[MacPorts] #21755: yafc 1.1.1 build fails in OS X 10.6 Snow Lopard
MacPorts
noreply at macports.org
Sat Feb 13 09:37:11 PST 2010
#21755: yafc 1.1.1 build fails in OS X 10.6 Snow Lopard
---------------------------------------+------------------------------------
Reporter: ismisunderstood@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.8.1
Keywords: snowleopard | Port: yafc
---------------------------------------+------------------------------------
Comment(by ali.amir30@…):
I'm having similar issues. I edited the corresponding Portfile like levity
suggested above, and it seemed to get a bit further with building things
before hitting another error:
{{{
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/yafc
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/yafc
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port yafc.
DEBUG: Requested variant i386 is not provided by port yafc.
DEBUG: Requested variant macosx is not provided by port yafc.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.1.000_1 exists in the ports tree
DEBUG: readline 6.1.000_1 +darwin is the latest installed
DEBUG: readline 6.1.000_1 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port readline.
DEBUG: Requested variant macosx is not provided by port readline.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.2.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
---> Computing dependencies for yafc
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Executing org.macports.main (yafc)
DEBUG: Skipping completed org.macports.fetch (yafc)
DEBUG: Skipping completed org.macports.checksum (yafc)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (yafc)
DEBUG: Skipping completed org.macports.patch (yafc)
DEBUG: Skipping completed org.macports.configure (yafc)
---> Building yafc
DEBUG: Executing org.macports.build (yafc)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_yafc/work/yafc-1.1.1"
&& /usr/bin/make -j2 all'
/usr/bin/make all-recursive
Making all in doc
make[2]: Nothing to be done for `all'.
Making all in lib
make[2]: Nothing to be done for `all'.
Making all in src
/usr/bin/make all-recursive
Making all in libmhe
make[4]: Nothing to be done for `all'.
Making all in ftp
make[4]: Nothing to be done for `all'.
/bin/sh ../libtool --mode=link --tag=CC /usr/bin/gcc-4.2 -O2 -arch x86_64
-L/opt/local/lib -L/opt/local/lib -o yafc main.o alias.o cmd.o commands.o
completion.o get.o fxp.o gvars.o lglob.o help.o input.o local.o login.o
list.o put.o rm.o tag.o redir.o prompt.o transfer.o rc.o set.o ltag.o
bookmark.o utils.o ftp/libftp.a libmhe/libmhe.a ../lib/libfoo.a
-lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lreadline -lncurses
/usr/bin/gcc-4.2 -O2 -arch x86_64 -o yafc main.o alias.o cmd.o commands.o
completion.o get.o fxp.o gvars.o lglob.o help.o input.o local.o login.o
list.o put.o rm.o tag.o redir.o prompt.o transfer.o rc.o set.o ltag.o
bookmark.o utils.o -L/opt/local/lib ftp/libftp.a libmhe/libmhe.a
../lib/libfoo.a -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lreadline
-lncurses
Undefined symbols:
"_des_read_pw_string", referenced from:
_getpass_hook in input.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[4]: *** [yafc] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_yafc/work/yafc-1.1.1"
&& /usr/bin/make -j2 all " returned error 2
DEBUG: Backtrace: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_yafc/work/yafc-1.1.1"
&& /usr/bin/make -j2 all " returned error 2
while executing
"command_exec build"
(procedure "portbuild::build_main" line 9)
invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for yafc):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
Ticket URL: <http://trac.macports.org/ticket/21755#comment:11>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list