[MacPorts] #25518: cannot install xorg-libXp
MacPorts
noreply at macports.org
Sun Jul 4 21:43:05 PDT 2010
#25518: cannot install xorg-libXp
-------------------------------+--------------------------------------------
Reporter: pavlo72@… | Owner: jeremyhu@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.9.1
Keywords: | Port: xorg-libXp
-------------------------------+--------------------------------------------
Changes (by jmr@…):
* owner: macports-tickets@… => jeremyhu@…
* priority: High => Normal
Old description:
> Hello,
>
> I am trying to install xorg-libXp using macports 1.9.1 under snow leopard
> 6.4.3 and I
> get the following log file. I use the latest autoconf 2.66_2. I also
> tried the +universal version and got similar problems.
>
> Thanks for your help.
>
> ____________________________________________________________________________________
>
> version:1
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean pkgconfig 0.25_0 exists in the ports tree
> :debug:clean pkgconfig 0.25_0 is the latest installed
> :debug:clean pkgconfig 0.25_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! pkgconfig 0.25_0 >= pkgconfig 0.25_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-util-macros 1.9.0_0 exists in the ports tree
> :debug:clean xorg-util-macros 1.9.0_0 is the latest installed
> :debug:clean xorg-util-macros 1.9.0_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-util-macros
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Requested variant universal is not provided by port xorg-
> util-macros.
> :debug:clean No need to upgrade! xorg-util-macros 1.9.0_0 >= xorg-util-
> macros 1.9.0_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean autoconf 2.66_2 exists in the ports tree
> :debug:clean autoconf 2.66_2 is the latest installed
> :debug:clean autoconf 2.66_2 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Requested variant universal is not provided by port
> autoconf.
> :debug:clean No need to upgrade! autoconf 2.66_2 >= autoconf 2.66_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean perl5 5.8.9_0 exists in the ports tree
> :debug:clean perl5 5.8.9_0 is the latest installed
> :debug:clean perl5 5.8.9_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean universal_variant is false, so not adding the default
> universal variant
> :debug:clean Requested variant universal is not provided by port perl5.
> :debug:clean No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean perl5.8 5.8.9_3 exists in the ports tree
> :debug:clean perl5.8 5.8.9_3 is the latest installed
> :debug:clean perl5.8 5.8.9_3 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean m4 1.4.14_0 exists in the ports tree
> :debug:clean m4 1.4.14_0 is the latest installed
> :debug:clean m4 1.4.14_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean help2man 1.38.2_0 exists in the ports tree
> :debug:clean help2man 1.38.2_0 is the latest installed
> :debug:clean help2man 1.38.2_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! help2man 1.38.2_0 >= help2man 1.38.2_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean p5-locale-gettext 1.05_2 exists in the ports tree
> :debug:clean p5-locale-gettext 1.05_2 is the latest installed
> :debug:clean p5-locale-gettext 1.05_2 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:clean Re-registering default for configure.universal_args
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-
> gettext 1.05_2
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean gettext 0.18.1.1_0 exists in the ports tree
> :debug:clean gettext 0.18.1.1_0 is the latest installed
> :debug:clean gettext 0.18.1.1_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libiconv 1.13.1_0 exists in the ports tree
> :debug:clean libiconv 1.13.1_0 is the latest installed
> :debug:clean libiconv 1.13.1_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean ncurses 5.7_0 exists in the ports tree
> :debug:clean ncurses 5.7_0 is the latest installed
> :debug:clean ncurses 5.7_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean ncursesw 5.7_0 exists in the ports tree
> :debug:clean ncursesw 5.7_0 is the latest installed
> :debug:clean ncursesw 5.7_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean universal variant already exists, so not adding the default
> one
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean expat 2.0.1_0 exists in the ports tree
> :debug:clean expat 2.0.1_0 is the latest installed
> :debug:clean expat 2.0.1_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean automake 1.11.1_0 exists in the ports tree
> :debug:clean automake 1.11.1_0 is the latest installed
> :debug:clean automake 1.11.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Requested variant universal is not provided by port
> automake.
> :debug:clean No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean libtool 2.2.10_0 exists in the ports tree
> :debug:clean libtool 2.2.10_0 is the latest installed
> :debug:clean libtool 2.2.10_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! libtool 2.2.10_0 >= libtool 2.2.10_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libXext 1.1.2_0 exists in the ports tree
> :debug:clean xorg-libXext 1.1.2_0 is the latest installed
> :debug:clean xorg-libXext 1.1.2_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXext
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext
> 1.1.2_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libX11 1.3.4_0 exists in the ports tree
> :debug:clean xorg-libX11 1.3.4_0 is the latest installed
> :debug:clean xorg-libX11 1.3.4_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libX11
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11
> 1.3.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libXdmcp 1.0.3_0 exists in the ports tree
> :debug:clean xorg-libXdmcp 1.0.3_0 is the latest installed
> :debug:clean xorg-libXdmcp 1.0.3_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXdmcp
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp
> 1.0.3_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libXau 1.0.5_0 exists in the ports tree
> :debug:clean xorg-libXau 1.0.5_0 is the latest installed
> :debug:clean xorg-libXau 1.0.5_0 +universal is active
> :debug:clean Merging existing variants '+universal' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libXau
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean adding the default universal variant
> :debug:clean Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:clean Executing variant universal provides universal
> :debug:clean No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau
> 1.0.5_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-xproto 7.0.17_0 exists in the ports tree
> :debug:clean xorg-xproto 7.0.17_0 is the latest installed
> :debug:clean xorg-xproto 7.0.17_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xproto
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Requested variant universal is not provided by port xorg-
> xproto.
> :debug:clean No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto
> 7.0.17_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-kbproto 1.0.4_0 exists in the ports tree
> :debug:clean xorg-kbproto 1.0.4_0 is the latest installed
> :debug:clean xorg-kbproto 1.0.4_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-kbproto
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Requested variant universal is not provided by port xorg-
> kbproto.
> :debug:clean No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto
> 1.0.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-xextproto 7.1.1_0 exists in the ports tree
> :debug:clean xorg-xextproto 7.1.1_0 is the latest installed
> :debug:clean xorg-xextproto 7.1.1_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-xextproto
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Requested variant universal is not provided by port xorg-
> xextproto.
> :debug:clean No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
> 7.1.1_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-printproto 1.0.4_0 exists in the ports tree
> :debug:clean xorg-printproto 1.0.4_0 is the latest installed
> :debug:clean xorg-printproto 1.0.4_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-printproto
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Requested variant universal is not provided by port xorg-
> printproto.
> :debug:clean No need to upgrade! xorg-printproto 1.0.4_0 >= xorg-
> printproto 1.0.4_0
> :debug:clean epoch: in tree: 0 installed: 0
> :debug:clean xorg-libpthread-stubs 0.3_0 exists in the ports tree
> :debug:clean xorg-libpthread-stubs 0.3_0 is the latest installed
> :debug:clean xorg-libpthread-stubs 0.3_0 is active
> :debug:clean Merging existing variants '' into variants
> :debug:clean new fully merged portvariants: universal +
> :debug:clean Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
> /xorg-libpthread-stubs
> :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
> :debug:clean org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:clean org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:clean org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:clean only one arch supported, so not adding the default universal
> variant
> :debug:clean Requested variant universal is not provided by port xorg-
> libpthread-stubs.
> :debug:clean No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
> libpthread-stubs 0.3_0
> :msg:clean ---> Computing dependencies for xorg-libXp:info:clean
> .:debug:clean Searching for dependency: pkgconfig
> :debug:clean Found Dependency: receipt exists for pkgconfig
> :debug:clean Searching for dependency: xorg-util-macros
> :debug:clean Found Dependency: receipt exists for xorg-util-macros
> :debug:clean Searching for dependency: autoconf
> :debug:clean Found Dependency: receipt exists for autoconf
> :debug:clean Searching for dependency: automake
> :debug:clean Found Dependency: receipt exists for automake
> :debug:clean Searching for dependency: libtool
> :debug:clean Found Dependency: receipt exists for libtool
> :debug:clean Searching for dependency: xorg-libXext
> :debug:clean Found Dependency: receipt exists for xorg-libXext
> :debug:clean Searching for dependency: xorg-printproto
> :debug:clean Found Dependency: receipt exists for xorg-printproto
> :debug:clean Searching for dependency: xorg-libpthread-stubs
> :debug:clean Found Dependency: receipt exists for xorg-libpthread-stubs
> :msg:clean
> :debug:main Executing org.macports.main (xorg-libXp)
> :debug:main Skipping completed org.macports.fetch (xorg-libXp)
> :debug:main Skipping completed org.macports.checksum (xorg-libXp)
> :debug:main setting option extract.cmd to /usr/bin/bzip2
> :debug:main Skipping completed org.macports.extract (xorg-libXp)
> :debug:main Skipping completed org.macports.patch (xorg-libXp)
> :msg:main ---> Configuring xorg-libXp
> :debug:main Using compiler 'Mac OS X gcc 4.2'
> :debug:configure configure phase started at Sun Jul 4 20:23:11 EDT 2010
> :debug:configure Executing org.macports.configure (xorg-libXp)
> :debug:configure Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_xorg-libXp/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.6'
> :debug:configure Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_xorg-libXp/work/libXp-1.0.0" && autoreconf
> --install -fvi'
> :info:configure autoreconf: Entering directory `.'
> :info:configure autoreconf: configure.ac: not using Gettext
> :info:configure autoreconf: running: aclocal --force
> :info:configure configure.ac:28: warning: AC_INIT: not a literal:
> https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
> :info:configure autoreconf: configure.ac: tracing
> :info:configure configure.ac:28: warning: AC_INIT: not a literal:
> https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
> :info:configure autoreconf: running: glibtoolize --copy --force
> :info:configure glibtoolize: putting auxiliary files in `.'.
> :info:configure glibtoolize: copying file `./ltmain.sh'
> :info:configure glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])'
> to configure.ac and
> :info:configure glibtoolize: rerunning glibtoolize, to keep the correct
> libtool macros in-tree.
> :info:configure glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS
> in Makefile.am.
> :info:configure configure.ac:28: warning: AC_INIT: not a literal:
> https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
> :info:configure autoreconf: running: /opt/local/bin/autoconf --force
> :info:configure configure.ac:28: warning: AC_INIT: not a literal:
> https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
> :info:configure configure:10695: error: possibly undefined macro:
> AS_MESSAGE_LOG_FDdnl
> :info:configure If this token and others are legitimate, please use
> m4_pattern_allow.
> :info:configure See the Autoconf documentation.
> :info:configure autoreconf: /opt/local/bin/autoconf failed with exit
> status: 1
> :info:configure shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_xorg-libXp/work/libXp-1.0.0" && autoreconf
> --install -fvi " returned error 1
> :error:configure Target org.macports.configure returned: autoreconf
> failure: shell command failed
> :debug:configure Backtrace: autoreconf failure: shell command failed
> while executing
> "$procedure $targetname"
> :info:configure Warning: the following items did not execute (for xorg-
> libXp): org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> :notice:configure Log for xorg-libXp is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
> .org_release_ports_x11_xorg-libXp/main.log
New description:
Hello,
I am trying to install xorg-libXp using macports 1.9.1 under snow leopard
6.4.3 and I
get the following log file. I use the latest autoconf 2.66_2. I also tried
the +universal version and got similar problems.
Thanks for your help.
____________________________________________________________________________________
{{{
version:1
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean pkgconfig 0.25_0 exists in the ports tree
:debug:clean pkgconfig 0.25_0 is the latest installed
:debug:clean pkgconfig 0.25_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! pkgconfig 0.25_0 >= pkgconfig 0.25_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-util-macros 1.9.0_0 exists in the ports tree
:debug:clean xorg-util-macros 1.9.0_0 is the latest installed
:debug:clean xorg-util-macros 1.9.0_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Requested variant universal is not provided by port xorg-
util-macros.
:debug:clean No need to upgrade! xorg-util-macros 1.9.0_0 >= xorg-util-
macros 1.9.0_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean autoconf 2.66_2 exists in the ports tree
:debug:clean autoconf 2.66_2 is the latest installed
:debug:clean autoconf 2.66_2 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Requested variant universal is not provided by port autoconf.
:debug:clean No need to upgrade! autoconf 2.66_2 >= autoconf 2.66_2
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean perl5 5.8.9_0 exists in the ports tree
:debug:clean perl5 5.8.9_0 is the latest installed
:debug:clean perl5 5.8.9_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean universal_variant is false, so not adding the default
universal variant
:debug:clean Requested variant universal is not provided by port perl5.
:debug:clean No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean perl5.8 5.8.9_3 exists in the ports tree
:debug:clean perl5.8 5.8.9_3 is the latest installed
:debug:clean perl5.8 5.8.9_3 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean m4 1.4.14_0 exists in the ports tree
:debug:clean m4 1.4.14_0 is the latest installed
:debug:clean m4 1.4.14_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean help2man 1.38.2_0 exists in the ports tree
:debug:clean help2man 1.38.2_0 is the latest installed
:debug:clean help2man 1.38.2_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! help2man 1.38.2_0 >= help2man 1.38.2_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean p5-locale-gettext 1.05_2 exists in the ports tree
:debug:clean p5-locale-gettext 1.05_2 is the latest installed
:debug:clean p5-locale-gettext 1.05_2 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
-locale-gettext
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:clean Re-registering default for configure.universal_args
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-
gettext 1.05_2
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean gettext 0.18.1.1_0 exists in the ports tree
:debug:clean gettext 0.18.1.1_0 is the latest installed
:debug:clean gettext 0.18.1.1_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:clean universal variant already exists, so not adding the default
one
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean libiconv 1.13.1_0 exists in the ports tree
:debug:clean libiconv 1.13.1_0 is the latest installed
:debug:clean libiconv 1.13.1_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean universal variant already exists, so not adding the default
one
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean ncurses 5.7_0 exists in the ports tree
:debug:clean ncurses 5.7_0 is the latest installed
:debug:clean ncurses 5.7_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean universal variant already exists, so not adding the default
one
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean ncursesw 5.7_0 exists in the ports tree
:debug:clean ncursesw 5.7_0 is the latest installed
:debug:clean ncursesw 5.7_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean universal variant already exists, so not adding the default
one
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean expat 2.0.1_0 exists in the ports tree
:debug:clean expat 2.0.1_0 is the latest installed
:debug:clean expat 2.0.1_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean automake 1.11.1_0 exists in the ports tree
:debug:clean automake 1.11.1_0 is the latest installed
:debug:clean automake 1.11.1_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Requested variant universal is not provided by port automake.
:debug:clean No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean libtool 2.2.10_0 exists in the ports tree
:debug:clean libtool 2.2.10_0 is the latest installed
:debug:clean libtool 2.2.10_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! libtool 2.2.10_0 >= libtool 2.2.10_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libXext 1.1.2_0 exists in the ports tree
:debug:clean xorg-libXext 1.1.2_0 is the latest installed
:debug:clean xorg-libXext 1.1.2_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext
1.1.2_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libX11 1.3.4_0 exists in the ports tree
:debug:clean xorg-libX11 1.3.4_0 is the latest installed
:debug:clean xorg-libX11 1.3.4_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11
1.3.4_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libXdmcp 1.0.3_0 exists in the ports tree
:debug:clean xorg-libXdmcp 1.0.3_0 is the latest installed
:debug:clean xorg-libXdmcp 1.0.3_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp
1.0.3_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libXau 1.0.5_0 exists in the ports tree
:debug:clean xorg-libXau 1.0.5_0 is the latest installed
:debug:clean xorg-libXau 1.0.5_0 +universal is active
:debug:clean Merging existing variants '+universal' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Executing variant universal provides universal
:debug:clean No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau
1.0.5_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-xproto 7.0.17_0 exists in the ports tree
:debug:clean xorg-xproto 7.0.17_0 is the latest installed
:debug:clean xorg-xproto 7.0.17_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Requested variant universal is not provided by port xorg-
xproto.
:debug:clean No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto
7.0.17_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-kbproto 1.0.4_0 exists in the ports tree
:debug:clean xorg-kbproto 1.0.4_0 is the latest installed
:debug:clean xorg-kbproto 1.0.4_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Requested variant universal is not provided by port xorg-
kbproto.
:debug:clean No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto
1.0.4_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-xextproto 7.1.1_0 exists in the ports tree
:debug:clean xorg-xextproto 7.1.1_0 is the latest installed
:debug:clean xorg-xextproto 7.1.1_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Requested variant universal is not provided by port xorg-
xextproto.
:debug:clean No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
7.1.1_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-printproto 1.0.4_0 exists in the ports tree
:debug:clean xorg-printproto 1.0.4_0 is the latest installed
:debug:clean xorg-printproto 1.0.4_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
printproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Requested variant universal is not provided by port xorg-
printproto.
:debug:clean No need to upgrade! xorg-printproto 1.0.4_0 >= xorg-
printproto 1.0.4_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:clean xorg-libpthread-stubs 0.3_0 is the latest installed
:debug:clean xorg-libpthread-stubs 0.3_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants: universal +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libpthread-stubs
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Requested variant universal is not provided by port xorg-
libpthread-stubs.
:debug:clean No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-
libpthread-stubs 0.3_0
:msg:clean ---> Computing dependencies for xorg-libXp:info:clean
.:debug:clean Searching for dependency: pkgconfig
:debug:clean Found Dependency: receipt exists for pkgconfig
:debug:clean Searching for dependency: xorg-util-macros
:debug:clean Found Dependency: receipt exists for xorg-util-macros
:debug:clean Searching for dependency: autoconf
:debug:clean Found Dependency: receipt exists for autoconf
:debug:clean Searching for dependency: automake
:debug:clean Found Dependency: receipt exists for automake
:debug:clean Searching for dependency: libtool
:debug:clean Found Dependency: receipt exists for libtool
:debug:clean Searching for dependency: xorg-libXext
:debug:clean Found Dependency: receipt exists for xorg-libXext
:debug:clean Searching for dependency: xorg-printproto
:debug:clean Found Dependency: receipt exists for xorg-printproto
:debug:clean Searching for dependency: xorg-libpthread-stubs
:debug:clean Found Dependency: receipt exists for xorg-libpthread-stubs
:msg:clean
:debug:main Executing org.macports.main (xorg-libXp)
:debug:main Skipping completed org.macports.fetch (xorg-libXp)
:debug:main Skipping completed org.macports.checksum (xorg-libXp)
:debug:main setting option extract.cmd to /usr/bin/bzip2
:debug:main Skipping completed org.macports.extract (xorg-libXp)
:debug:main Skipping completed org.macports.patch (xorg-libXp)
:msg:main ---> Configuring xorg-libXp
:debug:main Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Sun Jul 4 20:23:11 EDT 2010
:debug:configure Executing org.macports.configure (xorg-libXp)
:debug:configure Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-libXp/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:configure Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-libXp/work/libXp-1.0.0" && autoreconf
--install -fvi'
:info:configure autoreconf: Entering directory `.'
:info:configure autoreconf: configure.ac: not using Gettext
:info:configure autoreconf: running: aclocal --force
:info:configure configure.ac:28: warning: AC_INIT: not a literal:
https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
:info:configure autoreconf: configure.ac: tracing
:info:configure configure.ac:28: warning: AC_INIT: not a literal:
https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
:info:configure autoreconf: running: glibtoolize --copy --force
:info:configure glibtoolize: putting auxiliary files in `.'.
:info:configure glibtoolize: copying file `./ltmain.sh'
:info:configure glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])'
to configure.ac and
:info:configure glibtoolize: rerunning glibtoolize, to keep the correct
libtool macros in-tree.
:info:configure glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in
Makefile.am.
:info:configure configure.ac:28: warning: AC_INIT: not a literal:
https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
:info:configure autoreconf: running: /opt/local/bin/autoconf --force
:info:configure configure.ac:28: warning: AC_INIT: not a literal:
https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
:info:configure configure:10695: error: possibly undefined macro:
AS_MESSAGE_LOG_FDdnl
:info:configure If this token and others are legitimate, please use
m4_pattern_allow.
:info:configure See the Autoconf documentation.
:info:configure autoreconf: /opt/local/bin/autoconf failed with exit
status: 1
:info:configure shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-libXp/work/libXp-1.0.0" && autoreconf
--install -fvi " returned error 1
:error:configure Target org.macports.configure returned: autoreconf
failure: shell command failed
:debug:configure Backtrace: autoreconf failure: shell command failed
while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for xorg-
libXp): org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install
:notice:configure Log for xorg-libXp is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-libXp/main.log
}}}
--
Comment:
Please remember to preview and use WikiFormatting (or better, use an
attachment for lengthy output), and to cc the maintainer. As per the
ticket guidelines, the High priority is reserved for the use of MacPorts
team members.
--
Ticket URL: <http://trac.macports.org/ticket/25518#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list