[MacPorts] #25509: autoreconf failure
MacPorts
noreply at macports.org
Sat Jul 3 14:47:12 PDT 2010
#25509: autoreconf failure
-----------------------------------+----------------------------------------
Reporter: dong5600@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version:
Keywords: | Port: autoconf
-----------------------------------+----------------------------------------
Changes (by ram@…):
* cc: ram@… (added)
* priority: High => Normal
* version: 1.9.1 =>
* type: request => defect
* port: => autoconf
Old description:
> {{{
>
> }}}
> Hi, all:
> I am inexperience in macports. I need to install Arb on Mac
> OS X 10.6.4. After I installed Xcode and X11 and followed the protocol
> to install and update MacPorts to 10.9.1, I used "sudo port -d install
> arb" but the installation cannot be finished and the error information at
> the end is:
>
> autoreconf: Entering directory `.'
> autoreconf: configure.ac: not using Gettext
> autoreconf: running: aclocal --force
> configure.ac:28: warning: AC_INIT: not a literal:
> https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
> autoreconf: configure.ac: tracing
> configure.ac:28: warning: AC_INIT: not a literal:
> https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
> autoreconf: running: glibtoolize --copy --force
> glibtoolize: putting auxiliary files in `.'.
> glibtoolize: copying file `./ltmain.sh'
> glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac
> and
> glibtoolize: rerunning glibtoolize, to keep the correct libtool macros
> in-tree.
> glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
> configure.ac:28: warning: AC_INIT: not a literal:
> https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
> autoreconf: running: /opt/local/bin/autoconf --force
> configure.ac:28: warning: AC_INIT: not a literal:
> https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
> configure:10695: error: possibly undefined macro: AS_MESSAGE_LOG_FDdnl
> If this token and others are legitimate, please use
> m4_pattern_allow.
> See the Autoconf documentation.
> autoreconf: /opt/local/bin/autoconf failed with exit status: 1
> shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_xorg-libXp/work/libXp-1.0.0" && autoreconf
> --install -fvi " returned error 1
> Error: Target org.macports.configure returned: autoreconf failure: shell
> command failed
> DEBUG: Backtrace: autoreconf failure: shell command failed
> while executing
> "$procedure $targetname"
> Warning: the following items did not execute (for xorg-libXp):
> org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> Log for xorg-libXp is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_xorg-libXp/main.log
> Error: The following dependencies failed to build: glw openmotif xorg-
> libXp gsed imake xorg-cf-files lynx openssl sablotron spidermonkey nspr
> readline tiff
> Error: Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
>
> Can anyone give some suggestion? Millions of thanks!
>
> YR
New description:
I am inexperience in macports. I need to install Arb on Mac OS X 10.6.4.
After I installed Xcode and X11 and followed the protocol to install and
update MacPorts to 10.9.1, I used "sudo port -d install arb" but the
installation cannot be finished and the error information at the end is:
{{{
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force
configure.ac:28: warning: AC_INIT: not a literal:
https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
autoreconf: configure.ac: tracing
configure.ac:28: warning: AC_INIT: not a literal:
https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in `.'.
glibtoolize: copying file `./ltmain.sh'
glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac
and
glibtoolize: rerunning glibtoolize, to keep the correct libtool macros in-
tree.
glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:28: warning: AC_INIT: not a literal:
https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
autoreconf: running: /opt/local/bin/autoconf --force
configure.ac:28: warning: AC_INIT: not a literal:
https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
configure:10695: error: possibly undefined macro: AS_MESSAGE_LOG_FDdnl
If this token and others are legitimate, please use
m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /opt/local/bin/autoconf failed with exit status: 1
shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-libXp/work/libXp-1.0.0" && autoreconf
--install -fvi " returned error 1
Error: Target org.macports.configure returned: autoreconf failure: shell
command failed
DEBUG: Backtrace: autoreconf failure: shell command failed
while executing
"$procedure $targetname"
Warning: the following items did not execute (for xorg-libXp):
org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install
Log for xorg-libXp is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-libXp/main.log
Error: The following dependencies failed to build: glw openmotif xorg-
libXp gsed imake xorg-cf-files lynx openssl sablotron spidermonkey nspr
readline tiff
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
}}}
--
Comment:
What version of autoconf are you using? The latest is @2.66_1 which was
committed an hour or so ago, make sure you using this version.
--
Ticket URL: <http://trac.macports.org/ticket/25509#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list