[MacPorts] #23659: libsdl_ttf-framework @2.0.9 fails to build on 10.6 snow leopard
MacPorts
noreply at macports.org
Wed Feb 10 20:43:10 PST 2010
#23659: libsdl_ttf-framework @2.0.9 fails to build on 10.6 snow leopard
--------------------------------------+-------------------------------------
Reporter: katzke@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.2
Keywords: ttf libsdl_ttf framework | Port: libsdl_ttf-framework
--------------------------------------+-------------------------------------
{{{bash-3.2# port -d install libsdl_ttf-framework
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
/libsdl_ttf-framework
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
/libsdl_ttf-framework
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcode-1.0.tcl
DEBUG: Re-registering default for use_configure
DEBUG: Re-registering default for build.cmd
DEBUG: Re-registering default for build.pre_args
DEBUG: Re-registering default for build.target
DEBUG: Re-registering default for destroot.cmd
DEBUG: Re-registering default for destroot.pre_args
DEBUG: Re-registering default for destroot.target
DEBUG: Re-registering default for destroot.destdir
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libsdl_ttf-
framework.
DEBUG: Requested variant i386 is not provided by port libsdl_ttf-
framework.
DEBUG: Requested variant macosx is not provided by port libsdl_ttf-
framework.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
/libsdl-framework
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libsdl-framework 20091002_0 exists in the ports tree
DEBUG: libsdl-framework 20091002_0 is the latest installed
DEBUG: libsdl-framework 20091002_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
/libsdl-framework
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcode-1.0.tcl
DEBUG: Re-registering default for use_configure
DEBUG: Re-registering default for build.cmd
DEBUG: Re-registering default for build.pre_args
DEBUG: Re-registering default for build.target
DEBUG: Re-registering default for destroot.cmd
DEBUG: Re-registering default for destroot.pre_args
DEBUG: Re-registering default for destroot.target
DEBUG: Re-registering default for destroot.destdir
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port libsdl-framework.
DEBUG: Requested variant i386 is not provided by port libsdl-framework.
DEBUG: Requested variant macosx is not provided by port libsdl-framework.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libsdl 1.2.14_8 exists in the ports tree
DEBUG: libsdl 1.2.14_8 is the latest installed
DEBUG: libsdl 1.2.14_8 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libsdl.
DEBUG: Requested variant i386 is not provided by port libsdl.
DEBUG: Requested variant macosx is not provided by port libsdl.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.1.1_0 is the latest installed
DEBUG: xorg-libXext 1.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant i386 is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1 is the latest installed
DEBUG: pkgconfig 0.23_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libX11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
DEBUG: xorg-libX11 1.3.3_0 is the latest installed
DEBUG: xorg-libX11 1.3.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-util-macros
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-util-macros 1.6.0_0 exists in the ports tree
DEBUG: xorg-util-macros 1.6.0_0 is the latest installed
DEBUG: xorg-util-macros 1.6.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: No need to upgrade! xorg-util-macros 1.6.0_0 >= xorg-util-macros
1.6.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xtrans
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
DEBUG: xorg-xtrans 1.2.5_0 is the latest installed
DEBUG: xorg-xtrans 1.2.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-bigreqsproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed
DEBUG: xorg-bigreqsproto 1.1.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
1.1.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xcmiscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed
DEBUG: xorg-xcmiscproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
1.2.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xextproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0 is the latest installed
DEBUG: xorg-xextproto 7.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
7.1.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xf86bigfontproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed
DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-
xf86bigfontproto.
DEBUG: Requested variant i386 is not provided by port xorg-
xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-
xf86bigfontproto.
DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
xf86bigfontproto 1.2.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-inputproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
DEBUG: xorg-inputproto 2.0_0 is the latest installed
DEBUG: xorg-inputproto 2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXdmcp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0 is the latest installed
DEBUG: xorg-xproto 7.0.16_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant i386 is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXau
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0 is the latest installed
DEBUG: xorg-libXau 1.0.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant i386 is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-kbproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.4_0 is the latest installed
DEBUG: xorg-kbproto 1.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-libXrandr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
DEBUG: xorg-libXrandr 1.3.0_1 is the latest installed
DEBUG: xorg-libXrandr 1.3.0_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXrandr
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.5_0 exists in the ports tree
DEBUG: xrender 0.9.5_0 is the latest installed
DEBUG: xrender 0.9.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xrender.
DEBUG: Requested variant i386 is not provided by port xrender.
DEBUG: Requested variant macosx is not provided by port xrender.
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-renderproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0 is the latest installed
DEBUG: xorg-renderproto 0.11_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
renderproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
0.11_0
DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
/xorg-randrproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree
DEBUG: xorg-randrproto 1.3.1_0 is the latest installed
DEBUG: xorg-randrproto 1.3.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
randrproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default
universal variant
DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
DEBUG: Requested variant i386 is not provided by port xorg-randrproto.
DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto
1.3.1_0
DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr
1.3.0_1
DEBUG: No need to upgrade! libsdl 1.2.14_8 >= libsdl 1.2.14_8
DEBUG: No need to upgrade! libsdl-framework 20091002_0 >= libsdl-framework
20091002_0
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.11_1 exists in the ports tree
DEBUG: freetype 2.3.11_1 +macosx is the latest installed
DEBUG: freetype 2.3.11_1 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Requested variant i386 is not provided by port freetype.
DEBUG: Executing variant macosx provides macosx
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_4 exists in the ports tree
DEBUG: zlib 1.2.3_4 is the latest installed
DEBUG: zlib 1.2.3_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1
---> Computing dependencies for libsdl_ttf-framework
DEBUG: Searching for dependency: libsdl-framework
DEBUG: Found Dependency: receipt exists for libsdl-framework
DEBUG: Searching for dependency: freetype
DEBUG: Found Dependency: receipt exists for freetype
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Executing org.macports.main (libsdl_ttf-framework)
DEBUG: Skipping completed org.macports.fetch (libsdl_ttf-framework)
DEBUG: Skipping completed org.macports.checksum (libsdl_ttf-framework)
DEBUG: Skipping completed org.macports.extract (libsdl_ttf-framework)
DEBUG: Skipping completed org.macports.patch (libsdl_ttf-framework)
DEBUG: Skipping completed org.macports.configure (libsdl_ttf-framework)
---> Building libsdl_ttf-framework
DEBUG: Executing org.macports.build (libsdl_ttf-framework)
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_devel_libsdl_ttf-framework/work/SDL_ttf-2.0.9" &&
xcodebuild -project "Xcode/SDL_ttf.xcodeproj" -target "Framework"
-configuration Deployment build OBJROOT=build/ SYMROOT=build/
MACOSX_DEPLOYMENT_TARGET=10.6 ARCHS=x86_64 SDKROOT= ARCHS=i386'
=== BUILD NATIVE TARGET Framework OF PROJECT SDL_ttf WITH CONFIGURATION
Deployment ===
Check dependencies
error: There is no SDK with the name or path
'/Developer/SDKs/MacOSX10.4u.sdk'
[BEROR]error: There is no SDK with the name or path
'/Developer/SDKs/MacOSX10.4u.sdk'
** BUILD FAILED **
Error: Target org.macports.build returned: shell command "cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_devel_libsdl_ttf-framework/work/SDL_ttf-2.0.9" &&
xcodebuild -project "Xcode/SDL_ttf.xcodeproj" -target "Framework"
-configuration Deployment build OBJROOT=build/ SYMROOT=build/
MACOSX_DEPLOYMENT_TARGET=10.6 ARCHS=x86_64 SDKROOT= ARCHS=i386" returned
error 1
DEBUG: Backtrace: shell command "cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_devel_libsdl_ttf-framework/work/SDL_ttf-2.0.9" &&
xcodebuild -project "Xcode/SDL_ttf.xcodeproj" -target "Framework"
-configuration Deployment build OBJROOT=build/ SYMROOT=build/
MACOSX_DEPLOYMENT_TARGET=10.6 ARCHS=x86_64 SDKROOT= ARCHS=i386" returned
error 1
while executing
"$procedure $targetname"
Warning: the following items did not execute (for libsdl_ttf-framework):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>}}}
The 10.4u SDK will not be present on 10.6 systems.
--
Ticket URL: <http://trac.macports.org/ticket/23659>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list