[MacPorts] #27731: epiphany-extensions fails to install

Sun Dec 19 06:42:48 PST 2010

#27731: epiphany-extensions fails to install
---------------------------------------------------+------------------------
 Reporter:  lagrave+bugs+macosforge.org@…          |       Owner:  macports-tickets@…                   
     Type:  defect                                 |      Status:  new                                  
 Priority:  Normal                                 |   Milestone:                                       
Component:  ports                                  |     Version:  1.9.2                                
 Keywords:                                         |        Port:  epiphany-extensions                  
---------------------------------------------------+------------------------
 {{{
 % port install epiphany-extensions
 --->  Computing dependencies for epiphany-extensions
 --->  Configuring epiphany-extensions
 Error: Target org.macports.configure returned: configure failure: shell
 command failed (see log for details)
 Log for epiphany-extensions is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_gnome_epiphany-extensions/main.log
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>


 % less
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_gnome_epiphany-extensions/main.log
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main epiphany 2.30.6_2 exists in the ports tree
 :debug:main epiphany 2.30.6_2  is the latest installed
 :debug:main epiphany 2.30.6_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/epiphany
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! epiphany 2.30.6_2 >= epiphany 2.30.6_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gconf 2.28.1_0 exists in the ports tree
 :debug:main gconf 2.28.1_0  is the latest installed
 :debug:main gconf 2.28.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gconf 2.28.1_0 >= gconf 2.28.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gtk2 2.22.1_0 exists in the ports tree
 :debug:main gtk2 2.22.1_0 +x11 is the latest installed
 :debug:main gtk2 2.22.1_0 +x11 is active
 :debug:main Merging existing variants '+x11' into variants
 :debug:main new fully merged portvariants: x11 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant x11 provides x11
 :debug:main No need to upgrade! gtk2 2.22.1_0 >= gtk2 2.22.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main atk 1.30.0_0 exists in the ports tree
 :debug:main atk 1.30.0_0  is the latest installed
 :debug:main atk 1.30.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! atk 1.30.0_0 >= atk 1.30.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main glib2 2.26.1_0 exists in the ports tree
 :debug:main glib2 2.26.1_0  is the latest installed
 :debug:main glib2 2.26.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! glib2 2.26.1_0 >= glib2 2.26.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2  is the latest installed
 :debug:main gettext 0.18.1.1_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.13.1_0 exists in the ports tree
 :debug:main libiconv 1.13.1_0  is the latest installed
 :debug:main libiconv 1.13.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.7_1 exists in the ports tree
 :debug:main ncurses 5.7_1  is the latest installed
 :debug:main ncurses 5.7_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncursesw 5.7_1 exists in the ports tree
 :debug:main ncursesw 5.7_1  is the latest installed
 :debug:main ncursesw 5.7_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_1 exists in the ports tree
 :debug:main expat 2.0.1_1  is the latest installed
 :debug:main expat 2.0.1_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.5_0 exists in the ports tree
 :debug:main zlib 1.2.5_0  is the latest installed
 :debug:main zlib 1.2.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.8.9_0 exists in the ports tree
 :debug:main perl5 5.8.9_0  is the latest installed
 :debug:main perl5 5.8.9_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.8 5.8.9_3 exists in the ports tree
 :debug:main perl5.8 5.8.9_3  is the latest installed
 :debug:main perl5.8 5.8.9_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 :debug:main Found Dependency: path: /usr/bin filename: python regex:
 ^python$
 :debug:main python_select is *not* installed by MacPorts
 :debug:main Searching for dependency: python_select
 :debug:main Didn't find receipt, going to depspec regex for: python_select
 :debug:main Found Dependency: path: /usr/bin filename: python regex:
 ^python$
 :debug:main python_select not installed, soft dependency satisfied
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main pango 1.28.3_0 exists in the ports tree
 :debug:main pango 1.28.3_0  is the latest installed
 :debug:main pango 1.28.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main No need to upgrade! pango 1.28.3_0 >= pango 1.28.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main Xft2 2.2.0_0 exists in the ports tree
 :debug:main Xft2 2.2.0_0  is the latest installed
 :debug:main Xft2 2.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xrender 0.9.6_0 exists in the ports tree
 :debug:main xrender 0.9.6_0  is the latest installed
 :debug:main xrender 0.9.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libX11 1.4.0_1 exists in the ports tree
 :debug:main xorg-libX11 1.4.0_1  is the latest installed
 :debug:main xorg-libX11 1.4.0_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libX11 1.4.0_1 >= xorg-libX11 1.4.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
 :debug:main xorg-libXdmcp 1.1.0_0  is the latest installed
 :debug:main xorg-libXdmcp 1.1.0_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp
 1.1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree
 :debug:main xorg-libXau 1.0.6_0  is the latest installed
 :debug:main xorg-libXau 1.0.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xproto 7.0.20_0 exists in the ports tree
 :debug:main xorg-xproto 7.0.20_0  is the latest installed
 :debug:main xorg-xproto 7.0.20_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xproto 7.0.20_0 >= xorg-xproto
 7.0.20_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libxcb 1.7_0 exists in the ports tree
 :debug:main xorg-libxcb 1.7_0 +python26 is the latest installed
 :debug:main xorg-libxcb 1.7_0 +python26 is active
 :debug:main Merging existing variants '+python26' into variants
 :debug:main new fully merged portvariants: python26 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libxcb
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant python26 provides python26
 :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
 :debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed
 :debug:main xorg-xcb-proto 1.6_0 +python26 is active
 :debug:main Merging existing variants '+python26' into variants
 :debug:main new fully merged portvariants: python26 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-proto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Executing variant python26 provides python26
 :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto
 1.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxml2 2.7.8_0 exists in the ports tree
 :debug:main libxml2 2.7.8_0  is the latest installed
 :debug:main libxml2 2.7.8_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python26 2.6.6_0 exists in the ports tree
 :debug:main python26 2.6.6_0 +no_tkinter is the latest installed
 :debug:main python26 2.6.6_0 +no_tkinter is active
 :debug:main Merging existing variants '+no_tkinter' into variants
 :debug:main new fully merged portvariants: no_tkinter +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant no_tkinter provides no_tkinter
 :debug:main No need to upgrade! python26 2.6.6_0 >= python26 2.6.6_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.0c_0 exists in the ports tree
 :debug:main openssl 1.0.0c_0  is the latest installed
 :debug:main openssl 1.0.0c_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! openssl 1.0.0c_0 >= openssl 1.0.0c_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.7.3_0 exists in the ports tree
 :debug:main sqlite3 3.7.3_0  is the latest installed
 :debug:main sqlite3 3.7.3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! sqlite3 3.7.3_0 >= sqlite3 3.7.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main readline 6.1.002_0 exists in the ports tree
 :debug:main readline 6.1.002_0  is the latest installed
 :debug:main readline 6.1.002_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! readline 6.1.002_0 >= readline 6.1.002_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db46 4.6.21_6 exists in the ports tree
 :debug:main db46 4.6.21_6  is the latest installed
 :debug:main db46 4.6.21_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.8.3_2 exists in the ports tree
 :debug:main gdbm 1.8.3_2  is the latest installed
 :debug:main gdbm 1.8.3_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0  is the latest installed
 :debug:main bzip2 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
 :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
 :debug:main xorg-libpthread-stubs 0.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libpthread-stubs
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
 libpthread-stubs 0.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
 :debug:main xorg-kbproto 1.0.5_0  is the latest installed
 :debug:main xorg-kbproto 1.0.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto
 1.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
 :debug:main xorg-renderproto 0.11.1_0  is the latest installed
 :debug:main xorg-renderproto 0.11.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-
 renderproto 0.11.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main freetype 2.4.4_0 exists in the ports tree
 :debug:main freetype 2.4.4_0  is the latest installed
 :debug:main freetype 2.4.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! freetype 2.4.4_0 >= freetype 2.4.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fontconfig 2.8.0_0 exists in the ports tree
 :debug:main fontconfig 2.8.0_0 +macosx is the latest installed
 :debug:main fontconfig 2.8.0_0 +macosx is active
 :debug:main Merging existing variants '+macosx' into variants
 :debug:main new fully merged portvariants: macosx +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Requested variant macosx is not provided by port fontconfig.
 :debug:main Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig
 2.8.0_0, even though installed variants "+macosx" do not match "".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cairo 1.10.0_1 exists in the ports tree
 :debug:main cairo 1.10.0_1  is the latest installed
 :debug:main cairo 1.10.0_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! cairo 1.10.0_1 >= cairo 1.10.0_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpixman 0.20.0_0 exists in the ports tree
 :debug:main libpixman 0.20.0_0  is the latest installed
 :debug:main libpixman 0.20.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libpixman 0.20.0_0 >= libpixman 0.20.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpng 1.2.44_0 exists in the ports tree
 :debug:main libpng 1.2.44_0  is the latest installed
 :debug:main libpng 1.2.44_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdk-pixbuf2 2.22.1_0 exists in the ports tree
 :debug:main gdk-pixbuf2 2.22.1_0  is the latest installed
 :debug:main gdk-pixbuf2 2.22.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics
 /gdk-pixbuf2
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gdk-pixbuf2 2.22.1_0 >= gdk-pixbuf2
 2.22.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jasper 1.900.1_7 exists in the ports tree
 :debug:main jasper 1.900.1_7  is the latest installed
 :debug:main jasper 1.900.1_7  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main jpeg 8b_0 exists in the ports tree
 :debug:main jpeg 8b_0  is the latest installed
 :debug:main jpeg 8b_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main tiff 3.9.4_0 exists in the ports tree
 :debug:main tiff 3.9.4_0  is the latest installed
 :debug:main tiff 3.9.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXi 1.4.0_0 exists in the ports tree
 :debug:main xorg-libXi 1.4.0_0  is the latest installed
 :debug:main xorg-libXi 1.4.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXi 1.4.0_0 >= xorg-libXi 1.4.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXext 1.2.0_0 exists in the ports tree
 :debug:main xorg-libXext 1.2.0_0  is the latest installed
 :debug:main xorg-libXext 1.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXext 1.2.0_0 >= xorg-libXext
 1.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xextproto 7.1.2_0 exists in the ports tree
 :debug:main xorg-xextproto 7.1.2_0  is the latest installed
 :debug:main xorg-xextproto 7.1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto
 7.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-inputproto 2.0.1_0 exists in the ports tree
 :debug:main xorg-inputproto 2.0.1_0  is the latest installed
 :debug:main xorg-inputproto 2.0.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-inputproto 2.0.1_0 >= xorg-inputproto
 2.0.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXrandr 1.3.1_0 exists in the ports tree
 :debug:main xorg-libXrandr 1.3.1_0  is the latest installed
 :debug:main xorg-libXrandr 1.3.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXrandr
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXrandr 1.3.1_0 >= xorg-libXrandr
 1.3.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-randrproto 1.3.2_0 exists in the ports tree
 :debug:main xorg-randrproto 1.3.2_0  is the latest installed
 :debug:main xorg-randrproto 1.3.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 randrproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto
 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcursor 1.1.11_0 exists in the ports tree
 :debug:main xorg-libXcursor 1.1.11_0  is the latest installed
 :debug:main xorg-libXcursor 1.1.11_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcursor
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXcursor 1.1.11_0 >= xorg-
 libXcursor 1.1.11_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXfixes 4.0.5_0 exists in the ports tree
 :debug:main xorg-libXfixes 4.0.5_0  is the latest installed
 :debug:main xorg-libXfixes 4.0.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXfixes
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXfixes 4.0.5_0 >= xorg-libXfixes
 4.0.5_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-fixesproto 4.1.2_0 exists in the ports tree
 :debug:main xorg-fixesproto 4.1.2_0  is the latest installed
 :debug:main xorg-fixesproto 4.1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 fixesproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-fixesproto 4.1.2_0 >= xorg-fixesproto
 4.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree
 :debug:main xorg-libXinerama 1.1.1_0  is the latest installed
 :debug:main xorg-libXinerama 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXinerama
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-
 libXinerama 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xineramaproto 1.2_0 exists in the ports tree
 :debug:main xorg-xineramaproto 1.2_0  is the latest installed
 :debug:main xorg-xineramaproto 1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xineramaproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-
 xineramaproto 1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
 :debug:main xorg-libXdamage 1.1.3_0  is the latest installed
 :debug:main xorg-libXdamage 1.1.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdamage
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage
 1.1.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
 :debug:main xorg-damageproto 1.2.1_0  is the latest installed
 :debug:main xorg-damageproto 1.2.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 damageproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-
 damageproto 1.2.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
 :debug:main xorg-libXcomposite 0.4.3_0  is the latest installed
 :debug:main xorg-libXcomposite 0.4.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXcomposite
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-
 libXcomposite 0.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
 :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
 :debug:main xorg-compositeproto 0.4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 compositeproto
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-
 compositeproto 0.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main shared-mime-info 0.90_0 exists in the ports tree
 :debug:main shared-mime-info 0.90_0  is the latest installed
 :debug:main shared-mime-info 0.90_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /shared-mime-info
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! shared-mime-info 0.90_0 >= shared-mime-
 info 0.90_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus-glib 0.92_0 exists in the ports tree
 :debug:main dbus-glib 0.92_0  is the latest installed
 :debug:main dbus-glib 0.92_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /dbus-glib
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! dbus-glib 0.92_0 >= dbus-glib 0.92_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main dbus 1.2.24_1 exists in the ports tree
 :debug:main dbus 1.2.24_1  is the latest installed
 :debug:main dbus 1.2.24_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! dbus 1.2.24_1 >= dbus 1.2.24_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main policykit 0.96_0 exists in the ports tree
 :debug:main policykit 0.96_0  is the latest installed
 :debug:main policykit 0.96_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/policykit
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! policykit 0.96_0 >= policykit 0.96_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main eggdbus 0.6_0 exists in the ports tree
 :debug:main eggdbus 0.6_0  is the latest installed
 :debug:main eggdbus 0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/eggdbus
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! eggdbus 0.6_0 >= eggdbus 0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main orbit2 2.14.19_0 exists in the ports tree
 :debug:main orbit2 2.14.19_0  is the latest installed
 :debug:main orbit2 2.14.19_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! orbit2 2.14.19_0 >= orbit2 2.14.19_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libidl 0.8.14_0 exists in the ports tree
 :debug:main libidl 0.8.14_0  is the latest installed
 :debug:main libidl 0.8.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libidl 0.8.14_0 >= libidl 0.8.14_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main webkit-gtk 1.2.5_2 exists in the ports tree
 :debug:main webkit-gtk 1.2.5_2  is the latest installed
 :debug:main webkit-gtk 1.2.5_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/www
 /webkit-gtk
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main No need to upgrade! webkit-gtk 1.2.5_2 >= webkit-gtk 1.2.5_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libsoup 2.30.2_0 exists in the ports tree
 :debug:main libsoup 2.30.2_0  is the latest installed
 :debug:main libsoup 2.30.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libsoup
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libsoup 2.30.2_0 >= libsoup 2.30.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnutls 2.8.6_0 exists in the ports tree
 :debug:main gnutls 2.8.6_0  is the latest installed
 :debug:main gnutls 2.8.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gnutls
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gnutls 2.8.6_0 >= gnutls 2.8.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgcrypt 1.4.6_0 exists in the ports tree
 :debug:main libgcrypt 1.4.6_0  is the latest installed
 :debug:main libgcrypt 1.4.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libgcrypt 1.4.6_0 >= libgcrypt 1.4.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgpg-error 1.10_0 exists in the ports tree
 :debug:main libgpg-error 1.10_0  is the latest installed
 :debug:main libgpg-error 1.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /libgpg-error
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libtasn1 2.8_0 exists in the ports tree
 :debug:main libtasn1 2.8_0  is the latest installed
 :debug:main libtasn1 2.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libtasn1 2.8_0 >= libtasn1 2.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main lzo 1.08_0 exists in the ports tree
 :debug:main lzo 1.08_0  is the latest installed
 :debug:main lzo 1.08_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/lzo
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! lzo 1.08_0 >= lzo 1.08_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main libproxy 0.4.6_0 exists in the ports tree
 :debug:main libproxy 0.4.6_0  is the latest installed
 :debug:main libproxy 0.4.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libproxy
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libproxy 0.4.6_0 >= libproxy 0.4.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libgnome-keyring 2.30.1_1 exists in the ports tree
 :debug:main libgnome-keyring 2.30.1_1  is the latest installed
 :debug:main libgnome-keyring 2.30.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /libgnome-keyring
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libgnome-keyring 2.30.1_1 >= libgnome-
 keyring 2.30.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnome-keyring 2.30.3_1 exists in the ports tree
 :debug:main gnome-keyring 2.30.3_1  is the latest installed
 :debug:main gnome-keyring 2.30.3_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-keyring
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gnome-keyring 2.30.3_1 >= gnome-keyring
 2.30.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main icu 4.6_0 exists in the ports tree
 :debug:main icu 4.6_0  is the latest installed
 :debug:main icu 4.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! icu 4.6_0 >= icu 4.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxslt 1.1.26_0 exists in the ports tree
 :debug:main libxslt 1.1.26_0  is the latest installed
 :debug:main libxslt 1.1.26_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main enchant 1.6.0_0 exists in the ports tree
 :debug:main enchant 1.6.0_0  is the latest installed
 :debug:main enchant 1.6.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! enchant 1.6.0_0 >= enchant 1.6.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main aspell 0.60.6_4 exists in the ports tree
 :debug:main aspell 0.60.6_4 +nonls is the latest installed
 :debug:main aspell 0.60.6_4 +nonls is active
 :debug:main Merging existing variants '+nonls' into variants
 :debug:main new fully merged portvariants: nonls +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main Executing variant nonls provides nonls
 :debug:main No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main texinfo 4.13_2 exists in the ports tree
 :debug:main texinfo 4.13_2  is the latest installed
 :debug:main texinfo 4.13_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main hunspell 1.2.12_0 exists in the ports tree
 :debug:main hunspell 1.2.12_0  is the latest installed
 :debug:main hunspell 1.2.12_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! hunspell 1.2.12_0 >= hunspell 1.2.12_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gst-plugins-base 0.10.31_0 exists in the ports tree
 :debug:main gst-plugins-base 0.10.31_0  is the latest installed
 :debug:main gst-plugins-base 0.10.31_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gst-plugins-base
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main No need to upgrade! gst-plugins-base 0.10.31_0 >= gst-plugins-
 base 0.10.31_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gstreamer 0.10.31_0 exists in the ports tree
 :debug:main gstreamer 0.10.31_0  is the latest installed
 :debug:main gstreamer 0.10.31_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gstreamer
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gstreamer 0.10.31_0 >= gstreamer 0.10.31_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bison 2.4.3_0 exists in the ports tree
 :debug:main bison 2.4.3_0  is the latest installed
 :debug:main bison 2.4.3_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! bison 2.4.3_0 >= bison 2.4.3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main m4 1.4.15_2 exists in the ports tree
 :debug:main m4 1.4.15_2  is the latest installed
 :debug:main m4 1.4.15_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! m4 1.4.15_2 >= m4 1.4.15_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main flex 2.5.35_0 exists in the ports tree
 :debug:main flex 2.5.35_0  is the latest installed
 :debug:main flex 2.5.35_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnome-vfs 2.24.4_0 exists in the ports tree
 :debug:main gnome-vfs 2.24.4_0  is the latest installed
 :debug:main gnome-vfs 2.24.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-vfs
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gnome-vfs 2.24.4_0 >= gnome-vfs 2.24.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main desktop-file-utils 0.15_1 exists in the ports tree
 :debug:main desktop-file-utils 0.15_1  is the latest installed
 :debug:main desktop-file-utils 0.15_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /desktop-file-utils
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! desktop-file-utils 0.15_1 >= desktop-file-
 utils 0.15_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main popt 1.16_0 exists in the ports tree
 :debug:main popt 1.16_0  is the latest installed
 :debug:main popt 1.16_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! popt 1.16_0 >= popt 1.16_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gnome-mime-data 2.18.0_3 exists in the ports tree
 :debug:main gnome-mime-data 2.18.0_3  is the latest installed
 :debug:main gnome-mime-data 2.18.0_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /gnome-mime-data
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-
 data 2.18.0_3
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main libtheora 1.1.1_0 exists in the ports tree
 :debug:main libtheora 1.1.1_0  is the latest installed
 :debug:main libtheora 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libtheora 1.1.1_0 >= libtheora 1.1.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libvorbis 1.3.2_0 exists in the ports tree
 :debug:main libvorbis 1.3.2_0  is the latest installed
 :debug:main libvorbis 1.3.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libvorbis 1.3.2_0 >= libvorbis 1.3.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libogg 1.2.1_1 exists in the ports tree
 :debug:main libogg 1.2.1_1  is the latest installed
 :debug:main libogg 1.2.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libogg 1.2.1_1 >= libogg 1.2.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main orc 0.4.11_1 exists in the ports tree
 :debug:main orc 0.4.11_1  is the latest installed
 :debug:main orc 0.4.11_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orc
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! orc 0.4.11_1 >= orc 0.4.11_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libXt 1.0.9_0 exists in the ports tree
 :debug:main xorg-libXt 1.0.9_0  is the latest installed
 :debug:main xorg-libXt 1.0.9_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXt
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libXt 1.0.9_0 >= xorg-libXt 1.0.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libsm 1.2.0_0 exists in the ports tree
 :debug:main xorg-libsm 1.2.0_0  is the latest installed
 :debug:main xorg-libsm 1.2.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libsm
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-libice 1.0.7_0 exists in the ports tree
 :debug:main xorg-libice 1.0.7_0  is the latest installed
 :debug:main xorg-libice 1.0.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libice
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice 1.0.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main startup-notification 0.10_0 exists in the ports tree
 :debug:main startup-notification 0.10_0  is the latest installed
 :debug:main startup-notification 0.10_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome
 /startup-notification
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! startup-notification 0.10_0 >= startup-
 notification 0.10_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xorg-xcb-util 0.3.6_0 exists in the ports tree
 :debug:main xorg-xcb-util 0.3.6_0  is the latest installed
 :debug:main xorg-xcb-util 0.3.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcb-util
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! xorg-xcb-util 0.3.6_0 >= xorg-xcb-util
 0.3.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libnotify 0.5.2_0 exists in the ports tree
 :debug:main libnotify 0.5.2_0  is the latest installed
 :debug:main libnotify 0.5.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libnotify
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main adding the default universal variant
 :debug:main No need to upgrade! libnotify 0.5.2_0 >= libnotify 0.5.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main nss 3.12.8_0 exists in the ports tree
 :debug:main nss 3.12.8_0  is the latest installed
 :debug:main nss 3.12.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/nss
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main No need to upgrade! nss 3.12.8_0 >= nss 3.12.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main nspr 4.8.6_0 exists in the ports tree
 :debug:main nspr 4.8.6_0  is the latest installed
 :debug:main nspr 4.8.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/nspr
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! nspr 4.8.6_0 >= nspr 4.8.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main iso-codes 3.23_0 exists in the ports tree
 :debug:main iso-codes 3.23_0  is the latest installed
 :debug:main iso-codes 3.23_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /iso-codes
 :debug:main OS darwin/10.5.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! iso-codes 3.23_0 >= iso-codes 3.23_0
 :msg:main --->  Computing dependencies for epiphany-extensions:info:main
 .:debug:main Searching for dependency: epiphany
 :debug:main Found Dependency: receipt exists for epiphany
 :msg:main
 :debug:main Executing org.macports.main (epiphany-extensions)
 :debug:main Skipping completed org.macports.fetch (epiphany-extensions)
 :debug:main Skipping completed org.macports.checksum (epiphany-extensions)
 :debug:main setting option extract.cmd to /usr/bin/bzip2
 :debug:main Skipping completed org.macports.extract (epiphany-extensions)
 :debug:main Skipping completed org.macports.patch (epiphany-extensions)
 :msg:main --->  Configuring epiphany-extensions
 :debug:main Using compiler 'Mac OS X gcc 4.2'
 :debug:configure configure phase started at Sun Dec 19 15:35:17 CET 2010
 :debug:configure Executing org.macports.configure (epiphany-extensions)
 :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch
 x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64'
 LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
 CXX='/usr/bin/g++-4.2'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_gnome_epiphany-extensions/work/.CC_PRINT_OPTIONS'
 F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
 OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c'
 PYTHON='/opt/local/bin/python2.5' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2
 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
 :debug:configure Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_gnome_epiphany-extensions/work/epiphany-
 extensions-2.28.1" && ./configure --prefix=/opt/local --with-distributor-
 name=MacPorts --enable-extensions=all --enable-opensp=no'
 :info:configure configure: WARNING: unrecognized options: --with-
 distributor-name, --enable-extensions
 :info:configure checking for a BSD-compatible install... /usr/bin/install
 -c
 :info:configure checking whether build environment is sane... yes
 :info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d
 :info:configure checking for gawk... no
 :info:configure checking for mawk... no
 :info:configure checking for nawk... no
 :info:configure checking for awk... awk
 :info:configure checking whether make sets $(MAKE)... yes
 :info:configure checking how to create a ustar tar archive... gnutar
 :info:configure checking whether to disable maintainer-specific portions
 of Makefiles... yes
 :info:configure checking build system type... i386-apple-darwin10.5.0
 :info:configure checking host system type... i386-apple-darwin10.5.0
 :info:configure checking for style of include used by make... GNU
 :info:configure checking for gcc... /usr/bin/gcc-4.2
 :info:configure checking for C compiler default output file name... a.out
 :info:configure checking whether the C compiler works... yes
 :info:configure checking whether we are cross compiling... no
 :info:configure checking for suffix of executables...
 :info:configure checking for suffix of object files... o
 :info:configure checking whether we are using the GNU C compiler... yes
 :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
 :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89...
 none needed
 :info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3
 :info:configure checking for a sed that does not truncate output...
 /usr/bin/sed
 :info:configure checking for grep that handles long lines and -e...
 /usr/bin/grep
 :info:configure checking for egrep... /usr/bin/grep -E
 :info:configure checking for fgrep... /usr/bin/grep -F
 :info:configure checking for ld used by /usr/bin/gcc-4.2...
 /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
 :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-
 darwin10/4.2.1/ld) is GNU ld... no
 :info:configure checking for BSD- or MS-compatible name lister (nm)...
 /usr/bin/nm
 :info:configure checking the name lister (/usr/bin/nm) interface... BSD nm
 :info:configure checking whether ln -s works... yes
 :info:configure checking the maximum length of command line arguments...
 196608
 :info:configure checking whether the shell understands some XSI
 constructs... yes
 :info:configure checking whether the shell understands "+="... yes
 :info:configure checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
 option to reload object files... -r
 :info:configure checking for objdump... no
 :info:configure checking how to recognize dependent libraries... pass_all
 :info:configure checking for ar... ar
 :info:configure checking for strip... strip
 :info:configure checking for ranlib... ranlib
 :info:configure checking command to parse /usr/bin/nm output from
 /usr/bin/gcc-4.2 object... ok
 :info:configure checking for dsymutil... dsymutil
 :info:configure checking for nmedit... nmedit
 :info:configure checking for lipo... lipo
 :info:configure checking for otool... otool
 :info:configure checking for otool64... no
 :info:configure checking for -single_module linker flag... yes
 :info:configure checking for -exported_symbols_list linker flag... yes
 :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2
 -E
 :info:configure checking for ANSI C header files... yes
 :info:configure checking for sys/types.h... yes
 :info:configure checking for sys/stat.h... yes
 :info:configure checking for stdlib.h... yes
 :info:configure checking for string.h... yes
 :info:configure checking for memory.h... yes
 :info:configure checking for strings.h... yes
 :info:configure checking for inttypes.h... yes
 :info:configure checking for stdint.h... yes
 :info:configure checking for unistd.h... yes
 :info:configure checking for dlfcn.h... yes
 :info:configure checking for objdir... .libs
 :info:configure checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-
 exceptions... no
 :info:configure checking for /usr/bin/gcc-4.2 option to produce PIC...
 -fno-common -DPIC
 :info:configure checking if /usr/bin/gcc-4.2 PIC flag -fno-common -DPIC
 works... yes
 :info:configure checking if /usr/bin/gcc-4.2 static flag -static works...
 no
 :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes
 :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o...
 (cached) yes
 :info:configure checking whether the /usr/bin/gcc-4.2 linker
 (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
 libraries... yes
 :info:configure checking dynamic linker characteristics... darwin10.5.0
 dyld
 :info:configure checking how to hardcode library paths into programs...
 immediate
 :info:configure checking whether stripping libraries is possible... yes
 :info:configure checking if libtool supports shared libraries... yes
 :info:configure checking whether to build shared libraries... yes
 :info:configure checking whether to build static libraries... no
 :info:configure checking for library containing strerror... none required
 :info:configure checking for gcc... (cached) /usr/bin/gcc-4.2
 :info:configure checking whether we are using the GNU C compiler...
 (cached) yes
 :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... (cached)
 yes
 :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89...
 (cached) none needed
 :info:configure checking dependency style of /usr/bin/gcc-4.2... (cached)
 gcc3
 :info:configure checking whether we are using the GNU C++ compiler... yes
 :info:configure checking whether /usr/bin/g++-4.2 accepts -g... yes
 :info:configure checking dependency style of /usr/bin/g++-4.2... gcc3
 :info:configure checking whether we are using the GNU C++ compiler...
 (cached) yes
 :info:configure checking whether /usr/bin/g++-4.2 accepts -g... (cached)
 yes
 :info:configure checking dependency style of /usr/bin/g++-4.2... (cached)
 gcc3
 :info:configure checking how to run the C++ preprocessor...
 /usr/bin/g++-4.2 -E
 :info:configure checking for ld used by /usr/bin/g++-4.2...
 /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
 :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-
 darwin10/4.2.1/ld) is GNU ld... no
 :info:configure checking whether the /usr/bin/g++-4.2 linker
 (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
 libraries... yes
 :info:configure checking for /usr/bin/g++-4.2 option to produce PIC...
 -fno-common -DPIC
 :info:configure checking if /usr/bin/g++-4.2 PIC flag -fno-common -DPIC
 works... yes
 :info:configure checking if /usr/bin/g++-4.2 static flag -static works...
 no
 :info:configure checking if /usr/bin/g++-4.2 supports -c -o file.o... yes
 :info:configure checking if /usr/bin/g++-4.2 supports -c -o file.o...
 (cached) yes
 :info:configure checking whether the /usr/bin/g++-4.2 linker
 (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
 libraries... yes
 :info:configure checking dynamic linker characteristics... darwin10.5.0
 dyld
 :info:configure checking how to hardcode library paths into programs...
 immediate
 :info:configure checking for ANSI C header files... (cached) yes
 :info:configure checking for a BSD-compatible install... /usr/bin/install
 -c
 :info:configure checking whether make sets $(MAKE)... (cached) yes
 :info:configure checking for glib-genmarshal... /opt/local/bin/glib-
 genmarshal
 :info:configure checking for gconftool-2... /opt/local/bin/gconftool-2
 :info:configure Using config source
 xml:merged:/opt/local/etc/gconf/gconf.xml.defaults for schema installation
 :info:configure Using $(sysconfdir)/gconf/schemas as install directory for
 schema files
 :info:configure checking whether gcc understands -Wno-sign-compare... yes
 :info:configure checking what warning flags to pass to the C compiler...
 -Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wno-sign-
 compare
 :info:configure checking what language compliance flags to pass to the C
 compiler...
 :info:configure checking what warning flags to pass to the C++ compiler...
 -Wall -Wno-unused
 :info:configure checking what language compliance flags to pass to the C++
 compiler...
 :info:configure checking whether NLS is requested... yes
 :info:configure checking for intltool >= 0.35.0... 0.40.6 found
 :info:configure checking for intltool-update... /opt/local/bin/intltool-
 update
 :info:configure checking for intltool-merge... /opt/local/bin/intltool-
 merge
 :info:configure checking for intltool-extract... /opt/local/bin/intltool-
 extract
 :info:configure checking for xgettext... /opt/local/bin/xgettext
 :info:configure checking for msgmerge... /opt/local/bin/msgmerge
 :info:configure checking for msgfmt... /opt/local/bin/msgfmt
 :info:configure checking for gmsgfmt... /opt/local/bin/msgfmt
 :info:configure checking for perl... /opt/local/bin/perl
 :info:configure checking for XML::Parser... ok
 :info:configure checking locale.h usability... yes
 :info:configure checking locale.h presence... yes
 :info:configure checking for locale.h... yes
 :info:configure checking for LC_MESSAGES... yes
 :info:configure checking libintl.h usability... yes
 :info:configure checking libintl.h presence... yes
 :info:configure checking for libintl.h... yes
 :info:configure checking for ngettext in libc... no
 :info:configure checking for bindtextdomain in -lintl... yes
 :info:configure checking for ngettext in -lintl... yes
 :info:configure checking for dgettext in -lintl... yes
 :info:configure checking for bind_textdomain_codeset... yes
 :info:configure checking for msgfmt... (cached) /opt/local/bin/msgfmt
 :info:configure checking for dcgettext... yes
 :info:configure checking if msgfmt accepts -c... yes
 :info:configure checking for gmsgfmt... (cached) /opt/local/bin/msgfmt
 :info:configure checking for xgettext... (cached) /opt/local/bin/xgettext
 :info:configure checking for pkg-config... /opt/local/bin/pkg-config
 :info:configure checking pkg-config is at least version 0.9.0... yes
 :info:configure checking whether epiphany-2.28 is available... no
 :info:configure configure: error: Epiphany API version 2.28 is required
 :info:configure
 :info:configure This API version is used in the 2.28 stable series, and
 :info:configure the preceeding development series. Please ensure you have
 the appropriate
 :info:configure Epiphany version installed.
 :info:configure shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_gnome_epiphany-extensions/work/epiphany-
 extensions-2.28.1" && ./configure --prefix=/opt/local --with-distributor-
 name=MacPorts --enable-extensions=all --enable-opensp=no " returned error
 1
 :error:configure Target org.macports.configure returned: configure
 failure: shell command failed (see log for details)
 :debug:configure Backtrace: configure failure: shell command failed (see
 log for details)
     while executing
 "$procedure $targetname"
 :info:configure Warning: the following items did not execute (for
 epiphany-extensions): org.macports.activate org.macports.configure
 org.macports.build org.macports.destroot org.macports.install
 :notice:configure Log for epiphany-extensions is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_gnome_epiphany-extensions/main.log
 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/27731>
MacPorts <http://www.macports.org/>
Ports system for Mac OS