[MacPorts] #23605: faad2 checksum mismatch

[MacPorts]

#23605: faad2 checksum mismatch
------------------------------------+---------------------------------------
 Reporter:  jzuniga@…               |       Owner:  macports-tickets@…                   
     Type:  defect                  |      Status:  new                                  
 Priority:  High                    |   Milestone:                                       
Component:  ports                   |     Version:  1.8.2                                
 Keywords:  faad2 cheksum mismatch  |        Port:                                       
------------------------------------+---------------------------------------
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port faad2.
 DEBUG: Requested variant macosx is not provided by port faad2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6b_0 exists in the ports tree
 DEBUG: libtool 2.2.6b_0  is the latest installed
 DEBUG: libtool 2.2.6b_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libtool.
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11.1_0 exists in the ports tree
 DEBUG: automake 1.11.1_0  is the latest installed
 DEBUG: automake 1.11.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.65_1 exists in the ports tree
 DEBUG: autoconf 2.65_1  is the latest installed
 DEBUG: autoconf 2.65_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.13_0 exists in the ports tree
 DEBUG: m4 1.4.13_0  is the latest installed
 DEBUG: m4 1.4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.37.1_1 exists in the ports tree
 DEBUG: help2man 1.37.1_1  is the latest installed
 DEBUG: help2man 1.37.1_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_2  is the latest installed
 DEBUG: p5-locale-gettext 1.05_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4  is the latest installed
 DEBUG: gettext 0.17_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13.1_0 exists in the ports tree
 DEBUG: libiconv 1.13.1_0  is the latest installed
 DEBUG: libiconv 1.13.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
 1.05_2
 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
 DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
 DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
 --->  Computing dependencies for faad2
 DEBUG: Searching for dependency: libtool
 DEBUG: Found Dependency: receipt exists for libtool
 DEBUG: Searching for dependency: autoconf
 DEBUG: Found Dependency: receipt exists for autoconf
 DEBUG: Searching for dependency: automake
 DEBUG: Found Dependency: receipt exists for automake
 DEBUG: Executing org.macports.main (faad2)
 DEBUG: Skipping completed org.macports.fetch (faad2)
 --->  Verifying checksum(s) for faad2
 DEBUG: Executing org.macports.checksum (faad2)
 --->  Checksumming faad2-2.7.tar.gz
 Error: Checksum (md5) mismatch for faad2-2.7.tar.gz
 Portfile checksum: faad2-2.7.tar.gz md5 ee1b4d67ea2d76ee52c5621bc6dbf61e
 Distfile checksum: faad2-2.7.tar.gz md5 370edc8837944bea2cdd348f6bc8e47f
 Error: Checksum (sha1) mismatch for faad2-2.7.tar.gz
 Portfile checksum: faad2-2.7.tar.gz sha1
 80eaaa5cc576c35dd28863767b795c50cbcc0511
 Distfile checksum: faad2-2.7.tar.gz sha1
 5db6cbf0131af0405ee64e0e4ab135e25089f2b7
 Error: Checksum (rmd160) mismatch for faad2-2.7.tar.gz
 Portfile checksum: faad2-2.7.tar.gz rmd160
 3f0ca461e2953014d5b17edccb3337767d478b8d
 Distfile checksum: faad2-2.7.tar.gz rmd160
 2f1d523473499645c1b4d85e00e24db25c6a4b67
 The correct checksum line may be:
 checksums           md5     370edc8837944bea2cdd348f6bc8e47f \
                     sha1    5db6cbf0131af0405ee64e0e4ab135e25089f2b7 \
                     rmd160  2f1d523473499645c1b4d85e00e24db25c6a4b67
 Error: Target org.macports.checksum returned: Unable to verify file
 checksums
 DEBUG: Backtrace: Unable to verify file checksums
     while executing
 "$procedure $targetname"
 Warning: the following items did not execute (for faad2):
 org.macports.activate org.macports.extract org.macports.checksum
 org.macports.patch org.macports.configure org.macports.build
 org.macports.destroot org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>

-- 
Ticket URL: <http://trac.macports.org/ticket/23605>
MacPorts <http://www.macports.org/>
Ports system for Mac OS