[MacPorts] #23442: mit-scheme 20090107 Configure error - build failure

MacPorts noreply at macports.org
Tue Jan 26 22:03:36 PST 2010 

#23442: mit-scheme 20090107 Configure error - build failure
-------------------------------------------+--------------------------------
 Reporter:  darin-macports@…               |       Owner:  macports-tickets@…                   
     Type:  defect                         |      Status:  new                                  
 Priority:  Normal                         |   Milestone:                                       
Component:  ports                          |     Version:  1.8.2                                
 Keywords:                                 |        Port:  mit-scheme                           
-------------------------------------------+--------------------------------
 I installed MacPorts for the first time tonight, so I had an utterly
 clean, fresh system. The first package I installed was MIT Scheme via
 "sudo port install mit-scheme". The first time resulted in a build
 failure; all subsequent steps resulted in a build failure as well. I'm
 using the latest version of Xcode (3.2.1) on OS 10.6.2 on an early 2008
 Quad Xenon Mac Pro (8 core). The following is my build log:

 {{{
 BigMac:mit-scheme-c-20090107 Darin$ sudo port -d install mit-scheme
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang
 /mit-scheme
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/mit-
 scheme
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: not using configure, so not adding the default universal variant
 DEBUG: Requested variant darwin is not provided by port mit-scheme.
 DEBUG: Requested variant i386 is not provided by port mit-scheme.
 DEBUG: Requested variant macosx is not provided by port mit-scheme.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.3_0  is the latest installed
 DEBUG: xorg-libX11 1.3.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1  is the latest installed
 DEBUG: pkgconfig 0.23_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.5.0_0  is the latest installed
 DEBUG: xorg-util-macros 1.5.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros
 1.5.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0  is the latest installed
 DEBUG: xorg-libXau 1.0.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
 --->  Computing dependencies for mit-scheme
 DEBUG: Searching for dependency: xorg-libX11
 DEBUG: Found Dependency: receipt exists for xorg-libX11
 DEBUG: Executing org.macports.main (mit-scheme)
 DEBUG: Skipping completed org.macports.fetch (mit-scheme)
 DEBUG: Skipping completed org.macports.checksum (mit-scheme)
 DEBUG: Skipping completed org.macports.extract (mit-scheme)
 DEBUG: Skipping completed org.macports.patch (mit-scheme)
 DEBUG: Skipping completed org.macports.configure (mit-scheme)
 --->  Building mit-scheme
 DEBUG: Executing org.macports.build (mit-scheme)
 DEBUG: port disallows a parallel build
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' CC='/usr/bin/gcc-4.2'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_lang_mit-scheme/work/mit-scheme-c-20090107/src" && etc
 /make-liarc.sh --prefix=/opt/local'
 run_cmd: ./configure
 --prefix=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_lang_mit-scheme/work/mit-scheme-c-20090107/src/boot-
 root --enable-native-code=c
 checking whether make sets $(MAKE)... yes
 checking for a BSD-compatible install... /usr/bin/install -c
 checking whether ln -s works... yes
 Makefiles already created.
 configure: creating ./config.status
 config.status: creating Makefile
 config.status: creating 6001/Makefile
 config.status: creating compiler/Makefile
 config.status: creating cref/Makefile
 config.status: creating edwin/Makefile
 config.status: creating imail/Makefile
 config.status: creating runtime/Makefile
 config.status: creating sf/Makefile
 config.status: creating sos/Makefile
 config.status: creating ssp/Makefile
 config.status: creating star-parser/Makefile
 config.status: creating win32/Makefile
 config.status: creating xdoc/Makefile
 config.status: creating xml/Makefile
 === configuring in microcode
 (/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_lang_mit-scheme/work/mit-
 scheme-c-20090107/src/microcode)
 configure: running /bin/sh ./configure '--
 prefix=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_lang_mit-scheme/work/mit-scheme-c-20090107/src/boot-
 root'  '--enable-native-code=c' --cache-file=/dev/null --srcdir=.
 checking whether make sets $(MAKE)... yes
 checking build system type... i386-apple-darwin10.2.0
 checking host system type... i386-apple-darwin10.2.0
 checking for gcc... /usr/bin/gcc-4.2
 checking for C compiler default output file name... a.out
 checking whether the C compiler works... yes
 checking whether we are cross compiling... no
 checking for suffix of executables...
 checking for suffix of object files... o
 checking whether we are using the GNU C compiler... yes
 checking whether /usr/bin/gcc-4.2 accepts -g... yes
 checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed
 checking whether backslash-a works in strings... yes
 checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
 checking for grep that handles long lines and -e... /usr/bin/grep
 checking for egrep... /usr/bin/grep -E
 checking for ANSI C header files... yes
 checking for sys/types.h... yes
 checking for sys/stat.h... yes
 checking for stdlib.h... yes
 checking for string.h... yes
 checking for memory.h... yes
 checking for strings.h... yes
 checking for inttypes.h... yes
 checking for stdint.h... yes
 checking for unistd.h... yes
 checking whether byte ordering is bigendian... no
 checking for an ANSI C-conforming const... yes
 checking for C/C++ restrict keyword... __restrict
 checking for working volatile... yes
 checking for inline... inline
 checking for preprocessor stringizing operator... rm: conftest.dSYM: is a
 directory
 yes
 checking for function prototypes... yes
 checking for a BSD-compatible install... /usr/bin/install -c
 checking whether ln -s works... yes
 checking whether make sets $(MAKE)... (cached) yes
 checking for GCC>=4... yes
 checking for exp in -lm... yes
 checking for dirent.h that defines DIR... yes
 checking for library containing opendir... none required
 checking for ANSI C header files... (cached) yes
 checking for stdbool.h that conforms to C99... yes
 checking for _Bool... yes
 checking for sys/wait.h that is POSIX.1 compatible... yes
 checking whether time.h and sys/time.h may both be included... yes
 checking bsdtty.h usability... no
 checking bsdtty.h presence... no
 checking for bsdtty.h... no
 checking fcntl.h usability... yes
 checking fcntl.h presence... yes
 checking for fcntl.h... yes
 checking fenv.h usability... yes
 checking fenv.h presence... yes
 checking for fenv.h... yes
 checking limits.h usability... yes
 checking limits.h presence... yes
 checking for limits.h... yes
 checking malloc.h usability... no
 checking malloc.h presence... no
 checking for malloc.h... no
 checking sgtty.h usability... yes
 checking sgtty.h presence... yes
 checking for sgtty.h... yes
 checking stropts.h usability... no
 checking stropts.h presence... no
 checking for stropts.h... no
 checking time.h usability... yes
 checking time.h presence... yes
 checking for time.h... yes
 checking sys/file.h usability... yes
 checking sys/file.h presence... yes
 checking for sys/file.h... yes
 checking sys/ioctl.h usability... yes
 checking sys/ioctl.h presence... yes
 checking for sys/ioctl.h... yes
 checking sys/mount.h usability... yes
 checking sys/mount.h presence... yes
 checking for sys/mount.h... yes
 checking sys/param.h usability... yes
 checking sys/param.h presence... yes
 checking for sys/param.h... yes
 checking sys/poll.h usability... yes
 checking sys/poll.h presence... yes
 checking for sys/poll.h... yes
 checking sys/ptyio.h usability... no
 checking sys/ptyio.h presence... no
 checking for sys/ptyio.h... no
 checking sys/socket.h usability... yes
 checking sys/socket.h presence... yes
 checking for sys/socket.h... yes
 checking sys/time.h usability... yes
 checking sys/time.h presence... yes
 checking for sys/time.h... yes
 checking sys/un.h usability... yes
 checking sys/un.h presence... yes
 checking for sys/un.h... yes
 checking sys/vfs.h usability... no
 checking sys/vfs.h presence... no
 checking for sys/vfs.h... no
 checking termio.h usability... no
 checking termio.h presence... no
 checking for termio.h... no
 checking termios.h usability... yes
 checking termios.h presence... yes
 checking for termios.h... yes
 checking for unistd.h... (cached) yes
 checking utime.h usability... yes
 checking utime.h presence... yes
 checking for utime.h... yes
 checking dlfcn.h usability... yes
 checking dlfcn.h presence... yes
 checking for dlfcn.h... yes
 checking netdb.h usability... yes
 checking netdb.h presence... yes
 checking for netdb.h... yes
 checking signal.h usability... yes
 checking signal.h presence... yes
 checking for signal.h... yes
 checking sys/mman.h usability... yes
 checking sys/mman.h presence... yes
 checking for sys/mman.h... yes
 checking float.h usability... yes
 checking float.h presence... yes
 checking for float.h... yes
 checking assert.h usability... yes
 checking assert.h presence... yes
 checking for assert.h... yes
 checking for stdint.h... (cached) yes
 checking for mode_t... yes
 checking for off_t... yes
 checking for pid_t... yes
 checking return type of signal handlers... void
 checking for size_t... yes
 checking for uid_t in sys/types.h... rm: conftest.dSYM: is a directory
 yes
 checking for int8_t... yes
 checking for int16_t... yes
 checking for int32_t... yes
 checking for uint8_t... yes
 checking for uint16_t... yes
 checking for uint32_t... yes
 checking for intptr_t... yes
 checking for uintptr_t... yes
 checking for char... yes
 checking size of char... 1
 checking for short... yes
 checking size of short... 2
 checking for int... yes
 checking size of int... 4
 checking for long... yes
 checking size of long... 8
 checking for unsigned char... yes
 checking size of unsigned char... 1
 checking for unsigned short... yes
 checking size of unsigned short... 2
 checking for unsigned int... yes
 checking size of unsigned int... 4
 checking for unsigned long... yes
 checking size of unsigned long... 8
 checking for void *... yes
 checking size of void *... 8
 checking for intptr_t... (cached) yes
 checking size of intptr_t... 8
 checking for uintptr_t... (cached) yes
 checking size of uintptr_t... 8
 checking for nlink_t... yes
 checking for clock_t... yes
 checking for time_t... yes
 checking for socklen_t... yes
 checking for cc_t... yes
 checking for speed_t... yes
 checking whether struct tm is in sys/time.h or time.h... time.h
 checking for struct tm.tm_zone... yes
 checking for struct tm.tm_gmtoff... yes
 checking for struct ltchars... no
 checking for struct hostent.h_addr_list... yes
 checking for struct sigcontext... no
 checking whether byte ordering is bigendian... (cached) no
 checking whether char is unsigned... no
 checking for an ANSI C-conforming const... (cached) yes
 checking whether getpgrp requires zero arguments... yes
 checking for working memcmp... yes
 checking for stdlib.h... (cached) yes
 checking for unistd.h... (cached) yes
 checking for getpagesize... yes
 checking for working mmap... yes
 checking whether setpgrp takes no argument... yes
 checking whether setvbuf arguments are reversed... no
 checking for utime.h... (cached) yes
 checking whether utime accepts a null argument... yes
 checking vfork.h usability... no
 checking vfork.h presence... no
 checking for vfork.h... no
 checking for fork... yes
 checking for vfork... yes
 checking for working fork... yes
 checking for working vfork... (cached) yes
 checking for vprintf... yes
 checking for _doprnt... no
 checking for wait3 that fills in rusage... yes
 checking for ctermid... yes
 checking for dup2... yes
 checking for fcntl... yes
 checking for fegetround... yes
 checking for fesetround... yes
 checking for floor... yes
 checking for fpathconf... yes
 checking for frexp... yes
 checking for ftruncate... yes
 checking for getcwd... yes
 checking for gethostbyname... yes
 checking for gethostname... yes
 checking for getlogin... yes
 checking for getpagesize... (cached) yes
 checking for getpgrp... yes
 checking for getpt... no
 checking for gettimeofday... yes
 checking for getwd... yes
 checking for grantpt... yes
 checking for kill... yes
 checking for lockf... yes
 checking for memcpy... yes
 checking for mkdir... yes
 checking for mktime... yes
 checking for modf... yes
 checking for nice... yes
 checking for poll... yes
 checking for prealloc... no
 checking for rename... yes
 checking for rmdir... yes
 checking for select... yes
 checking for setitimer... yes
 checking for setpgrp... yes
 checking for setpgrp2... no
 checking for shmat... yes
 checking for sigaction... yes
 checking for sighold... yes
 checking for socket... yes
 checking for statfs... yes
 checking for strchr... yes
 checking for strerror... yes
 checking for strstr... yes
 checking for strtol... yes
 checking for strtoul... yes
 checking for symlink... yes
 checking for sysconf... yes
 checking for times... yes
 checking for truncate... yes
 checking for uname... yes
 checking for utime... yes
 checking for waitpid... yes
 checking for X... libraries /opt/local/lib, headers
 checking for special C compiler options needed for large files... no
 checking for _FILE_OFFSET_BITS value needed for large files... no
 rm: conftest.dSYM: is a directory
 checking for long file names... yes
 checking for restartable system calls... yes
 checking for tparm in -lncurses... yes
 checking curses.h usability... yes
 checking curses.h presence... yes
 checking for curses.h... yes
 checking term.h usability... yes
 checking term.h presence... yes
 checking for term.h... yes
 checking for tparam in -lncurses... no
 checking openssl/blowfish.h usability... yes
 checking openssl/blowfish.h presence... yes
 checking for openssl/blowfish.h... yes
 checking openssl/md5.h usability... yes
 checking openssl/md5.h presence... yes
 checking for openssl/md5.h... yes
 checking for BF_set_key in -lcrypto... yes
 checking mhash.h usability... no
 checking mhash.h presence... no
 checking for mhash.h... no
 checking mcrypt.h usability... no
 checking mcrypt.h presence... no
 checking for mcrypt.h... no
 checking gdbm.h usability... no
 checking gdbm.h presence... no
 checking for gdbm.h... no
 checking db.h usability... yes
 checking db.h presence... yes
 checking for db.h... yes
 checking for db_create in -ldb-4... no
 checking for pg_config... no
 checking libpq-fe.h usability... no
 checking libpq-fe.h presence... no
 checking for libpq-fe.h... no
 checking for dlopen... yes
 checking for native-code support... yes, using portable C code
 configure: creating ./config.status
 config.status: creating liarc-cc
 config.status: creating liarc-ld
 config.status: creating Makefile
 config.status: creating config.h
 config.status: config.h is unchanged
 config.status: linking ./cmpauxmd/c.c to cmpauxmd.c
 config.status: linking ./cmpintmd/c.h to cmpintmd.h
 config.status: linking ./cmpintmd/c.c to cmpintmd.c
 config.status: linking ./cmpintmd/c-config.h to cmpintmd-config.h
 === configuring in compiler
 (/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_lang_mit-scheme/work/mit-
 scheme-c-20090107/src/compiler)
 configure: running /bin/sh ./configure '--
 prefix=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_lang_mit-scheme/work/mit-scheme-c-20090107/src/boot-
 root'  '--enable-native-code=c' --cache-file=/dev/null --srcdir=.
 rm -f machine
 ln -s machines/C machine
 ln -s machine/make.com .
 ln: ./make.com: File exists
 configure: error: ./configure failed for compiler
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_lang_mit-scheme/work/mit-scheme-c-20090107/src" && etc
 /make-liarc.sh --prefix=/opt/local " returned error 1
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_lang_mit-scheme/work/mit-scheme-c-20090107/src" && etc
 /make-liarc.sh --prefix=/opt/local " returned error 1
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for mit-scheme):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>
 BigMac:mit-scheme-c-20090107 Darin$
 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/23442>
MacPorts <http://www.macports.org/>
Ports system for Mac OS

More information about the macports-tickets mailing list