[MacPorts] #25644: install dsniff on a MAC os x 10.6
MacPorts
noreply at macports.org
Mon Jul 12 01:00:53 PDT 2010
#25644: install dsniff on a MAC os x 10.6
-------------------------------+--------------------------------------------
Reporter: mxl1016@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 1.9.1
Keywords: | Port:
-------------------------------+--------------------------------------------
localhost:~ melody$ cat
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/main.log
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libnids 1.23_2 exists in the ports tree
:debug:main libnids 1.23_2 is the latest installed
:debug:main libnids 1.23_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libnids 1.23_2 >= libnids 1.23_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpcap 1.1.1_0 exists in the ports tree
:debug:main libpcap 1.0.0_1 is the latest installed
:debug:main libpcap 1.0.0_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_libpcap/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap/work
:debug:main Starting logging for libpcap
:debug:destroot Starting logging for libpcap
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean libnet11 1.1.4_0 exists in the ports tree
:debug:clean libnet11 1.1.4_0 is the latest installed
:debug:clean libnet11 1.1.4_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0
:debug:clean epoch: in tree: 1 installed: 1
:debug:clean openssl 1.0.0a_0 exists in the ports tree
:debug:clean openssl 0.9.8n_0 +darwin is the latest installed
:debug:clean openssl 0.9.8n_0 +darwin is active
:debug:clean Merging existing variants '+darwin' into variants
:debug:clean new fully merged portvariants: darwin +
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean universal variant already exists, so not adding the default
one
:debug:clean Requested variant darwin is not provided by port openssl.
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean zlib 1.2.5_0 exists in the ports tree
:debug:clean zlib 1.2.5_0 is the latest installed
:debug:clean zlib 1.2.5_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:clean Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_openssl/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl/work
:debug:clean Starting logging for openssl
:debug:destroot Starting logging for openssl
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libXmu 1.0.5_0 exists in the ports tree
:debug:clean xorg-libXmu 1.0.5_0 is the latest installed
:debug:clean xorg-libXmu 1.0.5_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXmu
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu
1.0.5_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libXext 1.1.2_0 exists in the ports tree
:debug:clean xorg-libXext 1.1.1_0 is the latest installed
:debug:clean xorg-libXext 1.1.1_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean pkgconfig 0.25_0 exists in the ports tree
:debug:clean pkgconfig 0.23_1 is the latest installed
:debug:clean pkgconfig 0.23_1 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig/work
:debug:clean Starting logging for pkgconfig
:debug:destroot Starting logging for pkgconfig
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libX11 1.3.4_0 exists in the ports tree
:debug:clean xorg-libX11 1.3.3_0 is the latest installed
:debug:clean xorg-libX11 1.3.3_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-util-macros 1.9.0_0 exists in the ports tree
:debug:clean xorg-util-macros 1.7.0_0 is the latest installed
:debug:clean xorg-util-macros 1.7.0_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-util-macros/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
util-macros/work
:debug:clean Starting logging for xorg-util-macros
:debug:destroot Starting logging for xorg-util-macros
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-xtrans 1.2.5_0 exists in the ports tree
:debug:clean xorg-xtrans 1.2.5_0 is the latest installed
:debug:clean xorg-xtrans 1.2.5_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xtrans
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans
1.2.5_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-bigreqsproto 1.1.0_0 exists in the ports tree
:debug:clean xorg-bigreqsproto 1.1.0_0 is the latest installed
:debug:clean xorg-bigreqsproto 1.1.0_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
bigreqsproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-
bigreqsproto 1.1.0_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-xcmiscproto 1.2.0_0 exists in the ports tree
:debug:clean xorg-xcmiscproto 1.2.0_0 is the latest installed
:debug:clean xorg-xcmiscproto 1.2.0_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xcmiscproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-
xcmiscproto 1.2.0_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-xextproto 7.1.1_0 exists in the ports tree
:debug:clean xorg-xextproto 7.1.1_0 is the latest installed
:debug:clean xorg-xextproto 7.1.1_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xextproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
7.1.1_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
:debug:clean xorg-xf86bigfontproto 1.2.0_0 is the latest installed
:debug:clean xorg-xf86bigfontproto 1.2.0_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xf86bigfontproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
xf86bigfontproto 1.2.0_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-inputproto 2.0_0 exists in the ports tree
:debug:clean xorg-inputproto 2.0_0 is the latest installed
:debug:clean xorg-inputproto 2.0_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
inputproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto
2.0_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libXdmcp 1.0.3_0 exists in the ports tree
:debug:clean xorg-libXdmcp 1.0.3_0 is the latest installed
:debug:clean xorg-libXdmcp 1.0.3_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXdmcp
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp
1.0.3_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libXau 1.0.5_0 exists in the ports tree
:debug:clean xorg-libXau 1.0.5_0 is the latest installed
:debug:clean xorg-libXau 1.0.5_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXau
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau
1.0.5_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-xproto 7.0.17_0 exists in the ports tree
:debug:clean xorg-xproto 7.0.16_0 is the latest installed
:debug:clean xorg-xproto 7.0.16_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-xproto/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
xproto/work
:debug:clean Starting logging for xorg-xproto
:debug:destroot Starting logging for xorg-xproto
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-kbproto 1.0.4_0 exists in the ports tree
:debug:clean xorg-kbproto 1.0.4_0 is the latest installed
:debug:clean xorg-kbproto 1.0.4_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
kbproto
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean only one arch supported, so not adding the default universal
variant
:debug:clean No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto
1.0.4_0
:debug:clean Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-libX11/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libX11/work
:debug:clean Starting logging for xorg-libX11
:debug:destroot Starting logging for xorg-libX11
:debug:clean Attempting ln -sf
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
.org_release_ports_x11_xorg-libXext/work
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXext/work
:debug:clean Starting logging for xorg-libXext
:debug:destroot Starting logging for xorg-libXext
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libXt 1.0.8_0 exists in the ports tree
:debug:clean xorg-libXt 1.0.8_0 is the latest installed
:debug:clean xorg-libXt 1.0.8_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libXt
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libsm 1.1.1_0 exists in the ports tree
:debug:clean xorg-libsm 1.1.1_0 is the latest installed
:debug:clean xorg-libsm 1.1.1_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libsm
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
:debug:clean epoch: in tree: 0 installed: 0
:debug:clean xorg-libice 1.0.6_0 exists in the ports tree
:debug:clean xorg-libice 1.0.6_0 is the latest installed
:debug:clean xorg-libice 1.0.6_0 is active
:debug:clean Merging existing variants '' into variants
:debug:clean new fully merged portvariants:
:debug:clean Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
libice
:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-
existing procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:clean No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice
1.0.6_0
:msg:clean ---> Computing dependencies for dsniff:info:clean
.:debug:clean Searching for dependency: libnids
:debug:clean Found Dependency: receipt exists for libnids
:debug:clean Searching for dependency: libpcap
:debug:clean Found Dependency: receipt exists for libpcap
:debug:clean Searching for dependency: openssl
:debug:clean Found Dependency: receipt exists for openssl
:debug:clean Searching for dependency: xorg-libXmu
:debug:clean Found Dependency: receipt exists for xorg-libXmu
:msg:clean
:debug:main Executing org.macports.main (dsniff)
:debug:main Skipping completed org.macports.fetch (dsniff)
:debug:main Skipping completed org.macports.checksum (dsniff)
:debug:main Skipping completed org.macports.extract (dsniff)
:debug:main Skipping completed org.macports.patch (dsniff)
:debug:main Skipping completed org.macports.configure (dsniff)
:msg:main ---> Building dsniff
:debug:build build phase started at Mon Jul 12 15:55:37 CST 2010
:debug:build Executing org.macports.build (dsniff)
:debug:build Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:build Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/work/dsniff-2.3"
&& /usr/bin/make -j2 all'
:info:build /usr/bin/gcc-4.2 -O2 -DBIND_8_COMPAT -arch x86_64
-D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS
-DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I.
-I/opt/local/include -I/opt/local/include -I/opt/local/include
-I/opt/local/include -I./missing -c ./arpspoof.c
:info:build /usr/bin/gcc-4.2 -O2 -DBIND_8_COMPAT -arch x86_64
-D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS
-DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I.
-I/opt/local/include -I/opt/local/include -I/opt/local/include
-I/opt/local/include -I./missing -c ./dnsspoof.c
:info:build ./arpspoof.c:25: warning: 'struct ether_addr' declared inside
parameter list
:info:build ./arpspoof.c:25: warning: its scope is only this definition or
declaration, which is probably not what you want
:info:build ./arpspoof.c:26: warning: 'struct ether_addr' declared inside
parameter list
:info:build ./arpspoof.c: In function 'arp_send':
:info:build ./arpspoof.c:49: warning: passing argument 1 of
'libnet_get_hwaddr' from incompatible pointer type
:info:build ./arpspoof.c:49: error: too many arguments to function
'libnet_get_hwaddr'
:info:build ./arpspoof.c:60: warning: passing argument 6 of
'libnet_build_ethernet' from incompatible pointer type
:info:build ./arpspoof.c:60: error: too few arguments to function
'libnet_build_ethernet'
:info:build ./arpspoof.c:64: error: 'ETH_H' undeclared (first use in this
function)
:info:build ./arpspoof.c:64: error: (Each undeclared identifier is
reported only once
:info:build ./arpspoof.c:64: error: for each function it appears in.)
:info:build ./arpspoof.c:64: error: too few arguments to function
'libnet_build_arp'
:info:build ./dnsspoof.c: In function 'dns_init':
:info:build ./dnsspoof.c:95: warning: assignment makes pointer from
integer without a cast
:info:build ./arpspoof.c:67: warning: passing argument 1 of 'ether_ntoa'
from incompatible pointer type
:info:build ./arpspoof.c:71: warning: passing argument 1 of 'ether_ntoa'
from incompatible pointer type
:info:build ./arpspoof.c:73: warning: format '%s' expects type 'char *',
but argument 4 has type 'int'
:info:build ./arpspoof.c:73: warning: format '%s' expects type 'char *',
but argument 5 has type 'int'
:info:build ./arpspoof.c:77: warning: passing argument 1 of 'ether_ntoa'
from incompatible pointer type
:info:build ./arpspoof.c:78: warning: format '%s' expects type 'char *',
but argument 4 has type 'int'
:info:build ./arpspoof.c:80: warning: passing argument 1 of 'ether_ntoa'
from incompatible pointer type
:info:build ./arpspoof.c: In function 'arp_find':
:info:build ./arpspoof.c:114: warning: passing argument 2 of
'arp_cache_lookup' from incompatible pointer type
:info:build ./arpspoof.c: In function 'main':
:info:build ./arpspoof.c:181: warning: assignment makes pointer from
integer without a cast
:info:build ./dnsspoof.c: In function 'dns_spoof':
:info:build ./dnsspoof.c:191: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:213: error: 'IP_H' undeclared (first use in this
function)
:info:build ./dnsspoof.c:213: error: (Each undeclared identifier is
reported only once
:info:build ./dnsspoof.c:213: error: for each function it appears in.)
:info:build ./dnsspoof.c:213: error: 'UDP_H' undeclared (first use in this
function)
:info:build ./dnsspoof.c:236: error: 'PRu16' undeclared (first use in this
function)
:info:build ./dnsspoof.c:237: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:238: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:241: warning: passing argument 3 of
'libnet_build_udp' makes integer from pointer without a cast
:info:build ./dnsspoof.c:241: error: too few arguments to function
'libnet_build_udp'
:info:build ./dnsspoof.c:252: warning: passing argument 1 of
'libnet_do_checksum' from incompatible pointer type
:info:build ./dnsspoof.c:252: warning: passing argument 2 of
'libnet_do_checksum' makes pointer from integer without a cast
:info:build ./dnsspoof.c:252: error: too few arguments to function
'libnet_do_checksum'
:info:build ./dnsspoof.c:258: error: dereferencing pointer to incomplete
type
:info:build ./dnsspoof.c:259: error: dereferencing pointer to incomplete
type
:info:build make: *** [arpspoof.o] Error 1
:info:build make: *** Waiting for unfinished jobs....
:info:build ./dnsspoof.c:260: warning: format '%s' expects type 'char *',
but argument 3 has type 'int'
:info:build ./dnsspoof.c:260: warning: format '%s' expects type 'char *',
but argument 5 has type 'int'
:info:build ./dnsspoof.c: In function 'main':
:info:build ./dnsspoof.c:304: warning: format '%s' expects type 'char *',
but argument 6 has type 'int'
:info:build ./dnsspoof.c:316: error: too few arguments to function
'libnet_seed_prand'
:info:build make: *** [dnsspoof.o] Error 1
:info:build shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/work/dsniff-2.3"
&& /usr/bin/make -j2 all " returned error 2
:error:build Target org.macports.build returned: shell command failed
:debug:build Backtrace: shell command failed
while executing
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for dsniff):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
:notice:build Log for dsniff is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/main.log
localhost:~ melody$
--
Ticket URL: <http://trac.macports.org/ticket/25644>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list