[MacPorts] #21755: yafc 1.1.1 build fails in OS X 10.6 Snow Lopard

MacPorts noreply at macports.org
Sun Jan 10 04:07:59 PST 2010 

#21755: yafc 1.1.1 build fails in OS X 10.6 Snow Lopard
---------------------------------------+------------------------------------
 Reporter:  ismisunderstood@…          |       Owner:  macports-tickets@…                   
     Type:  defect                     |      Status:  new                                  
 Priority:  Normal                     |   Milestone:                                       
Component:  ports                      |     Version:  1.8.1                                
 Keywords:  snowleopard                |        Port:  yafc                                 
---------------------------------------+------------------------------------

Comment(by lagrave+bugs+macosforge.org@…):

 I get the same error but some different output:

 {{{
 % sudo port -d install yafc
 Password:
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/yafc
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/yafc
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port yafc.
 DEBUG: Requested variant i386 is not provided by port yafc.
 DEBUG: Requested variant macosx is not provided by port yafc.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: readline 6.1.000_1 exists in the ports tree
 DEBUG: readline 6.1.000_1 +darwin is the latest installed
 DEBUG: readline 6.1.000_1 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant i386 is not provided by port readline.
 DEBUG: Requested variant macosx is not provided by port readline.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
 --->  Computing dependencies for yafc
 DEBUG: Searching for dependency: readline
 DEBUG: Found Dependency: receipt exists for readline
 DEBUG: Executing org.macports.main (yafc)
 DEBUG: Skipping completed org.macports.fetch (yafc)
 DEBUG: Skipping completed org.macports.checksum (yafc)
 DEBUG: setting option extract.cmd to /usr/bin/bzip2
 DEBUG: Skipping completed org.macports.extract (yafc)
 DEBUG: Skipping completed org.macports.patch (yafc)
 DEBUG: Skipping completed org.macports.configure (yafc)
 --->  Building yafc
 DEBUG: Executing org.macports.build (yafc)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_yafc/work/yafc-1.1.1"
 && /usr/bin/make -j2 all'
 /usr/bin/make  all-recursive
 Making all in doc
 make[2]: Nothing to be done for `all'.
 Making all in lib
 if /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I. -I../src
 -I../src/ftp -I../src/libmhe  -I/opt/local/include -I/opt/local/include
 -O2 -arch x86_64 -MT gssapi.o -MD -MP -MF ".deps/gssapi.Tpo" -c -o
 gssapi.o gssapi.c; \
         then mv -f ".deps/gssapi.Tpo" ".deps/gssapi.Po"; else rm -f
 ".deps/gssapi.Tpo"; exit 1; fi
 gssapi.c:44:23: error: krb5_err.h: No such file or directory
 gssapi.c:75: error: static declaration of 'GSS_C_NT_HOSTBASED_SERVICE'
 follows non-static declaration
 /usr/include/gssapi/gssapi.h:400: error: previous declaration of
 'GSS_C_NT_HOSTBASED_SERVICE' was here
 gssapi.c: In function 'gss_auth':
 gssapi.c:288: error: 'KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN' undeclared (first
 use in this function)
 gssapi.c:288: error: (Each undeclared identifier is reported only once
 gssapi.c:288: error: for each function it appears in.)
 make[2]: *** [gssapi.o] Error 1
 make[1]: *** [all-recursive] Error 1
 make: *** [all] Error 2
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_yafc/work/yafc-1.1.1"
 && /usr/bin/make -j2 all " returned error 2
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_yafc/work/yafc-1.1.1"
 && /usr/bin/make -j2 all " returned error 2
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for yafc):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: Status 1 encountered during processing.

 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/21755#comment:9>
MacPorts <http://www.macports.org/>
Ports system for Mac OS

More information about the macports-tickets mailing list