[MacPorts] #23534: winetricks-20091213_0 installation checksum error

MacPorts noreply at macports.org
Wed Feb 3 07:38:03 PST 2010


#23534: winetricks-20091213_0 installation checksum error
-------------------------------+--------------------------------------------
 Reporter:  drberry@…          |       Owner:  ryandesign@…           
     Type:  defect             |      Status:  new                    
 Priority:  Normal             |   Milestone:                         
Component:  ports              |     Version:  1.8.2                  
 Keywords:                     |        Port:  winetricks             
-------------------------------+--------------------------------------------
Changes (by jmr@…):

  * keywords:  winetricks checksum =>
  * owner:  macports-tickets@… => ryandesign@…


Old description:

> Checksum error when trying to install winetricks with sudo port -vd
> install winetricks. Output below.
>
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/winetricks
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/winetricks
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port winetricks.
> DEBUG: Requested variant i386 is not provided by port winetricks.
> DEBUG: Requested variant macosx is not provided by port winetricks.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xmessage
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xmessage 1.0.3_0 exists in the ports tree
> DEBUG: xmessage 1.0.3_0  is the latest installed
> DEBUG: xmessage 1.0.3_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xmessage
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xmessage.
> DEBUG: Requested variant i386 is not provided by port xmessage.
> DEBUG: Requested variant macosx is not provided by port xmessage.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: pkgconfig 0.23_1 exists in the ports tree
> DEBUG: pkgconfig 0.23_1  is the latest installed
> DEBUG: pkgconfig 0.23_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port pkgconfig.
> DEBUG: Requested variant i386 is not provided by port pkgconfig.
> DEBUG: Requested variant macosx is not provided by port pkgconfig.
> DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXaw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXaw 1.0.7_0 exists in the ports tree
> DEBUG: xorg-libXaw 1.0.7_0  is the latest installed
> DEBUG: xorg-libXaw 1.0.7_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXaw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXaw.
> DEBUG: Requested variant i386 is not provided by port xorg-libXaw.
> DEBUG: Requested variant macosx is not provided by port xorg-libXaw.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libsm
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
> DEBUG: xorg-libsm 1.1.1_0  is the latest installed
> DEBUG: xorg-libsm 1.1.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libsm
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libsm.
> DEBUG: Requested variant i386 is not provided by port xorg-libsm.
> DEBUG: Requested variant macosx is not provided by port xorg-libsm.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xtrans
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
> DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
> DEBUG: xorg-xtrans 1.2.5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xtrans
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
> DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
> DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
> DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libice
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
> DEBUG: xorg-libice 1.0.6_0  is the latest installed
> DEBUG: xorg-libice 1.0.6_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libice
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libice.
> DEBUG: Requested variant i386 is not provided by port xorg-libice.
> DEBUG: Requested variant macosx is not provided by port xorg-libice.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
> DEBUG: xorg-xproto 7.0.16_0  is the latest installed
> DEBUG: xorg-xproto 7.0.16_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xproto.
> DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
> DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
> DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
> DEBUG: xorg-libXext 1.1.1_0  is the latest installed
> DEBUG: xorg-libXext 1.1.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXext.
> DEBUG: Requested variant i386 is not provided by port xorg-libXext.
> DEBUG: Requested variant macosx is not provided by port xorg-libXext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
> DEBUG: xorg-libX11 1.3.3_0  is the latest installed
> DEBUG: xorg-libX11 1.3.3_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libX11.
> DEBUG: Requested variant i386 is not provided by port xorg-libX11.
> DEBUG: Requested variant macosx is not provided by port xorg-libX11.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-util-macros
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree
> DEBUG: xorg-util-macros 1.5.0_0  is the latest installed
> DEBUG: xorg-util-macros 1.5.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-util-macros
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
> DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
> DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
> DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros
> 1.5.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-bigreqsproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
> DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
> DEBUG: xorg-bigreqsproto 1.1.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-bigreqsproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-
> bigreqsproto.
> DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
> DEBUG: Requested variant macosx is not provided by port xorg-
> bigreqsproto.
> DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
> 1.1.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xcmiscproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
> DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
> DEBUG: xorg-xcmiscproto 1.2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xcmiscproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
> DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
> 1.2.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
> DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
> DEBUG: xorg-xextproto 7.1.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
> DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
> DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
> DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
> 7.1.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xf86bigfontproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
> DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
> DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xf86bigfontproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: Requested variant i386 is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: Requested variant macosx is not provided by port xorg-
> xf86bigfontproto.
> DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
> xf86bigfontproto 1.2.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-inputproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
> DEBUG: xorg-inputproto 2.0_0  is the latest installed
> DEBUG: xorg-inputproto 2.0_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-inputproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
> DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
> DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
> DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
> DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
> DEBUG: xorg-libXdmcp 1.0.3_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
> DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
> DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
> DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
> DEBUG: xorg-libXau 1.0.5_0  is the latest installed
> DEBUG: xorg-libXau 1.0.5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXau.
> DEBUG: Requested variant i386 is not provided by port xorg-libXau.
> DEBUG: Requested variant macosx is not provided by port xorg-libXau.
> DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
> DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
> DEBUG: xorg-kbproto 1.0.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
> DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
> DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
> DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
> DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
> DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXmu
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
> DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
> DEBUG: xorg-libXmu 1.0.5_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXmu
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
> DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
> DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXt
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
> DEBUG: xorg-libXt 1.0.7_1  is the latest installed
> DEBUG: xorg-libXt 1.0.7_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXt
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xorg-libXt.
> DEBUG: Requested variant i386 is not provided by port xorg-libXt.
> DEBUG: Requested variant macosx is not provided by port xorg-libXt.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: autoconf 2.65_1 exists in the ports tree
> DEBUG: autoconf 2.65_1  is the latest installed
> DEBUG: autoconf 2.65_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port autoconf.
> DEBUG: Requested variant i386 is not provided by port autoconf.
> DEBUG: Requested variant macosx is not provided by port autoconf.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5 5.8.9_0 exists in the ports tree
> DEBUG: perl5 5.8.9_0  is the latest installed
> DEBUG: perl5 5.8.9_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port perl5.
> DEBUG: Requested variant i386 is not provided by port perl5.
> DEBUG: Requested variant macosx is not provided by port perl5.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: perl5.8 5.8.9_3 exists in the ports tree
> DEBUG: perl5.8 5.8.9_3  is the latest installed
> DEBUG: perl5.8 5.8.9_3  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port perl5.8.
> DEBUG: Requested variant i386 is not provided by port perl5.8.
> DEBUG: Requested variant macosx is not provided by port perl5.8.
> DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
> DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: m4 1.4.13_0 exists in the ports tree
> DEBUG: m4 1.4.13_0  is the latest installed
> DEBUG: m4 1.4.13_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port m4.
> DEBUG: Requested variant i386 is not provided by port m4.
> DEBUG: Requested variant macosx is not provided by port m4.
> DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: help2man 1.37.1_1 exists in the ports tree
> DEBUG: help2man 1.37.1_1  is the latest installed
> DEBUG: help2man 1.37.1_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port help2man.
> DEBUG: Requested variant i386 is not provided by port help2man.
> DEBUG: Requested variant macosx is not provided by port help2man.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
> DEBUG: p5-locale-gettext 1.05_2  is the latest installed
> DEBUG: p5-locale-gettext 1.05_2  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port p5-locale-
> gettext.
> DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
> DEBUG: Requested variant macosx is not provided by port p5-locale-
> gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gettext 0.17_4 exists in the ports tree
> DEBUG: gettext 0.17_4  is the latest installed
> DEBUG: gettext 0.17_4  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gettext.
> DEBUG: Requested variant i386 is not provided by port gettext.
> DEBUG: Requested variant macosx is not provided by port gettext.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libiconv 1.13.1_0 exists in the ports tree
> DEBUG: libiconv 1.13.1_0  is the latest installed
> DEBUG: libiconv 1.13.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port libiconv.
> DEBUG: Requested variant i386 is not provided by port libiconv.
> DEBUG: Requested variant macosx is not provided by port libiconv.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: gperf 3.0.4_0 exists in the ports tree
> DEBUG: gperf 3.0.4_0  is the latest installed
> DEBUG: gperf 3.0.4_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port gperf.
> DEBUG: Requested variant i386 is not provided by port gperf.
> DEBUG: Requested variant macosx is not provided by port gperf.
> DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
> DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncurses 5.7_0 exists in the ports tree
> DEBUG: ncurses 5.7_0  is the latest installed
> DEBUG: ncurses 5.7_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncurses.
> DEBUG: Requested variant i386 is not provided by port ncurses.
> DEBUG: Requested variant macosx is not provided by port ncurses.
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: ncursesw 5.7_0 exists in the ports tree
> DEBUG: ncursesw 5.7_0  is the latest installed
> DEBUG: ncursesw 5.7_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port ncursesw.
> DEBUG: Requested variant i386 is not provided by port ncursesw.
> DEBUG: Requested variant macosx is not provided by port ncursesw.
> DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: expat 2.0.1_0 exists in the ports tree
> DEBUG: expat 2.0.1_0  is the latest installed
> DEBUG: expat 2.0.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port expat.
> DEBUG: Requested variant i386 is not provided by port expat.
> DEBUG: Requested variant macosx is not provided by port expat.
> DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
> DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
> 1.05_2
> DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
> DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: automake 1.11.1_0 exists in the ports tree
> DEBUG: automake 1.11.1_0  is the latest installed
> DEBUG: automake 1.11.1_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port automake.
> DEBUG: Requested variant i386 is not provided by port automake.
> DEBUG: Requested variant macosx is not provided by port automake.
> DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: libtool 2.2.6b_0 exists in the ports tree
> DEBUG: libtool 2.2.6b_0  is the latest installed
> DEBUG: libtool 2.2.6b_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port libtool.
> DEBUG: Requested variant i386 is not provided by port libtool.
> DEBUG: Requested variant macosx is not provided by port libtool.
> DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
> DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
> DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: xpm 3.5.8_0 exists in the ports tree
> DEBUG: xpm 3.5.8_0  is the latest installed
> DEBUG: xpm 3.5.8_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port xpm.
> DEBUG: Requested variant i386 is not provided by port xpm.
> DEBUG: Requested variant macosx is not provided by port xpm.
> DEBUG: No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0
> DEBUG: No need to upgrade! xorg-libXaw 1.0.7_0 >= xorg-libXaw 1.0.7_0
> DEBUG: No need to upgrade! xmessage 1.0.3_0 >= xmessage 1.0.3_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/cabextract
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: cabextract 1.2_0 exists in the ports tree
> DEBUG: cabextract 1.2_0  is the latest installed
> DEBUG: cabextract 1.2_0  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/cabextract
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port cabextract.
> DEBUG: Requested variant i386 is not provided by port cabextract.
> DEBUG: Requested variant macosx is not provided by port cabextract.
> DEBUG: No need to upgrade! cabextract 1.2_0 >= cabextract 1.2_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: epoch: in tree: 1 installed: 1
> DEBUG: openssl 0.9.8l_0 exists in the ports tree
> DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
> DEBUG: openssl 0.9.8l_0 +darwin is active
> DEBUG: Merging existing variants darwin into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant i386 is not provided by port openssl.
> DEBUG: Requested variant macosx is not provided by port openssl.
> DEBUG: Executing variant darwin provides darwin
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: zlib 1.2.3_4 exists in the ports tree
> DEBUG: zlib 1.2.3_4  is the latest installed
> DEBUG: zlib 1.2.3_4  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: adding the default universal variant
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Requested variant darwin is not provided by port zlib.
> DEBUG: Requested variant i386 is not provided by port zlib.
> DEBUG: Requested variant macosx is not provided by port zlib.
> DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
> DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: curl 7.19.7_1 exists in the ports tree
> DEBUG: curl 7.19.7_1 +ssl is the latest installed
> DEBUG: curl 7.19.7_1 +ssl is active
> DEBUG: Merging existing variants ssl into variants
> DEBUG: new fully merged portvariants: ssl +
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> DEBUG: Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> DEBUG: Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> DEBUG: universal variant already exists, so not adding the default one
> DEBUG: Requested variant darwin is not provided by port curl.
> DEBUG: Requested variant i386 is not provided by port curl.
> DEBUG: Requested variant macosx is not provided by port curl.
> DEBUG: Executing variant ssl provides ssl
> DEBUG: Found port in
> file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net
> /curl-ca-bundle
> DEBUG: epoch: in tree: 0 installed: 0
> DEBUG: curl-ca-bundle 7.19.7_1 exists in the ports tree
> DEBUG: curl-ca-bundle 7.19.7_1  is the latest installed
> DEBUG: curl-ca-bundle 7.19.7_1  is active
> DEBUG: Merging existing variants  into variants
> DEBUG: new fully merged portvariants:
> DEBUG: Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net
> /curl-ca-bundle
> DEBUG: OS Platform: darwin
> DEBUG: OS Version: 9.8.0
> DEBUG: Mac OS X Version: 10.5
> DEBUG: System Arch: i386
> DEBUG: setting option os.universal_supported to yes
> DEBUG: org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
> existing procedure. Target override will not be provided
> DEBUG: 'universal_variant no' specified, so not adding the default
> universal variant
> DEBUG: Requested variant darwin is not provided by port curl-ca-bundle.
> DEBUG: Requested variant i386 is not provided by port curl-ca-bundle.
> DEBUG: Requested variant macosx is not provided by port curl-ca-bundle.
> DEBUG: No need to upgrade! curl-ca-bundle 7.19.7_1 >= curl-ca-bundle
> 7.19.7_1
> DEBUG: No need to upgrade! curl 7.19.7_1 >= curl 7.19.7_1
> --->  Computing dependencies for winetricks
> DEBUG: Searching for dependency: xmessage
> DEBUG: Found Dependency: receipt exists for xmessage
> DEBUG: Searching for dependency: wine
> DEBUG: Didn't find receipt, going to depspec regex for: wine
> DEBUG: Found Dependency: path: /opt/local/bin filename: wine regex:
> ^wine$
> DEBUG: Searching for dependency: cabextract
> DEBUG: Found Dependency: receipt exists for cabextract
> DEBUG: Searching for dependency: openssl
> DEBUG: Found Dependency: receipt exists for openssl
> DEBUG: Searching for dependency: curl
> DEBUG: Found Dependency: receipt exists for curl
> DEBUG: Searching for dependency: unzip
> DEBUG: Didn't find receipt, going to depspec regex for: unzip
> DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
> DEBUG: Executing org.macports.main (winetricks)
> DEBUG: Skipping completed org.macports.fetch (winetricks)
> --->  Verifying checksum(s) for winetricks
> DEBUG: Executing org.macports.checksum (winetricks)
> --->  Checksumming winetricks
> Error: Checksum (md5) mismatch for winetricks
> Portfile checksum: winetricks md5 c849459ad55fa0da933696f1132eb85f
> Distfile checksum: winetricks md5 d0d5b3bff0d984ffced28d90522543e2
> Error: Checksum (sha1) mismatch for winetricks
> Portfile checksum: winetricks sha1
> ebb5aed33c68159ef305ed4be252cade9c37a3d9
> Distfile checksum: winetricks sha1
> 2f1c5067c4bf095a15b8e397693ebb6d95c00a24
> Error: Checksum (rmd160) mismatch for winetricks
> Portfile checksum: winetricks rmd160
> b134008c95d1c4fd00cd26c0b948df8f6cb8eaaf
> Distfile checksum: winetricks rmd160
> f7671581dcecb465effa7d91f55bcec310548eab
> The correct checksum line may be:
> checksums           md5     d0d5b3bff0d984ffced28d90522543e2 \
>                     sha1    2f1c5067c4bf095a15b8e397693ebb6d95c00a24 \
>                     rmd160  f7671581dcecb465effa7d91f55bcec310548eab
> Error: Target org.macports.checksum returned: Unable to verify file
> checksums
> DEBUG: Backtrace: Unable to verify file checksums
>     while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for winetricks):
> org.macports.activate org.macports.extract org.macports.checksum
> org.macports.patch org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>

New description:

 Checksum error when trying to install winetricks with sudo port -vd
 install winetricks. Output below.
 {{{
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/winetricks
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/winetricks
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port winetricks.
 DEBUG: Requested variant i386 is not provided by port winetricks.
 DEBUG: Requested variant macosx is not provided by port winetricks.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xmessage
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xmessage 1.0.3_0 exists in the ports tree
 DEBUG: xmessage 1.0.3_0  is the latest installed
 DEBUG: xmessage 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xmessage
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xmessage.
 DEBUG: Requested variant i386 is not provided by port xmessage.
 DEBUG: Requested variant macosx is not provided by port xmessage.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1  is the latest installed
 DEBUG: pkgconfig 0.23_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXaw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXaw 1.0.7_0 exists in the ports tree
 DEBUG: xorg-libXaw 1.0.7_0  is the latest installed
 DEBUG: xorg-libXaw 1.0.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXaw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXaw.
 DEBUG: Requested variant i386 is not provided by port xorg-libXaw.
 DEBUG: Requested variant macosx is not provided by port xorg-libXaw.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libsm
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libsm 1.1.1_0  is the latest installed
 DEBUG: xorg-libsm 1.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libsm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libsm.
 DEBUG: Requested variant i386 is not provided by port xorg-libsm.
 DEBUG: Requested variant macosx is not provided by port xorg-libsm.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libice
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
 DEBUG: xorg-libice 1.0.6_0  is the latest installed
 DEBUG: xorg-libice 1.0.6_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libice
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libice.
 DEBUG: Requested variant i386 is not provided by port xorg-libice.
 DEBUG: Requested variant macosx is not provided by port xorg-libice.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libXext 1.1.1_0  is the latest installed
 DEBUG: xorg-libXext 1.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXext.
 DEBUG: Requested variant i386 is not provided by port xorg-libXext.
 DEBUG: Requested variant macosx is not provided by port xorg-libXext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.3_0  is the latest installed
 DEBUG: xorg-libX11 1.3.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.5.0_0  is the latest installed
 DEBUG: xorg-util-macros 1.5.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros
 1.5.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0  is the latest installed
 DEBUG: xorg-libXau 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
 DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXmu
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
 DEBUG: xorg-libXmu 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXmu
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
 DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
 DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
 DEBUG: xorg-libXt 1.0.7_1  is the latest installed
 DEBUG: xorg-libXt 1.0.7_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXt
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXt.
 DEBUG: Requested variant i386 is not provided by port xorg-libXt.
 DEBUG: Requested variant macosx is not provided by port xorg-libXt.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.65_1 exists in the ports tree
 DEBUG: autoconf 2.65_1  is the latest installed
 DEBUG: autoconf 2.65_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.13_0 exists in the ports tree
 DEBUG: m4 1.4.13_0  is the latest installed
 DEBUG: m4 1.4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.37.1_1 exists in the ports tree
 DEBUG: help2man 1.37.1_1  is the latest installed
 DEBUG: help2man 1.37.1_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_2  is the latest installed
 DEBUG: p5-locale-gettext 1.05_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4  is the latest installed
 DEBUG: gettext 0.17_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13.1_0 exists in the ports tree
 DEBUG: libiconv 1.13.1_0  is the latest installed
 DEBUG: libiconv 1.13.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0  is the latest installed
 DEBUG: ncurses 5.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0  is the latest installed
 DEBUG: ncursesw 5.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
 1.05_2
 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11.1_0 exists in the ports tree
 DEBUG: automake 1.11.1_0  is the latest installed
 DEBUG: automake 1.11.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6b_0 exists in the ports tree
 DEBUG: libtool 2.2.6b_0  is the latest installed
 DEBUG: libtool 2.2.6b_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libtool.
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
 DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
 DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xpm 3.5.8_0 exists in the ports tree
 DEBUG: xpm 3.5.8_0  is the latest installed
 DEBUG: xpm 3.5.8_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xpm.
 DEBUG: Requested variant i386 is not provided by port xpm.
 DEBUG: Requested variant macosx is not provided by port xpm.
 DEBUG: No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0
 DEBUG: No need to upgrade! xorg-libXaw 1.0.7_0 >= xorg-libXaw 1.0.7_0
 DEBUG: No need to upgrade! xmessage 1.0.3_0 >= xmessage 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/cabextract
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: cabextract 1.2_0 exists in the ports tree
 DEBUG: cabextract 1.2_0  is the latest installed
 DEBUG: cabextract 1.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/cabextract
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port cabextract.
 DEBUG: Requested variant i386 is not provided by port cabextract.
 DEBUG: Requested variant macosx is not provided by port cabextract.
 DEBUG: No need to upgrade! cabextract 1.2_0 >= cabextract 1.2_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: openssl 0.9.8l_0 exists in the ports tree
 DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
 DEBUG: openssl 0.9.8l_0 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port openssl.
 DEBUG: Requested variant macosx is not provided by port openssl.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.3_4 exists in the ports tree
 DEBUG: zlib 1.2.3_4  is the latest installed
 DEBUG: zlib 1.2.3_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant i386 is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
 DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: curl 7.19.7_1 exists in the ports tree
 DEBUG: curl 7.19.7_1 +ssl is the latest installed
 DEBUG: curl 7.19.7_1 +ssl is active
 DEBUG: Merging existing variants ssl into variants
 DEBUG: new fully merged portvariants: ssl +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port curl.
 DEBUG: Requested variant i386 is not provided by port curl.
 DEBUG: Requested variant macosx is not provided by port curl.
 DEBUG: Executing variant ssl provides ssl
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net
 /curl-ca-bundle
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: curl-ca-bundle 7.19.7_1 exists in the ports tree
 DEBUG: curl-ca-bundle 7.19.7_1  is the latest installed
 DEBUG: curl-ca-bundle 7.19.7_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-
 ca-bundle
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port curl-ca-bundle.
 DEBUG: Requested variant i386 is not provided by port curl-ca-bundle.
 DEBUG: Requested variant macosx is not provided by port curl-ca-bundle.
 DEBUG: No need to upgrade! curl-ca-bundle 7.19.7_1 >= curl-ca-bundle
 7.19.7_1
 DEBUG: No need to upgrade! curl 7.19.7_1 >= curl 7.19.7_1
 --->  Computing dependencies for winetricks
 DEBUG: Searching for dependency: xmessage
 DEBUG: Found Dependency: receipt exists for xmessage
 DEBUG: Searching for dependency: wine
 DEBUG: Didn't find receipt, going to depspec regex for: wine
 DEBUG: Found Dependency: path: /opt/local/bin filename: wine regex: ^wine$
 DEBUG: Searching for dependency: cabextract
 DEBUG: Found Dependency: receipt exists for cabextract
 DEBUG: Searching for dependency: openssl
 DEBUG: Found Dependency: receipt exists for openssl
 DEBUG: Searching for dependency: curl
 DEBUG: Found Dependency: receipt exists for curl
 DEBUG: Searching for dependency: unzip
 DEBUG: Didn't find receipt, going to depspec regex for: unzip
 DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
 DEBUG: Executing org.macports.main (winetricks)
 DEBUG: Skipping completed org.macports.fetch (winetricks)
 --->  Verifying checksum(s) for winetricks
 DEBUG: Executing org.macports.checksum (winetricks)
 --->  Checksumming winetricks
 Error: Checksum (md5) mismatch for winetricks
 Portfile checksum: winetricks md5 c849459ad55fa0da933696f1132eb85f
 Distfile checksum: winetricks md5 d0d5b3bff0d984ffced28d90522543e2
 Error: Checksum (sha1) mismatch for winetricks
 Portfile checksum: winetricks sha1
 ebb5aed33c68159ef305ed4be252cade9c37a3d9
 Distfile checksum: winetricks sha1
 2f1c5067c4bf095a15b8e397693ebb6d95c00a24
 Error: Checksum (rmd160) mismatch for winetricks
 Portfile checksum: winetricks rmd160
 b134008c95d1c4fd00cd26c0b948df8f6cb8eaaf
 Distfile checksum: winetricks rmd160
 f7671581dcecb465effa7d91f55bcec310548eab
 The correct checksum line may be:
 checksums           md5     d0d5b3bff0d984ffced28d90522543e2 \
                     sha1    2f1c5067c4bf095a15b8e397693ebb6d95c00a24 \
                     rmd160  f7671581dcecb465effa7d91f55bcec310548eab
 Error: Target org.macports.checksum returned: Unable to verify file
 checksums
 DEBUG: Backtrace: Unable to verify file checksums
     while executing
 "$procedure $targetname"
 Warning: the following items did not execute (for winetricks):
 org.macports.activate org.macports.extract org.macports.checksum
 org.macports.patch org.macports.configure org.macports.build
 org.macports.destroot org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>
 }}}

--

Comment:

 Please remember to preview and use WikiFormatting, and cc the maintainer.
 As per the [wiki:FAQ#checksums FAQ], you need to indicate which mirror
 your file was downloaded from.

-- 
Ticket URL: <http://trac.macports.org/ticket/23534#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS


More information about the macports-tickets mailing list