[MacPorts] #25812: dynamips-devel does not build

[MacPorts]

#25812: dynamips-devel does not build
------------------------------------+---------------------------------------
 Reporter:  michaelm@…              |       Owner:  macports-tickets@…                   
     Type:  defect                  |      Status:  new                                  
 Priority:  Normal                  |   Milestone:                                       
Component:  ports                   |     Version:  1.9.1                                
 Keywords:                          |        Port:  dynamips-devel                       
------------------------------------+---------------------------------------
 Here is the build log

 {{{

 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libelf 0.8.10_1 exists in the ports tree
 :debug:main libelf 0.8.10_1  is the latest installed
 :debug:main libelf 0.8.10_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libelf
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libelf 0.8.10_1 >= libelf 0.8.10_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_1 exists in the ports tree
 :debug:main gettext 0.18.1.1_1  is the latest installed
 :debug:main gettext 0.18.1.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gettext 0.18.1.1_1 >= gettext 0.18.1.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.13.1_0 exists in the ports tree
 :debug:main libiconv 1.13.1_0  is the latest installed
 :debug:main libiconv 1.13.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.7_0 exists in the ports tree
 :debug:main ncurses 5.7_0 +darwin_10 is the latest installed
 :debug:main ncurses 5.7_0 +darwin_10 is active
 :debug:main Merging existing variants '+darwin_10' into variants
 :debug:main new fully merged portvariants: darwin_10 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Requested variant darwin_10 is not provided by port ncurses.
 :debug:main Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
 though installed variants "+darwin_10" do not match "".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncursesw 5.7_0 exists in the ports tree
 :debug:main ncursesw 5.7_0 +darwin_10 is the latest installed
 :debug:main ncursesw 5.7_0 +darwin_10 is active
 :debug:main Merging existing variants '+darwin_10' into variants
 :debug:main new fully merged portvariants: darwin_10 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Requested variant darwin_10 is not provided by port ncursesw.
 :debug:main Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
 though installed variants "+darwin_10" do not match "".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_0 exists in the ports tree
 :debug:main expat 2.0.1_0  is the latest installed
 :debug:main expat 2.0.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpcap 1.1.1_0 exists in the ports tree
 :debug:main libpcap 1.1.1_0  is the latest installed
 :debug:main libpcap 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libpcap 1.1.1_0 >= libpcap 1.1.1_0
 :msg:main --->  Computing dependencies for dynamips-devel:info:main
 .:debug:main Searching for dependency: libelf
 :debug:main Found Dependency: receipt exists for libelf
 :debug:main Searching for dependency: libpcap
 :debug:main Found Dependency: receipt exists for libpcap
 :msg:main
 :debug:main Executing org.macports.main (dynamips-devel)
 :msg:main --->  Fetching dynamips-devel
 :debug:fetch fetch phase started at Sun Jul 25 08:38:48 HST 2010
 :debug:fetch Executing org.macports.fetch (dynamips-devel)
 :info:fetch --->  dynamips-0.2.8-RC2.tar.gz doesn't seem to exist in
 /opt/local/var/macports/distfiles/dynamips-devel
 :debug:fetch Pinging www.ipflow.utc.fr...
 :debug:fetch Pinging distfiles.macports.org...
 :debug:fetch Pinging aarnet.au.distfiles.macports.org...
 :debug:fetch Pinging lil.fr.distfiles.macports.org...
 :debug:fetch Pinging sea.us.distfiles.macports.org...
 :debug:fetch www.ipflow.utc.fr ping time is 254.487
 :debug:fetch distfiles.macports.org ping time is 92.254
 :debug:fetch aarnet.au.distfiles.macports.org ping time is 268.152
 :debug:fetch lil.fr.distfiles.macports.org ping time is 241.722
 :debug:fetch sea.us.distfiles.macports.org ping time is 10000
 :msg:fetch --->  Attempting to fetch dynamips-0.2.8-RC2.tar.gz from
 http://distfiles.macports.org/dynamips-devel
 :msg:fetch --->  Verifying checksum(s) for dynamips-devel
 :debug:checksum checksum phase started at Sun Jul 25 08:38:53 HST 2010
 :debug:checksum Executing org.macports.checksum (dynamips-devel)
 :info:checksum --->  Checksumming dynamips-0.2.8-RC2.tar.gz
 :debug:checksum Correct (md5) checksum for dynamips-0.2.8-RC2.tar.gz
 :debug:checksum Correct (sha1) checksum for dynamips-0.2.8-RC2.tar.gz
 :msg:checksum --->  Extracting dynamips-devel
 :debug:extract extract phase started at Sun Jul 25 08:38:53 HST 2010
 :debug:extract Executing org.macports.extract (dynamips-devel)
 :info:extract --->  Extracting dynamips-0.2.8-RC2.tar.gz
 :debug:extract setting option extract.args to
 '/opt/local/var/macports/distfiles/dynamips-
 devel/dynamips-0.2.8-RC2.tar.gz'
 :debug:extract Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dynamips-devel/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:extract Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dynamips-devel/work" && /usr/bin/gzip -dc
 '/opt/local/var/macports/distfiles/dynamips-
 devel/dynamips-0.2.8-RC2.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
 :debug:patch patch phase started at Sun Jul 25 08:38:54 HST 2010
 :debug:patch Executing org.macports.patch (dynamips-devel)
 :msg:patch --->  Applying patches to dynamips-devel
 :info:patch --->  Applying
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net
 /dynamips-devel/files/patch-Makefile
 :debug:patch Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dynamips-devel/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:patch Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dynamips-devel/work/dynamips-0.2.8-RC2" &&
 /usr/bin/patch -p0'
 :info:patch patching file Makefile
 :msg:patch --->  Configuring dynamips-devel
 :debug:patch Using compiler 'Mac OS X gcc 4.2'
 :debug:configure configure phase started at Sun Jul 25 08:38:54 HST 2010
 :debug:configure Executing org.macports.configure (dynamips-devel)
 :msg:configure --->  Building dynamips-devel
 :debug:build build phase started at Sun Jul 25 08:38:54 HST 2010
 :debug:build Executing org.macports.build (dynamips-devel)
 :debug:build Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dynamips-devel/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:build Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dynamips-devel/work/dynamips-0.2.8-RC2" &&
 /usr/bin/make -j4 all PREFIX=/opt/local'
 :info:build Linking rom2c
 :info:build Compiling mempool.c
 :info:build Compiling registry.c
 :info:build Compiling rbtree.c
 :info:build Compiling hash.c
 :info:build Compiling sbox.c
 :info:build Compiling utils.c
 :info:build Compiling parser.c
 :info:build Compiling plugin.c
 :info:build Compiling ptask.c
 :info:build Compiling timer.c
 :info:build Compiling crc.c
 :info:build Compiling base64.c
 :info:build Compiling net.c
 :info:build Compiling net_io.c
 :info:build Compiling net_io_bridge.c
 :info:build Compiling net_io_filter.c
 :info:build Compiling atm.c
 :info:build Compiling atm_vsar.c
 :info:build Compiling atm_bridge.c
 :info:build Compiling frame_relay.c
 :info:build Compiling eth_switch.c
 :info:build Compiling dynamips.c
 :info:build Compiling insn_lookup.c
 :info:build insn_lookup.c:319: warning: 'ilt_dump' defined but not used
 :info:build Compiling vm.c
 :info:build Compiling cpu.c
 :info:build vm.c:115: warning: 'vm_object_rebuild_list' defined but not
 used
 :info:build Compiling jit_op.c
 :info:build Compiling mips64.c
 :info:build Compiling mips64_mem.c
 :info:build Compiling mips64_cp0.c
 :info:build mips64_mem.c: In function 'mips64_mts32_slow_lookup':
 :info:build mips64_mem.c:377: warning: label 'err_address' defined but not
 used
 :info:build Compiling mips64_jit.c
 :info:build Compiling mips64_exec.c
 :info:build mips64_jit.c:258: warning: 'insn_jump_find' defined but not
 used
 :info:build Compiling ppc32.c
 :info:build /var/tmp//ccwYLUkA.s:1328:suffix or operands invalid for `mov'
 :info:build Compiling ppc32_mem.c
 :info:build make: *** [mips64_jit.o] Error 1
 :info:build make: *** Waiting for unfinished jobs....
 :info:build shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dynamips-devel/work/dynamips-0.2.8-RC2" &&
 /usr/bin/make -j4 all PREFIX=/opt/local " returned error 2
 :error:build Target org.macports.build returned: shell command failed
 :debug:build Backtrace: shell command failed
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: the following items did not execute (for dynamips-
 devel): org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 :notice:build Log for dynamips-devel is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports
 .org_release_ports_net_dynamips-devel/main.log
 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/25812>
MacPorts <http://www.macports.org/>
Ports system for Mac OS