
> renderproto 0.11.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXi 1.3.2_0 exists in the ports tree
> :debug:main xorg-libXi 1.3.2_0 +universal is the latest installed
> :debug:main xorg-libXi 1.3.2_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXi
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXi 1.3.2_0 >= xorg-libXi 1.3.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-inputproto 2.0_0 exists in the ports tree
> :debug:main xorg-inputproto 2.0_0  is the latest installed
> :debug:main xorg-inputproto 2.0_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-inputproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> inputproto.
> :debug:main No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto
> 2.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXinerama 1.1_0 exists in the ports tree
> :debug:main xorg-libXinerama 1.1_0 +universal is the latest installed
> :debug:main xorg-libXinerama 1.1_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXinerama
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-
> libXinerama 1.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xineramaproto 1.2_0 exists in the ports tree
> :debug:main xorg-xineramaproto 1.2_0  is the latest installed
> :debug:main xorg-xineramaproto 1.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xineramaproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> xineramaproto.
> :debug:main No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-
> xineramaproto 1.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXrandr 1.3.0_1 exists in the ports tree
> :debug:main xorg-libXrandr 1.3.0_1 +universal is the latest installed
> :debug:main xorg-libXrandr 1.3.0_1 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXrandr
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr
> 1.3.0_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-randrproto 1.3.1_0 exists in the ports tree
> :debug:main xorg-randrproto 1.3.1_0  is the latest installed
> :debug:main xorg-randrproto 1.3.1_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-randrproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> randrproto.
> :debug:main No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-
> randrproto 1.3.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXxf86vm 1.1.0_0 exists in the ports tree
> :debug:main xorg-libXxf86vm 1.1.0_0 +universal is the latest installed
> :debug:main xorg-libXxf86vm 1.1.0_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXxf86vm
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXxf86vm 1.1.0_0 >= xorg-
> libXxf86vm 1.1.0_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-xf86vidmodeproto 2.3_0 exists in the ports tree
> :debug:main xorg-xf86vidmodeproto 2.3_0  is the latest installed
> :debug:main xorg-xf86vidmodeproto 2.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xf86vidmodeproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> xf86vidmodeproto.
> :debug:main No need to upgrade! xorg-xf86vidmodeproto 2.3_0 >= xorg-
> xf86vidmodeproto 2.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main mesa 7.8.2_2 exists in the ports tree
> :debug:main mesa 7.8.2_2 +universal is the latest installed
> :debug:main mesa 7.8.2_2 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! mesa 7.8.2_2 >= mesa 7.8.2_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-glproto 1.4.12_0 exists in the ports tree
> :debug:main xorg-glproto 1.4.12_0  is the latest installed
> :debug:main xorg-glproto 1.4.12_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-glproto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> glproto.
> :debug:main No need to upgrade! xorg-glproto 1.4.12_0 >= xorg-glproto
> 1.4.12_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-dri2proto 2.3_0 exists in the ports tree
> :debug:main xorg-dri2proto 2.3_0  is the latest installed
> :debug:main xorg-dri2proto 2.3_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-dri2proto
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main Requested variant universal is not provided by port xorg-
> dri2proto.
> :debug:main No need to upgrade! xorg-dri2proto 2.3_0 >= xorg-dri2proto
> 2.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXmu 1.0.5_0 exists in the ports tree
> :debug:main xorg-libXmu 1.0.5_0 +universal is the latest installed
> :debug:main xorg-libXmu 1.0.5_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXmu
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu
> 1.0.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xorg-libXt 1.0.8_0 exists in the ports tree
> :debug:main xorg-libXt 1.0.8_0 +universal is the latest installed
> :debug:main xorg-libXt 1.0.8_0 +universal is active
> :debug:main Merging existing variants '+universal' into variants
> :debug:main new fully merged portvariants: universal +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXt
> :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Executing variant universal provides universal
> :debug:main No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0
> :msg:main --->  Computing dependencies for wine-devel:info:main
> .:debug:main Searching for dependency: flex
> :debug:main Found Dependency: receipt exists for flex
> :debug:main Searching for dependency: pkgconfig
> :debug:main Found Dependency: receipt exists for pkgconfig
> :debug:main Searching for dependency: expat
> :debug:main Found Dependency: receipt exists for expat
> :debug:main Searching for dependency: fontconfig
> :debug:main Found Dependency: receipt exists for fontconfig
> :debug:main Searching for dependency: freetype
> :debug:main Found Dependency: receipt exists for freetype
> :debug:main Searching for dependency: gnutls
> :debug:main Found Dependency: receipt exists for gnutls
> :debug:main Searching for dependency: jpeg
> :debug:main Found Dependency: receipt exists for jpeg
> :debug:main Searching for dependency: lcms
> :debug:main Found Dependency: receipt exists for lcms
> :debug:main Searching for dependency: libiconv
> :debug:main Found Dependency: receipt exists for libiconv
> :debug:main Searching for dependency: libpng
> :debug:main Found Dependency: receipt exists for libpng
> :debug:main Searching for dependency: libxml2
> :debug:main Found Dependency: receipt exists for libxml2
> :debug:main Searching for dependency: libxslt
> :debug:main Found Dependency: receipt exists for libxslt
> :debug:main Searching for dependency: ncurses
> :debug:main Found Dependency: receipt exists for ncurses
> :debug:main Searching for dependency: openssl
> :debug:main Found Dependency: receipt exists for openssl
> :debug:main Searching for dependency: tiff
> :debug:main Found Dependency: receipt exists for tiff
> :debug:main Searching for dependency: zlib
> :debug:main Found Dependency: receipt exists for zlib
> :debug:main Searching for dependency: xorg-libsm
> :debug:main Found Dependency: receipt exists for xorg-libsm
> :debug:main Searching for dependency: xorg-libXcomposite
> :debug:main Found Dependency: receipt exists for xorg-libXcomposite
> :debug:main Searching for dependency: xorg-libXcursor
> :debug:main Found Dependency: receipt exists for xorg-libXcursor
> :debug:main Searching for dependency: xorg-libXi
> :debug:main Found Dependency: receipt exists for xorg-libXi
> :debug:main Searching for dependency: xorg-libXinerama
> :debug:main Found Dependency: receipt exists for xorg-libXinerama
> :debug:main Searching for dependency: xorg-libXrandr
> :debug:main Found Dependency: receipt exists for xorg-libXrandr
> :debug:main Searching for dependency: xorg-libXxf86vm
> :debug:main Found Dependency: receipt exists for xorg-libXxf86vm
> :debug:main Searching for dependency: xrender
> :debug:main Found Dependency: receipt exists for xrender
> :debug:main Searching for dependency: mesa
> :debug:main Found Dependency: receipt exists for mesa
> :msg:main
> :debug:main Executing org.macports.main (wine-devel)
> :debug:main Skipping completed org.macports.fetch (wine-devel)
> :debug:main Skipping completed org.macports.checksum (wine-devel)
> :debug:main setting option extract.cmd to /usr/bin/bzip2
> :debug:main Skipping completed org.macports.extract (wine-devel)
> :debug:main Skipping completed org.macports.patch (wine-devel)
> :msg:main --->  Configuring wine-devel
> :debug:main Using compiler 'Mac OS X gcc 4.2'
> :debug:configure configure phase started at Sun Aug 29 02:46:48 EDT 2010
> :debug:configure Executing proc-pre-org.macports.configure-configure-0
> :debug:configure Executing org.macports.configure (wine-devel)
> :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe
> -O2 -arch i386' CPPFLAGS='-I/opt/local/include -D_DARWIN_NO_64_BIT_INODE'
> CXXFLAGS='-pipe -O2 -arch i386' LIBRARY_PATH='/opt/local/lib'
> MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_wine-devel/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe
> -O2 -m32' LDFLAGS='-L/opt/local/lib -framework CoreServices -lz -arch
> i386' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m32'
> INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch i386'
> FFLAGS='-pipe -O2 -m32' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
> :debug:configure Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_wine-devel/work/wine-1.3.1" && ./configure
> --prefix=/opt/local --without-alsa --without-audioio --without-capi
> --with-cms --with-coreaudio --without-cups --with-curses --without-esd
> --with-fontconfig --with-freetype --without-gphoto --with-glu --with-
> gnutls --without-gsm --without-hal --without-jack --with-jpeg --without-
> ldap --without-mpg123 --without-nas --without-openal --with-opengl
> --with-openssl --without-oss --with-png --with-pthread --without-sane
> --with-tiff --without-v4l --with-xcomposite --with-xcursor --with-
> xinerama --with-xinput --with-xml --with-xrandr --with-xrender --with-
> xshape --with-xshm --with-xslt --with-xxf86vm --with-x
> --x-include=/opt/local/include --x-lib=/opt/local/lib'
> :info:configure checking build system type... x86_64-apple-darwin10.4.0
> :info:configure checking host system type... x86_64-apple-darwin10.4.0
> :info:configure checking whether make sets $(MAKE)... yes
> :info:configure checking for gcc... /usr/bin/gcc-4.2
> :info:configure checking whether the C compiler works... yes
> :info:configure checking for C compiler default output file name... a.out
> :info:configure checking for suffix of executables...
> :info:configure checking whether we are cross compiling... no
> :info:configure checking for suffix of object files... o
> :info:configure checking whether we are using the GNU C compiler... yes
> :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
> :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89...
> none needed
> :info:configure checking whether we are using the GNU C++ compiler... yes
> :info:configure checking whether /usr/bin/g++-4.2 accepts -g... yes
> :info:configure checking for cpp... cpp
> :info:configure checking for the directory containing the Wine tools...
> $(TOPOBJDIR)
> :info:configure checking for flex... flex
> :info:configure checking whether flex is recent enough... yes
> :info:configure checking for bison... bison
> :info:configure checking for ar... ar
> :info:configure checking for ranlib... ranlib
> :info:configure checking for strip... strip
> :info:configure checking whether ln -s works... yes
> :info:configure checking for grep that handles long lines and -e...
> /usr/bin/grep
> :info:configure checking for egrep... /usr/bin/grep -E
> :info:configure checking for ldconfig... true
> :info:configure checking for a BSD-compatible install... /usr/bin/install
> -c
> :info:configure checking for lclint... no
> :info:configure checking for lint... no
> :info:configure checking for fontforge... no
> :info:configure checking for pkg-config... pkg-config
> :info:configure checking for rsvg... no
> :info:configure checking for convert... no
> :info:configure checking for icotool... no
> :info:configure checking for prelink... false
> :info:configure checking for i386_set_ldt in -li386... no
> :info:configure checking for _oss_ioctl in -lossaudio... no
> :info:configure checking for special C compiler options needed for large
> files... no
> :info:configure checking for _FILE_OFFSET_BITS value needed for large
> files... no
> :info:configure checking how to run the C preprocessor...
> /usr/bin/gcc-4.2 -m32 -E
> :info:configure checking for ANSI C header files... yes
> :info:configure checking for sys/types.h... yes
> :info:configure checking for sys/stat.h... yes
> :info:configure checking for stdlib.h... yes
> :info:configure checking for string.h... yes
> :info:configure checking for memory.h... yes
> :info:configure checking for strings.h... yes
> :info:configure checking for inttypes.h... yes
> :info:configure checking for stdint.h... yes
> :info:configure checking for unistd.h... yes
> :info:configure checking for AL/al.h... (cached) no
> :info:configure checking AudioToolbox/AudioConverter.h usability... yes
> :info:configure checking AudioToolbox/AudioConverter.h presence... yes
> :info:configure checking for AudioToolbox/AudioConverter.h... yes
> :info:configure checking AudioUnit/AudioUnit.h usability... yes
> :info:configure checking AudioUnit/AudioUnit.h presence... yes
> :info:configure checking for AudioUnit/AudioUnit.h... yes
> :info:configure checking Carbon/Carbon.h usability... yes
> :info:configure checking Carbon/Carbon.h presence... yes
> :info:configure checking for Carbon/Carbon.h... yes
> :info:configure checking CoreAudio/CoreAudio.h usability... yes
> :info:configure checking CoreAudio/CoreAudio.h presence... yes
> :info:configure checking for CoreAudio/CoreAudio.h... yes
> :info:configure checking DiskArbitration/DiskArbitration.h usability...
> yes
> :info:configure checking DiskArbitration/DiskArbitration.h presence...
> yes
> :info:configure checking for DiskArbitration/DiskArbitration.h... yes
> :info:configure checking IOKit/IOKitLib.h usability... yes
> :info:configure checking IOKit/IOKitLib.h presence... yes
> :info:configure checking for IOKit/IOKitLib.h... yes
> :info:configure checking IOKit/hid/IOHIDLib.h usability... yes
> :info:configure checking IOKit/hid/IOHIDLib.h presence... yes
> :info:configure checking for IOKit/hid/IOHIDLib.h... yes
> :info:configure checking for OpenAL/al.h... (cached) no
> :info:configure checking alias.h usability... no
> :info:configure checking alias.h presence... no
> :info:configure checking for alias.h... no
> :info:configure checking for alsa/asoundlib.h... (cached) no
> :info:configure checking arpa/inet.h usability... yes
> :info:configure checking arpa/inet.h presence... yes
> :info:configure checking for arpa/inet.h... yes
> :info:configure checking arpa/nameser.h usability... yes
> :info:configure checking arpa/nameser.h presence... yes
> :info:configure checking for arpa/nameser.h... yes
> :info:configure checking asm/types.h usability... no
> :info:configure checking asm/types.h presence... no
> :info:configure checking for asm/types.h... no
> :info:configure checking for capi20.h... (cached) no
> :info:configure checking curses.h usability... yes
> :info:configure checking curses.h presence... yes
> :info:configure checking for curses.h... yes
> :info:configure checking direct.h usability... no
> :info:configure checking direct.h presence... no
> :info:configure checking for direct.h... no
> :info:configure checking dirent.h usability... yes
> :info:configure checking dirent.h presence... yes
> :info:configure checking for dirent.h... yes
> :info:configure checking dlfcn.h usability... yes
> :info:configure checking dlfcn.h presence... yes
> :info:configure checking for dlfcn.h... yes
> :info:configure checking elf.h usability... no
> :info:configure checking elf.h presence... no
> :info:configure checking for elf.h... no
> :info:configure checking float.h usability... yes
> :info:configure checking float.h presence... yes
> :info:configure checking for float.h... yes
> :info:configure checking fnmatch.h usability... yes
> :info:configure checking fnmatch.h presence... yes
> :info:configure checking for fnmatch.h... yes
> :info:configure checking fontconfig/fontconfig.h usability... yes
> :info:configure checking fontconfig/fontconfig.h presence... yes
> :info:configure checking for fontconfig/fontconfig.h... yes
> :info:configure checking getopt.h usability... yes
> :info:configure checking getopt.h presence... yes
> :info:configure checking for getopt.h... yes
> :info:configure checking grp.h usability... yes
> :info:configure checking grp.h presence... yes
> :info:configure checking for grp.h... yes
> :info:configure checking for gsm.h... (cached) no
> :info:configure checking for gsm/gsm.h... (cached) no
> :info:configure checking ieeefp.h usability... no
> :info:configure checking ieeefp.h presence... no
> :info:configure checking for ieeefp.h... no
> :info:configure checking inet/mib2.h usability... no
> :info:configure checking inet/mib2.h presence... no
> :info:configure checking for inet/mib2.h... no
> :info:configure checking io.h usability... no
> :info:configure checking io.h presence... no
> :info:configure checking for io.h... no
> :info:configure checking for jack/jack.h... (cached) no
> :info:configure checking jpeglib.h usability... yes
> :info:configure checking jpeglib.h presence... yes
> :info:configure checking for jpeglib.h... yes
> :info:configure checking kstat.h usability... no
> :info:configure checking kstat.h presence... no
> :info:configure checking for kstat.h... no
> :info:configure checking for lber.h... (cached) no
> :info:configure checking lcms.h usability... yes
> :info:configure checking lcms.h presence... yes
> :info:configure checking for lcms.h... yes
> :info:configure checking lcms/lcms.h usability... no
> :info:configure checking lcms/lcms.h presence... no
> :info:configure checking for lcms/lcms.h... no
> :info:configure checking for ldap.h... (cached) no
> :info:configure checking for libaudioio.h... (cached) no
> :info:configure checking link.h usability... no
> :info:configure checking link.h presence... no
> :info:configure checking for link.h... no
> :info:configure checking linux/cdrom.h usability... no
> :info:configure checking linux/cdrom.h presence... no
> :info:configure checking for linux/cdrom.h... no
> :info:configure checking linux/compiler.h usability... no
> :info:configure checking linux/compiler.h presence... no
> :info:configure checking for linux/compiler.h... no
> :info:configure checking linux/hdreg.h usability... no
> :info:configure checking linux/hdreg.h presence... no
> :info:configure checking for linux/hdreg.h... no
> :info:configure checking linux/input.h usability... no
> :info:configure checking linux/input.h presence... no
> :info:configure checking for linux/input.h... no
> :info:configure checking linux/ioctl.h usability... no
> :info:configure checking linux/ioctl.h presence... no
> :info:configure checking for linux/ioctl.h... no
> :info:configure checking linux/joystick.h usability... no
> :info:configure checking linux/joystick.h presence... no
> :info:configure checking for linux/joystick.h... no
> :info:configure checking linux/major.h usability... no
> :info:configure checking linux/major.h presence... no
> :info:configure checking for linux/major.h... no
> :info:configure checking linux/param.h usability... no
> :info:configure checking linux/param.h presence... no
> :info:configure checking for linux/param.h... no
> :info:configure checking linux/serial.h usability... no
> :info:configure checking linux/serial.h presence... no
> :info:configure checking for linux/serial.h... no
> :info:configure checking linux/types.h usability... no
> :info:configure checking linux/types.h presence... no
> :info:configure checking for linux/types.h... no
> :info:configure checking linux/ucdrom.h usability... no
> :info:configure checking linux/ucdrom.h presence... no
> :info:configure checking for linux/ucdrom.h... no
> :info:configure checking mach-o/nlist.h usability... yes
> :info:configure checking mach-o/nlist.h presence... yes
> :info:configure checking for mach-o/nlist.h... yes
> :info:configure checking mach/mach.h usability... yes
> :info:configure checking mach/mach.h presence... yes
> :info:configure checking for mach/mach.h... yes
> :info:configure checking mach/machine.h usability... yes
> :info:configure checking mach/machine.h presence... yes
> :info:configure checking for mach/machine.h... yes
> :info:configure checking machine/cpu.h usability... no
> :info:configure checking machine/cpu.h presence... no
> :info:configure checking for machine/cpu.h... no
> :info:configure checking machine/limits.h usability... yes
> :info:configure checking machine/limits.h presence... yes
> :info:configure checking for machine/limits.h... yes
> :info:configure checking for machine/soundcard.h... (cached) no
> :info:configure checking machine/sysarch.h usability... no
> :info:configure checking machine/sysarch.h presence... no
> :info:configure checking for machine/sysarch.h... no
> :info:configure checking mntent.h usability... no
> :info:configure checking mntent.h presence... no
> :info:configure checking for mntent.h... no
> :info:configure checking for mpg123.h... (cached) no
> :info:configure checking ncurses.h usability... yes
> :info:configure checking ncurses.h presence... yes
> :info:configure checking for ncurses.h... yes
> :info:configure checking netdb.h usability... yes
> :info:configure checking netdb.h presence... yes
> :info:configure checking for netdb.h... yes
> :info:configure checking netinet/in.h usability... yes
> :info:configure checking netinet/in.h presence... yes
> :info:configure checking for netinet/in.h... yes
> :info:configure checking netinet/in_systm.h usability... yes
> :info:configure checking netinet/in_systm.h presence... yes
> :info:configure checking for netinet/in_systm.h... yes
> :info:configure checking netinet/tcp.h usability... yes
> :info:configure checking netinet/tcp.h presence... yes
> :info:configure checking for netinet/tcp.h... yes
> :info:configure checking netinet/tcp_fsm.h usability... yes
> :info:configure checking netinet/tcp_fsm.h presence... yes
> :info:configure checking for netinet/tcp_fsm.h... yes
> :info:configure checking openssl/err.h usability... no
> :info:configure checking openssl/err.h presence... no
> :info:configure checking for openssl/err.h... no
> :info:configure checking openssl/ssl.h usability... no
> :info:configure checking openssl/ssl.h presence... no
> :info:configure checking for openssl/ssl.h... no
> :info:configure checking png.h usability... yes
> :info:configure checking png.h presence... yes
> :info:configure checking for png.h... yes
> :info:configure checking poll.h usability... yes
> :info:configure checking poll.h presence... yes
> :info:configure checking for poll.h... yes
> :info:configure checking port.h usability... no
> :info:configure checking port.h presence... no
> :info:configure checking for port.h... no
> :info:configure checking process.h usability... no
> :info:configure checking process.h presence... no
> :info:configure checking for process.h... no
> :info:configure checking pthread.h usability... yes
> :info:configure checking pthread.h presence... yes
> :info:configure checking for pthread.h... yes
> :info:configure checking pwd.h usability... yes
> :info:configure checking pwd.h presence... yes
> :info:configure checking for pwd.h... yes
> :info:configure checking regex.h usability... yes
> :info:configure checking regex.h presence... yes
> :info:configure checking for regex.h... yes
> :info:configure checking sched.h usability... yes
> :info:configure checking sched.h presence... yes
> :info:configure checking for sched.h... yes
> :info:configure checking scsi/scsi.h usability... no
> :info:configure checking scsi/scsi.h presence... no
> :info:configure checking for scsi/scsi.h... no
> :info:configure checking scsi/scsi_ioctl.h usability... no
> :info:configure checking scsi/scsi_ioctl.h presence... no
> :info:configure checking for scsi/scsi_ioctl.h... no
> :info:configure checking scsi/sg.h usability... no
> :info:configure checking scsi/sg.h presence... no
> :info:configure checking for scsi/sg.h... no
> :info:configure checking for soundcard.h... (cached) no
> :info:configure checking stdbool.h usability... yes
> :info:configure checking stdbool.h presence... yes
> :info:configure checking for stdbool.h... yes
> :info:configure checking for stdint.h... (cached) yes
> :info:configure checking for strings.h... (cached) yes
> :info:configure checking stropts.h usability... no
> :info:configure checking stropts.h presence... no
> :info:configure checking for stropts.h... no
> :info:configure checking for sys/asoundlib.h... (cached) no
> :info:configure checking sys/cdio.h usability... no
> :info:configure checking sys/cdio.h presence... no
> :info:configure checking for sys/cdio.h... no
> :info:configure checking sys/elf32.h usability... no
> :info:configure checking sys/elf32.h presence... no
> :info:configure checking for sys/elf32.h... no
> :info:configure checking sys/epoll.h usability... no
> :info:configure checking sys/epoll.h presence... no
> :info:configure checking for sys/epoll.h... no
> :info:configure checking sys/errno.h usability... yes
> :info:configure checking sys/errno.h presence... yes
> :info:configure checking for sys/errno.h... yes
> :info:configure checking sys/event.h usability... yes
> :info:configure checking sys/event.h presence... yes
> :info:configure checking for sys/event.h... yes
> :info:configure checking sys/exec_elf.h usability... no
> :info:configure checking sys/exec_elf.h presence... no
> :info:configure checking for sys/exec_elf.h... no
> :info:configure checking sys/filio.h usability... yes
> :info:configure checking sys/filio.h presence... yes
> :info:configure checking for sys/filio.h... yes
> :info:configure checking sys/inotify.h usability... no
> :info:configure checking sys/inotify.h presence... no
> :info:configure checking for sys/inotify.h... no
> :info:configure checking sys/ioctl.h usability... yes
> :info:configure checking sys/ioctl.h presence... yes
> :info:configure checking for sys/ioctl.h... yes
> :info:configure checking sys/ipc.h usability... yes
> :info:configure checking sys/ipc.h presence... yes
> :info:configure checking for sys/ipc.h... yes
> :info:configure checking sys/limits.h usability... no
> :info:configure checking sys/limits.h presence... no
> :info:configure checking for sys/limits.h... no
> :info:configure checking sys/link.h usability... no
> :info:configure checking sys/link.h presence... no
> :info:configure checking for sys/link.h... no
> :info:configure checking sys/mman.h usability... yes
> :info:configure checking sys/mman.h presence... yes
> :info:configure checking for sys/mman.h... yes
> :info:configure checking sys/modem.h usability... no
> :info:configure checking sys/modem.h presence... no
> :info:configure checking for sys/modem.h... no
> :info:configure checking sys/msg.h usability... yes
> :info:configure checking sys/msg.h presence... yes
> :info:configure checking for sys/msg.h... yes
> :info:configure checking sys/mtio.h usability... no
> :info:configure checking sys/mtio.h presence... no
> :info:configure checking for sys/mtio.h... no
> :info:configure checking sys/param.h usability... yes
> :info:configure checking sys/param.h presence... yes
> :info:configure checking for sys/param.h... yes
> :info:configure checking sys/poll.h usability... yes
> :info:configure checking sys/poll.h presence... yes
> :info:configure checking for sys/poll.h... yes
> :info:configure checking sys/prctl.h usability... no
> :info:configure checking sys/prctl.h presence... no
> :info:configure checking for sys/prctl.h... no
> :info:configure checking sys/protosw.h usability... yes
> :info:configure checking sys/protosw.h presence... yes
> :info:configure checking for sys/protosw.h... yes
> :info:configure checking sys/ptrace.h usability... yes
> :info:configure checking sys/ptrace.h presence... yes
> :info:configure checking for sys/ptrace.h... yes
> :info:configure checking sys/resource.h usability... yes
> :info:configure checking sys/resource.h presence... yes
> :info:configure checking for sys/resource.h... yes
> :info:configure checking sys/scsiio.h usability... no
> :info:configure checking sys/scsiio.h presence... no
> :info:configure checking for sys/scsiio.h... no
> :info:configure checking sys/shm.h usability... yes
> :info:configure checking sys/shm.h presence... yes
> :info:configure checking for sys/shm.h... yes
> :info:configure checking sys/signal.h usability... yes
> :info:configure checking sys/signal.h presence... yes
> :info:configure checking for sys/signal.h... yes
> :info:configure checking sys/socket.h usability... yes
> :info:configure checking sys/socket.h presence... yes
> :info:configure checking for sys/socket.h... yes
> :info:configure checking sys/socketvar.h usability... yes
> :info:configure checking sys/socketvar.h presence... yes
> :info:configure checking for sys/socketvar.h... yes
> :info:configure checking sys/sockio.h usability... yes
> :info:configure checking sys/sockio.h presence... yes
> :info:configure checking for sys/sockio.h... yes
> :info:configure checking for sys/soundcard.h... (cached) no
> :info:configure checking sys/statvfs.h usability... yes
> :info:configure checking sys/statvfs.h presence... yes
> :info:configure checking for sys/statvfs.h... yes
> :info:configure checking sys/strtio.h usability... no
> :info:configure checking sys/strtio.h presence... no
> :info:configure checking for sys/strtio.h... no
> :info:configure checking sys/syscall.h usability... yes
> :info:configure checking sys/syscall.h presence... yes
> :info:configure checking for sys/syscall.h... yes
> :info:configure checking sys/tihdr.h usability... no
> :info:configure checking sys/tihdr.h presence... no
> :info:configure checking for sys/tihdr.h... no
> :info:configure checking sys/time.h usability... yes
> :info:configure checking sys/time.h presence... yes
> :info:configure checking for sys/time.h... yes
> :info:configure checking sys/timeout.h usability... no
> :info:configure checking sys/timeout.h presence... no
> :info:configure checking for sys/timeout.h... no
> :info:configure checking sys/times.h usability... yes
> :info:configure checking sys/times.h presence... yes
> :info:configure checking for sys/times.h... yes
> :info:configure checking sys/uio.h usability... yes
> :info:configure checking sys/uio.h presence... yes
> :info:configure checking for sys/uio.h... yes
> :info:configure checking sys/un.h usability... yes
> :info:configure checking sys/un.h presence... yes
> :info:configure checking for sys/un.h... yes
> :info:configure checking sys/utsname.h usability... yes
> :info:configure checking sys/utsname.h presence... yes
> :info:configure checking for sys/utsname.h... yes
> :info:configure checking sys/vm86.h usability... no
> :info:configure checking sys/vm86.h presence... no
> :info:configure checking for sys/vm86.h... no
> :info:configure checking sys/wait.h usability... yes
> :info:configure checking sys/wait.h presence... yes
> :info:configure checking for sys/wait.h... yes
> :info:configure checking syscall.h usability... no
> :info:configure checking syscall.h presence... no
> :info:configure checking for syscall.h... no
> :info:configure checking termios.h usability... yes
> :info:configure checking termios.h presence... yes
> :info:configure checking for termios.h... yes
> :info:configure checking tiffio.h usability... yes
> :info:configure checking tiffio.h presence... yes
> :info:configure checking for tiffio.h... yes
> :info:configure checking for unistd.h... (cached) yes
> :info:configure checking utime.h usability... yes
> :info:configure checking utime.h presence... yes
> :info:configure checking for utime.h... yes
> :info:configure checking valgrind/memcheck.h usability... no
> :info:configure checking valgrind/memcheck.h presence... no
> :info:configure checking for valgrind/memcheck.h... no
> :info:configure checking valgrind/valgrind.h usability... no
> :info:configure checking valgrind/valgrind.h presence... no
> :info:configure checking for valgrind/valgrind.h... no
> :info:configure checking zlib.h usability... yes
> :info:configure checking zlib.h presence... yes
> :info:configure checking for zlib.h... yes
> :info:configure checking whether stat file-mode macros are broken... no
> :info:configure checking for sys/mount.h... yes
> :info:configure checking for sys/statfs.h... no
> :info:configure checking for sys/sysctl.h... yes
> :info:configure checking for sys/user.h... yes
> :info:configure checking for sys/vfs.h... no
> :info:configure checking for netinet/ip.h... yes
> :info:configure checking for net/if.h... yes
> :info:configure checking for net/if_arp.h... yes
> :info:configure checking for net/if_dl.h... yes
> :info:configure checking for net/if_types.h... yes
> :info:configure checking for net/route.h... yes
> :info:configure checking for netinet/if_ether.h... yes
> :info:configure checking for netinet/if_inarp.h... no
> :info:configure checking for netinet/in_pcb.h... yes
> :info:configure checking for netinet/ip_icmp.h... yes
> :info:configure checking for netinet/ip_var.h... yes
> :info:configure checking for netinet/udp.h... yes
> :info:configure checking for netipx/ipx.h... no
> :info:configure checking for netinet/tcp_timer.h... yes
> :info:configure checking for netinet/udp_var.h... yes
> :info:configure checking for netinet/icmp_var.h... yes
> :info:configure checking for netinet/tcp_var.h... yes
> :info:configure checking for linux/ipx.h... no
> :info:configure checking for linux/irda.h... no
> :info:configure checking for mach-o/dyld_images.h... yes
> :info:configure checking for resolv.h... yes
> :info:configure checking for ifaddrs.h... yes
> :info:configure checking for ucontext.h... no
> :info:configure checking for sys/thr.h... no
> :info:configure checking for pthread_np.h... no
> :info:configure checking for linux/videodev.h... no
> :info:configure checking for linux/capi.h... (cached) no
> :info:configure checking for ldd... true
> :info:configure checking for IOHIDManagerCreate... yes
> :info:configure checking whether 16-bit code can be built correctly...
> yes
> :info:configure checking for i686-pc-mingw32-gcc... no
> :info:configure checking for i586-pc-mingw32-gcc... no
> :info:configure checking for i486-pc-mingw32-gcc... no
> :info:configure checking for i386-pc-mingw32-gcc... no
> :info:configure checking for i686-mingw32msvc-gcc... no
> :info:configure checking for i586-mingw32msvc-gcc... no
> :info:configure checking for i486-mingw32msvc-gcc... no
> :info:configure checking for i386-mingw32msvc-gcc... no
> :info:configure checking for i686-mingw32-gcc... no
> :info:configure checking for i586-mingw32-gcc... no
> :info:configure checking for i486-mingw32-gcc... no
> :info:configure checking for i386-mingw32-gcc... no
> :info:configure checking for pthread_create in -lpthread... yes
> :info:configure checking for X... libraries /opt/local/lib, headers
> /opt/local/include
> :info:configure checking whether -R must be followed by a space... no
> :info:configure checking for gethostbyname... yes
> :info:configure checking for connect... yes
> :info:configure checking for remove... yes
> :info:configure checking for shmat... yes
> :info:configure checking for IceConnectionNumber in -lICE... yes
> :info:configure checking for -lX11... libX11.6.dylib
> :info:configure checking for -lXext... libXext.6.dylib
> :info:configure checking for X11/Xlib.h... yes
> :info:configure checking for X11/XKBlib.h... yes
> :info:configure checking for X11/Xutil.h... yes
> :info:configure checking for X11/Xcursor/Xcursor.h... yes
> :info:configure checking for X11/extensions/shape.h... yes
> :info:configure checking for X11/extensions/XInput.h... yes
> :info:configure checking for X11/extensions/XShm.h... yes
> :info:configure checking for X11/extensions/Xcomposite.h... yes
> :info:configure checking for X11/extensions/Xinerama.h... yes
> :info:configure checking for X11/extensions/Xrandr.h... yes
> :info:configure checking for X11/extensions/Xrender.h... yes
> :info:configure checking for X11/extensions/xf86vmode.h... yes
> :info:configure checking for X11/extensions/xf86vmproto.h... yes
> :info:configure checking for XkbQueryExtension in -lX11... yes
> :info:configure checking for -lXcursor... libXcursor.1.dylib
> :info:configure checking for -lXi... libXi.6.dylib
> :info:configure checking for XShmQueryExtension in -lXext... yes
> :info:configure checking for XShapeQueryExtension in -lXext... yes
> :info:configure checking for -lXxf86vm... libXxf86vm.1.dylib
> :info:configure checking for -lXrender... libXrender.1.dylib
> :info:configure checking for XRenderSetPictureTransform in -lXrender...
> yes
> :info:configure checking for -lXrandr... libXrandr.2.dylib
> :info:configure checking for -lXinerama... libXinerama.1.dylib
> :info:configure checking for -lXcomposite... libXcomposite.1.dylib
> :info:configure checking for XICCallback.callback... yes
> :info:configure checking for GL/gl.h... yes
> :info:configure checking for GL/glx.h... yes
> :info:configure checking for GL/glu.h... yes
> :info:configure checking for up-to-date OpenGL version... yes
> :info:configure checking for -lGL... libGL.1.dylib
> :info:configure checking for -lGLU... libGLU.1.dylib
> :info:configure checking for audio/audiolib.h... (cached) no
> :info:configure checking libxml/parser.h usability... yes
> :info:configure checking libxml/parser.h presence... yes
> :info:configure checking for libxml/parser.h... yes
> :info:configure checking for xmlParseMemory in -lxml2... yes
> :info:configure checking for xmlReadMemory in -lxml2... yes
> :info:configure checking for xmlNewDocPI in -lxml2... yes
> :info:configure checking for libxslt/pattern.h... yes
> :info:configure checking for libxslt/transform.h... yes
> :info:configure checking for -lxslt... libxslt.1.dylib
> :info:configure checking gnutls/gnutls.h usability... yes
> :info:configure checking gnutls/gnutls.h presence... yes
> :info:configure checking for gnutls/gnutls.h... yes
> :info:configure checking for -lgnutls... libgnutls.26.dylib
> :info:configure checking for -lncurses... libncurses.5.dylib
> :info:configure checking for mousemask... yes
> :info:configure checking for cmsOpenProfileFromFile in -llcms... yes
> :info:configure checking for freetype-config... freetype-config
> :info:configure checking for -lfreetype... libfreetype.6.dylib
> :info:configure checking for ft2build.h... yes
> :info:configure checking for freetype/freetype.h... yes
> :info:configure checking for freetype/ftglyph.h... yes
> :info:configure checking for freetype/fttypes.h... yes
> :info:configure checking for freetype/tttables.h... yes
> :info:configure checking for freetype/ftsnames.h... yes
> :info:configure checking for freetype/ttnameid.h... yes
> :info:configure checking for freetype/ftoutln.h... yes
> :info:configure checking for freetype/ftwinfnt.h... yes
> :info:configure checking for freetype/ftmodapi.h... yes
> :info:configure checking for freetype/ftlcdfil.h... yes
> :info:configure checking for freetype/internal/sfnt.h... no
> :info:configure checking for FT_TrueTypeEngineType... yes
> :info:configure checking for FT_Load_Sfnt_Table... yes
> :info:configure checking for parport header/ppdev.h... no
> :info:configure checking for pthread_attr_get_np... no
> :info:configure checking for pthread_getattr_np... no
> :info:configure checking for pthread_get_stackaddr_np... yes
> :info:configure checking for pthread_get_stacksize_np... yes
> :info:configure checking for inflate in -lz... yes
> :info:configure checking for -lfontconfig... libfontconfig.1.dylib
> :info:configure configure: error: OpenSSL 32-bit development files not
> found, SSL won't be supported.
> :info:configure This is an error since --with-openssl was requested.
> :info:configure shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_wine-devel/work/wine-1.3.1" && ./configure
> --prefix=/opt/local --without-alsa --without-audioio --without-capi
> --with-cms --with-coreaudio --without-cups --with-curses --without-esd
> --with-fontconfig --with-freetype --without-gphoto --with-glu --with-
> gnutls --without-gsm --without-hal --without-jack --with-jpeg --without-
> ldap --without-mpg123 --without-nas --without-openal --with-opengl
> --with-openssl --without-oss --with-png --with-pthread --without-sane
> --with-tiff --without-v4l --with-xcomposite --with-xcursor --with-
> xinerama --with-xinput --with-xml --with-xrandr --with-xrender --with-
> xshape --with-xshm --with-xslt --with-xxf86vm --with-x
> --x-include=/opt/local/include --x-lib=/opt/local/lib " returned error 1
> :error:configure Target org.macports.configure returned: configure
> failure: shell command failed
> :debug:configure Backtrace: configure failure: shell command failed
>     while executing
> "$procedure $targetname"
> :info:configure Warning: the following items did not execute (for wine-
> devel): org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> :notice:configure Log for wine-devel is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_wine-devel/main.log

New description:

 here is my log any thoughts?

 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main flex 2.5.35_0 exists in the ports tree
 :debug:main flex 2.5.35_0 +universal is the latest installed
 :debug:main flex 2.5.35_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main pkgconfig 0.25_1 exists in the ports tree
 :debug:main pkgconfig 0.25_1 +universal is the latest installed
 :debug:main pkgconfig 0.25_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! pkgconfig 0.25_1 >= pkgconfig 0.25_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_0 exists in the ports tree
 :debug:main expat 2.0.1_0 +universal is the latest installed
 :debug:main expat 2.0.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fontconfig 2.8.0_0 exists in the ports tree
 :debug:main fontconfig 2.8.0_0 +universal is the latest installed
 :debug:main fontconfig 2.8.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.13.1_0 exists in the ports tree
 :debug:main libiconv 1.13.1_0 +universal is the latest installed
 :debug:main libiconv 1.13.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main freetype 2.4.2_0 exists in the ports tree
 :debug:main freetype 2.4.2_0 +universal is the latest installed
 :debug:main freetype 2.4.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! freetype 2.4.2_0 >= freetype 2.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.5_0 exists in the ports tree
 :debug:main zlib 1.2.5_0 +universal is the latest installed
 :debug:main zlib 1.2.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnutls 2.8.6_0 exists in the ports tree
 :debug:main gnutls 2.8.6_0 +universal is the latest installed
 :debug:main gnutls 2.8.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gnutls
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gnutls 2.8.6_0 >= gnutls 2.8.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libtasn1 2.2_0 exists in the ports tree
 :debug:main libtasn1 2.2_0 +universal is the latest installed
 :debug:main libtasn1 2.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libtasn1 2.2_0 >= libtasn1 2.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main opencdk 0.6.6_0 exists in the ports tree
 :debug:main opencdk 0.6.6_0 +universal is the latest installed
 :debug:main opencdk 0.6.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opencdk
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! opencdk 0.6.6_0 >= opencdk 0.6.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgcrypt 1.4.6_0 exists in the ports tree
 :debug:main libgcrypt 1.4.6_0 +universal is the latest installed
 :debug:main libgcrypt 1.4.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libgcrypt 1.4.6_0 >= libgcrypt 1.4.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgpg-error 1.9_0 exists in the ports tree
 :debug:main libgpg-error 1.9_0 +universal is the latest installed
 :debug:main libgpg-error 1.9_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libgpg-error
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libgpg-error 1.9_0 >= libgpg-error 1.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2 +universal is the latest installed
 :debug:main gettext 0.18.1.1_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.7_0 exists in the ports tree
 :debug:main ncurses 5.7_0 +universal is the latest installed
 :debug:main ncurses 5.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncursesw 5.7_0 exists in the ports tree
 :debug:main ncursesw 5.7_0 +universal is the latest installed
 :debug:main ncursesw 5.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main lzo 1.08_0 exists in the ports tree
 :debug:main lzo 1.08_0 +universal is the latest installed
 :debug:main lzo 1.08_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/lzo
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! lzo 1.08_0 >= lzo 1.08_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main readline 6.1.000_1 exists in the ports tree
 :debug:main readline 6.1.000_1 +universal is the latest installed
 :debug:main readline 6.1.000_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jpeg 8b_0 exists in the ports tree
 :debug:main jpeg 8b_0 +universal is the latest installed
 :debug:main jpeg 8b_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main lcms 1.19_2 exists in the ports tree
 :debug:main lcms 1.19_2 +universal is the latest installed
 :debug:main lcms 1.19_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main tiff 3.9.4_0 exists in the ports tree
 :debug:main tiff 3.9.4_0 +universal is the latest installed
 :debug:main tiff 3.9.4_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpng 1.2.44_0 exists in the ports tree
 :debug:main libpng 1.2.44_0 +universal is the latest installed
 :debug:main libpng 1.2.44_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxml2 2.7.7_0 exists in the ports tree
 :debug:main libxml2 2.7.7_0 +universal is the latest installed
 :debug:main libxml2 2.7.7_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxslt 1.1.26_0 exists in the ports tree
 :debug:main libxslt 1.1.26_0 +universal is the latest installed
 :debug:main libxslt 1.1.26_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.0a_0 exists in the ports tree
 :debug:main openssl 1.0.0a_0 +universal is the latest installed
 :debug:main openssl 1.0.0a_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! openssl 1.0.0a_0 >= openssl 1.0.0a_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libsm 1.1.1_0 exists in the ports tree
 :debug:main xorg-libsm 1.1.1_0 +universal is the latest installed
 :debug:main xorg-libsm 1.1.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libsm
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libice 1.0.6_0 exists in the ports tree
 :debug:main xorg-libice 1.0.6_0 +universal is the latest installed
 :debug:main xorg-libice 1.0.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libice
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xproto 7.0.18_0 exists in the ports tree
 :debug:main xorg-xproto 7.0.18_0  is the latest installed
 :debug:main xorg-xproto 7.0.18_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 xproto.
 :debug:main No need to upgrade! xorg-xproto 7.0.18_0 >= xorg-xproto
 7.0.18_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcomposite 0.4.2_0 exists in the ports tree
 :debug:main xorg-libXcomposite 0.4.2_0 +universal is the latest installed
 :debug:main xorg-libXcomposite 0.4.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcomposite
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXcomposite 0.4.2_0 >= xorg-
 libXcomposite 0.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXfixes 4.0.5_0 exists in the ports tree
 :debug:main xorg-libXfixes 4.0.5_0 +universal is the latest installed
 :debug:main xorg-libXfixes 4.0.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXfixes
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXfixes 4.0.5_0 >= xorg-libXfixes
 4.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libX11 1.3.5_0 exists in the ports tree
 :debug:main xorg-libX11 1.3.5_0 +universal is the latest installed
 :debug:main xorg-libX11 1.3.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libX11 1.3.5_0 >= xorg-libX11 1.3.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree
 :debug:main xorg-libXdmcp 1.0.3_0 +universal is the latest installed
 :debug:main xorg-libXdmcp 1.0.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp
 1.0.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree
 :debug:main xorg-libXau 1.0.6_0 +universal is the latest installed
 :debug:main xorg-libXau 1.0.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
 :debug:main xorg-kbproto 1.0.5_0  is the latest installed
 :debug:main xorg-kbproto 1.0.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 kbproto.
 :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
 1.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-fixesproto 4.1.1_0 exists in the ports tree
 :debug:main xorg-fixesproto 4.1.1_0  is the latest installed
 :debug:main xorg-fixesproto 4.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 fixesproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 fixesproto.
 :debug:main No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto
 4.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXext 1.1.2_0 exists in the ports tree
 :debug:main xorg-libXext 1.1.2_0 +universal is the latest installed
 :debug:main xorg-libXext 1.1.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext
 1.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xextproto 7.1.2_0 exists in the ports tree
 :debug:main xorg-xextproto 7.1.2_0  is the latest installed
 :debug:main xorg-xextproto 7.1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 xextproto.
 :debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto
 7.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-compositeproto 0.4.1_0 exists in the ports tree
 :debug:main xorg-compositeproto 0.4.1_0  is the latest installed
 :debug:main xorg-compositeproto 0.4.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 compositeproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 compositeproto.
 :debug:main No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-
 compositeproto 0.4.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcursor 1.1.10_0 exists in the ports tree
 :debug:main xorg-libXcursor 1.1.10_0 +universal is the latest installed
 :debug:main xorg-libXcursor 1.1.10_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcursor
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-
 libXcursor 1.1.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xrender 0.9.6_0 exists in the ports tree
 :debug:main xrender 0.9.6_0 +universal is the latest installed
 :debug:main xrender 0.9.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
 :debug:main xorg-renderproto 0.11.1_0  is the latest installed
 :debug:main xorg-renderproto 0.11.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 renderproto.
 :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
 renderproto 0.11.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXi 1.3.2_0 exists in the ports tree
 :debug:main xorg-libXi 1.3.2_0 +universal is the latest installed
 :debug:main xorg-libXi 1.3.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXi 1.3.2_0 >= xorg-libXi 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-inputproto 2.0_0 exists in the ports tree
 :debug:main xorg-inputproto 2.0_0  is the latest installed
 :debug:main xorg-inputproto 2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 inputproto.
 :debug:main No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto
 2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXinerama 1.1_0 exists in the ports tree
 :debug:main xorg-libXinerama 1.1_0 +universal is the latest installed
 :debug:main xorg-libXinerama 1.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXinerama
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama
 1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xineramaproto 1.2_0 exists in the ports tree
 :debug:main xorg-xineramaproto 1.2_0  is the latest installed
 :debug:main xorg-xineramaproto 1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xineramaproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 xineramaproto.
 :debug:main No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-
 xineramaproto 1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXrandr 1.3.0_1 exists in the ports tree
 :debug:main xorg-libXrandr 1.3.0_1 +universal is the latest installed
 :debug:main xorg-libXrandr 1.3.0_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr
 1.3.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-randrproto 1.3.1_0 exists in the ports tree
 :debug:main xorg-randrproto 1.3.1_0  is the latest installed
 :debug:main xorg-randrproto 1.3.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 randrproto.
 :debug:main No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto
 1.3.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXxf86vm 1.1.0_0 exists in the ports tree
 :debug:main xorg-libXxf86vm 1.1.0_0 +universal is the latest installed
 :debug:main xorg-libXxf86vm 1.1.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXxf86vm
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXxf86vm 1.1.0_0 >= xorg-libXxf86vm
 1.1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xf86vidmodeproto 2.3_0 exists in the ports tree
 :debug:main xorg-xf86vidmodeproto 2.3_0  is the latest installed
 :debug:main xorg-xf86vidmodeproto 2.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86vidmodeproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 xf86vidmodeproto.
 :debug:main No need to upgrade! xorg-xf86vidmodeproto 2.3_0 >= xorg-
 xf86vidmodeproto 2.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main mesa 7.8.2_2 exists in the ports tree
 :debug:main mesa 7.8.2_2 +universal is the latest installed
 :debug:main mesa 7.8.2_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! mesa 7.8.2_2 >= mesa 7.8.2_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-glproto 1.4.12_0 exists in the ports tree
 :debug:main xorg-glproto 1.4.12_0  is the latest installed
 :debug:main xorg-glproto 1.4.12_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 glproto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 glproto.
 :debug:main No need to upgrade! xorg-glproto 1.4.12_0 >= xorg-glproto
 1.4.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-dri2proto 2.3_0 exists in the ports tree
 :debug:main xorg-dri2proto 2.3_0  is the latest installed
 :debug:main xorg-dri2proto 2.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 dri2proto
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port xorg-
 dri2proto.
 :debug:main No need to upgrade! xorg-dri2proto 2.3_0 >= xorg-dri2proto
 2.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXmu 1.0.5_0 exists in the ports tree
 :debug:main xorg-libXmu 1.0.5_0 +universal is the latest installed
 :debug:main xorg-libXmu 1.0.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXmu
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXt 1.0.8_0 exists in the ports tree
 :debug:main xorg-libXt 1.0.8_0 +universal is the latest installed
 :debug:main xorg-libXt 1.0.8_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXt
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0
 :msg:main --->  Computing dependencies for wine-devel:info:main
 .:debug:main Searching for dependency: flex
 :debug:main Found Dependency: receipt exists for flex
 :debug:main Searching for dependency: pkgconfig
 :debug:main Found Dependency: receipt exists for pkgconfig
 :debug:main Searching for dependency: expat
 :debug:main Found Dependency: receipt exists for expat
 :debug:main Searching for dependency: fontconfig
 :debug:main Found Dependency: receipt exists for fontconfig
 :debug:main Searching for dependency: freetype
 :debug:main Found Dependency: receipt exists for freetype
 :debug:main Searching for dependency: gnutls
 :debug:main Found Dependency: receipt exists for gnutls
 :debug:main Searching for dependency: jpeg
 :debug:main Found Dependency: receipt exists for jpeg
 :debug:main Searching for dependency: lcms
 :debug:main Found Dependency: receipt exists for lcms
 :debug:main Searching for dependency: libiconv
 :debug:main Found Dependency: receipt exists for libiconv
 :debug:main Searching for dependency: libpng
 :debug:main Found Dependency: receipt exists for libpng
 :debug:main Searching for dependency: libxml2
 :debug:main Found Dependency: receipt exists for libxml2
 :debug:main Searching for dependency: libxslt
 :debug:main Found Dependency: receipt exists for libxslt
 :debug:main Searching for dependency: ncurses
 :debug:main Found Dependency: receipt exists for ncurses
 :debug:main Searching for dependency: openssl
 :debug:main Found Dependency: receipt exists for openssl
 :debug:main Searching for dependency: tiff
 :debug:main Found Dependency: receipt exists for tiff
 :debug:main Searching for dependency: zlib
 :debug:main Found Dependency: receipt exists for zlib
 :debug:main Searching for dependency: xorg-libsm
 :debug:main Found Dependency: receipt exists for xorg-libsm
 :debug:main Searching for dependency: xorg-libXcomposite
 :debug:main Found Dependency: receipt exists for xorg-libXcomposite
 :debug:main Searching for dependency: xorg-libXcursor
 :debug:main Found Dependency: receipt exists for xorg-libXcursor
 :debug:main Searching for dependency: xorg-libXi
 :debug:main Found Dependency: receipt exists for xorg-libXi
 :debug:main Searching for dependency: xorg-libXinerama
 :debug:main Found Dependency: receipt exists for xorg-libXinerama
 :debug:main Searching for dependency: xorg-libXrandr
 :debug:main Found Dependency: receipt exists for xorg-libXrandr
 :debug:main Searching for dependency: xorg-libXxf86vm
 :debug:main Found Dependency: receipt exists for xorg-libXxf86vm
 :debug:main Searching for dependency: xrender
 :debug:main Found Dependency: receipt exists for xrender
 :debug:main Searching for dependency: mesa
 :debug:main Found Dependency: receipt exists for mesa
 :msg:main
 :debug:main Executing org.macports.main (wine-devel)
 :debug:main Skipping completed org.macports.fetch (wine-devel)
 :debug:main Skipping completed org.macports.checksum (wine-devel)
 :debug:main setting option extract.cmd to /usr/bin/bzip2
 :debug:main Skipping completed org.macports.extract (wine-devel)
 :debug:main Skipping completed org.macports.patch (wine-devel)
 :msg:main --->  Configuring wine-devel
 :debug:main Using compiler 'Mac OS X gcc 4.2'
 :debug:configure configure phase started at Sun Aug 29 02:46:48 EDT 2010
 :debug:configure Executing proc-pre-org.macports.configure-configure-0
 :debug:configure Executing org.macports.configure (wine-devel)
 :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2
 -arch i386' CPPFLAGS='-I/opt/local/include -D_DARWIN_NO_64_BIT_INODE'
 CXXFLAGS='-pipe -O2 -arch i386' LIBRARY_PATH='/opt/local/lib'
 MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_x11_wine-devel/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe
 -O2 -m32' LDFLAGS='-L/opt/local/lib -framework CoreServices -lz -arch
 i386' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m32'
 INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch i386'
 FFLAGS='-pipe -O2 -m32' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
 :debug:configure Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_x11_wine-devel/work/wine-1.3.1" && ./configure
 --prefix=/opt/local --without-alsa --without-audioio --without-capi
 --with-cms --with-coreaudio --without-cups --with-curses --without-esd
 --with-fontconfig --with-freetype --without-gphoto --with-glu --with-
 gnutls --without-gsm --without-hal --without-jack --with-jpeg --without-
 ldap --without-mpg123 --without-nas --without-openal --with-opengl --with-
 openssl --without-oss --with-png --with-pthread --without-sane --with-tiff
 --without-v4l --with-xcomposite --with-xcursor --with-xinerama --with-
 xinput --with-xml --with-xrandr --with-xrender --with-xshape --with-xshm
 --with-xslt --with-xxf86vm --with-x --x-include=/opt/local/include
 --x-lib=/opt/local/lib'
 :info:configure checking build system type... x86_64-apple-darwin10.4.0
 :info:configure checking host system type... x86_64-apple-darwin10.4.0
 :info:configure checking whether make sets $(MAKE)... yes
 :info:configure checking for gcc... /usr/bin/gcc-4.2
 :info:configure checking whether the C compiler works... yes
 :info:configure checking for C compiler default output file name... a.out
 :info:configure checking for suffix of executables...
 :info:configure checking whether we are cross compiling... no
 :info:configure checking for suffix of object files... o
 :info:configure checking whether we are using the GNU C compiler... yes
 :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
 :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89...
 none needed
 :info:configure checking whether we are using the GNU C++ compiler... yes
 :info:configure checking whether /usr/bin/g++-4.2 accepts -g... yes
 :info:configure checking for cpp... cpp
 :info:configure checking for the directory containing the Wine tools...
 $(TOPOBJDIR)
 :info:configure checking for flex... flex
 :info:configure checking whether flex is recent enough... yes
 :info:configure checking for bison... bison
 :info:configure checking for ar... ar
 :info:configure checking for ranlib... ranlib
 :info:configure checking for strip... strip
 :info:configure checking whether ln -s works... yes
 :info:configure checking for grep that handles long lines and -e...
 /usr/bin/grep
 :info:configure checking for egrep... /usr/bin/grep -E
 :info:configure checking for ldconfig... true
 :info:configure checking for a BSD-compatible install... /usr/bin/install
 -c
 :info:configure checking for lclint... no
 :info:configure checking for lint... no
 :info:configure checking for fontforge... no
 :info:configure checking for pkg-config... pkg-config
 :info:configure checking for rsvg... no
 :info:configure checking for convert... no
 :info:configure checking for icotool... no
 :info:configure checking for prelink... false
 :info:configure checking for i386_set_ldt in -li386... no
 :info:configure checking for _oss_ioctl in -lossaudio... no
 :info:configure checking for special C compiler options needed for large
 files... no
 :info:configure checking for _FILE_OFFSET_BITS value needed for large
 files... no
 :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2
 -m32 -E
 :info:configure checking for ANSI C header files... yes
 :info:configure checking for sys/types.h... yes
 :info:configure checking for sys/stat.h... yes
 :info:configure checking for stdlib.h... yes
 :info:configure checking for string.h... yes
 :info:configure checking for memory.h... yes
 :info:configure checking for strings.h... yes
 :info:configure checking for inttypes.h... yes
 :info:configure checking for stdint.h... yes
 :info:configure checking for unistd.h... yes
 :info:configure checking for AL/al.h... (cached) no
 :info:configure checking AudioToolbox/AudioConverter.h usability... yes
 :info:configure checking AudioToolbox/AudioConverter.h presence... yes
 :info:configure checking for AudioToolbox/AudioConverter.h... yes
 :info:configure checking AudioUnit/AudioUnit.h usability... yes
 :info:configure checking AudioUnit/AudioUnit.h presence... yes
 :info:configure checking for AudioUnit/AudioUnit.h... yes
 :info:configure checking Carbon/Carbon.h usability... yes
 :info:configure checking Carbon/Carbon.h presence... yes
 :info:configure checking for Carbon/Carbon.h... yes
 :info:configure checking CoreAudio/CoreAudio.h usability... yes
 :info:configure checking CoreAudio/CoreAudio.h presence... yes
 :info:configure checking for CoreAudio/CoreAudio.h... yes
 :info:configure checking DiskArbitration/DiskArbitration.h usability...
 yes
 :info:configure checking DiskArbitration/DiskArbitration.h presence... yes
 :info:configure checking for DiskArbitration/DiskArbitration.h... yes
 :info:configure checking IOKit/IOKitLib.h usability... yes
 :info:configure checking IOKit/IOKitLib.h presence... yes
 :info:configure checking for IOKit/IOKitLib.h... yes
 :info:configure checking IOKit/hid/IOHIDLib.h usability... yes
 :info:configure checking IOKit/hid/IOHIDLib.h presence... yes
 :info:configure checking for IOKit/hid/IOHIDLib.h... yes
 :info:configure checking for OpenAL/al.h... (cached) no
 :info:configure checking alias.h usability... no
 :info:configure checking alias.h presence... no
 :info:configure checking for alias.h... no
 :info:configure checking for alsa/asoundlib.h... (cached) no
 :info:configure checking arpa/inet.h usability... yes
 :info:configure checking arpa/inet.h presence... yes
 :info:configure checking for arpa/inet.h... yes
 :info:configure checking arpa/nameser.h usability... yes
 :info:configure checking arpa/nameser.h presence... yes
 :info:configure checking for arpa/nameser.h... yes
 :info:configure checking asm/types.h usability... no
 :info:configure checking asm/types.h presence... no
 :info:configure checking for asm/types.h... no
 :info:configure checking for capi20.h... (cached) no
 :info:configure checking curses.h usability... yes
 :info:configure checking curses.h presence... yes
 :info:configure checking for curses.h... yes
 :info:configure checking direct.h usability... no
 :info:configure checking direct.h presence... no
 :info:configure checking for direct.h... no
 :info:configure checking dirent.h usability... yes
 :info:configure checking dirent.h presence... yes
 :info:configure checking for dirent.h... yes
 :info:configure checking dlfcn.h usability... yes
 :info:configure checking dlfcn.h presence... yes
 :info:configure checking for dlfcn.h... yes
 :info:configure checking elf.h usability... no
 :info:configure checking elf.h presence... no
 :info:configure checking for elf.h... no
 :info:configure checking float.h usability... yes
 :info:configure checking float.h presence... yes
 :info:configure checking for float.h... yes
 :info:configure checking fnmatch.h usability... yes
 :info:configure checking fnmatch.h presence... yes
 :info:configure checking for fnmatch.h... yes
 :info:configure checking fontconfig/fontconfig.h usability... yes
 :info:configure checking fontconfig/fontconfig.h presence... yes
 :info:configure checking for fontconfig/fontconfig.h... yes
 :info:configure checking getopt.h usability... yes
 :info:configure checking getopt.h presence... yes
 :info:configure checking for getopt.h... yes
 :info:configure checking grp.h usability... yes
 :info:configure checking grp.h presence... yes
 :info:configure checking for grp.h... yes
 :info:configure checking for gsm.h... (cached) no
 :info:configure checking for gsm/gsm.h... (cached) no
 :info:configure checking ieeefp.h usability... no
 :info:configure checking ieeefp.h presence... no
 :info:configure checking for ieeefp.h... no
 :info:configure checking inet/mib2.h usability... no
 :info:configure checking inet/mib2.h presence... no
 :info:configure checking for inet/mib2.h... no
 :info:configure checking io.h usability... no
 :info:configure checking io.h presence... no
 :info:configure checking for io.h... no
 :info:configure checking for jack/jack.h... (cached) no
 :info:configure checking jpeglib.h usability... yes
 :info:configure checking jpeglib.h presence... yes
 :info:configure checking for jpeglib.h... yes
 :info:configure checking kstat.h usability... no
 :info:configure checking kstat.h presence... no
 :info:configure checking for kstat.h... no
 :info:configure checking for lber.h... (cached) no
 :info:configure checking lcms.h usability... yes
 :info:configure checking lcms.h presence... yes
 :info:configure checking for lcms.h... yes
 :info:configure checking lcms/lcms.h usability... no
 :info:configure checking lcms/lcms.h presence... no
 :info:configure checking for lcms/lcms.h... no
 :info:configure checking for ldap.h... (cached) no
 :info:configure checking for libaudioio.h... (cached) no
 :info:configure checking link.h usability... no
 :info:configure checking link.h presence... no
 :info:configure checking for link.h... no
 :info:configure checking linux/cdrom.h usability... no
 :info:configure checking linux/cdrom.h presence... no
 :info:configure checking for linux/cdrom.h... no
 :info:configure checking linux/compiler.h usability... no
 :info:configure checking linux/compiler.h presence... no
 :info:configure checking for linux/compiler.h... no
 :info:configure checking linux/hdreg.h usability... no
 :info:configure checking linux/hdreg.h presence... no
 :info:configure checking for linux/hdreg.h... no
 :info:configure checking linux/input.h usability... no
 :info:configure checking linux/input.h presence... no
 :info:configure checking for linux/input.h... no
 :info:configure checking linux/ioctl.h usability... no
 :info:configure checking linux/ioctl.h presence... no
 :info:configure checking for linux/ioctl.h... no
 :info:configure checking linux/joystick.h usability... no
 :info:configure checking linux/joystick.h presence... no
 :info:configure checking for linux/joystick.h... no
 :info:configure checking linux/major.h usability... no
 :info:configure checking linux/major.h presence... no
 :info:configure checking for linux/major.h... no
 :info:configure checking linux/param.h usability... no
 :info:configure checking linux/param.h presence... no
 :info:configure checking for linux/param.h... no
 :info:configure checking linux/serial.h usability... no
 :info:configure checking linux/serial.h presence... no
 :info:configure checking for linux/serial.h... no
 :info:configure checking linux/types.h usability... no
 :info:configure checking linux/types.h presence... no
 :info:configure checking for linux/types.h... no
 :info:configure checking linux/ucdrom.h usability... no
 :info:configure checking linux/ucdrom.h presence... no
 :info:configure checking for linux/ucdrom.h... no
 :info:configure checking mach-o/nlist.h usability... yes
 :info:configure checking mach-o/nlist.h presence... yes
 :info:configure checking for mach-o/nlist.h... yes
 :info:configure checking mach/mach.h usability... yes
 :info:configure checking mach/mach.h presence... yes
 :info:configure checking for mach/mach.h... yes
 :info:configure checking mach/machine.h usability... yes
 :info:configure checking mach/machine.h presence... yes
 :info:configure checking for mach/machine.h... yes
 :info:configure checking machine/cpu.h usability... no
 :info:configure checking machine/cpu.h presence... no
 :info:configure checking for machine/cpu.h... no
 :info:configure checking machine/limits.h usability... yes
 :info:configure checking machine/limits.h presence... yes
 :info:configure checking for machine/limits.h... yes
 :info:configure checking for machine/soundcard.h... (cached) no
 :info:configure checking machine/sysarch.h usability... no
 :info:configure checking machine/sysarch.h presence... no
 :info:configure checking for machine/sysarch.h... no
 :info:configure checking mntent.h usability... no
 :info:configure checking mntent.h presence... no
 :info:configure checking for mntent.h... no
 :info:configure checking for mpg123.h... (cached) no
 :info:configure checking ncurses.h usability... yes
 :info:configure checking ncurses.h presence... yes
 :info:configure checking for ncurses.h... yes
 :info:configure checking netdb.h usability... yes
 :info:configure checking netdb.h presence... yes
 :info:configure checking for netdb.h... yes
 :info:configure checking netinet/in.h usability... yes
 :info:configure checking netinet/in.h presence... yes
 :info:configure checking for netinet/in.h... yes
 :info:configure checking netinet/in_systm.h usability... yes
 :info:configure checking netinet/in_systm.h presence... yes
 :info:configure checking for netinet/in_systm.h... yes
 :info:configure checking netinet/tcp.h usability... yes
 :info:configure checking netinet/tcp.h presence... yes
 :info:configure checking for netinet/tcp.h... yes
 :info:configure checking netinet/tcp_fsm.h usability... yes
 :info:configure checking netinet/tcp_fsm.h presence... yes
 :info:configure checking for netinet/tcp_fsm.h... yes
 :info:configure checking openssl/err.h usability... no
 :info:configure checking openssl/err.h presence... no
 :info:configure checking for openssl/err.h... no
 :info:configure checking openssl/ssl.h usability... no
 :info:configure checking openssl/ssl.h presence... no
 :info:configure checking for openssl/ssl.h... no
 :info:configure checking png.h usability... yes
 :info:configure checking png.h presence... yes
 :info:configure checking for png.h... yes
 :info:configure checking poll.h usability... yes
 :info:configure checking poll.h presence... yes
 :info:configure checking for poll.h... yes
 :info:configure checking port.h usability... no
 :info:configure checking port.h presence... no
 :info:configure checking for port.h... no
 :info:configure checking process.h usability... no
 :info:configure checking process.h presence... no
 :info:configure checking for process.h... no
 :info:configure checking pthread.h usability... yes
 :info:configure checking pthread.h presence... yes
 :info:configure checking for pthread.h... yes
 :info:configure checking pwd.h usability... yes
 :info:configure checking pwd.h presence... yes
 :info:configure checking for pwd.h... yes
 :info:configure checking regex.h usability... yes
 :info:configure checking regex.h presence... yes
 :info:configure checking for regex.h... yes
 :info:configure checking sched.h usability... yes
 :info:configure checking sched.h presence... yes
 :info:configure checking for sched.h... yes
 :info:configure checking scsi/scsi.h usability... no
 :info:configure checking scsi/scsi.h presence... no
 :info:configure checking for scsi/scsi.h... no
 :info:configure checking scsi/scsi_ioctl.h usability... no
 :info:configure checking scsi/scsi_ioctl.h presence... no
 :info:configure checking for scsi/scsi_ioctl.h... no
 :info:configure checking scsi/sg.h usability... no
 :info:configure checking scsi/sg.h presence... no
 :info:configure checking for scsi/sg.h... no
 :info:configure checking for soundcard.h... (cached) no
 :info:configure checking stdbool.h usability... yes
 :info:configure checking stdbool.h presence... yes
 :info:configure checking for stdbool.h... yes
 :info:configure checking for stdint.h... (cached) yes
 :info:configure checking for strings.h... (cached) yes
 :info:configure checking stropts.h usability... no
 :info:configure checking stropts.h presence... no
 :info:configure checking for stropts.h... no
 :info:configure checking for sys/asoundlib.h... (cached) no
 :info:configure checking sys/cdio.h usability... no
 :info:configure checking sys/cdio.h presence... no
 :info:configure checking for sys/cdio.h... no
 :info:configure checking sys/elf32.h usability... no
 :info:configure checking sys/elf32.h presence... no
 :info:configure checking for sys/elf32.h... no
 :info:configure checking sys/epoll.h usability... no
 :info:configure checking sys/epoll.h presence... no
 :info:configure checking for sys/epoll.h... no
 :info:configure checking sys/errno.h usability... yes
 :info:configure checking sys/errno.h presence... yes
 :info:configure checking for sys/errno.h... yes
 :info:configure checking sys/event.h usability... yes
 :info:configure checking sys/event.h presence... yes
 :info:configure checking for sys/event.h... yes
 :info:configure checking sys/exec_elf.h usability... no
 :info:configure checking sys/exec_elf.h presence... no
 :info:configure checking for sys/exec_elf.h... no
 :info:configure checking sys/filio.h usability... yes
 :info:configure checking sys/filio.h presence... yes
 :info:configure checking for sys/filio.h... yes
 :info:configure checking sys/inotify.h usability... no
 :info:configure checking sys/inotify.h presence... no
 :info:configure checking for sys/inotify.h... no
 :info:configure checking sys/ioctl.h usability... yes
 :info:configure checking sys/ioctl.h presence... yes
 :info:configure checking for sys/ioctl.h... yes
 :info:configure checking sys/ipc.h usability... yes
 :info:configure checking sys/ipc.h presence... yes
 :info:configure checking for sys/ipc.h... yes
 :info:configure checking sys/limits.h usability... no
 :info:configure checking sys/limits.h presence... no
 :info:configure checking for sys/limits.h... no
 :info:configure checking sys/link.h usability... no
 :info:configure checking sys/link.h presence... no
 :info:configure checking for sys/link.h... no
 :info:configure checking sys/mman.h usability... yes
 :info:configure checking sys/mman.h presence... yes
 :info:configure checking for sys/mman.h... yes
 :info:configure checking sys/modem.h usability... no
 :info:configure checking sys/modem.h presence... no
 :info:configure checking for sys/modem.h... no
 :info:configure checking sys/msg.h usability... yes
 :info:configure checking sys/msg.h presence... yes
 :info:configure checking for sys/msg.h... yes
 :info:configure checking sys/mtio.h usability... no
 :info:configure checking sys/mtio.h presence... no
 :info:configure checking for sys/mtio.h... no
 :info:configure checking sys/param.h usability... yes
 :info:configure checking sys/param.h presence... yes
 :info:configure checking for sys/param.h... yes
 :info:configure checking sys/poll.h usability... yes
 :info:configure checking sys/poll.h presence... yes
 :info:configure checking for sys/poll.h... yes
 :info:configure checking sys/prctl.h usability... no
 :info:configure checking sys/prctl.h presence... no
 :info:configure checking for sys/prctl.h... no
 :info:configure checking sys/protosw.h usability... yes
 :info:configure checking sys/protosw.h presence... yes
 :info:configure checking for sys/protosw.h... yes
 :info:configure checking sys/ptrace.h usability... yes
 :info:configure checking sys/ptrace.h presence... yes
 :info:configure checking for sys/ptrace.h... yes
 :info:configure checking sys/resource.h usability... yes
 :info:configure checking sys/resource.h presence... yes
 :info:configure checking for sys/resource.h... yes
 :info:configure checking sys/scsiio.h usability... no
 :info:configure checking sys/scsiio.h presence... no
 :info:configure checking for sys/scsiio.h... no
 :info:configure checking sys/shm.h usability... yes
 :info:configure checking sys/shm.h presence... yes
 :info:configure checking for sys/shm.h... yes
 :info:configure checking sys/signal.h usability... yes
 :info:configure checking sys/signal.h presence... yes
 :info:configure checking for sys/signal.h... yes
 :info:configure checking sys/socket.h usability... yes
 :info:configure checking sys/socket.h presence... yes
 :info:configure checking for sys/socket.h... yes
 :info:configure checking sys/socketvar.h usability... yes
 :info:configure checking sys/socketvar.h presence... yes
 :info:configure checking for sys/socketvar.h... yes
 :info:configure checking sys/sockio.h usability... yes
 :info:configure checking sys/sockio.h presence... yes
 :info:configure checking for sys/sockio.h... yes
 :info:configure checking for sys/soundcard.h... (cached) no
 :info:configure checking sys/statvfs.h usability... yes
 :info:configure checking sys/statvfs.h presence... yes
 :info:configure checking for sys/statvfs.h... yes
 :info:configure checking sys/strtio.h usability... no
 :info:configure checking sys/strtio.h presence... no
 :info:configure checking for sys/strtio.h... no
 :info:configure checking sys/syscall.h usability... yes
 :info:configure checking sys/syscall.h presence... yes
 :info:configure checking for sys/syscall.h... yes
 :info:configure checking sys/tihdr.h usability... no
 :info:configure checking sys/tihdr.h presence... no
 :info:configure checking for sys/tihdr.h... no
 :info:configure checking sys/time.h usability... yes
 :info:configure checking sys/time.h presence... yes
 :info:configure checking for sys/time.h... yes
 :info:configure checking sys/timeout.h usability... no
 :info:configure checking sys/timeout.h presence... no
 :info:configure checking for sys/timeout.h... no
 :info:configure checking sys/times.h usability... yes
 :info:configure checking sys/times.h presence... yes
 :info:configure checking for sys/times.h... yes
 :info:configure checking sys/uio.h usability... yes
 :info:configure checking sys/uio.h presence... yes
 :info:configure checking for sys/uio.h... yes
 :info:configure checking sys/un.h usability... yes
 :info:configure checking sys/un.h presence... yes
 :info:configure checking for sys/un.h... yes
 :info:configure checking sys/utsname.h usability... yes
 :info:configure checking sys/utsname.h presence... yes
 :info:configure checking for sys/utsname.h... yes
 :info:configure checking sys/vm86.h usability... no
 :info:configure checking sys/vm86.h presence... no
 :info:configure checking for sys/vm86.h... no
 :info:configure checking sys/wait.h usability... yes
 :info:configure checking sys/wait.h presence... yes
 :info:configure checking for sys/wait.h... yes
 :info:configure checking syscall.h usability... no
 :info:configure checking syscall.h presence... no
 :info:configure checking for syscall.h... no
 :info:configure checking termios.h usability... yes
 :info:configure checking termios.h presence... yes
 :info:configure checking for termios.h... yes
 :info:configure checking tiffio.h usability... yes
 :info:configure checking tiffio.h presence... yes
 :info:configure checking for tiffio.h... yes
 :info:configure checking for unistd.h... (cached) yes
 :info:configure checking utime.h usability... yes
 :info:configure checking utime.h presence... yes
 :info:configure checking for utime.h... yes
 :info:configure checking valgrind/memcheck.h usability... no
 :info:configure checking valgrind/memcheck.h presence... no
 :info:configure checking for valgrind/memcheck.h... no
 :info:configure checking valgrind/valgrind.h usability... no
 :info:configure checking valgrind/valgrind.h presence... no
 :info:configure checking for valgrind/valgrind.h... no
 :info:configure checking zlib.h usability... yes
 :info:configure checking zlib.h presence... yes
 :info:configure checking for zlib.h... yes
 :info:configure checking whether stat file-mode macros are broken... no
 :info:configure checking for sys/mount.h... yes
 :info:configure checking for sys/statfs.h... no
 :info:configure checking for sys/sysctl.h... yes
 :info:configure checking for sys/user.h... yes
 :info:configure checking for sys/vfs.h... no
 :info:configure checking for netinet/ip.h... yes
 :info:configure checking for net/if.h... yes
 :info:configure checking for net/if_arp.h... yes
 :info:configure checking for net/if_dl.h... yes
 :info:configure checking for net/if_types.h... yes
 :info:configure checking for net/route.h... yes
 :info:configure checking for netinet/if_ether.h... yes
 :info:configure checking for netinet/if_inarp.h... no
 :info:configure checking for netinet/in_pcb.h... yes
 :info:configure checking for netinet/ip_icmp.h... yes
 :info:configure checking for netinet/ip_var.h... yes
 :info:configure checking for netinet/udp.h... yes
 :info:configure checking for netipx/ipx.h... no
 :info:configure checking for netinet/tcp_timer.h... yes
 :info:configure checking for netinet/udp_var.h... yes
 :info:configure checking for netinet/icmp_var.h... yes
 :info:configure checking for netinet/tcp_var.h... yes
 :info:configure checking for linux/ipx.h... no
 :info:configure checking for linux/irda.h... no
 :info:configure checking for mach-o/dyld_images.h... yes
 :info:configure checking for resolv.h... yes
 :info:configure checking for ifaddrs.h... yes
 :info:configure checking for ucontext.h... no
 :info:configure checking for sys/thr.h... no
 :info:configure checking for pthread_np.h... no
 :info:configure checking for linux/videodev.h... no
 :info:configure checking for linux/capi.h... (cached) no
 :info:configure checking for ldd... true
 :info:configure checking for IOHIDManagerCreate... yes
 :info:configure checking whether 16-bit code can be built correctly... yes
 :info:configure checking for i686-pc-mingw32-gcc... no
 :info:configure checking for i586-pc-mingw32-gcc... no
 :info:configure checking for i486-pc-mingw32-gcc... no
 :info:configure checking for i386-pc-mingw32-gcc... no
 :info:configure checking for i686-mingw32msvc-gcc... no
 :info:configure checking for i586-mingw32msvc-gcc... no
 :info:configure checking for i486-mingw32msvc-gcc... no
 :info:configure checking for i386-mingw32msvc-gcc... no
 :info:configure checking for i686-mingw32-gcc... no
 :info:configure checking for i586-mingw32-gcc... no
 :info:configure checking for i486-mingw32-gcc... no
 :info:configure checking for i386-mingw32-gcc... no
 :info:configure checking for pthread_create in -lpthread... yes
 :info:configure checking for X... libraries /opt/local/lib, headers
 /opt/local/include
 :info:configure checking whether -R must be followed by a space... no
 :info:configure checking for gethostbyname... yes
 :info:configure checking for connect... yes
 :info:configure checking for remove... yes
 :info:configure checking for shmat... yes
 :info:configure checking for IceConnectionNumber in -lICE... yes
 :info:configure checking for -lX11... libX11.6.dylib
 :info:configure checking for -lXext... libXext.6.dylib
 :info:configure checking for X11/Xlib.h... yes
 :info:configure checking for X11/XKBlib.h... yes
 :info:configure checking for X11/Xutil.h... yes
 :info:configure checking for X11/Xcursor/Xcursor.h... yes
 :info:configure checking for X11/extensions/shape.h... yes
 :info:configure checking for X11/extensions/XInput.h... yes
 :info:configure checking for X11/extensions/XShm.h... yes
 :info:configure checking for X11/extensions/Xcomposite.h... yes
 :info:configure checking for X11/extensions/Xinerama.h... yes
 :info:configure checking for X11/extensions/Xrandr.h... yes
 :info:configure checking for X11/extensions/Xrender.h... yes
 :info:configure checking for X11/extensions/xf86vmode.h... yes
 :info:configure checking for X11/extensions/xf86vmproto.h... yes
 :info:configure checking for XkbQueryExtension in -lX11... yes
 :info:configure checking for -lXcursor... libXcursor.1.dylib
 :info:configure checking for -lXi... libXi.6.dylib
 :info:configure checking for XShmQueryExtension in -lXext... yes
 :info:configure checking for XShapeQueryExtension in -lXext... yes
 :info:configure checking for -lXxf86vm... libXxf86vm.1.dylib
 :info:configure checking for -lXrender... libXrender.1.dylib
 :info:configure checking for XRenderSetPictureTransform in -lXrender...
 yes
 :info:configure checking for -lXrandr... libXrandr.2.dylib
 :info:configure checking for -lXinerama... libXinerama.1.dylib
 :info:configure checking for -lXcomposite... libXcomposite.1.dylib
 :info:configure checking for XICCallback.callback... yes
 :info:configure checking for GL/gl.h... yes
 :info:configure checking for GL/glx.h... yes
 :info:configure checking for GL/glu.h... yes
 :info:configure checking for up-to-date OpenGL version... yes
 :info:configure checking for -lGL... libGL.1.dylib
 :info:configure checking for -lGLU... libGLU.1.dylib
 :info:configure checking for audio/audiolib.h... (cached) no
 :info:configure checking libxml/parser.h usability... yes
 :info:configure checking libxml/parser.h presence... yes
 :info:configure checking for libxml/parser.h... yes
 :info:configure checking for xmlParseMemory in -lxml2... yes
 :info:configure checking for xmlReadMemory in -lxml2... yes
 :info:configure checking for xmlNewDocPI in -lxml2... yes
 :info:configure checking for libxslt/pattern.h... yes
 :info:configure checking for libxslt/transform.h... yes
 :info:configure checking for -lxslt... libxslt.1.dylib
 :info:configure checking gnutls/gnutls.h usability... yes
 :info:configure checking gnutls/gnutls.h presence... yes
 :info:configure checking for gnutls/gnutls.h... yes
 :info:configure checking for -lgnutls... libgnutls.26.dylib
 :info:configure checking for -lncurses... libncurses.5.dylib
 :info:configure checking for mousemask... yes
 :info:configure checking for cmsOpenProfileFromFile in -llcms... yes
 :info:configure checking for freetype-config... freetype-config
 :info:configure checking for -lfreetype... libfreetype.6.dylib
 :info:configure checking for ft2build.h... yes
 :info:configure checking for freetype/freetype.h... yes
 :info:configure checking for freetype/ftglyph.h... yes
 :info:configure checking for freetype/fttypes.h... yes
 :info:configure checking for freetype/tttables.h... yes
 :info:configure checking for freetype/ftsnames.h... yes
 :info:configure checking for freetype/ttnameid.h... yes
 :info:configure checking for freetype/ftoutln.h... yes
 :info:configure checking for freetype/ftwinfnt.h... yes
 :info:configure checking for freetype/ftmodapi.h... yes
 :info:configure checking for freetype/ftlcdfil.h... yes
 :info:configure checking for freetype/internal/sfnt.h... no
 :info:configure checking for FT_TrueTypeEngineType... yes
 :info:configure checking for FT_Load_Sfnt_Table... yes
 :info:configure checking for parport header/ppdev.h... no
 :info:configure checking for pthread_attr_get_np... no
 :info:configure checking for pthread_getattr_np... no
 :info:configure checking for pthread_get_stackaddr_np... yes
 :info:configure checking for pthread_get_stacksize_np... yes
 :info:configure checking for inflate in -lz... yes
 :info:configure checking for -lfontconfig... libfontconfig.1.dylib
 :info:configure configure: error: OpenSSL 32-bit development files not
 found, SSL won't be supported.
 :info:configure This is an error since --with-openssl was requested.
 :info:configure shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_x11_wine-devel/work/wine-1.3.1" && ./configure
 --prefix=/opt/local --without-alsa --without-audioio --without-capi
 --with-cms --with-coreaudio --without-cups --with-curses --without-esd
 --with-fontconfig --with-freetype --without-gphoto --with-glu --with-
 gnutls --without-gsm --without-hal --without-jack --with-jpeg --without-
 ldap --without-mpg123 --without-nas --without-openal --with-opengl --with-
 openssl --without-oss --with-png --with-pthread --without-sane --with-tiff
 --without-v4l --with-xcomposite --with-xcursor --with-xinerama --with-
 xinput --with-xml --with-xrandr --with-xrender --with-xshape --with-xshm
 --with-xslt --with-xxf86vm --with-x --x-include=/opt/local/include
 --x-lib=/opt/local/lib " returned error 1
 :error:configure Target org.macports.configure returned: configure
 failure: shell command failed
 :debug:configure Backtrace: configure failure: shell command failed
     while executing
 "$procedure $targetname"
 :info:configure Warning: the following items did not execute (for wine-
 devel): org.macports.activate org.macports.configure org.macports.build
 org.macports.destroot org.macports.install
 :notice:configure Log for wine-devel is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_x11_wine-devel/main.log
 }}}

--

Comment:

 Use WikiFormatting.[[br]]
 Fill in the Port field.[[br]]
 Cc the port's maintainer.[[br]]
 Don't set the Milestone field for port tickets.[[br]]
 Attach lengthy output instead of pasting it inline.[[br]]
 Use a meaningful ticket summary.[[br]]
 Search for duplicates. This appears to be a duplicate of #25991.

-- 
Ticket URL: <http://trac.macports.org/ticket/26275#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list