[MacPorts] #23331: MacPort openjdk6 fails to build

Mon Jan 18 12:30:48 PST 2010

#23331: MacPort openjdk6 fails to build
--------------------------------+-------------------------------------------
 Reporter:  conradwt@…          |       Owner:  macports-tickets@…                   
     Type:  defect              |      Status:  new                                  
 Priority:  Normal              |   Milestone:                                       
Component:  ports               |     Version:  1.8.2                                
 Keywords:  ppc                 |        Port:  openjdk6                             
--------------------------------+-------------------------------------------
 {{{
 Last login: Mon Jan 18 12:08:54 on ttys000
 darnoc-desktop:~ conradwt$ sudo port -d install openjdk6
 Password:
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/java/openjdk6
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/java/openjdk6
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant powerpc is not provided by port openjdk6.
 DEBUG: Requested variant darwin is not provided by port openjdk6.
 DEBUG: Requested variant macosx is not provided by port openjdk6.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freetype 2.3.11_1 exists in the ports tree
 DEBUG: freetype 2.3.11_1 +macosx is the latest installed
 DEBUG: freetype 2.3.11_1 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant powerpc is not provided by port freetype.
 DEBUG: Requested variant darwin is not provided by port freetype.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.3_4 exists in the ports tree
 DEBUG: zlib 1.2.3_4  is the latest installed
 DEBUG: zlib 1.2.3_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port zlib.
 DEBUG: Requested variant darwin is not provided by port zlib.
 DEBUG: Requested variant macosx is not provided by port zlib.
 DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
 DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: openmotif 2.3.2_1 exists in the ports tree
 DEBUG: openmotif 2.3.2_1  is the latest installed
 DEBUG: openmotif 2.3.2_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port openmotif.
 DEBUG: Requested variant darwin is not provided by port openmotif.
 DEBUG: Requested variant macosx is not provided by port openmotif.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1  is the latest installed
 DEBUG: pkgconfig 0.23_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port pkgconfig.
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xbitmaps
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xbitmaps 1.1.0_0 exists in the ports tree
 DEBUG: xbitmaps 1.1.0_0  is the latest installed
 DEBUG: xbitmaps 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xbitmaps
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xbitmaps.
 DEBUG: Requested variant darwin is not provided by port xbitmaps.
 DEBUG: Requested variant macosx is not provided by port xbitmaps.
 DEBUG: No need to upgrade! xbitmaps 1.1.0_0 >= xbitmaps 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jpeg 7_0 exists in the ports tree
 DEBUG: jpeg 7_0  is the latest installed
 DEBUG: jpeg 7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port jpeg.
 DEBUG: Requested variant darwin is not provided by port jpeg.
 DEBUG: Requested variant macosx is not provided by port jpeg.
 DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpng 1.2.42_0 exists in the ports tree
 DEBUG: libpng 1.2.42_0  is the latest installed
 DEBUG: libpng 1.2.42_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant powerpc is not provided by port libpng.
 DEBUG: Requested variant darwin is not provided by port libpng.
 DEBUG: Requested variant macosx is not provided by port libpng.
 DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13_0 exists in the ports tree
 DEBUG: libiconv 1.13_0  is the latest installed
 DEBUG: libiconv 1.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant powerpc is not provided by port libiconv.
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant powerpc is not provided by port gperf.
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libsm
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libsm 1.1.1_0  is the latest installed
 DEBUG: xorg-libsm 1.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libsm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libsm.
 DEBUG: Requested variant darwin is not provided by port xorg-libsm.
 DEBUG: Requested variant macosx is not provided by port xorg-libsm.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-xtrans.
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libice
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
 DEBUG: xorg-libice 1.0.6_0  is the latest installed
 DEBUG: xorg-libice 1.0.6_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libice
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libice.
 DEBUG: Requested variant darwin is not provided by port xorg-libice.
 DEBUG: Requested variant macosx is not provided by port xorg-libice.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-xproto.
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
 DEBUG: xorg-libXext 1.1.1_0  is the latest installed
 DEBUG: xorg-libXext 1.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libXext.
 DEBUG: Requested variant darwin is not provided by port xorg-libXext.
 DEBUG: Requested variant macosx is not provided by port xorg-libXext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.2_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.2_0  is the latest installed
 DEBUG: xorg-libX11 1.3.2_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libX11.
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.4.1_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.4.1_0  is the latest installed
 DEBUG: xorg-util-macros 1.4.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-util-macros.
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.4.1_0 >= xorg-util-macros
 1.4.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-
 bigreqsproto.
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-xextproto.
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-inputproto.
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: groff 1.20.1_1 exists in the ports tree
 DEBUG: groff 1.20.1_1  is the latest installed
 DEBUG: groff 1.20.1_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port groff.
 DEBUG: Requested variant darwin is not provided by port groff.
 DEBUG: Requested variant macosx is not provided by port groff.
 DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0  is the latest installed
 DEBUG: xorg-libXau 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libXau.
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-kbproto.
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.2_0 >= xorg-libX11 1.3.2_0
 DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: Xft2 2.1.14_0 exists in the ports tree
 DEBUG: Xft2 2.1.14_0  is the latest installed
 DEBUG: Xft2 2.1.14_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port Xft2.
 DEBUG: Requested variant darwin is not provided by port Xft2.
 DEBUG: Requested variant macosx is not provided by port Xft2.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.5_0 exists in the ports tree
 DEBUG: xrender 0.9.5_0  is the latest installed
 DEBUG: xrender 0.9.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xrender.
 DEBUG: Requested variant darwin is not provided by port xrender.
 DEBUG: Requested variant macosx is not provided by port xrender.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-renderproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
 DEBUG: xorg-renderproto 0.11_0  is the latest installed
 DEBUG: xorg-renderproto 0.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 renderproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-renderproto.
 DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
 DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
 DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto
 0.11_0
 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fontconfig 2.8.0_0 exists in the ports tree
 DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
 DEBUG: fontconfig 2.8.0_0 +macosx is active
 DEBUG: Merging existing variants macosx into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant powerpc is not provided by port fontconfig.
 DEBUG: Requested variant darwin is not provided by port fontconfig.
 DEBUG: Executing variant macosx provides macosx
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port expat.
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
 DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXmu
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
 DEBUG: xorg-libXmu 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXmu
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libXmu.
 DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
 DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXt
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
 DEBUG: xorg-libXt 1.0.7_1  is the latest installed
 DEBUG: xorg-libXt 1.0.7_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXt
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libXt.
 DEBUG: Requested variant darwin is not provided by port xorg-libXt.
 DEBUG: Requested variant macosx is not provided by port xorg-libXt.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.65_0 exists in the ports tree
 DEBUG: autoconf 2.65_0  is the latest installed
 DEBUG: autoconf 2.65_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port autoconf.
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: perl5 is *not* installed by MacPorts
 DEBUG: Searching for dependency: perl5
 DEBUG: Didn't find receipt, going to depspec regex for: perl5
 DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$
 DEBUG: perl5 not installed, soft dependency satisfied
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.13_0 exists in the ports tree
 DEBUG: m4 1.4.13_0  is the latest installed
 DEBUG: m4 1.4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port m4.
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.37.1_1 exists in the ports tree
 DEBUG: help2man 1.37.1_1  is the latest installed
 DEBUG: help2man 1.37.1_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port help2man.
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_2  is the latest installed
 DEBUG: p5-locale-gettext 1.05_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port p5-locale-
 gettext.
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4  is the latest installed
 DEBUG: gettext 0.17_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant powerpc is not provided by port gettext.
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0  is the latest installed
 DEBUG: ncurses 5.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant powerpc is not provided by port ncurses.
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0  is the latest installed
 DEBUG: ncursesw 5.7_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant powerpc is not provided by port ncursesw.
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext
 1.05_2
 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
 DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11.1_0 exists in the ports tree
 DEBUG: automake 1.11.1_0  is the latest installed
 DEBUG: automake 1.11.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port automake.
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6b_0 exists in the ports tree
 DEBUG: libtool 2.2.6b_0  is the latest installed
 DEBUG: libtool 2.2.6b_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port libtool.
 DEBUG: Requested variant darwin is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
 DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
 DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXp 1.0.0_3 exists in the ports tree
 DEBUG: xorg-libXp 1.0.0_3  is the latest installed
 DEBUG: xorg-libXp 1.0.0_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libXp.
 DEBUG: Requested variant darwin is not provided by port xorg-libXp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXp.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libpthread-stubs
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libpthread-stubs 0.3_0 exists in the ports tree
 DEBUG: xorg-libpthread-stubs 0.3_0  is the latest installed
 DEBUG: xorg-libpthread-stubs 0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libpthread-stubs
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-libpthread-
 stubs.
 DEBUG: Requested variant darwin is not provided by port xorg-libpthread-
 stubs.
 DEBUG: Requested variant macosx is not provided by port xorg-libpthread-
 stubs.
 DEBUG: No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-
 stubs 0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-printproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-printproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-printproto 1.0.4_0  is the latest installed
 DEBUG: xorg-printproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 printproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-printproto.
 DEBUG: Requested variant darwin is not provided by port xorg-printproto.
 DEBUG: Requested variant macosx is not provided by port xorg-printproto.
 DEBUG: No need to upgrade! xorg-printproto 1.0.4_0 >= xorg-printproto
 1.0.4_0
 DEBUG: No need to upgrade! xorg-libXp 1.0.0_3 >= xorg-libXp 1.0.0_3
 DEBUG: No need to upgrade! openmotif 2.3.2_1 >= openmotif 2.3.2_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXtst
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXtst 1.1.0_0 exists in the ports tree
 DEBUG: xorg-libXtst 1.1.0_0  is the latest installed
 DEBUG: xorg-libXtst 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXtst
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libXtst.
 DEBUG: Requested variant darwin is not provided by port xorg-libXtst.
 DEBUG: Requested variant macosx is not provided by port xorg-libXtst.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXi
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXi 1.3_0 exists in the ports tree
 DEBUG: xorg-libXi 1.3_0  is the latest installed
 DEBUG: xorg-libXi 1.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXi
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant powerpc is not provided by port xorg-libXi.
 DEBUG: Requested variant darwin is not provided by port xorg-libXi.
 DEBUG: Requested variant macosx is not provided by port xorg-libXi.
 DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-recordproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-recordproto 1.14_0 exists in the ports tree
 DEBUG: xorg-recordproto 1.14_0  is the latest installed
 DEBUG: xorg-recordproto 1.14_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 recordproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port xorg-recordproto.
 DEBUG: Requested variant darwin is not provided by port xorg-recordproto.
 DEBUG: Requested variant macosx is not provided by port xorg-recordproto.
 DEBUG: No need to upgrade! xorg-recordproto 1.14_0 >= xorg-recordproto
 1.14_0
 DEBUG: No need to upgrade! xorg-libXtst 1.1.0_0 >= xorg-libXtst 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/java/icedtea6-plugs
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: icedtea6-plugs 1.6b_0 exists in the ports tree
 DEBUG: icedtea6-plugs 1.6b_0  is the latest installed
 DEBUG: icedtea6-plugs 1.6b_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/java/icedtea6-plugs
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant powerpc is not provided by port icedtea6-plugs.
 DEBUG: Requested variant darwin is not provided by port icedtea6-plugs.
 DEBUG: Requested variant macosx is not provided by port icedtea6-plugs.
 DEBUG: No need to upgrade! icedtea6-plugs 1.6b_0 >= icedtea6-plugs 1.6b_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /apache-ant
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: apache-ant 1.7.1_0 exists in the ports tree
 DEBUG: apache-ant 1.7.1_0 +darwin is the latest installed
 DEBUG: apache-ant 1.7.1_0 +darwin is active
 DEBUG: Merging existing variants darwin into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel
 /apache-ant
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant powerpc is not provided by port apache-ant.
 DEBUG: Requested variant macosx is not provided by port apache-ant.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: No need to upgrade! apache-ant 1.7.1_0 >= apache-ant 1.7.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/java/openjdk6_bootstrap
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: openjdk6_bootstrap b16-r1_0 exists in the ports tree
 DEBUG: openjdk6_bootstrap b16-r1_0  is the latest installed
 DEBUG: openjdk6_bootstrap b16-r1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/java/openjdk6_bootstrap
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 9.8.0
 DEBUG: Mac OS X Version: 10.5
 DEBUG: System Arch: powerpc
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant powerpc is not provided by port
 openjdk6_bootstrap.
 DEBUG: Requested variant darwin is not provided by port
 openjdk6_bootstrap.
 DEBUG: Requested variant macosx is not provided by port
 openjdk6_bootstrap.
 DEBUG: No need to upgrade! openjdk6_bootstrap b16-r1_0 >=
 openjdk6_bootstrap b16-r1_0
 --->  Computing dependencies for openjdk6
 DEBUG: Searching for dependency: freetype
 DEBUG: Found Dependency: receipt exists for freetype
 DEBUG: Searching for dependency: openmotif
 DEBUG: Found Dependency: receipt exists for openmotif
 DEBUG: Searching for dependency: xorg-libX11
 DEBUG: Found Dependency: receipt exists for xorg-libX11
 DEBUG: Searching for dependency: xorg-libXtst
 DEBUG: Found Dependency: receipt exists for xorg-libXtst
 DEBUG: Searching for dependency: icedtea6-plugs
 DEBUG: Found Dependency: receipt exists for icedtea6-plugs
 DEBUG: Searching for dependency: apache-ant
 DEBUG: Found Dependency: receipt exists for apache-ant
 DEBUG: Searching for dependency: openjdk6_bootstrap
 DEBUG: Found Dependency: receipt exists for openjdk6_bootstrap
 DEBUG: Executing org.macports.main (openjdk6)
 DEBUG: Skipping completed org.macports.fetch (openjdk6)
 DEBUG: Skipping completed org.macports.checksum (openjdk6)
 DEBUG: Skipping completed org.macports.extract (openjdk6)
 DEBUG: Skipping completed org.macports.patch (openjdk6)
 DEBUG: Skipping completed org.macports.configure (openjdk6)
 --->  Building openjdk6
 DEBUG: Executing org.macports.build (openjdk6)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/./"
 && /usr/bin/make -j4 all
 ALT_BOOTDIR="/opt/local/share/java/openjdk6_bootstrap"
 ALT_BINARY_PLUGS_PATH="/opt/local/share/java/icedtea6-plugs/jre/lib/rt-
 closed.jar" ANT_HOME="/opt/local/share/java/apache-ant"
 ALT_FREETYPE_HEADERS_PATH="/opt/local/include"
 ALT_FREETYPE_LIB_PATH="/opt/local/lib"
 ALT_CUPS_HEADERS_PATH="/usr/include" ALT_MOTIF_DIR="/opt/local"
 ALT_X11_PATH="/opt/local" ALT_DEVTOOLS_PATH=/usr
 ALT_CACERTS_FILE=/System/Library/Frameworks/JavaVM.framework/Home/lib/security/cacerts
 NO_DOCS=true HOTSPOT_BUILD_JOBS=3'
 jdk/make/common/shared/Defs.gmk:368: "WARNING: Value of PREVIOUS_JDK_FILE
 contains a space: 'jdk-6-bsd-Power Macintosh.tar.gz', check or set
 ALT_PREVIOUS_JDK_FILE"
 jdk/make/common/shared/Defs.gmk:378: "WARNING: Value of PREVIOUS_JRE_FILE
 contains a space: 'jre-6-bsd-Power Macintosh.tar.gz', check or set
 ALT_PREVIOUS_JRE_FILE"
 jdk/make/common/shared/Defs.gmk:405: "WARNING: Value of
 PREVIOUS_RELEASE_PATH contains a space: '/NOT-
 SET/re/jdk/1.6.0/archive/fcs/bundles/bsd-Power Macintosh', check or set
 ALT_PREVIOUS_RELEASE_PATH"
 jdk/make/common/shared/Defs.gmk:455: "WARNING: OUTPUTDIR './build/bsd-
 Power Macintosh' not writable, will use '/tmp/root/jdk-outputdir'"
 /bin/mkdir -p /tmp/root/jdk-outputdir/j2sdk-image
 /bin/mkdir -p /tmp/root/jdk-outputdir/j2sdk-image
 bsd Power Macintosh 1.6.0-internal build started: 10-01-18 12:29
 /bin/mkdir -p /tmp/root/jdk-outputdir-fastdebug/j2sdk-image
 /bin/mkdir -p /tmp/root/jdk-outputdir-fastdebug/j2sdk-image

 Build Machine Information:
    build machine = darnoc-desktop.local
 Hotspot Settings: \n      HOTSPOT_BUILD_JOBS  = 3 \n
 HOTSPOT_OUTPUTDIR   = /tmp/root/jdk-outputdir/hotspot/outputdir \n
 HOTSPOT_EXPORT_PATH = /tmp/root/jdk-outputdir/hotspot/import \n \n
 /bin/mkdir -p /tmp/root/jdk-outputdir/langtools
 (cd  ./langtools/make && \
          /usr/bin/make
 JDK_TOPDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk
 JDK_MAKE_SHARED_DIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared
 EXTERNALSANITYCONTROL=true TARGET_CLASS_VERSION=5 MILESTONE=internal
 BUILD_NUMBER=b00 JDK_BUILD_NUMBER=b00 FULL_VERSION=1.6.0-internal-
 root_18_jan_2010_12_29-b00 PREVIOUS_JDK_VERSION=1.6.0 JDK_VERSION=1.6.0
 JDK_MKTG_VERSION=6 JDK_MAJOR_VERSION=1 JDK_MINOR_VERSION=6
 JDK_MICRO_VERSION=0 ARCH_DATA_MODEL=64 COOKED_BUILD_NUMBER=0
 ANT_HOME="/opt/local/share/java/apache-ant" FINDBUGS_HOME="/NOT-
 SET/devtools/share/findbugs/latest" ALT_OUTPUTDIR=/tmp/root/jdk-
 outputdir/langtools ALT_BOOTDIR=/opt/local/share/java/openjdk6_bootstrap
 all)
 Sanity check passed.
 /bin/mkdir -p /tmp/root/jdk-outputdir/corba
 (cd  ./corba/make && \
          /usr/bin/make
 JDK_TOPDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk
 JDK_MAKE_SHARED_DIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared
 EXTERNALSANITYCONTROL=true TARGET_CLASS_VERSION=5 MILESTONE=internal
 BUILD_NUMBER=b00 JDK_BUILD_NUMBER=b00 FULL_VERSION=1.6.0-internal-
 root_18_jan_2010_12_29-b00 PREVIOUS_JDK_VERSION=1.6.0 JDK_VERSION=1.6.0
 JDK_MKTG_VERSION=6 JDK_MAJOR_VERSION=1 JDK_MINOR_VERSION=6
 JDK_MICRO_VERSION=0 ARCH_DATA_MODEL=64 COOKED_BUILD_NUMBER=0
 ANT_HOME="/opt/local/share/java/apache-ant" FINDBUGS_HOME="/NOT-
 SET/devtools/share/findbugs/latest" ALT_OUTPUTDIR=/tmp/root/jdk-
 outputdir/corba ALT_BOOTDIR=/opt/local/share/java/openjdk6_bootstrap
 ALT_JDK_IMPORT_PATH=/NOT-SET/re/openjdk/6/promoted/latest/binaries/bsd-
 Power Macintosh ALT_LANGTOOLS_DIST=/tmp/root/jdk-outputdir/langtools/dist
 all)
 JAVA_HOME=/opt/local/share/java/openjdk6_bootstrap
 ANT_OPTS=-Djava.io.tmpdir='/tmp/root/jdk-outputdir/langtools/build/ant-
 tmp' /opt/local/share/java/apache-ant/bin/ant -diagnostics > /tmp/root
 /jdk-outputdir/langtools/build/ant-diagnostics.log
 /opt/local/share/java/apache-ant/bin/ant: line 326:
 /opt/local/share/java/openjdk6_bootstrap/jre/bin/java: Bad CPU type in
 executable
 /opt/local/share/java/apache-ant/bin/ant: line 326:
 /opt/local/share/java/openjdk6_bootstrap/jre/bin/java: Unknown error: 0
 make[1]: *** [build] Error 1
 make: *** [langtools-build] Error 2
 make: *** Waiting for unfinished jobs....
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared/Defs.gmk:368:
 "WARNING: Value of PREVIOUS_JDK_FILE contains a space: 'jdk-6-bsd-Power
 Macintosh.tar.gz', check or set ALT_PREVIOUS_JDK_FILE"
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared/Defs.gmk:378:
 "WARNING: Value of PREVIOUS_JRE_FILE contains a space: 'jre-6-bsd-Power
 Macintosh.tar.gz', check or set ALT_PREVIOUS_JRE_FILE"
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared/Defs.gmk:405:
 "WARNING: Value of PREVIOUS_RELEASE_PATH contains a space: '/NOT-
 SET/re/jdk/1.6.0/archive/fcs/bundles/bsd-Power Macintosh', check or set
 ALT_PREVIOUS_RELEASE_PATH"
 common/shared/Defs-bsd.gmk:138: "WARNING: Value of JDK_IMPORT_PATH cannot
 be empty, check or set ALT_JDK_IMPORT_PATH"
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared/Defs.gmk:455:
 "WARNING: OUTPUTDIR '/tmp/root/jdk-outputdir' not writable, will use
 '/tmp/root/jdk-outputdir'"
 make[1]: *** No rule to make target `Macintosh'.  Stop.
 make: *** [corba-build] Error 2
 /bin/sh: /NOT-SET/devtools/share/findbugs/latest/bin/findbugs: No such
 file or directory
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared
 /Sanity-Settings.gmk:125: WARNING: FINDBUGS_VER should not be empty
 [Sanity-Settings.gmk]
 /bin/sh: line 0: [: /bin/sh:: integer expression expected
 /bin/sh: line 0: [: /bin/sh:: integer expression expected
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared/Defs.gmk:368:
 "WARNING: Value of PREVIOUS_JDK_FILE contains a space: 'jdk-6-bsd-Power
 Macintosh.tar.gz', check or set ALT_PREVIOUS_JDK_FILE"
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared/Defs.gmk:378:
 "WARNING: Value of PREVIOUS_JRE_FILE contains a space: 'jre-6-bsd-Power
 Macintosh.tar.gz', check or set ALT_PREVIOUS_JRE_FILE"
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared/Defs.gmk:405:
 "WARNING: Value of PREVIOUS_RELEASE_PATH contains a space: '/NOT-
 SET/re/jdk/1.6.0/archive/fcs/bundles/bsd-Power Macintosh', check or set
 ALT_PREVIOUS_RELEASE_PATH"
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/jdk/make/common/shared/Defs.gmk:455:
 "WARNING: OUTPUTDIR '/tmp/root/jdk-outputdir' not writable, will use
 '/tmp/root/jdk-outputdir'"
 make[2]: Nothing to be done for `all'.
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/./"
 && /usr/bin/make -j4 all
 ALT_BOOTDIR="/opt/local/share/java/openjdk6_bootstrap"
 ALT_BINARY_PLUGS_PATH="/opt/local/share/java/icedtea6-plugs/jre/lib/rt-
 closed.jar" ANT_HOME="/opt/local/share/java/apache-ant"
 ALT_FREETYPE_HEADERS_PATH="/opt/local/include"
 ALT_FREETYPE_LIB_PATH="/opt/local/lib"
 ALT_CUPS_HEADERS_PATH="/usr/include" ALT_MOTIF_DIR="/opt/local"
 ALT_X11_PATH="/opt/local" ALT_DEVTOOLS_PATH=/usr
 ALT_CACERTS_FILE=/System/Library/Frameworks/JavaVM.framework/Home/lib/security/cacerts
 NO_DOCS=true HOTSPOT_BUILD_JOBS=3 " returned error 2
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_java_openjdk6/work/./"
 && /usr/bin/make -j4 all
 ALT_BOOTDIR="/opt/local/share/java/openjdk6_bootstrap"
 ALT_BINARY_PLUGS_PATH="/opt/local/share/java/icedtea6-plugs/jre/lib/rt-
 closed.jar" ANT_HOME="/opt/local/share/java/apache-ant"
 ALT_FREETYPE_HEADERS_PATH="/opt/local/include"
 ALT_FREETYPE_LIB_PATH="/opt/local/lib"
 ALT_CUPS_HEADERS_PATH="/usr/include" ALT_MOTIF_DIR="/opt/local"
 ALT_X11_PATH="/opt/local" ALT_DEVTOOLS_PATH=/usr
 ALT_CACERTS_FILE=/System/Library/Frameworks/JavaVM.framework/Home/lib/security/cacerts
 NO_DOCS=true HOTSPOT_BUILD_JOBS=3 " returned error 2
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for openjdk6):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>
 darnoc-desktop:~ conradwt$
 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/23331>
MacPorts <http://www.macports.org/>
Ports system for Mac OS