[MacPorts] #23873: mono build fail

MacPorts noreply at macports.org
Sat Feb 27 12:57:32 PST 2010 

#23873: mono build fail
---------------------------------------+------------------------------------
 Reporter:  s.bonczkowski@…            |       Owner:  macports-tickets@…                   
     Type:  defect                     |      Status:  new                                  
 Priority:  Normal                     |   Milestone:                                       
Component:  ports                      |     Version:  1.8.2                                
 Keywords:                             |        Port:                                       
---------------------------------------+------------------------------------
 Steve-Bonczkowskis-MacBook-Pro:~ Steve$ sudo port -d install mono
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mono
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mono
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port mono.
 DEBUG: Requested variant i386 is not provided by port mono.
 DEBUG: Requested variant macosx is not provided by port mono.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4  is the latest installed
 DEBUG: gettext 0.17_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13.1_0 exists in the ports tree
 DEBUG: libiconv 1.13.1_0  is the latest installed
 DEBUG: libiconv 1.13.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: glib2 2.22.4_0 exists in the ports tree
 DEBUG: glib2 2.22.4_0 +darwin is the latest installed
 DEBUG: glib2 2.22.4_0 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port glib2.
 DEBUG: Requested variant macosx is not provided by port glib2.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1  is the latest installed
 DEBUG: pkgconfig 0.23_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.65_1 exists in the ports tree
 DEBUG: autoconf 2.65_1  is the latest installed
 DEBUG: autoconf 2.65_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.13_0 exists in the ports tree
 DEBUG: m4 1.4.13_0  is the latest installed
 DEBUG: m4 1.4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.37.1_1 exists in the ports tree
 DEBUG: help2man 1.37.1_1  is the latest installed
 DEBUG: help2man 1.37.1_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_2  is the latest installed
 DEBUG: p5-locale-gettext 1.05_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
 1.05_2
 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11.1_0 exists in the ports tree
 DEBUG: automake 1.11.1_0  is the latest installed
 DEBUG: automake 1.11.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6b_0 exists in the ports tree
 DEBUG: libtool 2.2.6b_0  is the latest installed
 DEBUG: libtool 2.2.6b_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libtool.
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: python_select 0.3_0 exists in the ports tree
 DEBUG: python_select 0.3_0 +darwin_10 is the latest installed
 DEBUG: python_select 0.3_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port python_select.
 DEBUG: Requested variant i386 is not provided by port python_select.
 DEBUG: Requested variant macosx is not provided by port python_select.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! python_select 0.3_0 >= python_select 0.3_0
 DEBUG: No need to upgrade! glib2 2.22.4_0 >= glib2 2.22.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: icu 4.3.4_0 exists in the ports tree
 DEBUG: icu 4.3.4_0  is the latest installed
 DEBUG: icu 4.3.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port icu.
 DEBUG: Requested variant i386 is not provided by port icu.
 DEBUG: Requested variant macosx is not provided by port icu.
 DEBUG: No need to upgrade! icu 4.3.4_0 >= icu 4.3.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.3_4 exists in the ports tree
 DEBUG: zlib 1.2.3_4  is the latest installed
 DEBUG: zlib 1.2.3_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant i386 is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgdiplus
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libgdiplus 2.6_0 exists in the ports tree
 DEBUG: libgdiplus 2.6_0 +darwin_10 is the latest installed
 DEBUG: libgdiplus 2.6_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgdiplus
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port libgdiplus.
 DEBUG: Requested variant i386 is not provided by port libgdiplus.
 DEBUG: Requested variant macosx is not provided by port libgdiplus.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jpeg 7_0 exists in the ports tree
 DEBUG: jpeg 7_0  is the latest installed
 DEBUG: jpeg 7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port jpeg.
 DEBUG: Requested variant i386 is not provided by port jpeg.
 DEBUG: Requested variant macosx is not provided by port jpeg.
 DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tiff 3.9.2_2 exists in the ports tree
 DEBUG: tiff 3.9.2_2 +macosx is the latest installed
 DEBUG: tiff 3.9.2_2 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port tiff.
 DEBUG: Requested variant i386 is not provided by port tiff.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: giflib 4.1.6_1 exists in the ports tree
 DEBUG: giflib 4.1.6_1  is the latest installed
 DEBUG: giflib 4.1.6_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port giflib.
 DEBUG: Requested variant i386 is not provided by port giflib.
 DEBUG: Requested variant macosx is not provided by port giflib.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libsm
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libsm 1.1.1_0  is the latest installed
 DEBUG: xorg-libsm 1.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libsm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libsm.
 DEBUG: Requested variant i386 is not provided by port xorg-libsm.
 DEBUG: Requested variant macosx is not provided by port xorg-libsm.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libice
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
 DEBUG: xorg-libice 1.0.6_0  is the latest installed
 DEBUG: xorg-libice 1.0.6_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libice
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libice.
 DEBUG: Requested variant i386 is not provided by port xorg-libice.
 DEBUG: Requested variant macosx is not provided by port xorg-libice.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.3_0  is the latest installed
 DEBUG: xorg-libX11 1.3.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.6.0_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.6.0_0  is the latest installed
 DEBUG: xorg-util-macros 1.6.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.6.0_0 >= xorg-util-macros
 1.6.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0  is the latest installed
 DEBUG: xorg-libXau 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
 DEBUG: No need to upgrade! giflib 4.1.6_1 >= giflib 4.1.6_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpng 1.2.42_0 exists in the ports tree
 DEBUG: libpng 1.2.42_0  is the latest installed
 DEBUG: libpng 1.2.42_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libpng.
 DEBUG: Requested variant i386 is not provided by port libpng.
 DEBUG: Requested variant macosx is not provided by port libpng.
 DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fontconfig 2.8.0_0 exists in the ports tree
 DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
 DEBUG: fontconfig 2.8.0_0 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port fontconfig.
 DEBUG: Requested variant i386 is not provided by port fontconfig.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freetype 2.3.12_0 exists in the ports tree
 DEBUG: freetype 2.3.12_0 +macosx is the latest installed
 DEBUG: freetype 2.3.12_0 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port freetype.
 DEBUG: Requested variant i386 is not provided by port freetype.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0
 DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libexif 0.6.17_0 exists in the ports tree
 DEBUG: libexif 0.6.17_0  is the latest installed
 DEBUG: libexif 0.6.17_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libexif
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libexif.
 DEBUG: Requested variant i386 is not provided by port libexif.
 DEBUG: Requested variant macosx is not provided by port libexif.
 DEBUG: No need to upgrade! libexif 0.6.17_0 >= libexif 0.6.17_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.5_0 exists in the ports tree
 DEBUG: xrender 0.9.5_0  is the latest installed
 DEBUG: xrender 0.9.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xrender.
 DEBUG: Requested variant i386 is not provided by port xrender.
 DEBUG: Requested variant macosx is not provided by port xrender.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-renderproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
 DEBUG: xorg-renderproto 0.11_0  is the latest installed
 DEBUG: xorg-renderproto 0.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
 DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
 DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
 DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
 0.11_0
 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
 DEBUG: No need to upgrade! libgdiplus 2.6_0 >= libgdiplus 2.6_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gawk 3.1.7_0 exists in the ports tree
 DEBUG: gawk 3.1.7_0  is the latest installed
 DEBUG: gawk 3.1.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port gawk.
 DEBUG: Requested variant i386 is not provided by port gawk.
 DEBUG: Requested variant macosx is not provided by port gawk.
 DEBUG: No need to upgrade! gawk 3.1.7_0 >= gawk 3.1.7_0
 --->  Computing dependencies for mono
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: glib2
 DEBUG: Found Dependency: receipt exists for glib2
 DEBUG: Searching for dependency: icu
 DEBUG: Found Dependency: receipt exists for icu
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: zlib
 DEBUG: Found Dependency: receipt exists for zlib
 DEBUG: Searching for dependency: libgdiplus
 DEBUG: Found Dependency: receipt exists for libgdiplus
 DEBUG: Searching for dependency: xorg-libX11
 DEBUG: Found Dependency: receipt exists for xorg-libX11
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: gawk
 DEBUG: Found Dependency: receipt exists for gawk
 DEBUG: Executing org.macports.main (mono)
 DEBUG: Skipping completed org.macports.fetch (mono)
 DEBUG: Skipping completed org.macports.checksum (mono)
 DEBUG: setting option extract.cmd to /usr/bin/bzip2
 DEBUG: Skipping completed org.macports.extract (mono)
 DEBUG: Skipping completed org.macports.patch (mono)
 DEBUG: Skipping completed org.macports.configure (mono)
 --->  Building mono
 DEBUG: Executing org.macports.build (mono)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3"
 && /usr/bin/make -j2 all'
 /usr/bin/make  all-recursive
 Making all in po
 Making all in mcs
 make[3]: Nothing to be done for `all-am'.
 Making all in libgc
 Making all in include
 Making all in private
 make[4]: Nothing to be done for `all'.
 make[4]: Nothing to be done for `all-am'.
 Making all in doc
 make[3]: Nothing to be done for `all'.
 /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.2
 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3/libgc/include
 -DPACKAGE_NAME=\"libgc-mono\" -DPACKAGE_TARNAME=\"libgc-mono\"
 -DPACKAGE_VERSION=\"6.6\" -DPACKAGE_STRING=\"libgc-mono\ 6.6\"
 -DPACKAGE_BUGREPORT=\"Hans_Boehm at hp.com\" -DGC_DARWIN_THREADS=1
 -DTHREAD_LOCAL_ALLOC=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1
 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1
 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1
 -DHAVE_DLFCN_H=1 -DSILENT=1 -DNO_SIGNALS=1 -DNO_EXECUTE_PERMISSION=1
 -DJAVA_FINALIZATION=1 -DGC_GCJ_SUPPORT=1 -DATOMIC_UNCOLLECTABLE=1
 -D_IN_LIBGC=1 -I./.. -I./.. -I./include  -I/opt/local/include -no-cpp-
 precomp -D_THREAD_SAFE -DGC_MACOSX_THREADS -DPLATFORM_MACOSX -DUSE_MMAP
 -DUSE_MUNMAP -DGetCurrentProcess=MonoGetCurrentProcess
 -DGetCurrentThread=MonoGetCurrentThread -DCreateEvent=MonoCreateEvent
 -O2 -arch x86_64 -g   -MT allchblk.lo -MD -MP -MF .deps/allchblk.Tpo -c -o
 allchblk.lo allchblk.c
 /bin/sh ./libtool --mode=compile /usr/bin/gcc-4.2
 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3/libgc/include
 -DPACKAGE_NAME=\"libgc-mono\" -DPACKAGE_TARNAME=\"libgc-mono\"
 -DPACKAGE_VERSION=\"6.6\" -DPACKAGE_STRING=\"libgc-mono\ 6.6\"
 -DPACKAGE_BUGREPORT=\"Hans_Boehm at hp.com\" -DGC_DARWIN_THREADS=1
 -DTHREAD_LOCAL_ALLOC=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1
 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1
 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1
 -DHAVE_DLFCN_H=1 -DSILENT=1 -DNO_SIGNALS=1 -DNO_EXECUTE_PERMISSION=1
 -DJAVA_FINALIZATION=1 -DGC_GCJ_SUPPORT=1 -DATOMIC_UNCOLLECTABLE=1
 -D_IN_LIBGC=1 -I./.. -I./.. -I./include  -I/opt/local/include -no-cpp-
 precomp -D_THREAD_SAFE -DGC_MACOSX_THREADS -DPLATFORM_MACOSX -DUSE_MMAP
 -DUSE_MUNMAP -DGetCurrentProcess=MonoGetCurrentProcess
 -DGetCurrentThread=MonoGetCurrentThread -DCreateEvent=MonoCreateEvent
 -O2 -arch x86_64 -g   -MT alloc.lo -MD -MP -MF .deps/alloc.Tpo -c -o
 alloc.lo alloc.c
  /usr/bin/gcc-4.2
 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3/libgc/include
 -DPACKAGE_NAME=\"libgc-mono\" -DPACKAGE_TARNAME=\"libgc-mono\"
 -DPACKAGE_VERSION=\"6.6\" "-DPACKAGE_STRING=\"libgc-mono 6.6\""
 -DPACKAGE_BUGREPORT=\"Hans_Boehm at hp.com\" -DGC_DARWIN_THREADS=1
 -DTHREAD_LOCAL_ALLOC=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1
 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1
 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1
 -DHAVE_DLFCN_H=1 -DSILENT=1 -DNO_SIGNALS=1 -DNO_EXECUTE_PERMISSION=1
 -DJAVA_FINALIZATION=1 -DGC_GCJ_SUPPORT=1 -DATOMIC_UNCOLLECTABLE=1
 -D_IN_LIBGC=1 -I./.. -I./.. -I./include -I/opt/local/include -no-cpp-
 precomp -D_THREAD_SAFE -DGC_MACOSX_THREADS -DPLATFORM_MACOSX -DUSE_MMAP
 -DUSE_MUNMAP -DGetCurrentProcess=MonoGetCurrentProcess
 -DGetCurrentThread=MonoGetCurrentThread -DCreateEvent=MonoCreateEvent -O2
 -arch x86_64 -g -MT allchblk.lo -MD -MP -MF .deps/allchblk.Tpo -c
 allchblk.c  -fno-common -DPIC -o .libs/allchblk.o
  /usr/bin/gcc-4.2
 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3/libgc/include
 -DPACKAGE_NAME=\"libgc-mono\" -DPACKAGE_TARNAME=\"libgc-mono\"
 -DPACKAGE_VERSION=\"6.6\" "-DPACKAGE_STRING=\"libgc-mono 6.6\""
 -DPACKAGE_BUGREPORT=\"Hans_Boehm at hp.com\" -DGC_DARWIN_THREADS=1
 -DTHREAD_LOCAL_ALLOC=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1
 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1
 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1
 -DHAVE_DLFCN_H=1 -DSILENT=1 -DNO_SIGNALS=1 -DNO_EXECUTE_PERMISSION=1
 -DJAVA_FINALIZATION=1 -DGC_GCJ_SUPPORT=1 -DATOMIC_UNCOLLECTABLE=1
 -D_IN_LIBGC=1 -I./.. -I./.. -I./include -I/opt/local/include -no-cpp-
 precomp -D_THREAD_SAFE -DGC_MACOSX_THREADS -DPLATFORM_MACOSX -DUSE_MMAP
 -DUSE_MUNMAP -DGetCurrentProcess=MonoGetCurrentProcess
 -DGetCurrentThread=MonoGetCurrentThread -DCreateEvent=MonoCreateEvent -O2
 -arch x86_64 -g -MT alloc.lo -MD -MP -MF .deps/alloc.Tpo -c alloc.c  -fno-
 common -DPIC -o .libs/alloc.o
 In file included from
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3/libgc/include/private/gc_priv.h:66,
                  from allchblk.c:19:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3/libgc/include/private/gcconfig.h:499:
 error: expected identifier or '(' before '--' token
 In file included from
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3/libgc/include/private/gc_priv.h:66,
                  from alloc.c:19:
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3/libgc/include/private/gcconfig.h:499:
 error: expected identifier or '(' before '--' token
 make[3]: *** [allchblk.lo] Error 1
 make[3]: *** Waiting for unfinished jobs....
 make[3]: *** [alloc.lo] Error 1
 make[2]: *** [all-recursive] Error 1
 make[1]: *** [all-recursive] Error 1
 make: *** [all] Error 2
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3"
 && /usr/bin/make -j2 all " returned error 2
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_mono/work/mono-2.4.2.3"
 && /usr/bin/make -j2 all " returned error 2
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for mono):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>

-- 
Ticket URL: <http://trac.macports.org/ticket/23873>
MacPorts <http://www.macports.org/>
Ports system for Mac OS

More information about the macports-tickets mailing list